Br - nanoconjugate enhances the antibacterial efficacy of nimboloide against Flavobacterium columnare infection in Labeo rohita: A nanoinformatics approach.

BACKGROUND: The bacterial pathogen, Flavobacterium columnare causes columnaris disease in Labeo rohita globally. Major effects of this bacterial infection include skin rashes and gill necrosis. Nimbolide, the key ingredient of the leaf extract of Azadirachta indica possesses anti-bacterial properties effective against many microorganisms. Nano-informatics plays a promising role in drug development and its delivery against infections caused by multi-drug-resistant bacteria. Currently, studies in the disciplines of dentistry, food safety, bacteriology, mycology, virology, and parasitology are being conducted to learn more about the wide anti-virulence activity of nimbolide. METHODS: The toxicity of nimbolide was predicted to determine its dosage for treating bacterial infection in Labeo rohita. Further, comparative 3-D structure prediction and docking studies are done for nimbolide conjugated nanoparticles with several key target receptors to determine better natural ligands against columnaris disease. The nanoparticle conjugates are being designed using in-silico approaches to study molecular docking interactions with the target receptor. RESULTS: Bromine conjugated nimbolide shows the best molecular interaction with the target receptors of selected species ie L rohita. Nimbolide comes under the class III level of toxic compound so, attempts are made to reduce the dosage of the compound without compromising its efficiency. Further, bromine is also used as a common surfactant and can eliminate heavy metals from wastewater. CONCLUSION: The dosage of bromine-conjugated nimbolide can be reduced to a non-toxic level and thus the efficiency of the Nimbolide can be increased. Moreover, it can be used to synthesize nanoparticle composites which have potent antibacterial activity towards both gram-positive and gram-negative bacteria. This material also forms a good coating on the surface and kills both airborne and waterborne bacteria.

Ethnopharmacological Potential of Phytochemicals and Phytogenic Products against Human RNA Viral Diseases as Preventive Therapeutics.

RNA viruses have been the most destructive due to their transmissibility and lack of control measures. Developments of vaccines for RNA viruses are very tough or almost impossible as viruses are highly mutable. For the last few decades, most of the epidemic and pandemic viral diseases have wreaked huge devastation with innumerable fatalities. To combat this threat to mankind, plant-derived novel antiviral products may contribute as reliable alternatives. They are assumed to be nontoxic, less hazardous, and safe compounds that have been in uses in the beginning of human civilization. In this growing COVID-19 pandemic, the present review amalgamates and depicts the role of various plant products in curing viral diseases in humans.

Y12F mutation in Pseudomonas plecoglossicida S7 lipase enhances its thermal and pH stability for industrial applications: a combination of in silico and in vitro study.

Appropriate amino acid substitutions are critical for protein engineering to redesign catalytic properties of industrially important enzymes like lipases. The present study aimed for improving the environmental stability of lipase from Pseudomonas plecoglossicida S7 through site-directed mutagenesis driven by computational studies. lipA gene was amplified and sequenced. Both wild type (WT) and mutant type (MT) lipase genes were expressed into the pET SUMO system. The expressed proteins were purified and characterized for pH and thermostability. The lipase gene belonged to subfamily I.1 lipase. Molecular dynamics revealed that Y12F-palmitic acid complex had a greater binding affinity (-6.3 Kcal/mol) than WT (-6.0 Kcal/mol) complex. Interestingly, MDS showed that the binding affinity of WT-complex (-130.314 ± 15.11 KJ/mol) was more than mutant complex (-108.405 ± 69.376 KJ/mol) with a marked increase in the electrostatic energy of mutant (-26.969 ± 12.646 KJ/mol) as compared to WT (-15.082 ± 13.802 KJ/mol). Y12F mutant yielded 1.27 folds increase in lipase activity at 55 °C as compared to the purified WT protein. Also, Y12F mutant showed increased activity (~ 1.2 folds each) at both pH 6 and 10. P. plecoglossicida S7. Y12F mutation altered the kinetic parameters of MT (Km- 1.38 mM, Vmax- 22.32 µM/min) as compared to WT (Km- 1.52 mM, Vmax- 29.76 µM/min) thus increasing the binding affinity of mutant lipase. Y12F mutant lipase with better pH and thermal stability can be used in biocatalysis.

