Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 41
Filtrar
2.
Injury ; 55(7): 111587, 2024 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-38761709

RESUMEN

AIM: to assess the small-scale 3D printing feasibility and cost estimation of a device for controlled dynamization. MATERIALS AND METHOD: The two-part device previously developed by our research group was printed with a carbon fiber-reinforced nylon filament (Gen3 CarbonX™ PA6+CF, 3DXTECH Additive Manufacturing) by a professional 3D printer (FUNMAT HT, Intamsys). Electricity, material, and labor costs for production in a Brazilian city in the Santa Catarina state were calculated. RESULTS: The devices for controlled dynamization were successfully printed in accordance with the planned design and dimensions. Six out of 38 printed devices presented defects in the bolt hole and were discarded. The average printing time per device was 1.9 h. The average electricity, material, and labor costs per printed device were respectively US$0.71, US$13.55, and US$3.04. The total production cost per device reaches approximately US$20 by adding the average cost of defective devices (15 %). CONCLUSION: 3D printing of the controlled dynamization device is feasible and its cost seems affordable to most healthcare services, which could optimize the consolidation of diaphyseal fractures and reduce treatment time for patients.


Asunto(s)
Estudios de Factibilidad , Impresión Tridimensional , Impresión Tridimensional/economía , Humanos , Diseño de Equipo , Fijadores Externos/economía , Fijación de Fractura/instrumentación , Fijación de Fractura/métodos , Fijación de Fractura/economía , Brasil , Fracturas Óseas/cirugía
3.
BMC Musculoskelet Disord ; 25(1): 75, 2024 Jan 18.
Artículo en Inglés | MEDLINE | ID: mdl-38238672

RESUMEN

BACKGROUND: Simple radiography in conjunction with pertinent medical history and a comprehensive physical examination is typically adequate for diagnosing chronic osteomyelitis (CO). However, radiographic manifestations of CO lack specificity; therefore, the concordance among specialists in this regard has not been systematically assessed. This study aimed to compare and evaluate the proficiency of orthopedic surgeons and radiologists in identifying radiographic indicators present in simple radiographs for diagnosing CO. METHODS: This cross-sectional study was a correlational investigation utilizing plain radiographs obtained from a cohort of 60 patients diagnosed with CO. Comprehensive assessments of the demographic and clinical characteristics, comorbidities, and microbiological parameters were conducted. Additional variables included the anatomical location of the CO, existence of fistulas, disease duration, and presence of pseudoarthrosis. This study meticulously documented the presence or absence of six specific findings: bone destruction, which incorporates erosion and radiolucencies around implants; bone sclerosis; cortical thinning concomitant with erosion; cortical thickening; sequestrum formation; and soft-tissue swelling. RESULTS: Most patients were men (75%), with a mean age of 45.1 years. Hematogenous etiology of CO represented 23%. Bone sclerosis (71.3%) and cortical thickening (67.7%) were the most common radiographic findings, followed by soft-tissue swelling (51.3%), sequestration (47.3%), bone destruction (33.3%), and cortical erosion (30.3%). The mean agreement was 74.2%, showing a marked disagreement rate of 25.8% among all radiographic findings. The presence or absence of soft tissue edema, a prominent radiographic finding that was more important than the other findings, showed the greatest disagreement. CONCLUSIONS: Radiographic findings in CO were universally observed in all patients, demonstrating a high degree of concordance among specialists, with the exception of soft tissue swelling.


Asunto(s)
Osteólisis , Osteomielitis , Masculino , Humanos , Persona de Mediana Edad , Femenino , Prevalencia , Estudios Transversales , Esclerosis/complicaciones , Osteomielitis/diagnóstico por imagen , Osteomielitis/epidemiología , Osteomielitis/complicaciones , Radiografía , Infección Persistente
4.
J Pediatr Orthop B ; 33(2): 167-173, 2024 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-37158126

RESUMEN

OBJECTIVES: The primary objective of the present study is to compare the radiographic outcomes and complications of two different techniques for lateral closing-wedge osteotomy in pediatric patients with cubitus varus. METHODS: We retrospectively identified patients treated at five tertiary care institutions: 17 underwent the Kirschner-wire (KW) technique, and 15 patients were treated with the mini external fixator (MEF) technique. Demographic data, previous treatment, pre- and postoperative carrying angle (CA), complications and additional procedures were recorded. Radiographic evaluation included assessment of the humerus-elbow-wrist angle (HEW), and the lateral prominence index (LPI). RESULTS: Patients treated with both KW and MEF achieved significant improvements in clinical alignment (mean pre-op CA -16 ± 6.1 degrees to mean post-op 8.9 ± 5.3 degrees, P < 0.001). There were no differences in final radiographic alignment or radiographic union time; however, time to achieve full elbow motion was faster in the MEF group (13.6 versus 34.3 weeks, P = 0.4547). Two patients (11.8%) in the KW group experienced complications, including one superficial infection and one failed correction that required unplanned revision surgery. Eleven patients in the MEF group underwent a planned second surgical procedure for hardware removal. CONCLUSIONS: Both fixation techniques are effective at correcting cubitus varus in the pediatric population. The MEF technique may have the advantage of shorter recovery of elbow range of motion but may require sedation for hardware removal. The KW technique may present a slightly higher complication rate.


