RESUMEN
In the original publication [...].
RESUMEN
Silicon carbide, a third-generation semiconductor material, is widely used in the creation of high-power devices. In this article, we systematically study the influence of three crucial parameters on the polishing rate of a silicon carbide surface using orthogonal experiments. By optimizing the parameters of chemical mechanical polishing (CMP) through experiments, we determined that the material removal rate (MRR) is 1.2 µm/h and the surface roughness (Ra) is 0.093 nm. Analysis of the relevant polishing mechanism revealed that manganese dioxide formed during the polishing process. Finally, due to the electrostatic effect of the two, MnO2 adsorbed on the Al2O3, which explains the polishing mechanism of Al2O3 in the slurry.
RESUMEN
An artificial nociceptor, as a critical and special bionic receptor, plays a key role in a bioelectronic device that detects stimuli and provides warnings. However, fully exploiting bioelectronic applications remains a major challenge due to the lack of the methods of implementing basic nociceptor functions and nociceptive blockade in a single device. In this work, we developed a Pt/LiSiOx/TiN artificial nociceptor. It had excellent stability under the 104 endurance test with pulse stimuli and exhibited a significant threshold current of 1 mA with 1 V pulse stimuli. Other functions such as relaxation, inadaptation, and sensitization were all realized in a single device. Also, the pain blockade function was first achieved in this nociceptor with over a 25% blocking degree, suggesting a self-protection function. More importantly, an obvious depression was activated by a stimulus over 1.6 V due to the cooperative effects of both lithium ions and oxygen ions in LiSiOx and the dramatic accumulation of Joule heat. The conducting channel ruptured partially under sequential potentiation, thus achieving nociceptive blockade, besides basic functions in one single nociceptor, which was rarely reported. These results provided important guidelines for constructing high-performance memristor-based artificial nociceptors and opened up an alternative approach to the realization of bioelectronic systems for artificial intelligence.
Asunto(s)
Inteligencia Artificial , Nociceptores , Humanos , Nociceptores/fisiología , Dolor , Biónica , Iones/farmacologíaRESUMEN
The pressing need for data storage in the era of big data has driven the development of new storage technologies. As a prominent contender for next-generation memory, phase-change memory can effectively increase storage density through multilevel cell operation and can be applied to neuromorphic and in-memory computing. Herein, the structure and properties of Ta-doped MnTe thin films and their inherent correlations are systematically investigated. Amorphous MnTe thin films sequentially precipitated cubic MnTe2 and hexagonal Te phases with increasing temperature, causing resistance changes. Ta doping inhibited phase segregation in the films and improved their thermal stability in the amorphous state. A phase-change memory cell based on a Ta2.8%-MnTe thin film exhibited three stable resistive states with low resistive drift coefficients. The study findings reveal the possibility of regulating the two-step phase-change process in Ta-MnTe thin films, providing insight into the design of multilevel phase-change memory.
RESUMEN
Benefiting from the brain-inspired event-driven feature and asynchronous sparse coding approach, spiking neural networks (SNNs) are becoming a potentially energy-efficient replacement for conventional artificial neural networks. However, neuromorphic devices used to construct SNNs persistently result in considerable energy consumption owing to the absence of sufficient biological parallels. Drawing inspiration from the transport nature of Na+ and K+ in synapses, here, a Li-based memristor (LixAlOy) was proposed to emulate the biological synapse, leveraging the similarity of Li as a homologous main group element to Na and K. The Li-based memristor exhibits â¼8 ns ultrafast operating speed, 1.91 and 0.72 linearity conductance modulation, and reproducible switching behavior, enabled by lithium vacancies forming a conductive filament mechanism. Moreover, these memristors are capable of simulating fundamental behaviors of a biological synapse, including long-term potentiation and long-term depression behaviors. Most importantly, a threshold-tunable leaky integrate-and-fire (TT-LIF) neuron is built using LixAlOy memristors, successfully integrating synaptic signals from both temporal and spatial levels and achieving an optimal threshold of SNNs. A computationally efficient TT-LIF-based SNN algorithm is also implemented for image recognition schemes, featuring a high recognition rate of 90.1% and an ultralow firing rate of 0.335%, which is 4 times lower than those of other memristor-based SNNs. Our studies reveal the ion dynamics mechanism of the LixAlOy memristor and confirm its potential in rapid switching and the construction of SNNs.
