Zinc- and magnesium-doped hydroxyapatite-urea nanohybrids enhance wheat growth and nitrogen uptake.

The ongoing and unrestrained application of nitrogen fertilizer to agricultural lands has been directly linked to climate change and reductions in biodiversity. The agricultural sector needs a technological upgrade to adopt sustainable methods for maintaining high yield. We report synthesis of zinc and magnesium doped and undoped hydroxyapatite nanoparticles, and their urea nanohybrids, to sustainably deliver nitrogen to wheat. The urea nanohybrids loaded with up to 42% nitrogen were used as a new source of nitrogen and compared with a conventional urea-based fertilizer for efficient and sufficient nitrogen delivery to pot-grown wheat. Doping with zinc and magnesium manipulated the hydroxyapatite crystallinity for smaller size and higher nitrogen loading capacity. Interestingly, 50% and 25% doses of urea nanohybrids significantly boosted the wheat growth and yield compared with 100% doses of urea fertilizer. In addition, the nutritional elements uptake and grain protein and phospholipid levels were significantly enhanced in wheat treated with nanohybrids. These results demonstrate the potential of the multi-nutrient complexes, the zinc and magnesium doped and undoped hydroxyapatite-urea nanoparticles, as nitrogen delivery agents that reduce nitrogen inputs by at least 50% while maintaining wheat plant growth and nitrogen uptake to the same level as full-dose urea treatments.

Metal doped nitrogenous hydroxyapatite nanohybrids slowly release nitrogen to crops and mitigate ammonia volatilization: An impact assessment.

To supply adequate food, the ongoing and unrestrained administration of nitrogen fertilizer to agricultural fields is polluting the climate and living organisms. On the other hand, the agriculture sector urgently needs a technological upgrade to effectively confront hunger and poverty. Here, we report a rapid synthesis of zinc and magnesium-doped hydroxyapatite-urea nanohybrids for slow release and delivery of nitrogen to wheat and rice crops. Nanohybrids slowly release nitrogen for up to six weeks compared to the burst release of nitrogen from urea, and their use substantially reduces, by at least 3.8 times, ammonia emissions into the environment compared with that of urea fertilizer. A half­nitrogen dose applied as multi-nutrient complexed nanohybrids maintained crop growth, yield, and nutritional compositions in wheat and subsequent rice crops. Nanohybrids enhanced the wheat crop yield and nitrogen uptake by 22.13% and 58.30%, respectively. The synthesized nitrogen nanohybrids remained in the soil for two continuous crop cycles, reduced ammonia volatilization, and achieved nitrogen delivery to the crops. Additionally, soil dehydrogenase activity (534.55% above control) and urease activities (81.82% above control) suggest that nanohybrids exhibited no adverse impact on soil microorganisms. Our comprehensive study demonstrates the advantages of 'doping' as a method for tailoring hydroxyapatite nanoparticles properties for extended agricultural and environmental applications. The use of nanohybrids substantially reduced greenhouse gas emissions and enabled the reduction, by half, of nitrogen inputs into the agricultural fields. This study, therefore, reports a novel nano-enabled platform of engineered hydroxyapatite-urea nanohybrids as a nitrogen fertilizer for efficient nitrogen delivery that results in improved crop growth while minimizing environmental pollution.

Development of magnetic nanoparticle assisted aptamer-quantum dot based biosensor for the detection of Escherichia coli in water samples.

The contamination of food and potable water with microorganisms may cause food-borne and water-borne diseases. The common contaminants include Escherichia coli (E. coli), Salmonella sp. etc. The conventional methods for monitoring the water quality for the presence of bacterial contaminants are time-consuming, expensive, and not suitable for rapid on-spot detection in field conditions. In the current study, super paramagnetic iron oxide nanoparticles (SPIONs) were synthesized and conjugated with E. coli specific Aptamer I to detect E. coli cells qualitatively as well as quantitatively. The sludge consisting of E. coli- SPION complex was separated via magnetic separation. The presence of E. coli cells was confirmed with the help of standard techniques and confocal laser scanning microscopy (CLSM) employing Aptamer II conjugated CdTe-MPA quantum dots (QDs). Finally, an ATmega 328P prototype biosensor based on Aptamer II conjugated CdTe MPA QDs exhibited quantitative and qualitative abilities to detect E.coli. This prototype biosensor can even detect low bacterial counts (up to 1 × 102 cfu) with the help of a photodiode and plano-convex lens. Further, the prototype biosensor made up of ultraviolet light-emitting diode (UV LED), liquid crystal display (LCD) and ATmega328Pmicrocontroller offers on-spot detection of E.coli in water samples with high resolution and sensitivity. Similarly, this in-house developed prototype biosensor can also be utilized to detect bacterial contamination in food samples.

