Hydroxylation of the indium tin oxide electrode promoted by surface bubbles.

Adherent bubbles at electrodes are generally treated as reaction penalties. Herein, in situ hydroxylation of indium tin oxide surfaces can be easily achieved by applying a constant potential of +1.0 V in the presence of bubbles. Its successful hydroxylation is further demonstrated by preparing a ferrocene-terminated film, which is confirmed by cyclic voltammetry and X-ray photoelectron spectroscopy.

Preparation of uniform lignin/titanium dioxide nanoparticles by confined assembly: A multifunctional nanofiller for a waterborne polyurethane wood coating.

We report a facile synthesis for lignin/titanium dioxide (TiO2) nanoparticles (LT NPs) at room temperature by confining assembly of lignin macromolecules. The LT NPs had a uniform nanosize distribution (average diameter âˆ¼ 68 nm) and were directly employed as multifunctional nanofillers to reinforce a waterborne polyurethane wood coating (WBC). X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy revealed the mechanism by which formed TiO2 confined lignin assembly. The LT NPs considerably increased the tensile strength of a WBC film from 16.3 MPa to 28.1 MPa. The WBC-LT NPs exhibited excellent ultraviolet (UV) A and UVB blocking performances of 87 % and 98 %, respectively, while maintaining 94 % transmittance in the visible region. Incorporating LT NPs into the WBC enhanced the coating performance (the hardness, adhesion, and abrasion resistance) on wood substrates. A quantitative color and texture analysis revealed that the LT NPs increased the decorativeness of actual wooden products. After nearly 1800 h of UV irradiation, wood coated with the WBC-LT NPs exhibited good color stability, where the original color remained unchanged or even became brighter. In this study, value-added valorization of lignin is enabled by using organic-inorganic nanofillers and insights are gained into developing multifunctional WBCs.

Efficient extraction of nanocellulose from lignocellulose using aqueous butanediol fractionation to improve the performance of waterborne wood coating.

The highly efficient extraction of cellulose from lignocellulose with an excellent yield of 95.2 % and purity of 96.7 % was demonstrated using acid-catalyzed fractionation with aqueous butanediol. This cellulose was subsequently transformed into cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs) with specific dimensions and surface functional groups through various chemomechanical treatments. The average diameters of CNFs and CNCs produced by sulfuric acid hydrolysis-ultrasonication and deep eutectic solvent treatment-ultrasonication (DES-CNCs) were 29.7, 21.9 and 17.3 nm, respectively. The DES-CNCs were obtained in a good yield of 71 ± 1.27 wt% and exhibited a high zeta potential of -33.5 ± 2.51 mV following posthydrolysis and esterification during the DES treatment. These CNFs and CNCs were used as nanofillers in a waterborne wood coating (WWC), which significantly improved its dynamic viscosity and storage modulus. The addition of these materials also enhanced the mechanical strength of the WWC but had little effect on transmittance. Glossiness, hardness, abrasion resistance and adhesion strength were evaluated, and the DES-CNCs provided the greatest improvements at a low concentration. A plausible reinforcement mechanism was presented. This work provided an efficient cellulose extraction method and detailed structure elucidation of the nanocellulose together with suggestions for value-added applications of cellulosic nanofillers for reinforcing WWC.

Developing an Electrochemically Reversible Switch for Modulating the Optical Signal of Gold Nanoparticles.

Gold nanoparticles (AuNPs) possess remarkable optical properties and electrical conductivity, making them highly relevant in various fields such as medical diagnoses, biological imaging, and electronic sensors. However, the existing methods for modulating the optical properties of AuNPs are often under limitations such as a high cost, the complexity of detection, a narrow range of application settings, and irreversibility. In this study, we propose a novel approach to address these challenges by constructing a reversible electrochemical switch. The switch (ITO-OMAD) involves covalently linking nitroxide radicals and AuNPs (AuNPs-NO•), followed by tethering this nanocomposite to a siloxane-derived indium tin oxide (ITO) electrode. By simply electrochemically oxidizing/reducing the nitroxide units, one is able to reversibly modulate the optical properties of AuNPs at will. The surface morphology and structure of the as-prepared ITO-OMAD electrode were characterized through scanning electron microscopy (SEM) and cyclic voltammetry (CV). SEM imaging confirmed the successful anchoring of AuNPs on the ITO electrode. Electrochemical tests performed in the three-electrode system demonstrated that the local surface plasmon resonance (LSPR) of AuNPs can be reversibly regulated by alternatively imposing ± 0.5V (vs. Ag/AgCl) to the modified electrode. The development of this electrochemical switch presents a novel approach to effectively control the optical properties of AuNPs. The further exploration and utilization of this reversible electrochemical switch could significantly enhance the versatility and practicality of AuNPs in numerous applications.