Asunto(s)
Litio , Redes Neurales de la Computación , Algoritmos , Encéfalo , Iones , NeuronasRESUMEN
Three-dimensional phase change memory (3D PCM), possessing fast-speed, high-density and nonvolatility, has been successfully commercialized as storage class memory. A complete PCM device is composed of a memory cell and an associated ovonic threshold switch (OTS) device, which effectively resolves the leakage current issue in the crossbar array. The OTS materials are chalcogenide glasses consisting of chalcogens such as Te, Se and S as central elements, represented by GeTe6, GeSe and GeS. Among them, GeSe-based OTS materials are widely utilized in commercial 3D PCM, their scalability, however, has not been thoroughly investigated. Here, we explore the miniaturization of GeSe OTS selector, including functional layer thickness scalability and device size scalability. The threshold switching voltage of the GeSe OTS device almost lineally decreases with the thinning of the thickness, whereas it hardly changes with the device size. This indicates that the threshold switching behavior is triggered by the electric field, and the threshold switching field of the GeSe OTS selector is approximately 105 V/µm, regardless of the change in film thickness or device size. Systematically analyzing the threshold switching field of Ge-S and Ge-Te OTSs, we find that the threshold switching field of the OTS device is larger than 75 V/µm, significantly higher than PCM devices (8.1-56 V/µm), such as traditional Ge2Sb2Te5, Ag-In-Sb-Te, etc. Moreover, the required electric field is highly correlated with the optical bandgap. Our findings not only serve to optimize GeSe-based OTS device, but also may pave the approach for exploring OTS materials in chalcogenide alloys.
RESUMEN
Interface-influenced crystallization is crucial to understanding the nucleation- and growth-dominated crystallization mechanisms in phase-change materials (PCMs), but little is known. Here, we find that composition vacancy can reduce the interface energy by decreasing the coordinate number (CN) at the interface. Compared to growth-dominated GeTe, nucleation-dominated Ge2Sb2Te5 (GST) exhibits composition vacancies in the (111) interface to saturate or stabilize the Te-terminated plane. Together, the experimental and computational results provide evidence that GST prefers (111) with reduced CN. Furthermore, the (8 - n) bonding rule, rather than CN6, in the nuclei of both GeTe and GST results in lower interface energy, allowing crystallization to be observed at the simulation time in general PCMs. In comparison to GeTe, the reduced CN in the GST nuclei further decreases the interface energy, promoting faster nucleation. Our findings provide an approach to designing ultrafast phase-change memory through vacancy-stabilized interfaces.
RESUMEN
Today's explosion of data urgently requires memory technologies capable of storing large volumes of data in shorter time frames, a feat unattainable with Flash or DRAM. Intel Optane, commonly referred to as three-dimensional phase change memory, stands out as one of the most promising candidates. The Optane with cross-point architecture is constructed through layering a storage element and a selector known as the ovonic threshold switch (OTS). The OTS device, which employs chalcogenide film, has thereby gathered increased attention in recent years. In this paper, we begin by providing a brief introduction to the discovery process of the OTS phenomenon. Subsequently, we summarize the key electrical parameters of OTS devices and delve into recent explorations of OTS materials, which are categorized as Se-based, Te-based, and S-based material systems. Furthermore, we discuss various models for the OTS switching mechanism, including field-induced nucleation model, as well as several carrier injection models. Additionally, we review the progress and innovations in OTS mechanism research. Finally, we highlight the successful application of OTS devices in three-dimensional high-density memory and offer insights into their promising performance and extensive prospects in emerging applications, such as self-selecting memory and neuromorphic computing.
