Advanced CT Imaging for the Assessment of Calcific Coronary Artery Disease and PCI Planning.

Vascular calcification is a hallmark of atherosclerosis and adds considerable challenges for percutaneous coronary intervention (PCI). This review underscores the critical role of coronary computed tomography (CT) angiography in assessing and quantifying vascular calcification for optimal PCI planning. Severe calcification significantly impacts procedural outcomes, necessitating accurate preprocedural evaluation. We describe the potential of coronary CT for calcium assessment and how CT may enhance precision in device selection and procedural strategy. These advancements, along with the ongoing Precise Procedural and PCI Plan study, represent a transformative shift toward personalized PCI interventions, ultimately improving patient outcomes in the challenging landscape of calcified coronary lesions.

Influence of Pathophysiologic Patterns of Coronary Artery Disease on Immediate Percutaneous Coronary Intervention Outcomes.

BACKGROUND: Diffuse coronary artery disease affects the safety and efficacy of percutaneous coronary intervention (PCI). Pathophysiologic coronary artery disease patterns can be quantified using fractional flow reserve (FFR) pullbacks incorporating the pullback pressure gradient (PPG) calculation. This study aimed to establish the capacity of PPG to predict optimal revascularization and procedural outcomes. METHODS: This prospective, investigator-initiated, single-arm, multicenter study enrolled patients with at least one epicardial lesion with an FFR ≤0.80 scheduled for PCI. Manual FFR pullbacks were used to calculate PPG. The primary outcome of optimal revascularization was defined as an FFR ≥0.88 after PCI. RESULTS: A total of 993 patients with 1044 vessels were included. The mean FFR was 0.68±0.12, PPG 0.62±0.17, and the post-PCI FFR was 0.87±0.07. PPG was significantly correlated with the change in FFR after PCI (r=0.65 [95% CI, 0.61-0.69]; P<0.001) and demonstrated excellent predictive capacity for optimal revascularization (area under the receiver operating characteristic curve, 0.82 [95% CI, 0.79-0.84]; P<0.001). FFR alone did not predict revascularization outcomes (area under the receiver operating characteristic curve, 0.54 [95% CI, 0.50-0.57]). PPG influenced treatment decisions in 14% of patients, redirecting them from PCI to alternative treatment modalities. Periprocedural myocardial infarction occurred more frequently in patients with low PPG (<0.62) compared with those with focal disease (odds ratio, 1.71 [95% CI, 1.00-2.97]). CONCLUSIONS: Pathophysiologic coronary artery disease patterns distinctly affect the safety and effectiveness of PCI. PPG showed an excellent predictive capacity for optimal revascularization and demonstrated added value compared with an FFR measurement. REGISTRATION: URL: https://www.clinicaltrials.gov; Unique identifier: NCT04789317.

The Influence of Epicardial Resistance on Microvascular Resistance Reserve.

BACKGROUND: The optimal index of microvascular function should be specific for the microvascular compartment. Yet, coronary flow reserve (CFR), despite being widely used to diagnose coronary microvascular dysfunction (CMD), is influenced by both epicardial and microvascular resistance. Conversely, microvascular resistance reserve (MRR) adjusts for fractional flow reserve (FFR), and thus is theoretically independent of epicardial resistance. OBJECTIVES: The authors tested the hypothesis that MRR, unlike CFR, is not influenced by increasing epicardial resistance, and thus is a more specific index of microvascular function. METHODS: In a cohort of 16 patients who had undergone proximal left anterior descending artery stenting, we created 4 grades of artificial stenosis (no stenosis, mild, moderate, and severe) using a coronary angioplasty balloon inflated to different degrees within the stent. For each stenosis grade, we calculated CFR and MRR using continuous thermodilution (64 measurements of each) to assess their response to changing epicardial resistance. RESULTS: Graded balloon inflation resulted in a significant sequential decrease in mean FFR (no stenosis: 0.82 ± 0.05; mild: 0.72 ± 0.04; moderate: 0.61 ± 0.05; severe: 0.48 ± 0.09; P < 0.001). This translated into a linear decrease in mean hyperemic coronary flow (no stenosis: 170.5 ± 66.8 mL/min; mild: 149.8 ± 58.8 mL/min; moderate: 124.4 ± 53.0 mL/min; severe: 94.0 ± 45.2 mL/min; P < 0.001). CFR exhibited a marked linear decrease with increasing stenosis (no stenosis: 2.5 ± 0.9; mild: 2.2 ± 0.8; moderate: 1.8 ± 0.7; severe: 1.4 ± 0.6), corresponding to a decrease of 0.3 for a decrease in FFR of 0.1 (P < 0.001). In contrast, MRR exhibited a negligible decrease across all stenosis grades (no stenosis: 3.0 ± 1.0; mild: 3.0 ± 1.0; moderate: 2.9 ± 1.0; severe: 2.8 ± 1.0), corresponding to a decrease of just 0.05 for a decrease in FFR of 0.1 (P < 0.001). CONCLUSIONS: MRR, unlike CFR, is minimally influenced by epicardial resistance, and thus should be considered the more specific index of microvascular function. This suggests that MRR can also reliably evaluate microvascular function in patients with significant epicardial disease.