Chiral Discrimination of Penicillamine Enantiomers: The Role of Aggregation-Caused Quenching in Achieving High Selectivity.

The recognition and separation of chiral isomers are of great importance in both industrial and biological applications. In this study, a chiral recognition system based on electrochemiluminescence was established for the detection of penicillamine (PA) enantiomers. The system utilized a homochiral [Zn2(BDC)(d-lac)] (Zn-BL) platform for the uniform distribution of Ru(bpy)32+ nanoparticles, effectively mitigating aggregation-caused quenching. The chiral recognition ability of Zn-BL was tested to distinguish between PA enantiomers, and the results indicated a substantial increase in the chiral electrochemiluminescence (ECL) signal when l-PA was present, in contrast to d-PA. The mechanism underlying ECL chiral discrimination was investigated using water contact angle measurements, DFT calculations, and electrochemical characterization. The system exhibited high selectivity, stability, and reproducibility for PA enantiomer detection. Furthermore, the proposed method can accurately identify one enantiomer of PA in a mixture. This study provides a reliable and sensitive approach for achieving the highly selective detection of chiral molecules.

Efficient downstream valorization of lignocellulose after organosolv fractionation: Synergistic enhancement of waterborne coatings by co-assembled lignin@cellulose nanocrystals.

The simultaneous downstream valorization of cellulose and lignin is an important aspect of efficiently extracting value from lignocellulose. The present work, we demonstrated the preparation of a novel bio-based filler by the co-assembly of cellulose and lignin obtained from a one-pot ethanosolv lignocellulose fractionation process. The cellulose was valorized by forming cellulose nanocrystals (CNCs) through simple bleaching and ultrasonication processes. The lignin fractions demonstrated greater solubility (19.2 mg/mL) and lower molecular weight (6980 g/mol) than conventional industrial lignins. Various lignin@CNCs specimens were prepared via a facile co-assembly of the lignin and CNCs. These entirely bio-based materials could be used as a multifunctional filler to enhance the properties of a waterborne coating (WBC). Specifically, the mechanical properties, coating performance and ultraviolet resistance of a WBC were all significantly improved, demonstrating a synergistic enhancement effect obtained from the CNCs and lignin. In this manner, both cellulose and lignin components were efficiently transformed to value-added fillers for WBC, demonstrating a highly efficient pathway for lignocellulose utilization and downstream value-added applications.

C6N3: A novel 2D carbon nitride with sp-N as support for efficient hydrogen production.

Two-dimensional (2D) carbon nitrides (CxNy) have great potential in advanced fields such as energy harvest and storage. We report a novel 2D CxNy, C6N3, comprising sp-N and sp2-C atoms. Density functional theory calculations indicate that electronically, thermally, and dynamically stable C6N3 is metallic even when cut into very narrow nanoribbons. C6N3 adsorbed single atoms of 3d, 4d, and 5d transition metals to fabricate single-atom catalysts (SACs) for an electrocatalytic hydrogen evolution reaction (HER). Among all SACs studied, Ti-, Cr-, Zr-, and Hf-embedded C6N3 had excellent overall performance including promising stability, moderate binding strength of H and H2, and good electrical conductivity. Our results suggest a novel C6N3 with an sp-N skeleton that has great potential for HER. More investigations are needed to further understand the properties and applications of C6N3 in other fields.

Improved Differentiation Ability and Therapeutic Effect of miR-23a-3p Expressing Bone Marrow-Derived Mesenchymal Stem Cells in Mice Model with Acute Lung Injury.

