Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance.

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pKa and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

In vitro drug release, mechanical performance and stability testing of a custom silicone elastomer vaginal ring releasing dapivirine and levonorgestrel.

We have previously reported a multipurpose silicone elastomer vaginal ring providing sustained release of dapivirine (an antiretroviral) and levonorgestrel (a progestin) for HIV prevention and hormonal contraception. During initial development, issues arose due to reaction between the ethynyl group in the levonorgestrel molecule and the hydride-functionalised polydimethylsiloxane components in the silicone elastomer formulation. This unwanted reaction occurred both during and to a lesser extent after ring manufacture, impacting the curing process, the mechanical properties of the ring, and the in vitro release of levonorgestrel. Recently, we reported custom silicone elastomer grades that minimise this reaction. In this follow-on study, we describe the manufacture, in vitro drug release, mechanical, and pharmaceutical stability testing of ring formulations prepared from a custom silicone elastomer and containing 200 mg dapivirine and 80, 160, 240 or 320 mg levonorgestrel. The rings showed mechanical properties similar to marketed ring products, sustained in vitro release of both drugs over 30 days in quantities deemed clinically relevant, offered acceptable assay values, and provided good product stability over 15 weeks at 40 °C and 75% relative humidity.

Phase 1 pharmacokinetics and safety study of extended duration dapivirine vaginal rings in the United States.

INTRODUCTION: Vaginal rings are a promising approach to provide a woman-centred, long-acting HIV prevention strategy. Prior trials of a 25 mg dapivirine (DPV) ring have shown a favourable safety profile and approximately 30% risk reduction of HIV-1 infection. Extended duration rings replaced every three months may encourage user adherence, improve health service efficiency and reduce cost overall. We evaluated safety, pharmacokinetics, adherence and acceptability of two three-month rings with different DPV dosages, compared with the monthly DPV ring. METHODS: From December 2017 to October 2018, MTN-036/IPM-047 enrolled 49 HIV-negative participant in Birmingham, Alabama and San Francisco, California into a phase 1, randomized trial comparing two extended duration (three-month) rings (100 or 200 mg DPV) to a monthly 25 mg DPV ring, each used over 13 weeks, with follow-up completed in January 2019. Safety was assessed by recording adverse events (AEs). DPV concentrations were quantified in plasma, cervicovaginal fluid (CVF) and cervical tissue, at nominal timepoints. Geometric mean ratios (GMRs) relative to the comparator ring were estimated from a regression model. RESULTS: There were no differences in the proportion of participants with grade ≥2 genitourinary AEs or grade ≥3 AEs in the extended duration versus monthly ring arms (p = 1.0). Plasma and CVF DPV concentrations were higher in the extended duration rings compared to the monthly ring. Plasma GMRs were 1.31 to 1.85 and 1.41 to 1.86 and CVF GMRs were 1.45 to 2.87 and 1.74 to 2.60 for the 100 and 200 mg ring respectively. Cervical tissue concentrations were consistently higher in the 200 mg ring (GMRs 2.36 to 3.97). The majority of participants (82%) were fully adherent (ring inserted at all times, with no product discontinuations/outages) with no differences between the monthly versus three-month rings. Most participants found the ring acceptable (median = 8 on 10-point Likert scale), with a greater proportion of participants reporting high acceptability (9 or 10) in the 25 mg arm (73%) compared with the 100 mg (25%) and 200 mg (44%) arms (p = 0.01 and p = 0.15 respectively). CONCLUSIONS: The extended duration DPV rings were well-tolerated and achieved higher DPV concentrations compared with the monthly DPV ring. These findings support further evaluation of three-month DPV rings for HIV prevention.

Use of simulated vaginal and menstrual fluids to model in vivo discolouration of silicone elastomer vaginal rings.