Asunto(s)
Articulación del Codo , Fracturas del Húmero , Deformidades Adquiridas de la Articulación , Humanos , Niño , Fracturas del Húmero/complicaciones , Fracturas del Húmero/diagnóstico por imagen , Fracturas del Húmero/cirugía , Estudios Retrospectivos , Resultado del Tratamiento , Deformidades Adquiridas de la Articulación/diagnóstico por imagen , Deformidades Adquiridas de la Articulación/cirugía , Osteotomía/métodos , Articulación del Codo/diagnóstico por imagen , Articulación del Codo/cirugía , Rango del Movimiento Articular
5.
Injury ; 54 Suppl 6: 110649, 2023 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-38143147

RESUMEN

INTRODUCTION: Bone cement containing vancomycin or gentamicin is a therapeutic strategy for combating orthopedic infections: however, the activity of these antibiotics is narrow. Silver nanoparticles (AgNPs) are nanocomponents with a wide spectrum, including multidrug-resistant bacteria. In the present study, we aimed to evaluate the effect of AgNP-loaded polymethylmethacrylate (PMMA) on biofilm formation by Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus epidermidis. METHODS: The effect of AgNP-loaded PMMA with and without vancomycin or gentamicin on biofilm production was quantitatively analyzed. S. aureus, E. coli, P. aeruginosa, and S. epidermidis were included as biofilm-producing microorganisms in the in vitro model. RESULTS: AgNP-loaded PMMA with antibiotics reduced the number of colony-forming units (CFUs; p<0.001). However, AgNP-loaded PMMA alone did not significantly reduce biofilm formation. CONCLUSION: Our study demonstrated the potential of AgNP-loaded PMMA. Notably, we observed that AgNP-loaded PMMA containing vancomycin or gentamycin exhibited significantly superior efficacy, with satisfactory activity against most biofilm-forming microbial agents examined.


Asunto(s)
Nanopartículas del Metal , Vancomicina , Humanos , Vancomicina/farmacología , Polimetil Metacrilato/farmacología , Gentamicinas/farmacología , Plata/farmacología , Staphylococcus aureus , Escherichia coli , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Cementos para Huesos/farmacología , Biopelículas , Bacterias
6.
Acta Ortop Bras ; 31(spe2): e262167, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37323152

RESUMEN

Distal femoral metaphyseal fractures are rare in children, and the proximity of the fracture to the growth plate makes their approach challenging. Objective: Evaluate outcomes and complications of treatment of distal femoral metaphyseal fractures in children with proximal humeral locking plates. Method: Retrospective study between 2018 and 2021, including seven patients. The analysis included general characteristics, trauma mechanism, classification, clinical and radiographic outcomes, and complications. Results: The mean follow-up was 20 months, the average age was nine years, five patients were boys, and six fractured on the right side. Five fractures were caused by car accidents, one by falling from their own height and one by playing soccer. Five fractures were classified as 33-M/3.2 and two as 33-M/3.1. Three fractures were open, Gustilo IIIA. All seven patients recovered mobility and resumed their pre-trauma activities. All seven healed, and one fracture was reduced to 5 degrees valgus, without any other complications. Six patients had the implant removed and did not present refracture. Conclusion: Treatment of distal femoral metaphyseal fractures with proximal humeral locking plates is a viable option that offers good results and fewer complications, saving the epiphyseal cartilage. Level of Evidence II; Controlled study without randomization.


As fraturas metafisárias distais do fêmur são raras em crianças, a proximidade da fratura com a placa de crescimento torna a sua abordagem desafiadora. Objetivo: Avaliar resultados e complicações do tratamento das fraturas da metáfise distal do fêmur em crianças com placas de úmero proximal. Método: Estudo retrospectivo entre 2018 e 2021 incluindo sete pacientes. A análise incluiu características gerais, mecanismo do trauma, classificação, resultados clínicos, radiográficos e complicações. Resultados: A média do acompanhamento foi de 20 meses, a idade média foi de nove anos, cinco pacientes eram meninos e seis fraturas do lado direito. Cinco fraturas por acidentes automobilísticos, uma por queda da própria altura e uma jogando futebol. Cinco fraturas classificadas como 33-M/3,2 e duas como 33-M/3,1. Três fraturas foram expostas, Gustilo IIIA. Todos os sete pacientes recuperaram a mobilidade e retomaram às atividades anteriores ao trauma. Todas as sete fraturas consolidaram, uma fratura foi reduzida com valgo de 5 graus, e não houveram outras complicações. Seis pacientes tiveram o implante removido e não apresentaram refratura. Conclusão: O tratamento das fraturas da metáfise distal do fêmur com placas de úmero proximal é uma opção viável que oferece bons resultados com poucas complicações, poupando a cartilagem epifisária. Nível de Evidência II; Estudo controlado sem randomização.