BACKGROUND AND OBJECTIVES: Implantation of bone marrow-derived mesenchymal stem cells (BMSCs) has been recognized as an effective therapy for attenuating acute lung injury (ALI). This study aims to discover microRNA (miRNA)-mediated improvement of BMSCs-based therapeutic effects. METHODS AND RESULTS: Mice were treated with lipopolysaccharide (LPS) for induction of ALI. BMSCs with lentivirus- mediated expression of miR-23b-3p or fibroblast growth factor 2 (FGF2) were intratracheally injected into the mice with ALI. The expressions of miR-23b-3p, FGF2, Occludin, and surfactant protein C (SPC) in lung tissues were analyzed by immunoblot or quantitative reverse transcription polymerase chain reaction. Histopathological changes in lung tissues were observed via hematoxylin-eosin staining. Lung edema was assessed by the ratio of lung wet weight/body weight (LWW/BW). The levels of interleukin (IL)-1ß, IL-6, IL-4, and IL-8 in bronchoalveolar lavage fluid (BALF) were assessed by ELISA. LPS injection downregulated the expressions of miR-23b-3p, SPC and Occludin in the lung tissues, increased the LWW/BW ratio and aggravated histopathological abnormalities, while upregulating IL-1ß, IL-6, IL-4, and IL-8 in the BALF. Upregulated miR-23b-3p counteracted LPS-induced effects, whereas downregulated miR-23b-3p intensified LPS-induced effects. FGF2, which was downregulated by miR-23b-3p upregulation, was a target gene of miR-23b-3p. Overexpressing FGF2 downregulated the expressions of miR-23b-3p, SPC and Occludin, increased the LWW/BW ratio and aggravated histopathological abnormalities, while upregulating IL-1ß, IL-6, IL-4, and IL-8, and it offset miR-23b-3p upregulation-caused effects on the ALI mice. CONCLUSIONS: Overexpression of miR-23b-3p in BMSCs strengthened BMSC-mediated protection against LPS-induced mouse acute lung injury via targeting FGF2.

Synergistic targeting of CHK1 and mTOR in MYC-driven tumors.

Deregulation of v-myc avian myelocytomatosis viral oncogene homolog (MYC) occurs in a broad range of human cancers and often predicts poor prognosis and resistance to therapy. However, directly targeting oncogenic MYC remains unsuccessful, and indirectly inhibiting MYC emerges as a promising approach. Checkpoint kinase 1 (CHK1) is a protein kinase that coordinates the G2/M cell cycle checkpoint and protects cancer cells from excessive replicative stress. Using c-MYC-mediated T-cell acute lymphoblastic leukemia (T-acute lymphoblastic leukemia) and N-MYC-driven neuroblastoma as model systems, we reveal that both c-MYC and N-MYC directly bind to the CHK1 locus and activate its transcription. CHIR-124, a selective CHK1 inhibitor, impairs cell viability and induces remarkable synergistic lethality with mTOR inhibitor rapamycin in MYC-overexpressing cells. Mechanistically, rapamycin inactivates carbamoyl-phosphate synthetase 2, aspartate transcarbamoylase, and dihydroorotase (CAD), the essential enzyme for the first three steps of de novo pyrimidine synthesis, and deteriorates CHIR-124-induced replicative stress. We further demonstrate that dual treatments impede T-acute lymphoblastic leukemia and neuroblastoma progression in vivo. These results suggest simultaneous targeting of CHK1 and mTOR as a novel and powerful co-treatment modality for MYC-mediated tumors.

Effect of infrahepatic inferior vena cava partial clamping on central venous pressure and intraoperative blood loss during laparoscopic hepatectomy.

BACKGROUND: Infrahepatic inferior vena cava (IVC) clamping is considered to be an effective method to reduce central venous pressure (CVP) and intraoperative bleeding in liver resection. However, its efficacy and safety during laparoscopic hepatectomy (LH) remain unclear. We perform this retrospective study to evaluate its efficacy and safety during LH. METHODS: Consecutive patients scheduled for LH from September 2014 to August 2019 were retrospectively reviewed. The intraoperative parameters and postoperative outcomes were analyzed. RESULTS: All patients in the infrahepatic IVC clamping group were able to tolerate partial clamping of IVC. The CVP was significantly decreased after infrahepatic IVC clamping without hemodynamic instability (8.7 ± 1.4 cmH2O vs. 2.1 ± 1.3 cmH2O, P = 0.000). Infrahepatic IVC clamping did not significantly reduce total blood loss (287.3 ± 112.5 mL vs. 301.4 ± 127.6 mL, P = 0.133) and blood loss during parenchymal transection (273.2 ± 107.9 mL vs. 296.5 ± 118.1 mL, P = 0.618) compared with the non-clamping group. In subgroup analysis, total blood loss and blood loss during parenchymal transection were significantly reduced in patients with moderate to severe cirrhosis in the clamping group (363.6 ± 71.2 mL vs. 473.4 ± 95.6 mL, P = 0.021), (358.7 ± 70.9 mL vs. 466.9 ± 94.5 mL, P = 0.016), respectively. The complications and hospital stay were comparable. CONCLUSIONS: In conclusion, these data suggest that infrahepatic IVC clamping may be safe and effective.

The reasonable drainage option after laparoscopic common bile duct exploration for the treatment of choledocholithiasis.

OBJECTIVE: To obtain a reasonable drainage after laparoscopic common bile duct exploration (LCBDE) for the treatment of choledocholithiasis. METHODS: Data of 350 consecutive patients who underwent LCBDE in our hospital from January 2014 to December 2016 were retrospectively reviewed. All the patients were divided into three groups according to different drainage types after LCBDE, including T-tube group with 116 cases, primary closure (PC) group with 114 cases and stent insertion group with 120 cases. Operative parameters and outcomes were compared. RESULTS: The operative time was no significant difference between the T-tube group (106.71 ± 5.19 min), PC group (105.46 ± 5.77 min) and stent insertion group (106.88 ± 5.91 min) (F = 2.175, P = 0.115). The postoperative hospital stay was significantly shorter in the stent insertion group (5.62 ± 0.70 d) than in the T-tube group (7.79 ± 0.85 d) and PC group (7.60 ± 0.80 d) (F = 279.649, P = 0.000). The hospitalization cost was significantly less in the stent insertion group (19,432.78 ± 661.74 yuan) than in the T-tube group (22,059.90 ± 697.98 yuan) and PC group (21,927.20 ± 772.02 yuan) (F = 512.492, P = 0.000). The incidence of postoperative biliary-specific complications was 2.59% (3/116 cases) in the T-tube group, 2.63% (3/114 cases) in the PC group, and 0% (0/120 cases) in the stent insertion group, but this difference was not statistically significant (χ2 = 3.177, P = 0.204). The return to normal levels of postoperative liver function tests (LFTs) was significantly faster in the stent insertion group and T-tube group than in the PC group (P < 0.05). The number of 314 patients were followed up for a median time of 20 months (range from 1-48 months), and no biliary stricture, cholangitis or stone recurrence occurred in these patients during that time. CONCLUSIONS: Stent insertion shows better results when compared with T-tube drainage and primary duct closure in terms of postoperative hospital stay and hospitalization cost. It is the prior option for the choledochotomy closure after LCBDE in suitable patients.

Aberrant expression of deubiquitylating enzyme USP9X predicts poor prognosis in gastric cancer.

BACKGROUND: Ubiquitin-specific peptidase 9, X-linked (USP9X), a member of deubiquitylating enzymes family, has recently been reported to be associated with a variety of cancer progression. While it functions as either oncogene or tumor suppressor in a context-dependent manner, the expression and role of USP9X in gastric cancer is largely unknown. METHODS: Sixty-eight cases of patients with gastric cancer were enrolled in this study. The expression of USP9X and MCL1 were detected by immunohistochemistry. USP9X expression was further analyzed by Western blot. Furthermore, we analyzed the correlation between USP9X and MCL1 expression, as well as USP9X expression and clinicopathologic parameters of gastric cancer. Finally, the significance of USP9X expression in gastric cancer was analyzed by both Kaplan-Meier and Cox regression analysis. RESULTS: USP9X expression significantly increased in gastric cancer tissues compared to matched normal tissues. Moreover, expression of USP9X was positive correlated with MCL1 expression (P=0.006) and significant associated with lymph node metastasis (P=0.016), distant metastasis (P=0.001) and tumor staging (P=0.013) in gastric cancer. Importantly, the increasing expression of USP9X in gastric cancer reduces overall survival rate and was an independent factor predicts poor prognosis in patients with gastric cancer. CONCLUSIONS: In this study, deubiquitylating enzyme USP9X was overexpressed in gastric cancer, suggesting a potential implication as an oncogene, and was significantly associated with a poorer survival.

Enhanced piezoelectric effect at the edges of stepped molybdenum disulfide nanosheets.