RESUMEN
The disorder-to-order (crystallization) process in phase-change materials determines the speed and storage polymorphism of phase-change memory devices. Only by clarifying the fine-structure variation can the devices be insightfully designed, and encode and store information. As essential phase-change parent materials, the crystallized Sb-Te binary system is generally considered to have the cationic/anionic site occupied by Sb/Te atoms. Here, direct atomic identification and simulation demonstrate that the ultrafast crystallization speed of Sb-Te materials is due to the random nature of lattice site occupation by different classes of atoms with the resulting octahedral motifs having high similarity to the amorphous state. It is further proved that after atomic ordering with disordered chemical occupation, chemical ordering takes place, which results in different storage states with different resistance values. These new insights into the complicated route from disorder to order will play an essential role in designing neuromorphic devices with varying polymorphisms.
RESUMEN
Arsenic is an essential dopant in conventional silicon-based semiconductors and emerging phase-change memory (PCM), yet the detailed functional mechanism is still lacking in the latter. Here, we fabricate chalcogenide-based ovonic threshold switching (OTS) selectors, which are key units for suppressing sneak currents in 3D PCM arrays, with various As concentrations. We discovered that incorporation of As into GeS brings >100 °C increase in crystallization temperature, remarkably improving the switching repeatability and prolonging the device lifetime. These benefits arise from strengthened As-S bonds and sluggish atomic migration after As incorporation, which reduces the leakage current by more than an order of magnitude and significantly suppresses the operational voltage drift, ultimately enabling a back-end-of-line-compatible OTS selector with >12 MA/cm2 on-current, ~10 ns speed, and a lifetime approaching 1010 cycles after 450 °C annealing. These findings allow the precise performance control of GeSAs-based OTS materials for high-density 3D PCM applications.
RESUMEN
Memristor-based neuromorphic computing is expected to overcome the bottleneck of von Neumann architecture. An artificial synaptic device with continuous conductance variation is essential for implementing bioinspired neuromorphic systems. In this work, a memristor based on Pt/LiSiOx/TiN structure is developed to emulate an artificial synapse, which shows non-volatile multilevel resistance state memory behavior. Moreover, the high nonlinearity caused by abrupt changes in the set process is optimized by adjusting the initial resistance. 100 levels of continuously modulated conductance states are achieved and the nonlinearity factors are reduced to 1.31. The significant improvement is attributed to the decrease in the Schottky barrier height and the evolution of the conductive filaments. Finally, due to the improved linearity of the long-term potentiation/long-term depression behaviors in LiSiOxmemristor, a robust recognition rate (â¼94.58%) is achieved for pattern recognition with the modified National Institute of Standards and Technology handwriting database. The Pt/LiSiOx/TiN memristor shows significant potential in high-performance multilevel data storage and neuromorphic computing systems.
RESUMEN
A high-precision current-mode bandgap reference (BGR) circuit with a high-order temperature compensation is presented in this paper. In order to achieve a high-precision BGR circuit, the equation of the nonlinear current has been modified and the high-order term of the current flowing into the nonlinear compensation bipolar junction transistor (NLCBJT) is compensated further. According to the modified equation, two solutions are designed to improve the output accuracy of BGR circuits. The first solution is to divide the NLCBJT branch into two branches to reduce the coefficient of the nonlinear temperature compensation current. The second solution is to inject the nonlinear current into the two branches based on the first one to further eliminate the temperature coefficient (TC) of the current flowing into the NLCBJT. The proposed BGR circuit has been designed using the Semiconductor Manufacturing International Corporation (SMIC) 55 nm CMOS process. The simulation results show that the variations in currents flowing into NLCBJTs improved from 148.41 nA to 69.35 nA and 7.4 nA, respectively, the TC of the output reference current of the proposed circuit is approximately 3.78 ppm/°C at a temperature range of -50 °C to 120 °C with a supply voltage of 3.3 V, the quiescent current consumption of the entire BGR circuit is 42.13 µA, and the size of the BGR layout is 0.044 mm2, leading to the development of a high-precision BGR circuit.
RESUMEN
Video behavior recognition often needs to focus on object motion processes. In this work, a self-organizing computational system oriented toward behavioral clustering recognition is proposed, which achieves the extraction of motion change patterns through binary encoding and completes motion pattern summarization using a similarity comparison algorithm. Furthermore, in the face of unknown behavioral video data, a self-organizing structure with layer-by-layer accuracy progression is used to achieve motion law summarization using a multi-layer agent design approach. Finally, the real-time feasibility is verified in the prototype system using real scenes to provide a new feasible solution for unsupervised behavior recognition and space-time scenes.
Asunto(s)
Algoritmos , Análisis por ConglomeradosRESUMEN
Negative capacitance field effect transistors made of Hf0.5Zr0.5O2 (HZO) are one of the most promising candidates for low-power-density devices because of the extremely steep subthreshold swing and high open-state currents resulting from the addition of ferroelectric materials in the gate dielectric layer. In this paper, HZO thin films were prepared by magnetron sputtering combined with rapid thermal annealing. Their ferroelectric properties were adjusted by changing the annealing temperature and the thickness of HZO. Two-dimensional MoS2 back-gate negative capacitance field-effect transistors (NCFETs) based on HZO were prepared as well. Different annealing temperatures, thicknesses of HZO thin films, and Al2O3 thicknesses were studied to achieve optimal capacitance matching, aiming to reduce both the subthreshold swing of the transistor and the hysteresis of the NCFET. The NCFET exhibits a minimum subthreshold swing as low as 27.9 mV/decade, negligible hysteresis (â¼20 mV), and the ION/IOFF of up to 1.58 × 107. Moreover, a negative drain-induced barrier lowering effect and a negative differential resistance effect have been observed. This steep-slope transistor is compatible with standard CMOS manufacturing processes and attractive for 2D logic and sensor applications as well as future energy-efficient nanoelectronic devices with scaled power supplies.
RESUMEN
The effects of yttrium dopants on the phase change behavior and microstructure of Sn15Sb85films have been systematically investigated. The yttrium-doped Sn15Sb85film has the higher phase transition temperature, ten year data retention ability and crystallization activation energy, which represent a great improvement in thermal stability and data retention. X-ray diffraction, transmission electron microscopy and x-ray photoelectron spectroscopy reveal that the amorphous Sn and Y components restrict the grain growth and decrease the grain size. Raman mode typically associated with Sb is altered when the substance crystallized. Atomic force microscopy results show that the surface morphology of the doped films becomes smoother. T-shaped phase change storage cells based on yttrium-doped Sn15Sb85films exhibit the lower power consumption. The results demonstrate that the crystallization characteristics of Sn15Sb85film can be tuned and optimized through the yttrium dopant for the excellent performances of phase change memory.
RESUMEN
High density phase change memory array requires both minimized critical dimension (CD) and maximized process window for the phase change material layer. High in-wafer uniformity of the nanoscale patterning of chalcogenides material is challenging given the optical proximity effect (OPE) in the lithography process and the micro-loading effect in the etching process. In this study, we demonstrate an approach to fabricate high density phase change material arrays with half-pitch down to around 70 nm by the co-optimization of lithography and plasma etching process. The focused-energy matrix was performed to improve the pattern process window of phase change material on a 12-inch wafer. A variety of patternings from an isolated line to a dense pitch line were investigated using immersion lithography system. The collapse of the edge line is observed due to the OPE induced shrinkage in linewidth, which is deteriorative as the patterning density increases. The sub-resolution assist feature (SRAF) was placed to increase the width of the lines at both edges of each patterning by taking advantage of the optical interference between the main features and the assistant features. The survival of the line at the edges is confirmed with around a 70 nm half-pitch feature in various arrays. A uniform etching profile across the pitch line pattern of phase change material was demonstrated in which the micro-loading effect and the plasma etching damage were significantly suppressed by co-optimizing the etching parameters. The results pave the way to achieve high density device arrays with improved uniformity and reliability for mass storage applications.