7.
Rev Bras Ortop (Sao Paulo) ; 58(2): 303-312, 2023 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-37252303

RESUMEN

Objective To evaluate a proposed three-dimensional (3D) printing process of a biomodel developed with the aid of fused deposition modeling (FDM) technology based on computed tomography (CT) scans of an individual with nonunion of a coronal femoral condyle fracture (Hoffa's fracture). Materials and Methods Thus, we used CT scans, which enable the evaluation of the 3D volumetric reconstruction of the anatomical model, as well as of the architecture and bone geometry of sites with complex anatomy, such as the joints. In addition, it enables the development of the virtual surgical planning (VSP) in a computer-aided design (CAD) software. This technology makes it possible to print full-scale anatomical models that can be used in surgical simulations for training and in the choice of the best placement of the implant according to the VSP. In the radiographic evaluation of the osteosynthesis of the Hoffa's fracture nonunion, we assessed the position of the implant in the 3D-printed anatomical model and in the patient's knee. Results The 3D-printed anatomical model showed geometric and morphological characteristics similar to those of the actual bone. The position of the implants in relation to the nonunion line and anatomical landmarks showed great accuracy in the comparison of the patient's knee with the 3D-printed anatomical model. Conclusion The use of the virtual anatomical model and the 3D-printed anatomical model with the additive manufacturing (AM) technology proved to be effective and useful in planning and performing the surgical treatment of Hoffa's fracture nonunion. Thus, it showed great accuracy in the reproducibility of the virtual surgical planning and the 3D-printed anatomical model.

8.
Rev Paul Pediatr ; 41: e2021298, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37042939

RESUMEN

OBJECTIVE: To evaluate the presence of axial skeletal deviations in children and adolescents and to relate them to body mass index (BMI), age and sex. METHODS: 101 patients aged 7 to 17 years old were included in this study; exclusion criteria were primary orthopedic diseases and syndromes or treatments that affect growth. Patients were grouped according to their BMI Z-score: eutrophic (n=29), overweight (n=18) and obese (n=54). They underwent static clinical inspection was made by simetrographic technique. Intermaleolar distance was obtained, Adam's forward bend and tiptoe tests were performed. RESULTS: When comparing obese and eutrophic patients, changes in the cervical spine (p<0.01), spine (p<0.001), hip (p<0.01) and shoulders (p<0.001) were present in more than half of the obese patients (62.5%, 62.2%, 79.9% and 55.4%, respectively). Changes in the knees were more frequent among obese (p<0.001) when compared to eutrophic patients. There was no variation regarding age or sex (p>0.05). CONCLUSIONS: being overweight influences skeletal deviations in children and adolescents.


Asunto(s)
Obesidad , Sobrepeso , Humanos , Niño , Adolescente , Sobrepeso/epidemiología , Obesidad/epidemiología , Índice de Masa Corporal , Extremidad Inferior
9.
J Multidiscip Healthc ; 16: 875-887, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37038452

RESUMEN

Introduction: 3D object printing technology is a resource increasingly used in medicine in recent years, mainly incorporated in surgical areas like orthopedics. The models made by 3D printing technology provide surgeons with an accurate analysis of complex anatomical structures, allowing the planning, training, and surgery simulation. In orthopedic surgery, this technique is especially applied in oncological surgeries, bone, and joint reconstructions, and orthopedic trauma surgeries. In these cases, it is possible to prototype anatomical models for surgical planning, simulating, and training, besides printing of instruments and implants. Purpose: The purpose of this paper is to describe the acquisition and processing from computed tomography images for 3D printing, to describe modeling and the 3D printing process of the biomodels in real size. This paper highlights 3D printing with the applicability of the 3D biomodels in orthopedic surgeries and shows some examples of surgical planning in orthopedic trauma surgery. Patients and Methods: Four examples were selected to demonstrate the workflow and rationale throughout the process of planning and printing 3D models to be used in a variety of situations in orthopedic trauma surgeries. In all cases, the use of 3D modeling has impacted and improved the final treatment strategy. Conclusion: The use of the virtual anatomical model and the 3D printed anatomical model with the additive manufacturing technology proved to be effective and useful in planning and performing the surgical treatment of complex articular fractures, allowing surgical planning both virtual and with the 3D printed anatomical model, besides being useful during the surgical time as a navigation instrument.