Fluorescent quantum dots: An insight on synthesis and potential biological application as drug carrier in cancer.

Quantum dots (QDs) are nanocrystals of semiconducting material possessing quantum mechanical characteristics with capability to get conjugated with drug moieties. The particle size of QDs varies from 2 to 10 nm and can radiate a wide range of colours depending upon their size. Their wide and diverse usage of QDs across the world is due to their adaptable properties like large quantum yield, photostability, and adjustable emission spectrum. QDs are nanomaterials with inherent electrical characteristics that can be used as drug carrier vehicle and as a diagnostic in the field of nanomedicine. Scientists from various fields are aggressively working for the development of single platform that can sense, can produce a microscopic image and even be used to deliver a therapeutic agent. QDs are the fluorescent nano dots with which the possibilities of the drug delivery to a targeted site and its biomedical imaging can be explored. This review is mainly focused on the different process of synthesis of QDs, their application especially in the areas of malignancies and as a theranostic tool. The attempt is to consolidate the data available for the use of QDs in the biomedical applications.

Synthesis of trap emission free cadmium sulfide quantum dots: Role of phosphonic acids and halide ions.

Changing the capping ligands of CdS nanocrystals during their synthesis controls the optical properties of these nanocrystals. Addition of a little amount of CdCl2:Phosphonic Acid (PA) completely eliminates the surface state emission with an increase in quantum yield of band edge emission from these nanocrystals. The role of halide ions in surface passivation along with the structural dependance of these nanocrystals on surface states has also been studied. These as prepared nanocrystals are uniform as well as monodispersed and their size can be tuned by varying the reaction time. These nanocrystals have been well characterized using a combination of optical and structural techniques.

Cancer Cell Targeting Using Folic Acid/Anti-HER2 Antibody Conjugated Fluorescent CdSe/CdS/ZnS-Mercaptopropionic Acid and CdTe-Mercaptosuccinic Acid Quantum Dots.

CdSe/CdS/ZnS and CdTe quantum dots (QDs) were synthesized by successive ion layer adsorption and reaction (SILAR) technique and direct aqueous synthesis respectively using thiol stabilizers. Synthesized CdSe/CdS/ZnS and CdTe QDs stabilized with 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) were used as fluorescent labels after conjugation with folic acid (FA) and anti-HER2 antibodies. Photoluminescence quantum yield of folated CdSe/CdS/ZnS-MPA and CdTe-MSA QDs was 59% and 77% than that of non-folated hydrophilic QDs. The folate receptor-mediated delivery of folic acid-conjugated CdTe-MSA and CdSe/CdS/ZnS-MPA QDs showed higher cellular internalization as observed by confocal laser scanning microscopic studies. Folated and non-folated CdTe-MSA QDs were highly toxic and exhibited only 10% cell viability as compared to > 80% cell viability with CdSe/CdS/ZnS-MPA QDs over the concentration ranging from 3.38 to 50 pmoles. Immunohistochemistry (IHC) results of human breast cancer tissue samples showed positive results with anti-HER2 antibody conjugated CdSe/CdS/ZnS-MPA QDs with better sensitivity and specificity as compared to conventional IHC analysis using diaminobenzedene staining.

Cancer Cell Targeting Using Folic Acid/Anti-HER2 Antibody Conjugated Fluorescent CdSe/CdS/ZnS-MPA and CdTe-MSA Quantum Dots.

CdSe/CdS/ZnS and CdTe quantum dots (QDs) were synthesized by successive ion layer adsorption and reaction (SILAR) technique and direct aqueous synthesis respectively using thiol stabilizers. Synthesized CdSe/CdS/ZnS and CdTe QDs stabilized with 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) were used as fluorescent labels after conjugation with folic acid (FA) and anti-HER2 antibodies. Photoluminescence quantum yield of folated CdSe/CdS/ZnS-MPA and CdTe-MSA QDs was 59% and 77% than that of non-folated hydrophilic QDs. The folate receptor-mediated delivery of folic acid-conjugated CdTe-MSA and CdSe/CdS/ZnS-MPA QDs showed higher cellular internalization as observed by confocal laser scanning microscopic studies. Folated and non-folated CdTe-MSA QDs were highly toxic and exhibited only 10% cell viability as compared to > 80% cell viability with CdSe/CdS/ZnS-MPA QDs over the concentration ranging from 3.38 to 50 pmoles. Immunohistochemistry (IHC) results of human breast cancer tissue samples showed positive results with anti-HER2 antibody conjugated CdSe/CdS/ZnS-MPA QDs with better sensitivity and specificity as compared to conventional IHC analysis using diaminobenzedene staining.

