Mesoporous carbon structure impregnated with 2D engineered zirconium: A sustainable adsorbent for the removal of dyes from the aqueous solution.

The key designing of new breeds of the adsorbents aimed to improve the physical, chemical and textural morphology along with surface functionalization, selectivity toward the contaminants, and regenerations efficiency. In this aspect, two adsorbents named wet oxidative and ultrasonicated zirconium impregnated composite, have been synthesized through two routes, i.e., wet oxidation and ultrasonication. In wet oxidation method, carbon-based materials are oxidized using an oxidant followed by impregnation, while in ultrasonication assisted route, the impregnation is carried out using acoustic phenomenon. The characterization study revealed that the wet oxidation process is more competent in impregnating zirconium and developing diverse porosity and functionalities. The maximum adsorption capacity of wet oxidative adsorbent was 812 mg/g for Reactive Blue 19 and 203.18 mg/g for Methylene Blue, that accentuated the efficiency of the adsorbent over raw activated carbon. The electrostatic interaction, hydrogen-bonding and ligand exchange phenomenon are the involved adsorption mechanism for dyes. The regeneration study finally asserts that the wet oxidative adsorbent shows an insignificant decrease in its capacity up to the 5th-cycle (i.e., 87.67% removal at 5th cycle) as compared to raw AC (46.71% removal at 5th cycle). Further, a continuous fixed-bed column study revealed a significant correlation between experimental breakthrough data and kinetic data. Thus, the developed adsorbent has a sedulous adsorption capacity to remove the most stubborn toxic dyes and can be used in industrial-scale applications.

Understanding the toxicity effect and mineralization efficiency of in-situ electrogenerated chlorine dioxide for the treatment of priority pollutants of coking wastewater.

Oxidation of phenol, cyanide and aniline have been analyzed by the enhanced electro-oxidation process in which sodium chlorite was used as an electrolyte and results were validated using statistical tool based on Box-Behnken design. The mineralization efficiency of 78.4%, and 98.18% were predicted at optimized variables condition for phenol, and aniline respectively, whereas complete mineralization has been observed for the cyanide at the optimized conditions, which describes the significance of the design model approach.The process mineralizes the higher phenol concentration revealing a drastic reduction in power consumption in comparison of direct oxidation, i.e., 799.36 kWh/kg to 138.18 kWh/kg for more than 90% mineralization of phenol even at a higher current density of 13.63 mA/cm2. The kinetic modelling approach justified that higher current density has also played a role in higher mineralization of pollutants at the specific operating conditions. The by-product formation and toxicity effect on microalgae in wastewater were assessed by the full scan mass spectrometry and microalgae pigment inhibition test after the electro-oxidation of coking wastewater. The pigment growth inhibition rate of Chlorella sp. NCQ and Micractinium sp. NCS2 suggests that sodium chlorite as an electrolyte aid can also effectively used as an oxidizing agent and algal inhibiter in the coking wastewater.

Synthesis, characterization and sorption studies of a zirconium(iv) impregnated highly functionalized mesoporous activated carbons.

This study aimed to develop a highly functionalized adsorbent material for the removal of persistent anionic reactive dye. The modification process was commenced via a wet oxidation method by using zirconium salt as an impregnating material. The process led to an increase in the overall porosity, thermal stability and its oxidative functionality. The newly synthesised material was named ZrAC. The morphological and textural images revealed the irregular and eroded structures with an increase in porosity of the modified adsorbent. The results of chemical and spectral analysis disclosed that the material had successfully gained the oxidative functionality over the surface that will favour the removal of anionic dye. Equilibrium isotherms and adsorption kinetics studies insinuate that the overall process of adsorption follows the Sips isotherm and pseudo-second order kinetic model, respectively. The monolayer adsorption capacity of ZrAC was found to be superior (506 mg g-1) to AC at 500 mg L-1 concentration of persistent reactive dye. Moreover, the desorption capabilities of ZrAC were found to be more prominent, which finally affirms its potential use in a continuous flow system as a reusable adsorbent. Additionally, the stability of zirconium, corroborated from ICP-MS and XPS data, revealed the stability of zirconium after adsorption cycles thus verified its reusability. Thus, the characterization and experimental results of ZrAC strongly advocated its potential as a future adsorbent for removal of reactive dyes.

Decolorization of reactive dye Remazol Brilliant Blue R by zirconium oxychloride as a novel coagulant: optimization through response surface methodology.

The aim of the present study was to investigate the performance of a novel coagulant, i.e. ZrOCl2, for the removal of anthraquinone-based reactive dye from aqueous solution. An ideal experimental setup was designed based on central composite design using response surface methodology to determine the individual and interactive effects of different operational variables (i.e. pH, coagulant dose and dye concentration) on treatment performance in terms of dye and chemical oxygen demand (COD) removal efficiencies. Total 92.58% dye and 85.33% COD removal were experimentally attained at optimized conditions at low coagulant dose, i.e. 156.67 mg/L for the dye concentration of 105.67 mg/L at pH 2. To validate the working pH of the metal coagulant, the static charge of ZrOCl2 was measured using Eh value. The performance of the coagulant was validated with experimental and predicted values in the selected data set, and R2 values for both responses were found to be 0.99 and 0.95 respectively, which shows the reliability of the experimental design. Further, the toxicity of the coagulant was assessed and no such toxicity was found even up to the concentration of 500 mg/L, proclaiming the disposal of sludge may not exhibit any threat to humans. Experimental results suggested that the ZrOCl2 could be used as an eco-friendly coagulant for dye wastewater treatment.