10.
Rev. bras. ortop ; 58(2): 303-312, Mar.-Apr. 2023. tab, graf
Artículo en Inglés | LILACS | ID: biblio-1449806

RESUMEN

Abstract Objective To evaluate a proposed three-dimensional (3D) printing process of a biomodel developed with the aid of fused deposition modeling (FDM) technology based on computed tomography (CT) scans of an individual with nonunion of a coronal femoral condyle fracture (Hoffa's fracture). Materials and Methods Thus, we used CT scans, which enable the evaluation of the 3D volumetric reconstruction of the anatomical model, as well as of the architecture and bone geometry of sites with complex anatomy, such as the joints. In addition, it enables the development of the virtual surgical planning (VSP) in a computer-aided design (CAD) software. This technology makes it possible to print full-scale anatomical models that can be used in surgical simulations for training and in the choice of the best placement of the implant according to the VSP. In the radiographic evaluation of the osteosynthesis of the Hoffa's fracture nonunion, we assessed the position of the implant in the 3D-printed anatomical model and in the patient's knee. Results The 3D-printed anatomical model showed geometric and morphological characteristics similar to those of the actual bone. The position of the implants in relation to the nonunion line and anatomical landmarks showed great accuracy in the comparison of the patient's knee with the 3D-printed anatomical model. Conclusion The use of the virtual anatomical model and the 3D-printed anatomical model with the additive manufacturing (AM) technology proved to be effective and useful in planning and performing the surgical treatment of Hoffa's fracture nonunion. Thus, it showed great accuracy in the reproducibility of the virtual surgical planning and the 3D-printed anatomical model.


Resumo Objetivo Avaliar uma proposta de processo de impressão tridimensional (3D) de um biomodelo preparado com o auxílio da tecnologia de modelagem por deposição de material fundido (fused deposition modeling, FDM, em inglês) a partir de imagens de tomografia computadorizada (TC) de um indivíduo com pseudartrose de fratura coronal do côndilo femoral (fratura de Hoffa). Materiais e Métodos Para tanto, utilizamos imagens de TC, que permitem estudar a reconstrução volumétrica 3D do modelo anatômico, além da arquitetura e geometria óssea de sítios de anatomia complexa, como as articulações. Também permite o planejamento cirúrgico virtual (PCV) em um programa de desenho assistido por computador (computer-aided design, CAD, em inglês). Essa tecnologia possibilita a impressão de modelos anatômicos em escala real que podem ser utilizados em simulações cirúrgicas para o treinamento e a escolha do melhor posicionamento do implante de acordo com o PCV. Na avaliação radiográfica da osteossíntese da pseudartrose de Hoffa, verificou-se a posição do implante no modelo anatômico impresso em 3D e no joelho do paciente. Resultados O modelo anatômico impresso em 3D apresentou características geométricas e morfológicas semelhantes às do osso real. O posicionamento dos implantes em relação à linha de pseudartrose e pontos anatômicos foram bastante precisos na comparação do joelho do paciente com o modelo anatômico impresso em 3D. Conclusão A utilização do modelo anatômico virtual e do modelo anatômico impresso em 3D com a tecnologia de manufatura aditiva (MA) foi eficaz e auxiliou o planejamento e a realização do tratamento cirúrgico da pseudartrose da fratura de Hoffa. Desta forma, foi bastante preciso na reprodutibilidade do planejamento cirúrgico tanto virtual quanto no modelo anatômico impresso em 3D.


Asunto(s)
Humanos , Seudoartrosis , Procedimientos Ortopédicos , Impresión Tridimensional , Fractura de Hoffa/cirugía
11.
Acta Ortop Bras ; 31(1): e252387, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-36844128

RESUMEN

In the current scenario of medical education, a trend of using models and simulators to train operational skills, especially in the practice of basic orthopedic techniques, is growing. This form of teaching allows academics to maximize learning opportunities and contributes to improving the quality of care for their future patients. However, the realistic simulation has high costs as a major limitation. Objective: To develop a low-cost orthopedic simulator for practicing pediatric forearm reduction skills in the preclinical setting. Methods: A model of an arm and forearm with a fracture in the middle third was developed. Orthopedists, residents, and medical students evaluated the simulator's ability to reproduce fracture reduction. Results: The simulator had a significantly lower cost than the others in the literature. The participants agreed that the model had a good performance, and that the manipulation was consistent with the reality of reducing closed pediatric forearm fracture. Conclusion: The results suggest that this model can be used to teach orthopedic residents and medical students the skill of closed reduction of fractures in the middle third of the forearm. Level of Evidence III, Case Control Study.


No cenário atual de ensino médico existe uma tendência crescente do uso de modelos e simuladores para o treino de habilidades operacionais, principalmente na prática de técnicas ortopédicas básicas, que permite aos acadêmicos maximizarem as oportunidades de aprendizado e contribui para melhorar a qualidade de atendimento dos futuros pacientes atendidos. A simulação realística, no entanto, tem como grande limitação os altos custos. Objetivo: Desenvolver um simulador ortopédico de baixo custo para a prática de habilidades de redução incruenta do antebraço pediátrico no cenário pré-clínico. Métodos: Desenvolveu-se um modelo de braço e antebraço com fratura no terço médio, que foi avaliado por médicos ortopedistas, residentes e acadêmicos de medicina quanto à capacidade do simulador de reproduzir a redução da fratura. Resultados: O simulador desenvolvido teve custo significativamente inferior aos existentes na literatura. Os participantes concordaram que o modelo teve um bom desempenho e que a manipulação foi condizente com a realidade de redução de fratura incruenta do antebraço pediátrico. Conclusão: Os resultados levam a crer que esse modelo pode ser usado para ensinar a redução incruenta de fratura no terço médio do antebraço para residentes de ortopedia e acadêmicos de medicina. Nível de Evidência III, Estudo de Caso-Controle.