The development of piezoelectric layered materials may be one of the key elements enabling expansion of nanotechnology, as they offer a solution for the construction of efficient transducers for a wide range of applications, including self-powered devices. Here, we investigate the piezoelectric effect in multilayer (ML) stepped MoS2 flakes obtained by liquid-phase exfoliation, which is especially interesting because it may allow the scalable fabrication of electronic devices using large area deposition techniques (e.g. solution casting, spray coating, inkjet printing). By using a conductive atomic force microscope we map the piezoelectricity of the MoS2 flakes at the nanoscale. Our experiments demonstrate the presence of electrical current densities above 100 A cm-2 when the flakes are strained in the absence of bias, and the current increases proportional to the bias. Simultaneously collected topographic and current maps demonstrate that the edges of stepped ML MoS2 flakes promote the piezoelectric effect, where the largest currents are observed. Density functional theory calculations are consistent with the ring-like piezoelectric potential generated when the flakes are strained, as well as the enhanced piezoelectric effect at edges. Our results pave the way to the design of piezoelectric devices using layered materials.

Cellular uptake of poly(allylamine hydrochloride) microcapsules with different deformability and its influence on cell functions.

It is important to understand the safety issue and cell interaction pattern of polyelectrolyte microcapsules with different deformability before their use in biomedical applications. In this study, SiO2, poly(sodium-p-styrenesulfonate) (PSS) doped CaCO3 and porous CaCO3 spheres, all about 4µm in diameter, were used as templates to prepare microcapsules with different inner structure and subsequent deformability. As a result, three kinds of covalently assembled poly(allylaminehydrochloride)/glutaraldehyde (PAH/GA) microcapsules with similar size but different deformability under external osmotic pressure were prepared. The impact of different microcapsules on cell viability and functions are studied using smooth muscle cells (SMCs), endothelial cells (ECs) and HepG2 cells. The results demonstrated that viabilities of SMCs, ECs and HepG2 cells were not significantly influenced by either of the three kinds of microcapsules. However, the adhesion ability of SMCs and ECs as well as the mobility of SMCs, ECs and HepG2 cells were significantly impaired after treatment with microcapsules in a deformability dependent manner, especially the microcapsules with lower deformability caused higher impairment on cell functions. The cellular uptake kinetics, uptake pathways, intracellular distribution of microcapsules are further investigated in SMCs to reveal the potential mechanism. The SMCs showed faster uptake rate and exocytosis rate of microcapsules with lower deformability (Cap@CaCO3/PSS and Cap@CaCO3), leading to higher intracellular accumulation of microcapsules with lower deformability and possibly larger retardation of cell functions. The results pointed out that the deformability of microcapsules is an important factor governing the biological performance of microcapsules, which requires careful adjustment for further biomedical applications.

Mechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking.

In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical properties and morphologies of pre-crosslinked and non-crosslinked CTBN/epoxy blends were investigated. The results show that the tensile strength, elongation at break and impact strength of pre-crosslinked CTBN/epoxy blends are significantly higher than those of non-crosslinked CTBN/epoxy blends, which is primarily due to the enhanced interfacial strength caused by the chemical bond between the two phases and the localized interpenetrating network structure. Both pre-crosslinked and non-crosslinked CTBN/epoxy blends show a bimodal distribution of micron- and nano-sized rubber particles. However, pre-crosslinked CTBN/epoxy blends have smaller micron-sized rubber particles and larger nano-sized rubber particles than non-crosslinked CTBN/epoxy blends. The dynamic mechanical analysis shows that the storage modulus of pre-crosslinked CTBN/epoxy blends is higher than that of non-crosslinked CTBN/epoxy blends. The glass transition temperature of the CTBN phase in pre-crosslinked CTBN/epoxy blends increases slightly compared with the CTBN/epoxy system. The pre-crosslinking of rubber is a promising method for compatibilization and controlling the morphology of rubber-modified epoxy materials.

Note: Fabrication of a fast-response and user-friendly environmental chamber for atomic force microscopes.

The atomic force microscope is one of the most widespread tools in science, but many suppliers do not provide a competitive solution to make experiments in controlled atmospheres. Here, we provide a solution to this problem by fabricating a fast-response and user-friendly environmental chamber. We corroborate the correct functioning of the chamber by studying the formation of local anodic oxidation on a silicon sample (biased under opposite polarities), an effect that can be suppressed by measuring in a dry nitrogen atmosphere. The usefulness of this chamber goes beyond the example here presented, and it could be used in many other fields of science, including physics, mechanics, microelectronics, nanotechnology, medicine, and biology.