Multi-substrate sequential optimization, characterization and immobilization of lipase produced by Pseudomonas plecoglossicida S7.

Lipases are important biocatalysts having the third largest global demand after amylases and proteases. In the present study, we have screened 56 potential lipolytic Pseudomonas strains for their lipolytic activity. Pseudomonas plecoglossicida S7 showed highest lipase production with specific activity of 70 U/mg. Statistical optimizations using Plackett Burman design and response surface methodology evaluated fourteen different media supplements including various oilcakes, carbon sources, nitrogen sources, and metal ions which led to a 2.23-fold (156.23 U/mg) increase in lipase activity. Further, inoculum size optimization increased the overall lipase activity by 2.81-folds. The lipase was active over a range of 30-50° C with a pH range (7-10). The enzyme was tolerant to various solvents like chloroform, methanol, 1-butanol, acetonitrile, and dichloromethane and retained 60% of its activity in the presence of sodium dodecyl sulfate (0.5% w/v). The enzyme was immobilized onto Ca-alginate beads which increased thermal (20-60 °C) and pH stability (5-10). The purified enzyme could successfully remove sesame oil stains and degraded upto 25.2% of diesel contaminated soil. These properties of the lipase will help in its applicability in detergent formulations, wastewater treatments, and biodegradation of oil in the environment.

Leveraging multiomics approaches for producing lignocellulose degrading enzymes.

Lignocellulosic materials form the building block of 50% of plant biomass comprising non-chewable agri-components like wheat straw, rice stubbles, wood shavings and other crop residues. The degradation of lignin, cellulose and hemicellulose is complicated and presently being done by chemical process for industrial application through a very energy intensive process. Lignin degradation is primarily an oxidative process where the enzyme lignin peroxidase digests the polymer into smaller fragments. Being a recalcitrant component, higher lignin content poses a challenge of lower recovery of product for industrial use. Globally, the scientists are working on leveraging fungal biotechnology for using the lignocellulose degrading enzymes secreted by actinomycetes and basidiomycetes fungal groups. Enzymes contributing to degradation of lignin are mainly performing the function of modifying the lignin and degrading the lignin. Ligninolytic enzymes do not act as an independent reaction but are vital to complete the degradation process. Microbial enzyme technology is an emerging green tool in industrial biotechnology for commercial application. Bioprocessing of lignocellulosic biomass is challenged by limitations in enzymatic and conversion process where pretreatment and separation steps are done to remove lignin and hydrolyze carbohydrate into fermentable sugars. This review highlights recent advances in molecular biotechnology, lignin valorization, sequencing, decipher microbial membership, and characterize enzyme diversity through 'omics' techniques. Emerging techniques to characterize the interwoven metabolism and spatial interactions between anaerobes are also reviewed, which will prove critical to developing a predictive understanding of anaerobic communities to guide in microbiome engineering This requires more synergistic collaborations from microbial biotechnologists, bioprocess engineers, enzymologists, and other biotechnological fields.

Explainable stock prices prediction from financial news articles using sentiment analysis.

The stock market is very complex and volatile. It is impacted by positive and negative sentiments which are based on media releases. The scope of the stock price analysis relies upon ability to recognise the stock movements. It is based on technical fundamentals and understanding the hidden trends which the market follows. Stock price prediction has consistently been an extremely dynamic field of exploration and research work. However, arriving at the ideal degree of precision is still an enticing challenge. In this paper, we are proposing a combined effort of using efficient machine learning techniques coupled with a deep learning technique-Long Short Term Memory (LSTM)-to use them to predict the stock prices with a high level of accuracy. Sentiments derived by users from news headlines have a tremendous effect on the buying and selling patterns of the traders as they easily get influenced by what they read. Hence, fusing one more dimension of sentiments along with technical analysis should improve the prediction accuracy. LSTM networks have proved to be a very useful tool to learn and predict temporal data having long term dependencies. In our work, the LSTM model uses historical stock data along with sentiments from news items to create a better predictive model.

Getting the message right on nature-based solutions to climate change.