12.
Curr Opin Pediatr ; 35(1): 110-117, 2023 02 01.
Artículo en Inglés | MEDLINE | ID: mdl-36218192

RESUMEN

PURPOSE OF REVIEW: This study aimed to review the established concepts and advances related to growth modulation for treating knee angular deformities. Although they are considered well tolerated procedures, careful indications and accurate techniques are necessary to ensure good results. RECENT FINDINGS: In addition to general clinical and radiographic evaluations, new tools such as two-dimensional low-dose radiography and gait analysis have been used to clarify angular and torsional combinations and the impact of mild angulations on the knee joint. Temporary epiphysiodesis is commonly the choice, and it can be performed with different implants such as staples, tension band plates (TBP), percutaneous transphyseal screws (PETS), sutures, and screws. SUMMARY: Considering its principles, TBP has been preferred for younger children. Cost can be a limitation, and research for alternative implants such as screws and nonabsorbable sutures indicate they might be an alternative in the future. In adolescents, PETS becomes an attractive alternative; however, its reversible character has been controversial, and further studies are needed to establish limits in younger patients.


Asunto(s)
Artrodesis , Articulación de la Rodilla , Niño , Adolescente , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Articulación de la Rodilla/anomalías , Radiografía , Estudios Retrospectivos
13.
Acta ortop. bras ; 31(spe2): e262167, 2023. tab, graf
Artículo en Inglés | LILACS-Express | LILACS | ID: biblio-1439150

RESUMEN

ABSTRACT Distal femoral metaphyseal fractures are rare in children, and the proximity of the fracture to the growth plate makes their approach challenging. Objective Evaluate outcomes and complications of treatment of distal femoral metaphyseal fractures in children with proximal humeral locking plates. Method Retrospective study between 2018 and 2021, including seven patients. The analysis included general characteristics, trauma mechanism, classification, clinical and radiographic outcomes, and complications. Results The mean follow-up was 20 months, the average age was nine years, five patients were boys, and six fractured on the right side. Five fractures were caused by car accidents, one by falling from their own height and one by playing soccer. Five fractures were classified as 33-M/3.2 and two as 33-M/3.1. Three fractures were open, Gustilo IIIA. All seven patients recovered mobility and resumed their pre-trauma activities. All seven healed, and one fracture was reduced to 5 degrees valgus, without any other complications. Six patients had the implant removed and did not present refracture. Conclusion Treatment of distal femoral metaphyseal fractures with proximal humeral locking plates is a viable option that offers good results and fewer complications, saving the epiphyseal cartilage. Level of Evidence II; Controlled study without randomization.


RESUMO As fraturas metafisárias distais do fêmur são raras em crianças, a proximidade da fratura com a placa de crescimento torna a sua abordagem desafiadora. Objetivo Avaliar resultados e complicações do tratamento das fraturas da metáfise distal do fêmur em crianças com placas de úmero proximal. Método Estudo retrospectivo entre 2018 e 2021 incluindo sete pacientes. A análise incluiu características gerais, mecanismo do trauma, classificação, resultados clínicos, radiográficos e complicações. Resultados A média do acompanhamento foi de 20 meses, a idade média foi de nove anos, cinco pacientes eram meninos e seis fraturas do lado direito. Cinco fraturas por acidentes automobilísticos, uma por queda da própria altura e uma jogando futebol. Cinco fraturas classificadas como 33-M/3,2 e duas como 33-M/3,1. Três fraturas foram expostas, Gustilo IIIA. Todos os sete pacientes recuperaram a mobilidade e retomaram às atividades anteriores ao trauma. Todas as sete fraturas consolidaram, uma fratura foi reduzida com valgo de 5 graus, e não houveram outras complicações. Seis pacientes tiveram o implante removido e não apresentaram refratura. Conclusão O tratamento das fraturas da metáfise distal do fêmur com placas de úmero proximal é uma opção viável que oferece bons resultados com poucas complicações, poupando a cartilagem epifisária. Nível de Evidência II; Estudo controlado sem randomização.

14.
Rev. Paul. Pediatr. (Ed. Port., Online) ; 41: e2021298, 2023. tab, graf
Artículo en Inglés | LILACS-Express | LILACS | ID: biblio-1431375

RESUMEN

Abstract Objective: To evaluate the presence of axial skeletal deviations in children and adolescents and to relate them to body mass index (BMI), age and sex. Methods: 101 patients aged 7 to 17 years old were included in this study; exclusion criteria were primary orthopedic diseases and syndromes or treatments that affect growth. Patients were grouped according to their BMI Z-score: eutrophic (n=29), overweight (n=18) and obese (n=54). They underwent static clinical inspection was made by simetrographic technique. Intermaleolar distance was obtained, Adam's forward bend and tiptoe tests were performed. Results: When comparing obese and eutrophic patients, changes in the cervical spine (p<0.01), spine (p<0.001), hip (p<0.01) and shoulders (p<0.001) were present in more than half of the obese patients (62.5%, 62.2%, 79.9% and 55.4%, respectively). Changes in the knees were more frequent among obese (p<0.001) when compared to eutrophic patients. There was no variation regarding age or sex (p>0.05). Conclusions: being overweight influences skeletal deviations in children and adolescents.