Simultaneous type-I/type-II emission from CdSe/CdS/ZnSe nano-heterostructures.

Core/intermediate/shell (C/I/S) structures with Type-I emission are well-known and are gaining immense importance due to their superior luminescence properties. Here, we report a unique C/I/S structure composed of CdSe/CdS/ZnSe that exhibits both Type-I and Type-II phenomena. The structures have been well characterized using a combination of optical and structural techniques. The photoluminescence (PL) and photoluminescence excitation (PLE) data indicate the formation of a combined Type-I and Type-II structure in one material, results supported by simple theoretical calculations. Single particle fluorescence reveals colocalization of both the emissions. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results confirm the structure of these particles. The time-resolved fluorescence studies show the possibility of tuning the lifetime of these materials by changing the Type-I/Type-II thickness ratios. It is possible to form these two separate excitons in the same system separated by a CdS intermediate layer that acts both as a barrier and an active member of the Type-II system allowing the generation and recombination of two excitons, in violation of Kasha's rule.

Photocatalysis from Fluorescence-Quenched CdSe/Au Nanoheterostructures: A Size-Dependent Study.

We report a systematic study of the electron-transfer process from CdSe quantum dots (QDs) to the Au tips as a function of the QD diameter and also the size of the Au-tip. For Au-tips smaller than ∼3 nm, that is, when they are still not metallic, a reduction in PL behavior is observed as the excited electrons are transferred from the QD-conduction band to Au, with quenching being higher for larger tips and smaller QDs. A combination of steady state and time-resolved studies establish the mechanism of charge transfer that is further confirmed by dye-degradation studies, showing the possibility of ambient day light photocatalysis.

Chitosan encapsulated quantum dots platform for leukemia detection.

We report results of the studies relating to electrophoretic deposition of nanostructured composite of chitosan (CS)-cadmium-telluride quantum dots (CdTe-QDs) onto indium-tin-oxide coated glass substrate. The high resolution transmission electron microscopic studies of the nanocomposite reveal molecular level coating of the CdTe-QDs with CS molecules in the colloidal dispersion medium. This novel composite platform has been explored to fabricate an electrochemical DNA biosensor for detection of chronic myelogenous leukemia (CML) by immobilizing amine terminated oligonucleotide probe sequence containing 22 base pairs, identified from BCR-ABL fusion gene. The results of differential pulse voltammetry reveal that this nucleic acid sensor can detect as low as 2.56 pM concentration of complementary target DNA with a response time of 60s. Further, the response characteristics show that this fabricated bioelectrode has a shelf life of about 6 weeks and can be used for about 5-6 times. The results of experiments conducted using clinical patient samples reveal that this sensor can be used to distinguish CML positive and the negative control samples.

Nanopatterned cadmium selenide Langmuir-Blodgett platform for leukemia detection.

We present results of the studies relating to preparation of Langmuir-Blodgett (LB) monolayers of tri-n-octylphosphine oxide-capped cadmium selenide quantum dots (QCdSe) onto indium-tin oxide (ITO) coated glass substrate. The monolayer behavior has been studied at the air-water interface under various subphase conditions. This nanopatterned platform has been explored to fabricate an electrochemical DNA biosensor for detection of chronic myelogenous leukemia (CML) by covalently immobilizing the thiol-terminated oligonucleotide probe sequence via a displacement reaction. The results of electrochemical response studies reveal that this biosensor can detect target DNA in the range of 10(-6) to 10(-14) M within 120 s, has a shelf life of 2 months, and can be used about 8 times. Further, this nucleic acid sensor has been found to distinguish the CML-positive and the control negative clinical patient samples.

Detection of bioconjugated quantum dots passivated with different ligands for bio-applications.

Bioconjugation of quantum dots has resulted in a significant increase in resolution of biological fluorescent labeling. This intrinsic property of quantum dots can be utilized for sensitive detection of target analytes with high sensitivity; including pathogenic bacteria and cancer monitoring. The quantum dots and quantum dot doped silica nanoparticles exhibit prominent emission peaks when excited at 400 nm but on conjugation to model rabbit antigoat antibodies exhibit diminished intensity of emission peak at 600 nm. It shows that photoluminescence intensity of conjugated quantum dots and quantum dot doped silica nanoparticles could permit the detection of bioconjugation. Samples of conjugated and unconjugated quantum dots and quantum dot doped silica nanoparticles were subjected to enzyme linked immunosorbent assay for further confirmation of bioconjugation. In the present study ligand exchange, bioconjugation, fluorescence detection of bioconjugated quantum dots and quantum dot doped silica nanoparticles and further confirmation of bioconjugation by enzyme linked immunosorbent assay has been described.