Nature-based solutions (NbS)-solutions to societal challenges that involve working with nature-have recently gained popularity as an integrated approach that can address climate change and biodiversity loss, while supporting sustainable development. Although well-designed NbS can deliver multiple benefits for people and nature, much of the recent limelight has been on tree planting for carbon sequestration. There are serious concerns that this is distracting from the need to rapidly phase out use of fossil fuels and protect existing intact ecosystems. There are also concerns that the expansion of forestry framed as a climate change mitigation solution is coming at the cost of carbon rich and biodiverse native ecosystems and local resource rights. Here, we discuss the promise and pitfalls of the NbS framing and its current political traction, and we present recommendations on how to get the message right. We urge policymakers, practitioners and researchers to consider the synergies and trade-offs associated with NbS and to follow four guiding principles to enable NbS to provide sustainable benefits to society: (1) NbS are not a substitute for the rapid phase out of fossil fuels; (2) NbS involve a wide range of ecosystems on land and in the sea, not just forests; (3) NbS are implemented with the full engagement and consent of Indigenous Peoples and local communities in a way that respects their cultural and ecological rights; and (4) NbS should be explicitly designed to provide measurable benefits for biodiversity. Only by following these guidelines will we design robust and resilient NbS that address the urgent challenges of climate change and biodiversity loss, sustaining nature and people together, now and into the future.

Surveillance of Microbiological Environment of Operation Theaters.

Introduction Control of infections in the operation theater (OT) is of utmost importance. Microbiological surveillance is an effective tool for identifying and controlling infections. The purpose of this study was to investigate the prevalence rate of microorganisms in OTs, to identify the type of microorganisms, and to detect contamination of various surfaces and air of OT. Methods OTs were properly cleaned with soap and water. All surfaces were disinfected, followed by fumigation with quaternary ammonium compounds. OTs were kept closed overnight. In the morning, they were opened, and samples were collected, taking all aseptic precautions. The settle plate method was used for air sampling, and the swab method was used for surface sampling. Samples were collected from four surfaces of OTs, i.e., floor, wall, table, and light, and samples of the OT air were also collected and immediately transported to the microbiology laboratory of the institution in sterile conditions. Result A total of 1640 swab samples were taken from eight OTs, out of which 487 (29.7%) were found positive for bacterial growth. Most of them were non-pathological microorganisms such as aerobic spore-forming Bacilli and Micrococcus. Among various OTs, septic OT showed the highest bacterial growth (82 positive cultures out of 200). In the surface sampling of various OTs, aerobic spore-forming Bacilli (221/487) was the most common isolate, followed by coagulase-negative Staphylococci (74/487), and Micrococcus (67/487). General surgery, septic, and emergency OTs had maximum air bioload (97, 93, and 91 colony-forming unit (CFU)/M3, respectively). Conclusion In surface sampling of OTs, it was found that septic OT and general surgery OT were most contaminated where the patient load was high. Among all the surfaces, OT walls and tables were most contaminated with pathogenic microorganisms. The average air bioload of all OTs was ranged between 79 and 97 CFU/M3.

Cysteine-rich antimicrobial peptides from plants: The future of antimicrobial therapy.

There has been a spurt in the spread of microbial resistance to antibiotics due to indiscriminate use of antimicrobial agents in human medicine, agriculture, and animal husbandry. It has been realized that conventional antibiotic therapy would be less effective in the coming decades and more emphasis should be given for the development of novel antiinfective therapies. Cysteine rich peptides (CRPs) are broad-spectrum antimicrobial agents that modulate the innate immune system of different life forms such as bacteria, protozoans, fungi, plants, insects, and animals. These are also expressed in several plant tissues in response to invasion by pathogens, and play a crucial role in the regulation of plant growth and development. The present work explores the importance of CRPs as potent antimicrobial agents, which can supplement and/or replace the conventional antibiotics. Different plant parts of diverse plant species showed the presence of antimicrobial peptides (AMPs), which had significant structural and functional diversity. The plant-derived AMPs exhibited potent activity toward a range of plant and animal pathogens, protozoans, insects, and even against cancer cells. The cysteine-rich AMPs have opened new avenues for the use of plants as biofactories for the production of antimicrobials and can be considered as promising antimicrobial drugs in biotherapeutics.

Biological Nanofactories: Using Living Forms for Metal Nanoparticle Synthesis.

Metal nanoparticles are nanosized entities with dimensions of 1-100 nm that are increasingly in demand due to applications in diverse fields like electronics, sensing, environmental remediation, oil recovery and drug delivery. Metal nanoparticles possess large surface energy and properties different from bulk materials due to their small size, large surface area with free dangling bonds and higher reactivity. High cost and pernicious effects associated with the chemical and physical methods of nanoparticle synthesis are gradually paving the way for biological methods due to their eco-friendly nature. Considering the vast potentiality of microbes and plants as sources, biological synthesis can serve as a green technique for the synthesis of nanoparticles as an alternative to conventional methods. A number of reviews are available on green synthesis of nanoparticles but few have focused on covering the entire biological agents in this process. Therefore present paper describes the use of various living organisms like bacteria, fungi, algae, bryophytes and tracheophytes in the biological synthesis of metal nanoparticles, the mechanisms involved and the advantages associated therein.

Production, characterization and antibacterial activity of silver nanoparticles produced by Fusarium oxysporum and monitoring of protein-ligand interaction through in-silico approaches.

The present study envisages biological production of silver nanoparticles using Fusarium oxysporum and in-silico identification of the antibacterial activity of the nanoparticles using protein-ligand interaction studies. The morphology of the nanoparticles was variable, with majority of them spherical in the size range 1-50 nm. For in-silico studies, two microorganisms, Escherichia coli and Pseudomonas aeruginosa were selected and metal docking was carried out using the licensed software SYBYL X 1.1.1. The ligand docked deeply into the binding pockets of the outer membrane proteins (OMPs) of both E. coli and P. aeruginosa. The results showed that silver may prove to be a strong antibacterial agent against both the pathogens, with the antibacterial action of silver being greater in the case of P. aeruginosa. The results obtained through in-silico studies were further validated by in-vitro approaches on both solid and liquid media to confirm the results obtained by in-silico analysis. The corroboration of in-silico and in-vitro results amply demonstrates the immense antibacterial potential of silver nanoparticles against the selected pathogens.

Biofilms and human health.

A biofilm can be defined as a surface-attached (sessile) community of microorganisms embedded and growing in a self-produced matrix of extracellular polymeric substances. These biofilm communities can be found in medical, industrial and natural environments, and can also be engineered in vitro for various biotechnological applications. Biofilms play a significant role in the transmission and persistence of human disease especially for diseases associated with inert surfaces, including medical devices for internal or external use. Biofilm infections on implants or in-dwelling devices are difficult to eradicate because of their much better protection against macrophages and antibiotics, compared to free living cells, leading to severe clinical complications often with lethal outcome. Recent developments in nanotechnology have provided novel approaches to preventing and dispersing biofilm related infections and potentially providing a novel method for fighting infections that is nondrug related.

Aetiology of childhood viral gastroenteritis in Lucknow, north India.

BACKGROUND & OBJECTIVES: Due to limited availability of data on viral aetiology of acute gastroenteritis in north India, the present study was planned to detect rotavirus, norovirus, sapovirus and astrovirus in stool samples of both in hospitalized and non-hospitalized children less than five years of age presenting with acute gastroenteritis. METHODS: A total of 278 stool samples from equal number of children were tested for rotavirus antigen using ELISA and for norovirus, sapovirus and astroviruses by reverse transcription (RT)-PCR. RESULTS: Of the 169 samples from hospitalized patients, rotavirus, norovirus, sapovirus and astrovirus were detected in 19.5, 2.3, 3.5 and 2.9 per cent samples, respectively. Of the 109 samples collected from the non-hospitalized patients, frequency of rotavirus and sapovirus detection was 9.1 and 1.8 per cent, respectively while norovirus and astrovirus were not detected. INTERPRETATION & CONCLUSIONS: Rotavirus was the most frequent cause of viral gastroenteritis in both hospitalized and non-hospitalized children. Maximum positivity of the viruses was seen in children less than two years of age.

Penetrating injury of face by a large machine bolt-a rare case report.