Vaginal rings releasing antiretrovirals - either alone or in combination with contraceptive progestins - are being developed for prevention of human immunodeficiency virus (HIV) transmission via vaginal sex. Following Phase I trials, significant discolouration was observed on the surface of investigational silicone elastomer antiretroviral-contraceptive matrix-type vaginal rings containing either 25 mg dapivirine or 200 mg dapivirine plus levonorgestrel. In this study, potential causes of the discolouration have been assessed in vitro using simulated vaginal and menstrual fluids (SVF and SMF, respectively) to model in vivo exposure. The fluid compositions also included hydrogen peroxide (H2O2), hydrogen peroxide plus a copper intrauterine device (IUD), or synthetic dyes (representing personal care and household cleaning products). No discolouration was observed for rings exposed to SVF + hydrogen peroxide (with or without an IUD). However, the SVF + dye compositions showed significant ring discolouration, with staining patterns similar to those observed with rings that had been exposed to highly-coloured personal care and household cleaning products during clinical trial use. Exposure of rings to SMF compositions invariably caused yellow surface discolouration, dark spotting and markings, similar to the staining patterns observed following clinical use. The darker marks on the ring surface were identified as blood debris derived from the SMF. The study indicates that surface discolouration of rings in vivo can be attributed to exposure to menstrual fluid or highly coloured personal care or household cleaning products. Discolouration of the rings was not associated with any specific safety risks for the user, though severe discolouration could potentially impact acceptability and adherence.

Silicone elastomer formulations for improved performance of a multipurpose vaginal ring releasing dapivirine and levonorgestrel.

A dapivirine-releasing silicone elastomer vaginal ring for reducing women's risk of HIV acquisition has recently been approved. A next-generation multipurpose vaginal ring releasing dapivirine and levonorgestrel is currently in development, offering hormonal contraception and HIV prevention from a single device. Previously, we reported challenges with incorporating levonorgestrel into rings manufactured from addition-cure silicone elastomers due to an irreversible chemical reaction between the levonorgestrel molecule and the hydride-functionalised crosslinker component of the silicone elastomer formulation, leading to low drug content assay, cure inhibition, and reduced ring mechanical properties (which may account for the increased incidence of ring expulsion in vivo). Here, we report on the development and testing of various custom silicone elastomer materials specifically formulated to circumvent these issues. After extensive testing of the custom silicones and subsequent manufacture and testing (Shore M hardness, pot life, content assay, oscillatory rheology, mechanical testing) of rings containing both dapivirine and levonorgestrel, a lead candidate formulation was selected that was amenable to practical ring manufacture via injection molding, exhibited no substantial levonorgestrel binding, and offered suitable mechanical properties.

In vitro release testing methods for drug-releasing vaginal rings.

Drug-releasing vaginal rings are torus-shaped devices, generally fabricated from thermoplastic polymers or silicone elastomers, used to administer pharmaceutical drugs to the human vagina for periods typically ranging from three weeks to twelve months. One of the most important product performance tests for vaginal rings is the in vitro release test. Although it has been fifty years since a vaginal ring device was first described in the scientific literature, and despite seven drug-releasing vaginal rings having been approved for market, there is no universally accepted method for testing in vitro drug release, and only one non-compendial shaking incubator method (for the estradiol-releasing ring Estring®) is described in the US Food and Drug Administration's Dissolution Methods Database. Here, for the first time, we critically review the diverse range of test methods that have been described in the scientific literature for testing in vitro release of drug-releasing vaginal rings. Issues around in vitro-in vivo correlation and modelling of in vitro release data are also discussed.

Towards a dapivirine and levonorgestrel multipurpose vaginal ring: Investigations into the reaction between levonorgestrel and addition-cure silicone elastomers.

With a dapivirine-releasing vaginal ring having successfully completed late-stage clinical testing for HIV prevention and currently undergoing regulatory review, there is now growing interest in next-generation multipurpose prevention technologies that seek to combine antiretroviral and contraceptive drugs within a single product. Here, we focus on ongoing efforts to develop a silicone elastomer vaginal ring releasing both dapivirine and levonorgestrel. Specifically, we evaluate various strategies aimed at both better understanding and reducing the tendency of levonorgestrel to bind with the elastomer, including: (i) formulation and post-manufacturing strategies aimed at reducing the extent of levonorgestrel reaction with addition-cure silicone elastomers; (ii) evaluation of a simple silicone system to model the complex elastomer; (iii) use of model compounds representing the enone and ethinyl moieties of levonorgestrel to probe the mode of addition of levonorgestrel to addition-cure silicone elastomers; and (iv) solution and solid-state 13C NMR analysis to probe the structural features of the levonorgestrel-silicone system. The results demonstrate that both the enone and ethinyl groups within levonorgestrel undergo hydrosilylation reactions with the hydrosiloxane groups in the silicone elastomer leading to covalent binding. The results also highlight potential strategies for further optimising the dapivirine + levonorgestrel silicone vaginal ring formulation to ensure that the levonorgestrel is available for release.

Drug stability and product performance characteristics of a dapivirine-releasing vaginal ring under simulated real-world conditions.

In two recent Phase III clinical trials, use of a 25 mg dapivirine vaginal ring significantly reduced HIV acquisition rates. Post hoc analysis from one of the trials indicated higher rates of protection among women over the age of 21 years when compared to younger women, most likely due to reduced adherence in the latter group. There is currently no information available on how release of dapivirine from the ring is affected by either its intermittent removal from the vagina or women's cleaning of the ring before re-insertion. Here, in vitro drug stability and product performance characteristics of the dapivirine ring were assessed under simulated conditions of real-world use. The impact of systematic deviations from the 28-day continuous use protocol upon in vitro release performance, was investigated. Also, the effect of ring exposure to a range of common household chemicals - including bath salts, bleach, detergent and personal lubricants - was examined through measurement of dapivirine content and stability. Dapivirine in vitro release under intermittent schedules was similar to that obtained under the normal continuous schedule ignoring the periods of interruption. Ring exposure to various household chemicals had no discernible impact on dapivirine assay value, degradation or stability.

Packing Polymorphism of Dapivirine and Its Impact on the Performance of a Dapivirine-Releasing Silicone Elastomer Vaginal Ring.

A silicone elastomer vaginal ring providing sustained release over 28 days of the anti-retroviral microbicide dapivirine has recently completed phase III clinical testing and showed moderate protection against HIV acquisition. In support of the product licensure program, we report the impact of dapivirine packing polymorphism on the thermal and solubility characteristics of dapivirine and on the in vitro performance of the 25 mg dapivirine ring product. This is the first time that polymorphism has been reported for a drug-releasing vaginal ring product. Thermal, particle size, powder X-ray diffraction, and thermodynamic solubility analyses of dapivirine polymorphic forms I and IV, both of which are persistent at room temperature and with form I being the thermodynamically stable form, were conducted for both micronized and non-micronized materials. No significant differences in solubility between DPV forms I and IV were observed in media commonly used for in vitro release testing. Matrix-type silicone elastomer vaginal rings were manufactured and the impact of dapivirine polymorphism on key in vitro parameters (compression and tensile behavior; content assay; in vitro release; residual content assay) was investigated. The data demonstrate that dapivirine packing polymorphism has no significant impact on in vitro performance of the 25 mg dapivirine vaginal ring.

Safety and Efficacy of a Dapivirine Vaginal Ring for HIV Prevention in Women.

BACKGROUND: The incidence of human immunodeficiency virus (HIV) infection remains high among women in sub-Saharan Africa. We evaluated the safety and efficacy of extended use of a vaginal ring containing dapivirine for the prevention of HIV infection in 1959 healthy, sexually active women, 18 to 45 years of age, from seven communities in South Africa and Uganda. METHODS: In this randomized, double-blind, placebo-controlled, phase 3 trial, we randomly assigned participants in a 2:1 ratio to receive vaginal rings containing either 25 mg of dapivirine or placebo. Participants inserted the rings themselves every 4 weeks for up to 24 months. The primary efficacy end point was the rate of HIV type 1 (HIV-1) seroconversion. RESULTS: A total of 77 participants in the dapivirine group underwent HIV-1 seroconversion during 1888 person-years of follow-up (4.1 seroconversions per 100 person-years), as compared with 56 in the placebo group who underwent HIV-1 seroconversion during 917 person-years of follow-up (6.1 seroconversions per 100 person-years). The incidence of HIV-1 infection was 31% lower in the dapivirine group than in the placebo group (hazard ratio, 0.69; 95% confidence interval [CI], 0.49 to 0.99; P=0.04). There was no significant difference in efficacy of the dapivirine ring among women older than 21 years of age (hazard ratio for infection, 0.63; 95% CI, 0.41 to 0.97) and those 21 years of age or younger (hazard ratio, 0.85; 95% CI, 0.45 to 1.60; P=0.43 for treatment-by-age interaction). Among participants with HIV-1 infection, nonnucleoside reverse-transcriptase inhibitor resistance mutations were detected in 14 of 77 participants in the dapivirine group (18.2%) and in 9 of 56 (16.1%) in the placebo group. Serious adverse events occurred more often in the dapivirine group (in 38 participants [2.9%]) than in the placebo group (in 6 [0.9%]). However, no clear pattern was identified. CONCLUSIONS: Among women in sub-Saharan Africa, the dapivirine ring was not associated with any safety concerns and was associated with a rate of acquisition of HIV-1 infection that was lower than the rate with placebo. (Funded by the International Partnership for Microbicides; ClinicalTrials.gov number, NCT01539226 .).

Fibroblast Growth Factor Receptor-Dependent and -Independent Paracrine Signaling by Sunitinib-Resistant Renal Cell Carcinoma.

Antiangiogenic therapies, such as sunitinib, have revolutionized renal cell carcinoma (RCC) treatment. However, a precarious understanding of how resistance emerges and a lack of tractable experimental systems hinder progress. We evaluated the potential of primary RCC cultures (derived from tumors and tumor grafts) to signal to endothelial cells (EC) and fibroblasts in vitro and to stimulate angiogenesis ex vivo in chorioallantoic membrane (CAM) assays. From 65 patients, 27 primary cultures, including several from patients with sunitinib-resistant RCC, were established. RCC cells supported EC survival in coculture assays and induced angiogenesis in CAM assays. RCC-induced EC survival was sensitive to sunitinib in half of the tumors and was refractory in tumors from resistant patients. Sunitinib sensitivity correlated with vascular endothelial growth factor (VEGF) production. RCC induced paracrine extracellular signal-regulated kinase (ERK) activation in EC which was inhibited by sunitinib in sensitive but not in resistant tumors. As determined by fibroblast growth factor receptor substrate 2 (FRS2) phosphorylation in fibroblasts, RCC broadly induced low-level fibroblast growth factor receptor (FGFR) signaling. Whereas ERK activation in EC was uniformly inhibited by combined VEGF/platelet-derived growth factor (PDGF)/FGF receptor inhibitors, paracrine ERK activation in fibroblasts was blocked in only a fraction of tumors. Our data show that RCC activates EC through VEGF-dependent and -independent pathways, that sunitinib sensitivity correlates with VEGF-mediated ERK activation, and that combined inhibition of VEGF/PDGF/FGF receptors is sufficient to inhibit mitogenic signaling in EC but not in fibroblasts.

Post-use assay of vaginal rings (VRs) as a potential measure of clinical trial adherence.

Adherence measurement for microbicide use within the clinical trial setting remains a challenge for the HIV prevention field. This paper describes an assay method used for determining residual dapivirine levels in post-use vaginal rings from clinical trials conducted with the Dapivirine Vaginal Matrix Ring-004 developed by the International Partnership for Microbicides to prevent male to female HIV transmission. Post-use assay results from three Ring-004 clinical trials showed that of the 25mg drug load, approximately 4mg of dapivirine is released from the matrix ring over a 28-day use period. Data obtained by both in vitro and in vivo studies indicate that dapivirine is released according to a diffusion mechanism, as determined by conformance of both data sets to the Higuchi equation. This, coupled with the low variability associated with batch production over two manufacturing sites and 20 batches of material, provides evidence that post-use ring analysis can contribute to the assessment of adherence to ring use. Limitations of this method include the potential of intra-participant and inter-participant variability and uncertainty associated with measuring the low amount of dapivirine actually released relative to the drug load. Therefore, residual drug levels should not serve as the only direct measurement for microbicide adherence in vaginal ring clinical trials but should preferably be used as part of a multi-pronged approach towards understanding and assessing adherence to vaginal ring use.

Recent work on vaginal rings containing antiviral agents for HIV prevention.

PURPOSE OF REVIEW: In response to the need for strategies women can use to protect themselves from HIV infection, a new class of product commonly referred to as vaginal 'microbicides' has been under development for the past few decades. Several leading products currently in development contain antiviral agents delivered in a vaginal ring. RECENT FINDINGS: Research published over the past year reports advances in identification and continued formulation of specific antiviral agents that have potential for delivery in vaginal rings, including drug combinations for HIV, other sexually transmitted infections and contraception. Most products are antiretroviral reverse transcriptase inhibitors. Advances in vaginal ring design have also been reported; some of these are designed to release specific antiviral agents, while other designs could be used for multiple drugs. This review focuses both on antiviral agents and vaginal ring designs. SUMMARY: Over the past year, advances continued to be made in the development of vaginal rings to deliver antiviral agents for prevention of HIV. An array of antiviral agents and vaginal ring designs to deliver these products are at various stages in the product pipeline process. Results from the first efficacy trials of an antiretroviral-containing vaginal ring are expected soon and will inform the continued development of this important product class.

A validated tumorgraft model reveals activity of dovitinib against renal cell carcinoma.

Most anticancer drugs entering clinical trials fail to achieve approval from the U.S. Food and Drug Administration. Drug development is hampered by the lack of preclinical models with therapeutic predictive value. Herein, we report the development and validation of a tumorgraft model of renal cell carcinoma (RCC) and its application to the evaluation of an experimental drug. Tumor samples from 94 patients were implanted in the kidneys of mice without additives or disaggregation. Tumors from 35 of these patients formed tumorgrafts, and 16 stable lines were established. Samples from metastatic sites engrafted at higher frequency than those from primary tumors, and stable engraftment of primary tumors in mice correlated with decreased patient survival. Tumorgrafts retained the histology, gene expression, DNA copy number alterations, and more than 90% of the protein-coding gene mutations of the corresponding tumors. As determined by the induction of hypercalcemia in tumorgraft-bearing mice, tumorgrafts retained the ability to induce paraneoplastic syndromes. In studies simulating drug exposures in patients, RCC tumorgraft growth was inhibited by sunitinib and sirolimus (the active metabolite of temsirolimus in humans), but not by erlotinib, which was used as a control. Dovitinib, a drug in clinical development, showed greater activity than sunitinib and sirolimus. The routine incorporation of models recapitulating the molecular genetics and drug sensitivities of human tumors into preclinical programs has the potential to improve oncology drug development.

BAP1 loss defines a new class of renal cell carcinoma.

The molecular pathogenesis of renal cell carcinoma (RCC) is poorly understood. Whole-genome and exome sequencing followed by innovative tumorgraft analyses (to accurately determine mutant allele ratios) identified several putative two-hit tumor suppressor genes, including BAP1. The BAP1 protein, a nuclear deubiquitinase, is inactivated in 15% of clear cell RCCs. BAP1 cofractionates with and binds to HCF-1 in tumorgrafts. Mutations disrupting the HCF-1 binding motif impair BAP1-mediated suppression of cell proliferation but not deubiquitination of monoubiquitinated histone 2A lysine 119 (H2AK119ub1). BAP1 loss sensitizes RCC cells in vitro to genotoxic stress. Notably, mutations in BAP1 and PBRM1 anticorrelate in tumors (P = 3 × 10(-5)), [corrected] and combined loss of BAP1 and PBRM1 in a few RCCs was associated with rhabdoid features (q = 0.0007). BAP1 and PBRM1 regulate seemingly different gene expression programs, and BAP1 loss was associated with high tumor grade (q = 0.0005). Our results establish the foundation for an integrated pathological and molecular genetic classification of RCC, paving the way for subtype-specific treatments exploiting genetic vulnerabilities.