Circularly Polarized Organic Light-Emitting Diodes Based on Chiral Hole Transport Enantiomers.

The circularly polarized organic light-emitting diodes (CP-OLEDs) demonstrate promising application in 3D display due to the direct generation of circularly polarized electroluminescence (CPEL). But the chiral luminescence materials face challenges as intricated synthetic route, enantiomeric separation, etc. Herein, fresh CP-OLEDs are designed based on chiral hole transport material instead of chiral emitters. A pair of hole transport enantiomers (R/S-NPACZ) exhibit intense dissymmetry factors (|gPL|) about 5.0 × 10-3. With R/S-NPACZ as hole transport layers, CP-OLEDs are fabricated employing six achiral phosphorescence and thermally activated delayed fluorescence (TADF) materials with different wavelengths, in consistence with the generated CPEL spectra. The CP-OLEDs based on achiral red, green, and blue iridium(III) complexes exhibit external quantum efficiencies (EQEs) of 14.9%, 30.7%, and 14.1% with |gEL| factors of 8.8 × 10-4, 2.3 × 10-3, and 2.0 × 10-3, respectively. Moreover, the devices using achiral blue, blueish-green, and green TADF materials display EQEs of 24.1%, 17.9%, and 25.4% with |gEL| factors of 1.0 × 10-3, 3.6 × 10-3, and 2.2 × 10-3, respectively. As far as known, it is the first example of CP-OLEDs based on chiral hole transport materials, which act as the organic circularly polarizers and have potential to generate CPEL from achiral luminescence materials.

A Configurationally Confined Thermally Activated Delayed Fluorescent Two-Coordinate CuI Complex for Efficient Blue Electroluminescence.

Thermally activated delayed fluorescence (TADF) from linear two-coordinate coinage metal complexes is sensitive to the geometric arrangement of the ligands. Herein we realize the tuning of configuration from coplanar to orthogonal gradually by variation of substituents. In a complex with confined twist configuration, its blue emission peaking at 458 nm presents a high ΦPL of 0.74 and a short τTADF of 1.9 µs, which indicates a fast enough kr,TADF of 3.9×105  s-1 and a depressed knr of 1.4×105  s-1 . Such outstanding luminescent properties are attributed to the proper overlap of HOMO and LUMO on CuI d orbitals that guarantees not only small ΔEST but also sufficient transition oscillator strength for fast k r , S 1 ${{k}_{{\rm r},{{\rm S}}_{1}}}$ . Vacuum-deposited blue OLEDs with either doped or host-free emissive layer present external quantum efficiencies over 20 % and 10 %, respectively, demonstrating the practicality of the configurationally confined strategy for efficient linear CuI TADF emitters.

Multiple-Resonance-Induced Thermally Activated Delayed Fluorescence Materials Based on Indolo[3,2,1-jk]carbazole with an Efficient Narrowband Pure-Green Electroluminescence.

Herein, we report two multiple-resonance thermally activated delayed fluorescence emitters (VTCzBN and TCz-VTCzBN) based on indolo[3,2,1-jk]carbazole unit and boron-nitrogen skeletons, whose emissions peaking at 496 and 521 nm with full width at half maximum of 34 and 29 nm, respectively. Meanwhile, fast rate constants of reverse intersystem crossing of above 106  s-1 are obtained due to small singlet-triplet energy gaps and large spin-orbital coupling values. Notably, planar molecular structures along the transition dipole moment direction endow them with high horizontal emitting dipole ratios of up to 94 %. Consequently, the corresponding organic light-emitting diodes (OLEDs) show the maximum external quantum efficiencies of 31.7 % and 32.2 %, respectively. Particularly, OLED with TCz-VTCzBN display ultra-pure green emission with Commission Internationale de l'Eclairage coordinates of (0.22, 0.71), consistent with the green display standard of the National Television System Committee.

Circularly Polarized White Organic Light-Emitting Diodes Based on Spiro-Type Thermally Activated Delayed Fluorescence Materials.

In this study, we report the first circularly polarized white organic light-emitting diodes (CP-WOLEDs) based on all thermally activated delayed fluorescence (TADF) materials. Two pairs of spiro-type TADF enantiomers, (R/S)-SPOCN (5,5'-((2,2',3,3'-tetrahydro-1,1'-spirobi[indene]-7,7'-diyl)bis(oxy))bis(4-(10H-phenoxazin-10-yl)phthalonitrile)) and (R/S)-OSFSO (2'-(trifluoromethyl)-spiro[quinolino[3,2,1-kl]phenoxazine-9,9'-thioxanthene]-10',10'-dioxide), serve as emitters with complementary emission. The CP-OLEDs exhibit warm white emission with a CIE coordinate of (0.35, 0.46). Besides, decent device performances are observed with an external quantum efficiency of up to 21.6 % at maximum and 11.8 % at 1000 cd m-2 . Obvious circularly polarized electroluminescence signals are detected with a dissymmetry factor |gEL | of around 3.0×10-3 . This is the first report of CP-WOLEDs that can harvest both singlet and triplet excitons, which provides a feasible strategy for the development of CP-WOLEDs with remarkable device performances.

Chiral Spiro-Axis Induced Blue Thermally Activated Delayed Fluorescence Material for Efficient Circularly Polarized OLEDs with Low Efficiency Roll-Off.

A spiro-axis skeleton not only introduces circularly polarized luminescence (CPL) into thermally activated delayed fluorescence (TADF) molecules but also enhances the intramolecular through space charge transfer (TSCT) process. Spiral distributed phenoxazine and 2-(trifluoromethyl)-9H-thioxanthen-9-one-10,10-dioxide act as donor and acceptor units, respectively. The resulting TADF enantiomers, (rac)-OSFSO, display emission maxima at 470 nm, small singlet-triplet energy gap (ΔEST ) of 0.022 eV and high photoluminescence quantum yield (PLQY) of 81.2 % in co-doped film. The circularly polarized OLEDs (CP-OLEDs) based on (R)-OSFSO and (S)-OSFSO display obvious circularly polarized electroluminescence (CPEL) signals with dissymmetry factor up to 3.0×10-3 and maximum external quantum efficiency (EQEmax ) of 20.0 %. Moreover, the devices show remarkably low efficiency roll-off with an EQE of 19.3 % at 1000 cd m-2 (roll-off ca. 3.5 %), which are among the top results of CP-OLEDs.