RESUMO Objetivo: Avaliar a presença de desvios do esqueleto axial em crianças e adolescentes e relacioná-los com índice de massa corpórea, idade e sexo. Métodos: Fizeram parte deste estudo 101 pacientes de sete a 17 anos, os quais não possuíam doenças ortopédicas primárias, síndromes ou tratamentos que afetassem o crescimento. Os pacientes foram agrupados conforme os escores Z do índice de massa corpórea em: eutróficos (n=29), com sobrepeso (n=18) e obesos (n=54). Foram avaliados por meio da inspeção clínica estática, com simetrógrafo de parede, medida da distância intermaleolar, manobra de Adams e teste da ponta dos pés. Resultados: Quando comparados os pacientes obesos com os eutróficos, alterações de coluna cervical (p<0,01), coluna (p<0,001), quadril (p<0,01) e ombros (p<0,001) ocorreram em mais da metade dos obesos (62,5, 62,2, 79,9 e 55,4%, respectivamente). Alterações nos joelhos foram mais frequentes entre os obesos (p<0,001) quando comparados aos eutróficos. Não houve variação com a idade ou o sexo (p>0,05). Conclusões: Conclui-se que o excesso de peso exerce influência sobre desvios do esqueleto em crianças e adolescentes.

15.
Acta ortop. bras ; 31(1): e252387, 2023. graf
Artículo en Inglés | LILACS-Express | LILACS | ID: biblio-1419964

RESUMEN

ABSTRACT In the current scenario of medical education, a trend of using models and simulators to train operational skills, especially in the practice of basic orthopedic techniques, is growing. This form of teaching allows academics to maximize learning opportunities and contributes to improving the quality of care for their future patients. However, the realistic simulation has high costs as a major limitation. Objective: To develop a low-cost orthopedic simulator for practicing pediatric forearm reduction skills in the preclinical setting. Methods: A model of an arm and forearm with a fracture in the middle third was developed. Orthopedists, residents, and medical students evaluated the simulator's ability to reproduce fracture reduction. Results: The simulator had a significantly lower cost than the others in the literature. The participants agreed that the model had a good performance, and that the manipulation was consistent with the reality of reducing closed pediatric forearm fracture. Conclusion: The results suggest that this model can be used to teach orthopedic residents and medical students the skill of closed reduction of fractures in the middle third of the forearm. Level of Evidence III, Case Control Study.


RESUMO No cenário atual de ensino médico existe uma tendência crescente do uso de modelos e simuladores para o treino de habilidades operacionais, principalmente na prática de técnicas ortopédicas básicas, que permite aos acadêmicos maximizarem as oportunidades de aprendizado e contribui para melhorar a qualidade de atendimento dos futuros pacientes atendidos. A simulação realística, no entanto, tem como grande limitação os altos custos. Objetivo: Desenvolver um simulador ortopédico de baixo custo para a prática de habilidades de redução incruenta do antebraço pediátrico no cenário pré-clínico. Métodos: Desenvolveu-se um modelo de braço e antebraço com fratura no terço médio, que foi avaliado por médicos ortopedistas, residentes e acadêmicos de medicina quanto à capacidade do simulador de reproduzir a redução da fratura. Resultados: O simulador desenvolvido teve custo significativamente inferior aos existentes na literatura. Os participantes concordaram que o modelo teve um bom desempenho e que a manipulação foi condizente com a realidade de redução de fratura incruenta do antebraço pediátrico. Conclusão: Os resultados levam a crer que esse modelo pode ser usado para ensinar a redução incruenta de fratura no terço médio do antebraço para residentes de ortopedia e acadêmicos de medicina. Nível de Evidência III, Estudo de Caso-Controle.

16.
Rev Bras Ortop (Sao Paulo) ; 57(5): 807-814, 2022 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-36226215

RESUMEN

Objective The present study analyzed the incidence of epiphyseal avascular necrosis in patients with slipped capital femoral epiphysis (SCFE) treated using a modified Dunn technique. In addition, this study determined the correlation of other variables with this incidence and described treatment complications. Methods This is a retrospective study with 20 patients treated by the same surgical team from 2009 to 2019 and followed up for 2 to 12 years. The analysis included general features, time from presentation to surgical procedure, classification, and intraoperative blood perfusion of the epiphysis, as well as complications and their treatment. Results All cases were severe; 65% were acute on chronic, and 55% of the SCFEs were unstable. Our complication rate was 45%, with 5 cases of avascular necrosis, 2 cases of deep infection, 1 case of material failure, and 1 case of joint instability. The statistical analysis revealed that the risk of necrosis was higher when the surgery occurred after a long hospitalization time and there was no intraoperative epiphyseal perfusion. Four necrosis cases happened within the first 5 years, and 1 case in the last 5 years of the study. Conclusion Our study showed that necrosis was the most common complication. It also revealed that surgery delay and lack of intraoperative epiphysis perfusion potentially predispose to avascular necrosis. Although with no statistical significance, coxofemoral instability occurred in chronic SCFE, and surgical fixation with threaded wires was less effective than fixation with a cannulated screw. The modified Dunn procedure should be reserved for severe cases in which other techniques are not feasible and performed by an experienced, trained, and qualified team.