Stent sizing by coronary CT angiography compared with optical coherence tomography.

BACKGROUND: Coronary CT angiography (CCTA) is well-established for diagnosis and stratification of coronary artery disease (CAD). Its usefulness in guiding percutaneous coronary interventions (PCI) and stent sizing is unknown. METHODS: This is a sub-analysis of the Precise Percutaneous Coronary Intervention Plan (P3) study (NCT03782688). We analyzed 65 vessels with matched CCTA and pre-PCI optical coherence tomography (OCT) assessment. The CCTA-guided stent size was defined by the mean distal reference lumen diameter rounded up to the nearest stent diameter. The OCT lumen-guided stent size was the mean distal reference lumen diameter rounded to the closest stent diameter. The agreement on stent diameters was determined with Kappa statistics, Passing-Bablok regression analysis, and the Bland-Altman method. RESULTS: The distal reference lumen diameter by CCTA and OCT were 2.75 â€‹± â€‹0.53 â€‹mm and 2.72 â€‹± â€‹0.55 â€‹mm (mean difference 0.06, limits of agreement -0.7 to 0.82). There were no proportional or systematic differences (coefficient A 1.06, 95% CI 0.84 to 1.3 and coefficient B -0.22, 95% CI -0.83 to 0.36) between methods. The agreement between the CCTA and OCT stent size was substantial (Cohen's weighted Kappa 0.74, 95% CI 0.64 to 0.85). Compared to OCT stent diameter, CCTA stent size was concordant in 52.3% of the cases; CCTA overestimated stent size in 20.0% and underestimated in 27.7%. CONCLUSION: CCTA accurately assessed the reference vessel diameter used for stent sizing. CCTA-based stent sizing showed a substantial agreement with OCT. CCTA allows for PCI planning and may aid in selecting stent diameter.

Impact of vessel volume on thermodilution measurements in patients with coronary microvascular dysfunction.

BACKGROUND: Two invasive methods are available to estimate microvascular resistance: bolus and continuous thermodilution. Comparative studies have revealed a lack of concordance between measurements of microvascular resistance obtained through these techniques. AIMS: This study aimed to examine the influence of vessel volume on bolus thermodilution measurements. METHODS: We prospectively included patients with angina with non-obstructive coronary arteries (ANOCA) undergoing bolus and continuous thermodilution assessments. All patients underwent coronary CT angiography to extract vessel volume. Coronary microvascular dysfunction was defined as coronary flow reserve (CFR) < 2.0. Measurements of absolute microvascular resistance (in Woods units) and index of microvascular resistance (IMR) were compared before and after volumetric adjustment. RESULTS: Overall, 94 patients with ANOCA were included in this study. The mean age was 64.7 ± 10.8 years, 48% were female, and 19% had diabetes. The prevalence of CMD was 16% based on bolus thermodilution, while continuous thermodilution yielded a prevalence of 27% (Cohen's Kappa 0.44, 95% CI 0.23-0.65). There was no correlation in microvascular resistance between techniques (r = 0.17, 95% CI -0.04 to 0.36, p = 0.104). The adjustment of IMR by vessel volume significantly increased the agreement with absolute microvascular resistance derived from continuous thermodilution (r = 0.48, 95% CI 0.31-0.63, p < 0.001). CONCLUSIONS: In patients with ANOCA, invasive methods based on coronary thermodilution yielded conflicting results for the assessment of CMD. Adjusting IMR with vessel volume improved the agreement with continuous thermodilution for the assessment of microvascular resistance. These findings strongly suggest the importance of considering vessel volume when interpreting bolus thermodilution assessment.

Intravascular Imaging Findings After PCI in Patients With Focal and Diffuse Coronary Artery Disease.

BACKGROUND: Following percutaneous coronary intervention (PCI), optical coherence tomography provides prognosis information. The pullback pressure gradient is a novel index that discriminates focal from diffuse coronary artery disease based on fractional flow reserve pullbacks. We sought to investigate the association between coronary artery disease patterns, defined by coronary physiology, and optical coherence tomography after stent implantation in stable patients undergoing PCI. METHODS AND RESULTS: This multicenter, prospective, single-arm study was conducted in 5 countries (NCT03782688). Subjects underwent motorized fractional flow reserve pullbacks evaluation followed by optical coherence tomography-guided PCI. Post-PCI optical coherence tomography minimum stent area, stent expansion, and the presence of suboptimal findings such as incomplete stent apposition, stent edge dissection, and irregular tissue protrusion were compared between patients with focal versus diffuse disease. Overall, 102 patients (105 vessels) were included. Fractional flow reserve before PCI was 0.65±0.14, pullback pressure gradient was 0.66±0.14, and post-PCI fractional flow reserve was 0.88±0.06. The mean minimum stent area was 5.69±1.99 mm2 and was significantly larger in vessels with focal disease (6.18±2.12 mm2 versus 5.19±1.72 mm2, P=0.01). After PCI, incomplete stent apposition, stent edge dissection, and irregular tissue protrusion were observed in 27.6%, 10.5%, and 51.4% of the cases, respectively. Vessels with focal disease at baseline had a lower prevalence of incomplete stent apposition (11.3% versus 44.2%, P=0.002) and more irregular tissue protrusion (69.8% versus 32.7%, P<0.001). CONCLUSIONS: Baseline coronary pathophysiological patterns are associated with suboptimal imaging findings after PCI. Patients with focal disease had larger minimum stent area and a higher incidence of tissue protrusion, whereas stent malapposition was more frequent in patients with diffuse disease.

Measuring Absolute Coronary Flow and Microvascular Resistance by Thermodilution: JACC Review Topic of the Week.

Diagnosing coronary microvascular dysfunction remains challenging, primarily due to the lack of direct measurements of absolute coronary blood flow (Q) and microvascular resistance (Rµ). However, there has been recent progress with the development and validation of continuous intracoronary thermodilution, which offers a simplified and validated approach for clinical use. This technique enables direct quantification of Q and Rµ, leading to precise and accurate evaluation of the coronary microcirculation. To ensure consistent and reliable results, it is crucial to follow a standardized protocol when performing continuous intracoronary thermodilution measurements. This document aims to summarize the principles of thermodilution-derived absolute coronary flow measurements and propose a standardized method for conducting these assessments. The proposed standardization serves as a guide to ensure the best practice of the method, enhancing the clinical assessment of the coronary microcirculation.

Predictors of percutaneous coronary intervention derived from CCTA in patients with chronic coronary syndrome.

BACKGROUND: To identify anatomical and morphological plaque features predictors of PCI and create a multiparametric score to increase the predictive yield. Moreover, we assessed the incremental predictive value of FFRCT (Fractional Flow Reserve derived from CCTA) trans-lesion gradient (ΔFFRCT) when integrated into the score. METHODS: Observational cohort study including patients undergoing CCTA for suspected coronary artery disease, with FFRCT available, referred to invasive coronary angiogram and assessment of fractional flow reserve. Plaque analysis was performed using validated semi-automated software. Logistic regression was performed to identify anatomical and morphological plaque features predictive of PCI. Optimal thresholds were defined by area under the receiver-operating characteristics curve (AUC) analysis. A scoring system was developed in a derivation cohort (70 â€‹% of the study population) and tested in a validation cohort (30 â€‹% of patients). RESULTS: The overall study population included 340 patients (455 vessels), among which 238 patients (320 vessels) were included in the derivation cohort. At multivariate logistic regression analysis, absence of left main disease, diameter stenosis (DS), non-calcified plaque (NCP) volume, and percent atheroma volume (PAV) were independent predictors of PCI. Optimal thresholds were: DS â€‹≥ â€‹50 â€‹%, volume of NCP>113 â€‹mm3 and PAV>17 â€‹%. A weighted score (CT-PCI Score) ranging from 0 to 11 was obtained. The AUC of the score was 0.80 (95%CI 0.74-0.86). The integration of ΔFFRCT in the CT-PCI score led to a mild albeit not significant increase in the AUC (0.82, 95%CI 0.77-0.87, p â€‹= â€‹0.328). CONCLUSIONS: Plaque anatomy and morphology derived from CCTA could aid in identifying patients amenable to PCI.

Head-to-head comparison of two angiography-derived fractional flow reserve techniques in patients with high-risk acute coronary syndrome: A multicenter prospective study.