RESUMEN
The selector is an indispensable section of the phase change memory (PCM) chip, where it not only suppresses the crosstalk, but also provides high on-current to melt the incorporated phase change material. In fact, the ovonic threshold switching (OTS) selector is utilized in 3D stacking PCM chips by virtue of its high scalability and driving capability. In this paper, the influence of Si concentration on the electrical properties of Si-Te OTS materials is studied; the threshold voltage and leakage current remain basically unchanged with the decrease in electrode diameter. Meanwhile, the on-current density (Jon) increases significantly as the device is scaling down, and 25 MA/cm2 on-current density is achieved in the 60-nm SiTe device. In addition, we also determine the state of the Si-Te OTS layer and preliminarily obtain the approximate band structure, from which we infer that the conduction mechanism conforms to the Poole-Frenkel (PF) model.
RESUMEN
Phase change memory (PCM), a typical representative of new storage technologies, offers significant advantages in terms of capacity and endurance. However, among the research on phase change materials, thermal stability and switching speed performance have always been the direction where breakthroughs are needed. In this research, as a high-speed and good thermal stability material, Ta was proposed to be doped in Sb3Te1 alloy to improve the phase transition performance and electrical properties. The characterization shows that Ta-doped Sb3Te1 can crystallize at temperatures up to 232 °C and devices can operate at speeds of 6 ns and 8 × 104 operation cycles. The reduction of grain size and the density change rate (3.39%) show excellent performances, which are both smaller than that of Ge2Sb2Te5 (GST) and Sb3Te1. These properties conclusively demonstrate that Ta incorporation of Sb3Te1 alloy is a material with better thermal stability and faster crystallization rates for PCM applications.
RESUMEN
As a new generation of non-volatile memory, phase change random access memory (PCRAM) has the potential to fill the hierarchical gap between DRAM and NAND FLASH in computer storage. Sb2Te3, one of the candidate materials for high-speed PCRAM, has high crystallization speed and poor thermal stability. In this work, we investigated the effect of carbon doping on Sb2Te3. It was found that the FCC phase of C-doped Sb2Te3 appeared at 200 °C and began to transform into the HEX phase at 25 °C, which is different from the previous reports where no FCC phase was observed in C-Sb2Te3. Based on the experimental observation and first-principles density functional theory calculation, it is found that the formation energy of FCC-Sb2Te3 structure decreases gradually with the increase in C doping concentration. Moreover, doped C atoms tend to form C molecular clusters in sp2 hybridization at the grain boundary of Sb2Te3, which is similar to the layered structure of graphite. And after doping C atoms, the thermal stability of Sb2Te3 is improved. We have fabricated the PCRAM device cell array of a C-Sb2Te3 alloy, which has an operating speed of 5 ns, a high thermal stability (10-year data retention temperature 138.1 °C), a low device power consumption (0.57 pJ), a continuously adjustable resistance value, and a very low resistance drift coefficient.
RESUMEN
Phase-change memory (PCM) is one of the most promising candidates for next-generation data-storage technology, the programming speed of which has enhanced within a timescale from milliseconds to sub-nanosecond (≈500 ps) through decades of effort. As the potential applications of PCM strongly depend on the switching speed, namely, the time required for the recrystallization of amorphous chalcogenide media, the finding of the ultimate crystallization speed is of great importance both theoretically and practically. In this work, through systematic analysis of discovered phase-change materials and ab initio molecular dynamics simulations, elemental Sb-based PCM is predicted to have a superfast crystallization speed. Indeed, such cells experimentally present extremely fast crystallization speeds within 360 ps. Remarkably, the recrystallization process is further sped up as the device shrinks, and a record-fast crystallization speed of only 242 ps is achieved in 60 nm-size devices. These findings open opportunities for dynamic random-access memory (DRAM)-like and even cache-like PCM using appropriate storage materials.