17.
Rev. bras. ortop ; 57(5): 807-814, Sept.-Oct. 2022. tab, graf
Artículo en Inglés | LILACS | ID: biblio-1407695

RESUMEN

Abstract Objective The present study analyzed the incidence of epiphyseal avascular necrosis in patients with slipped capital femoral epiphysis (SCFE) treated using a modified Dunn technique. In addition, this study determined the correlation of other variables with this incidence and described treatment complications. Methods This is a retrospective study with 20 patients treated by the same surgical team from 2009 to 2019 and followed up for 2 to 12 years. The analysis included general features, time from presentation to surgical procedure, classification, and intraoperative blood perfusion of the epiphysis, as well as complications and their treatment. Results All cases were severe; 65% were acute on chronic, and 55% of the SCFEs were unstable. Our complication rate was 45%, with 5 cases of avascular necrosis, 2 cases of deep infection, 1 case of material failure, and 1 case of joint instability. The statistical analysis revealed that the risk of necrosis was higher when the surgery occurred after a long hospitalization time and there was no intraoperative epiphyseal perfusion. Four necrosis cases happened within the first 5 years, and 1 case in the last 5 years of the study. Conclusion Our study showed that necrosis was the most common complication. It also revealed that surgery delay and lack of intraoperative epiphysis perfusion potentially predispose to avascular necrosis. Although with no statistical significance, coxofemoral instability occurred in chronic SCFE, and surgical fixation with threaded wires was less effective than fixation with a cannulated screw. The modified Dunn procedure should be reserved for severe cases in which other techniques are not feasible and performed by an experienced, trained, and qualified team.


Resumo Objetivo Analisar a incidência da necrose avascular da epífise no tratamento do escorregamento da epífise proximal do fêmur pela técnica de Dunn modificada, correlacionando-a com outras variáveis. Como objetivo secundário, descrevemos outras complicações encontradas. Métodos Estudo retrospectivo com 20 pacientes tratados entre 2009 e 2019, com seguimento de 2 a 12 anos, tratados pela mesma equipe cirúrgica. A análise incluiu características gerais, tempo entre apresentação e procedimento cirúrgico, classificação, presença de perfusão sanguínea intraoperatória da epífise, avaliação das complicações e seus respectivos tratamentos. Resultados Todos os casos eram graves, 65% crônicos agudizados e 55% dos escorregamentos eram instáveis. Nossa taxa de complicações foi de 45%, sendo 5 casos de necrose avascular, 2 de infecção profunda, uma falha do material e uma instabilidade articular. Pacientes operados com maior tempo após a internação e os sem perfusão intraoperatória da epífise tiveram maior risco de necrose na análise estatística. Considerando o tempo do estudo, tivemos 4 casos de necrose nos primeiros 5 anos e 1 caso nos últimos 5 anos. Conclusão Nosso estudo demonstrou que a necrose foi a complicação mais comum e que o atraso para a realização da cirurgia e a ausência de perfusão da epífise no intraoperatório podem predispor à necrose avascular. Embora não estatisticamente significante, a instabilidade coxofemoral foi observada na forma de apresentação crônica e a fixação cirúrgica com fios rosqueados se mostrou menos eficaz que a fixação com parafuso canulado. Este procedimento deve ser reservado para casos graves nos quais outras técnicas não sejam possíveis e realizado por equipe experiente, treinada e capacitada.


Asunto(s)
Humanos , Masculino , Femenino , Niño , Adolescente , Osteotomía , Estudios Retrospectivos , Necrosis de la Cabeza Femoral , Epífisis Desprendida de Cabeza Femoral/complicaciones , Necrosis
18.
Biomed Eng Online ; 21(1): 35, 2022 Jun 13.
Artículo en Inglés | MEDLINE | ID: mdl-35698224

RESUMEN

INTRODUCTION: Low- to high-energy impact trauma may cause from small fissures up to extended bone losses, which can be classified as closed or opened injuries (when they are visible at a naked eye). OBJECTIVE: The aim of this study was to investigate the feasibility of clinical diagnosis of bone trauma through medical infrared thermography, in a hospital emergency room. METHODS: Forty-five patients with suspected diagnosis of bone fracture were evaluated by means of medical infrared images, and the data correlated with the gold standard radiographic images, in the anteroposterior, lateral, and oblique views, at the orthopedic emergency department. The control group consisted of thermal images of the contralateral reference limb of the volunteers themselves. Data were acquired with a medical grade infrared camera in the regions of interest (ROIs) of leg, hand, forearm, clavicle, foot, and ankle. RESULTS: In all patients evaluated with a diagnosis of bone fracture, the mean temperature of the affected limb showed a positive difference greater than 0.9 °C (towards the contralateral), indicating the exact location of the bone trauma according, while the areas diagnosed with reduced blood supply, showed a mean temperature with a negative variation. CONCLUSION: Clinical evaluation using infrared imaging indicates a high applicability potential as a tool to support quick diagnosis of bone fractures in patients with acute orthopedic trauma in an emergency medical setting. The thermal results showed important physiological data related to vascularization of the bone fracture and areas adjacent to the trauma well correlated to radiographic examinations.