Foreign bodies are often encountered by oral and maxillofacial surgeons and may present a diagnostic challenge, due to many factors such as nature of foreign body material, the size of the object, difficult access and a close anatomical relationship of the foreign body to vital structures. There are foreign bodies like glass pieces, plastic materials, wooden pieces are not seen in routine radiographs and often misdiagnosed. To reduce the chances of complications presence of foreign body in the patients head and neck region must be thoroughly investigated by the surgeon. Penetrating injuries by blunt object is rare finding in maxillofacial region. Here we present an unusual case of penetrating injury by a large machine bolt (15.0 cm) in a 7 year old child, embedded on left side of face.

Genes and oral cancer.

Oral cancers have been one of the leading causes of deaths particularly in the developing countries. Prime reason for this high mortality and morbidity is attributed to the delay in diagnosis and prompt treatment. Relentless research in the field of oncology has led to the advent of novel procedures for the early detection of oral cancers. Molecular biology is highly promising in this regard. It is a procedure that detects alterations at a molecular level much before they are seen under a microscope and much before clinical changes occur. Molecular studies serve as the basis by which we will eventually be able not only to augment clinical assessment and classification of oral lesions but also predict malignant potential of oral lesions, thus reducing the incidence and increasing the scope for early diagnosis and treatment of oral cancers. However, making such sophisticated tools available for the common man in developing countries is one of the most important challenges faced today.

Audit of patients with severe acute pancreatitis admitted to an intensive care unit.

BACKGROUND: Severe acute pancreatitis (SAP) is a disease with high morbidity and mortality. We undertook a study of patients with SAP admitted to the intensive care unit (ICU) of a tertiary referral hospital. METHODS: Between 2002 and 2007, 50 patients with SAP were admitted in our intensive care unit (ICU). Data were collected from their medical records and their clinical profile, course and outcome were retrospectively analyzed. Patients were categorized into survivor and nonsurvivor groups, and were further classified based on interventions such as percutaneous drainage and surgical necrosectomy. RESULTS: SAP contributed 5 % of total ICU admissions during the study period. Median age of survivors (n = 20) was 34 against 44 years in nonsurvivors (n = 30). Median Acute Physiology and Chronic Health Evaluation (APACHE) II score in nonsurvivors was 16.5 (8-32) vs. 12.5 (5-20) in survivors (p = 0.002). Patients with APACHE II score ≥12 had mortality >80 % compared to 23 % with score <12 (p < 0.001). Median Sequential Organ Failure Assessment (SOFA) scores on admission and on days 3, 7, 14, and 21 were significantly higher in nonsurvivors compared to survivors (p < 0.05). Mean (SD) intraabdominal pressure was 23 (3.37) mmHg in nonsurvivors vs. 19.05 (2.51) in survivors (p < 0.05). Patients with renal failure had significant mortality (p < 0.001). Length of ICU stay, requirement for vasopressor, total parenteral nutrition, and the amount of blood and blood product transfusions differed significantly between patients with and without intervention. CONCLUSIONS: APACHE II and SOFA scores and other clinical data correlated with outcome in SAP admitted to ICU.

Approaches for enhanced phytoextraction of heavy metals.

The contamination of the environment with toxic metals has become a worldwide problem. Metal toxicity affects crop yields, soil biomass and fertility. Soils polluted with heavy metals pose a serious health hazard to humans as well as plants and animals, and often requires soil remediation practices. Phytoextraction refers to the uptake of contaminants from soil or water by plant roots and their translocation to any harvestable plant part. Phytoextraction has the potential to remove contaminants and promote long-term cleanup of soil or wastewater. The success of phytoextraction as a potential environmental cleanup technology depends on factors like metal availability for uptake, as well as plants ability to absorb and accumulate metals in aerial parts. Efforts are ongoing to understand the genetics and biochemistry of metal uptake, transport and storage in hyperaccumulator plants so as to be able to develop transgenic plants with improved phytoremediation capability. Many plant species are being investigated to determine their usefulness for phytoextraction, especially high biomass crops. The present review aims to give an updated version of information available with respect to metal tolerance and accumulation mechanisms in plants, as well as on the environmental and genetic factors affecting heavy metal uptake. The genetic tools of classical breeding and genetic engineering have opened the door to creation of 'remediation' cultivars. An overview is presented on the possible strategies for developing novel genotypes with increased metal accumulation and tolerance to toxicity.