Nanoparticle/Polymer assembled microcapsules with pH sensing property.

The dual-labeled microcapsules via nanoparticle/polymer assembly based on polyamine-salt aggregates can be fabricated for the ratiometric intracellular pH sensing. After deposition of SiO2 nanoparticles on the poly(allylamine hydrochloride)/multivalent anionic salt aggregates followed by silicic acid treatment, the generated microcapsules are stable in a wide pH range (3.0 ∼ 8.0). pH sensitive dye and pH insensitive dye are simultaneously labeled on the capsules, which enable the ratiometric pH sensing. Due to the rough and positively charged surface, the microcapsules can be internalized by several kinds of cells naturally. Real-time measurement of intracellular pH in several living cells shows that the capsules are all located in acidic organelles after being taken up. Furthermore, the negatively charged DNA and dyes can be easily encapsulated into the capsules via charge interaction. The microcapsules with combination of localized pH sensing and drug loading abilities have many advantages, such as following the real-time transportation and processing of the carriers in cells.

Fabrication of triple-labeled polyelectrolyte microcapsules for localized ratiometric pH sensing.

Encapsulation of pH sensitive fluorophores as reporting molecules provides a powerful approach to visualize the transportation of multilayer capsules. In this study, two pH sensitive dyes (fluorescein and oregon green) and one pH insensitive dye (rhodamine B) were simultaneously labeled on the microcapsules to fabricate ratiometric pH sensors. The fluorescence of the triple-labeled microcapsule sensors was robust and nearly independent of other intracellular species. With a dynamic pH measurement range of 3.3-6.5, the microcapsules can report their localized pH at a real time. Cell culture experiments showed that the microcapsules could be internalized by RAW 246.7 cells naturally and finally accumulated in acidic organelles with a pH value of 5.08 ± 0.59 (mean ± s.d.; n=162).

Association between IL6 -174G/C and cancer: A meta-analysis of 105,482 individuals.

Interleukin-6 (IL6) is a pleiotropic inflammatory cytokine, which is implicated in the development and progression of several types of cancer. The -174G/C polymorphism of the IL6 gene controls serum levels of IL6 and may be associated with cancer risk, but the results from the published studies on the association between this polymorphism and cancer risk are conflicting. A comprehensive meta-analysis was conducted to assess the association of IL6 -174G/C with cancer risk. Studies were identified by searches of MEDLINE and HuGE Published Literature databases, with no restrictions. An eligible 83 articles involving 44,735 cancer patients and 60,747 controls were included. Combined odds ratios (ORs) and 95% confidence intervals (CIs) were used to assess the strength of the association between the IL6 -174 G/C polymorphism and cancer risk. Potential sources of heterogeneity were explored by meta-regression and sensitivity analysis. Overall, the IL6 -174G/C polymorphism was not significantly associated with cancer risk. However, cancer risk was increased for individuals with the CC genotype compared to those carrying the GG genotype in African populations (OR=1.83, 95% CI 1.26-2.67, P=0.002), but not in Caucasian populations (OR=1.00, 95% CI 0.92-1.08, P=0.938). The present meta-analysis provides the first evidence of the ethnic-specific association of the IL6 -174G/C polymorphism with cancer risk. Further investigations with a large number of cases and controls are required to confirm the associations between this polymorphism and cancer in Africans.

Preparation and structure evolution of bowknot-like calcium carbonate particles in the presence of poly(sodium 4-styrene sulfate).

Calcium carbonate particles with a novel bowknot-like superstructure were fabricated in the presence of poly(sodium 4-styrene sulfate) (PSS) and under the assistance of ultrasonication during the initial reaction stage. X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction (SAED), and field-emission scanning electron microscopy (FE-SEM) equipped with energy-dispersive X-ray (EDX) were used to characterize the particles. Results demonstrated that the bowknot-like calcium carbonate particles were mainly composed of amorphous calcium carbonate (ACC) and some amounts of calcite and vaterite. Ultrasound irradiation associated with the presence of PSS affects the mesoscale crystallization, resulting in stepwise growth of the earlier bundles to the bowknot. Morphology evolution and dissolution of the bowknot particle were observed in different media, confirming that PSS and Ca(2+) ions in the solutions could accelerate and resist the transformation process, respectively. In the presence of PSS, ACC prefers to transform into vaterite.