Asunto(s)
Fracturas Óseas , Termografía , Servicio de Urgencia en Hospital , Fracturas Óseas/diagnóstico por imagen , Humanos , Rayos Infrarrojos , Extremidad Inferior , Sensibilidad y Especificidad , Termografía/métodos
19.
Med Eng Phys ; 102: 103777, 2022 04.
Artículo en Inglés | MEDLINE | ID: mdl-35346438

RESUMEN

Non-contact infrared sensors are widely used as a diagnostic tool for elevated body temperature during initial screening for coronaviruses. The aim of this study was to investigate the thermal differences at three anatomical points: temple, forehead, and wrist, in the initial screening for temperature indicative of febrile and non-febrile states in skin pigmentation variations in Black, Half-Black and Caucasian skins, correlated with height and weight variables. Temperatures were obtained by means of an infrared thermometer in 289 volunteers with mean age of 18.30 ± 0.76, in a controlled environment according to Singapore Standard, SS582 part 1 and 2, normative standard IEC 80601-2-59, with standard technical protocols established by the International Organization for Standardization, ISO / TR 13154. The data were processed in MATLAB® R2021a, and data normality verified by Kolmogorov-Smirnov test, non-parametric data paired between temple / forehead / wrist were compared using the Wilcoxon signed-rank test. The results show different median temperatures in these anatomical regions, 37.2°C at the temple, 36.8°C at the forehead and 36.4°C at the wrist. As the temple region presents a temperature higher than the other investigated regions and, therefore, close to the core temperature, it should be considered for the initial screening of SARS-CoV-2 when using non-contact infrared thermometers. Furthermore, no significant changes were found due to variation in skin tone, height, or weight.


Asunto(s)
COVID-19 , Frente , Adolescente , Adulto , Temperatura Corporal , COVID-19/diagnóstico , Etnicidad , Humanos , SARS-CoV-2 , Tecnología , Temperatura , Muñeca , Adulto Joven
20.
Acta Ortop Bras ; 29(6): 323-326, 2021.
Artículo en Inglés | MEDLINE | ID: mdl-34849098

RESUMEN

OBJECTIVE: The aim of this study is to purpose a novel approach to the concomitant triplanar and tibial shaft fracture. METHODS: Retrospective study between 2001 and 2019. We collected the patients' general information, clinical and radiographic data, and complications after the following three-step treatment: (1) fixation of the Salter-Harris II fracture of the triplane fracture, (2) fixation of the Salter-Harris II/IV fracture with cannulated screws, and (3) fixation of the tibial fracture with flexible titanium nails. RESULTS: The study included seven patients (six males) with a mean age of 14 years and a mean follow-up of 6.4 years (minimum two years). Five triplane fractures had two fragments and two had three fragments. Five fractures were classified as Salter-Harris II and two as Salter-Harris IV. Three tibial fractures were long oblique, three were spiral, and one had a third fragment. Six fractures affected the middle third and one affected the distal third of the tibia. All triplane and tibial fractures consolidated without significant displacement. No physeal damage was identified. CONCLUSIONS: This study described the association of tibial fractures with triplane ankle fractures managed by our proposed treatment, which proved to be effective for this fracture association. Level of Evidence IV, Case Series.


OBJETIVO: Propor uma nova abordagem para fraturas concomitantes da diáfise da tíbia e triplanares do tornozelo. MÉTODOS: Estudo retrospectivo entre 2001 e 2019. Foram coletadas informações gerais: dados clínicos, radiográficos e complicações. As fraturas seguiram três passos no tratamento: (1) fixação do fragmento Salter-Harris tipo III da fratura triplanar; (2) fixação do fragmento Salter-Harris II/IV com parafuso canulado; e (3) fixação da fratura diafisária da tíbia com hastes flexíveis. RESULTADOS: O estudo incluiu sete pacientes (seis homens) com idade média de 14 anos e seguimento médio de 6.4 anos (mínimo de dois anos). Cinco fraturas triplanares tinham dois fragmentos principais e duas tinham três fragmentos. Cinco fraturas na radiografia em perfil foram classificadas como Salter-Harris II e duas como Salter-Harris IV. Três fraturas diafisárias tibiais tinham traço obliquo longo, três traço espiral e uma fratura com terceiro fragmento. Seis fraturas eram do terço médio e uma fratura do terço distal da tíbia. Todas as fraturas triplanares e tibiais consolidaram sem desvio significativo e não tivemos nenhuma lesão fisária. CONCLUSÃO: O estudo descreveu a associação da fratura da tíbia com a fratura triplanar do tornozelo e nossa proposta de tratamento, que se mostrou uma boa opção no tratamento dessa fratura especial. Nível de Evidência IV, Série de casos.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA