RESUMEN
Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) has proven to be an efficient technique for the separation and detection of charged inorganic, organic, and biochemical analytes. It offers several advantages, including cost-effectiveness, nanoliter injection volume, short analysis time, good separation efficiency, suitability for miniaturization, and portability. However, the routine determination of common inorganic cations (NH4+, K+, Na+, Ca2+, Mg2+, and Li+) and inorganic anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, and SO42-) in water quality monitoring typically exhibits limits of detection of about 0.3-1 µM without preconcentration. This sensitivity often proves insufficient for the applications of CE-C4D in trace analysis situations. Here, we explore methods to push the detection limits of CE-C4D through a comprehensive consideration of signal and noise sources. In particular, we (i) studied the model of C4D and its guiding roles in C4D and CE-C4D, (ii) optimized the bandwidth and noise performance of the current-to-voltage (I-V) converter, and (iii) reduced the noise level due to the strong background signal of the background electrolyte by adaptive differential detection. We characterized the system with Li+; the 3-fold signal-to-noise (S/N) detection limit for Li+ was determined at 20 nM, with a linear range spanning from 60 nM to 1.6 mM. Moreover, the optimized CE-C4D method was applied to the analysis of common mixed inorganic cations (K+, Na+, Ca2+, Mg2+, and Li+), anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, and SO42-), toxic halides (BrO3-) and heavy metal ions (Pb2+, Cd2+, Cr3+, Co2+, Ni2+, Zn2+, and Cu2+) at trace concentrations of 200 nM. All electropherograms showed good S/N ratios, thus proving its applicability and accuracy. Our results have shown that the developed CE-C4D method is feasible for trace ion analysis in water quality control.
RESUMEN
Correction for 'A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D)' by Lin Li et al., Analyst, 2024, https://doi.org/10.1039/d4an00354c.
RESUMEN
Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) has the advantages of high throughput (simultaneous detection of multiple ions), high separation efficiency (higher than 105 theoretical plates) and rapid analysis capability (less than 5 min for common inorganic ions). A compact CE-C4D system is ideal for water quality control and on-site analysis. It is suitable not only for common cations (e.g. Na+, K+, Li+, NH4+, Ca2+, etc.) and anions (e.g. Cl-, SO42-, BrO3-, etc.) but also for some ions (e.g. lanthanide ions, Pb2+, Cd2+, etc.) that require complex derivatization procedures to be detected by ion chromatography (IC). However, an obvious limitation of the CE-C4D method is that its sensitivity (e.g. 0.3-1 µM for common inorganic ions) is often insufficient for trace analysis (e.g. 1 ppb or 20 nM level for common inorganic ions) without preconcentration. For this technology to become a powerful and routine analytical technique, the system should be made compact while maintaining trace analysis sensitivity. In this study, we developed an all-in-one version of the CE-C4D instrument with custom-made modular components to make it a convenient, compact and high-performance system. The system was designed using direct digital synthesis (DDS) technology to generate programmable sinusoidal waveforms with any frequency for excitation, a kilovolt high-voltage power supply for capillary electrophoresis separation, and an "effective" differential C4D cell with a low-noise circuitry for high-sensitivity detection. We characterized the system with different concentrations of Cs+, and even a low concentration of 20 nM was detectable without preconcentration. Moreover, the optimized CE-C4D setup was applied to analyse mixed ions at a trace concentration of 200 nM with excellent signal-to-noise ratios. In typical applications, the limits of detection based on the 3σ criterion (without baseline filtering) were 9, 10, 24, 5, and 12 nM for K+, Cs+, Li+, Ca2+, and Mg2+, respectively, and about 7, 6, 6 and 6 nM for Br-, ClO4-, BrO3- and SO42-, respectively. Finally, the setup was also applied for the analysis of all 14 lanthanide ions and rare-earth minerals, and it showed an improvement in sensitivity by more than 25 times.
RESUMEN
Intelligent control of wastewater treatment plants (WWTPs) has the potential to reduce energy consumption and greenhouse gas emissions significantly. Machine learning (ML) provides a promising solution to handle the increasing amount and complexity of generated data. However, relationships between the features of wastewater datasets are generally inconspicuous, which hinders the application of artificial intelligence (AI) in WWTPs intelligent control. In this study, we develop an automatic framework of feature engineering based on variation sliding layer (VSL) to control the air demand precisely. Results demonstrated that using VSL in classic machine learning, deep learning, and ensemble learning could significantly improve the efficiency of aeration intelligent control in WWTPs. Bayesian regression and ensemble learning achieved the highest accuracy for predicting air demand. The developed models with VSL-ML models were also successfully implemented under the full-scale wastewater treatment plant, showing a 16.12 % reduction in demand compared to conventional aeration control of preset dissolved oxygen (DO) and feedback to the blower. The VSL-ML models showed great potential to be applied for the precision air demand prediction and control. The package as a tripartite library of Python is called wwtpai, which is freely accessible on GitHub and CSDN to remove technical barriers to the application of AI technology in WWTPs.
Asunto(s)
Eliminación de Residuos Líquidos , Purificación del Agua , Eliminación de Residuos Líquidos/métodos , Inteligencia Artificial , Teorema de Bayes , Aprendizaje Automático , Purificación del Agua/métodosRESUMEN
Pollen grains can be dispersed singly or variously aggregated in groups. Whether the evolution of pollen aggregation is driven by the pollinator remains unexplored. We hypothesize that an extensive pollen aggregation is favored under a scarcity of pollinators. Variation in pollen aggregation by viscin threads in 13 Rhododendron species was measured as it is related to pollen removal in a visit. Visitation rates of functional pollinator groups that vary in their grooming behavior were investigated in each species. Pollen deposited on stigmas in the field was also sampled. Seven Rhododendron species were infrequently pollinated by low-intensity grooming animals, including birds, butterflies and moths. The other six species were more frequently pollinated by bees with a high intensity of pollen grooming. Bird- and Lepidoptera-pollinated species produced longer pollen-connecting threads that connected more pollen grains. Phylogenetically independent contrast analysis of the 13 species showed that pollinator visitation frequency was negatively related to amounts of pollen removal per visit but not to stigmatic pollen loads. The finding of interspecific patterns in pollen removal related to pollinator visitation frequency suggests pollinator-mediated selection on pollen packaging strategies, supporting the hypothesis of floral evolution via pollen export.
Asunto(s)
Abejas/fisiología , Mariposas Diurnas/fisiología , Mariposas Nocturnas/fisiología , Rhododendron/fisiología , Animales , Flores/fisiología , Polen/fisiología , Polinización , ReproducciónRESUMEN
When insect activity is limited at low temperature, birds may be comparatively more important pollinators than insects for flowering plants. It has been thought that many large-flowered Rhododendron species are pollinated by local birds in the Himalayan regions because most of these species flower in spring at high elevation with cool atmospheric temperature. However, experimental evidence for the role of bird pollination in this hyperdiverse genus remains scarce. To examine the role of birds and insects in pollination, we observed floral visitors to 15 Rhododendron species with different floral sizes and abundant flowering individuals in the eastern Himalayas, Southwest China. To examine the role of birds and insects in female reproductive success in each species, cages were used to exclude birds but not insects from visiting flowers and net bags were used to exclude all floral visitors. Inflorescences where visitation was excluded did not produce fruits in any of the Rhododendron species, indicating that sexual reproduction in these species depended on pollinator visitation. Bird visits were generally less frequent than bee visits in the studied species. However, in the nine species on which bird visitors were observed, fruit and/or seed set were greatly reduced in inflorescences caged to exclude birds but not bees, compared to open-pollinated inflorescences. In the other six species on which bird visitation was not observed, fruit and seed set did not differ significantly between caged and open inflorescences except in one species (R. wardii). Manipulations to achieve selective exclusion of visitors demonstrated that birds could be effective pollinators for 10 out of 15 studied Rhododendron species in the eastern Himalayas. Floral characteristics of these Rhododendron species and weather conditions might favour the evolution of bird pollination systems in the East Himalayas.
RESUMEN
UNLABELLED: ⢠PREMISE OF THE STUDY: Microsatellite primers were developed for the pseudometallophyte Commelina communis (Commelinaceae), an important pioneer plant for phytoremediation of copper-contaminated soil. Two wild populations collected from metalliferous and nonmetalliferous sites were used to assess the polymorphism at each locus. ⢠METHODS AND RESULTS: Based on the Fast Isolation by AFLP of Sequences COntaining repeats (FIASCO) method, a total of 34 pairs of simple sequence repeat (SSR) markers were designed. When 40 specimens from two populations were screened, 12 microsatellite loci were found to be highly polymorphic. The number of alleles per locus ranged from one to 11 and the observed and expected heterozygosity per locus ranged from 0.000 to 1.000 and from 0.195 to 0.941, respectively. ⢠CONCLUSIONS: These markers will be useful for examining genetic diversity, population structure, and gene flow in populations of C. communis under different edaphic conditions and guiding sustainable management plans for phytoremediation.