BACKGROUND: FFRangio and QFR are angiography-based technologies that have been validated in patients with stable coronary artery disease. No head-to-head comparison to invasive fractional flow reserve (FFR) has been reported to date in patients with acute coronary syndromes (ACS). METHODS: This study is a subset of a larger prospective multicenter, single-arm study that involved patients diagnosed with high-risk ACS in whom 30-70% stenosis was evaluated by FFR. FFRangio and QFR - both calculated offline by 2 different and blinded operators - were calculated and compared to FFR. The two co-primary endpoints were the comparison of the Pearson correlation coefficient between FFRangio and QFR with FFR and the comparison of their inter-observer variability. RESULTS: Among 134 high-risk ACS screened patients, 59 patients with 84 vessels underwent FFR measurements and were included in this study. The mean FFR value was 0.82 ± 0.40 with 32 (38%) being ≤0.80. The mean FFRangio was 0.82 ± 0.20 and the mean QFR was 0.82 ± 0.30, with 27 (32%) and 25 (29%) being ≤0.80, respectively. The Pearson correlation coefficient was significantly better for FFRangio compared to QFR, with R values of 0.76 and 0.61, respectively (p = 0.01). The inter-observer agreement was also significantly better for FFRangio compared to QFR (0.86 vs 0.79, p < 0.05). FFRangio had 91% sensitivity, 100% specificity, and 96.8% accuracy, while QFR exhibited 86.4% sensitivity, 98.4% specificity, and 93.7% accuracy. CONCLUSION: In patients with high-risk ACS, FFRangio and QFR demonstrated excellent diagnostic performance. FFRangio seems to have better correlation to invasive FFR compared to QFR but further larger validation studies are required.

Influence of intracoronary hemodynamic forces on atherosclerotic plaque phenotypes.

BACKGROUND AND AIMS: Coronary hemodynamics impact coronary plaque progression and destabilization. The aim of the present study was to establish the association between focal vs. diffuse intracoronary pressure gradients and wall shear stress (WSS) patterns with atherosclerotic plaque composition. METHODS: Prospective, international, single-arm study of patients with chronic coronary syndromes and hemodynamic significant lesions (fractional flow reserve [FFR] ≤ 0.80). Motorized FFR pullback pressure gradient (PPG), optical coherence tomography (OCT), and time-average WSS (TAWSS) and topological shear variation index (TSVI) derived from three-dimensional angiography were obtained. RESULTS: One hundred five vessels (median FFR 0.70 [Interquartile range (IQR) 0.56-0.77]) had combined PPG and WSS analyses. TSVI was correlated with PPG (r = 0.47, [95% Confidence Interval (95% CI) 0.30-0.65], p < 0.001). Vessels with a focal CAD (PPG above the median value of 0.67) had significantly higher TAWSS (14.8 [IQR 8.6-24.3] vs. 7.03 [4.8-11.7] Pa, p < 0.001) and TSVI (163.9 [117.6-249.2] vs. 76.8 [23.1-140.9] m-1, p < 0.001). In the 51 vessels with baseline OCT, TSVI was associated with plaque rupture (OR 1.01 [1.00-1.02], p = 0.024), PPG with the extension of lipids (OR 7.78 [6.19-9.77], p = 0.003), with the presence of thin-cap fibroatheroma (OR 2.85 [1.11-7.83], p = 0.024) and plaque rupture (OR 4.94 [1.82 to 13.47], p = 0.002). CONCLUSIONS: Focal and diffuse coronary artery disease, defined using coronary physiology, are associated with differential WSS profiles. Pullback pressure gradients and WSS profiles are associated with atherosclerotic plaque phenotypes. Focal disease (as identified by high PPG) and high TSVI are associated with high-risk plaque features. CLINICAL TRIAL REGISTRATION: https://clinicaltrials,gov/ct2/show/NCT03782688.

Coronary CT Angiography in the Cath Lab: Leveraging Artificial Intelligence to Plan and Guide Percutaneous Coronary Intervention.

The role of coronary CT angiography for the diagnosis and risk stratification of coronary artery disease is well established. However, its potential beyond the diagnostic phase remains to be determined. The current review focuses on the insights that coronary CT angiography can provide when planning and performing percutaneous coronary interventions. We describe a novel approach incorporating anatomical and functional pre-procedural planning enhanced by artificial intelligence, computational physiology and online 3D CT guidance for percutaneous coronary interventions. This strategy allows the individualisation of patient selection, optimisation of the revascularisation strategy and effective use of resources.