Altered sensation following extrusion of an endodontic file treated by intentional replantation: case report and treatment recommendations.

OBJECTIVE: An altered sensation during endodontic treatment can occur due to the extrusion of endodontic materials. This study aims to discuss intentional replantation to address paresthesia resulting from an endodontic file penetrating the inferior alveolar nerve canal (IANC) and provide a protocol for managing nerve injuries in such incidents. CASE PRESENTATION: A 12-year-old girl developed paresthesia when an endodontic file separated and was inadvertently pushed through the apical foramen into IANC during root canal treatment of the mandibular left first molar. A CBCT scan revealed the file penetrating the canal towards the inferior border of the mandible. After considering the treatment options, intentional replantation was deemed suitable. The tooth was a-traumatically extracted and preserved in sterile saline. The surgeon then carefully cleaned and irrigated the socket. The radiographic assessment confirmed successful file removal from the socket. The Root ends were resected, and retrograde preparation and obturation were conducted using ultrasonic tips and MTA. The tooth was then replanted into the socket. Successful replantation was confirmed by tooth stability and an audible click. The patient was prescribed antibiotics and steroids. Subsequently, after completing the endodontic treatment. a stainless-steel crown was cemented. The successful intentional replantation procedure resulted in rapid improvement in the patient's condition. The normal sensation had been restored, indicating nerve recovery. At the 15-month follow-up, Periapical bone healing and the eruption of the adjacent second molar were observed, affirming the treatment protocol's overall success. CONCLUSION: Prompt intervention and immediate intentional replantation facilitated direct inspection of the separated file within the socket. Collaboration between an oral maxillofacial surgeon and an endodontist ensures expedited and targeted treatment, leading to favorable outcomes.

Computer-Assisted Evaluation Confirms Spontaneous Healing of Donor Site One Year following Bone Block Harvesting from Mandibular Retromolar Region-A Cohort Study.

Bone augmentation prior to dental implant placement is a common scenario in the dental implantology field. Among the important intraoral harvesting sites to obtain bone blocks is the ramus/retromolar region that has a high success rate and long-lasting alveolar ridge augmentation. Preserving the bone volume and quality at the donor site is crucial for preventing further complications or to serve as a site for re-harvesting. Healing of the intraoral donor sites has been described in the maxillofacial field. This study aimed to evaluate the spontaneous healing of the mandibular retromolar donor site utilizing computer-assisted quantification 6 and 12 months after bone harvesting. MATERIALS AND METHODS: The study was conducted on patients who underwent an alveolar ridge augmentation using an intraoral retromolar bone graft. Three CBCT scans were performed-intraoperative, and at six months and one year after the surgical procedure. By using the Materialise Mimics Innovation Suite software 26.0 features segmentation by thresholding, Hounsfield unit averaging, and superimposition of the tomographies, we could precisely quantify the healing process utilizing spatial and characteristic measures. RESULTS: In all cases, the computer-aided quantification showed that six months following surgery, the donor site had recovered up to 64.5% ± 4.24 of its initial volume, and this recovery increased to 89.2% ± 2.6 after one year. Moreover, the Hounsfield unit averaging confirmed dynamic bone quality healing, starting at 690.3 ± 81 HU for the bone block, decreasing to 102 ± 27.8 HU at six months postoperatively, and improving to 453.9 ± 91.4 HU at the donor site after a year. CONCLUSIONS: This study demonstrates that there is no need for additional replanting at the donor site following retromolar bone block harvesting, whether autogenous or allograft, since spontaneous healing occurs 12 months following the surgery.

Recommendations on the Use of Oral Orthotic Occlusal Appliance Therapy for Temporomandibular Joint Disorders: Current Evidence and Clinical Practice.

Background: 'Temporomandibular joint disorders (TMDs)' denote an umbrella term that includes arthritic, musculoskeletal and neuromuscular conditions involving the temporomandibular joint, the masticatory muscles, and the associated tissues. Occlusal devices are one of the common treatment modalities utilized in the conservative management of TMDs. The indications for the available 'oral splints' or 'oral orthotic occlusal devices' remain ambiguous. Methods: A joint international consortium was formulated involving the subject experts at TMJ Foundation, to resolve the current ambiguity regarding the use of oral orthotic occlusal appliance therapy for the temporomandibular joint disorders based on the current scientific and clinical evidence. Results: The recommendations and the conclusion of the clinical experts of the joint international consort has been summarized for understanding the indications of the various available oral orthotic occlusal appliances and to aid in the future research on oral occlusal orthotics. Conclusion: The use of the oral orthotic occlusal appliances should be based on the current available scientific evidence, rather than the archaic protocols.

Enhanced socket preparation during autotransplantation: a new treatment protocol.

OBJECTIVE: Tooth autotransplantation (AT) is a viable option for the replacement of unrestorable or missing teeth. Recently, the use of a 3D replica of a donor tooth constructed from CBCT scans was described. The model is made to assess the recipient site's size and minimize the required extraoral time of the donor tooth after extraction. The aim of the paper was to describe a new technique for AT using the 3D replica as a socket preparation tool. CASE REPORT: A 13-year-old boy who presented with hypodontia was referred for consultation and treatment. The treatment plan included combined orthodontic treatment and AT of the mandibular left second premolar into the site of the congenitally missing maxillary right canine. A titanium 3D model of the donor tooth was printed by a direct metal laser 3D printer utilizing the model from the CBCT scan. An intrasulcular flap was elevated, and the edentulous maxillary ridge was prepared using implant trephine burs with increasing diameters. A surgical mallet was utilized to apply vertical forces to the 3D-printed model, which was inserted into the prepared socket to allow a perfect fit for the donor tooth. After atraumatic extraction of the mandibular left second premolar, the donor tooth was inserted into the ready socket and splinted. Follow-up examinations at 1, 3, and 6 months, and 1 year after surgery demonstrated a successful outcome. CONCLUSION: The titanium replica was successfully used for precise preparation of the recipient site, minimizing the extraoral time of the procedure to 4 minutes, and thereby improving the expected outcome. (Quintessence Int 2023;54:142-148; doi: 10.3290/j.qi.b3649031).

Expanding the Surgeon's Armamentarium: Use of the Tubing Technique to Preserve the Inferior Alveolar Nerve During Transposition Procedure.

Severe edentulous posterior mandible atrophy with inadequate bone height superior to the inferior alveolar canal may increase the risk of neurosensory impairment and other complications during inferior alveolar nerve (IAN) transposition (IANT) prior to dental implant insertion. The current report describes the tubing technique as a practical and feasible procedure that ensures IAN preservation during IANT. The technique involves wrapping a standard suction catheter around the exposed nerve to facilitate full coverage. This work presents a retrospective review of 31 patients undergoing IANT procedures followed by immediate placement of dental implants between January 2015 and January 2020. IANT was performed either unilaterally or bilaterally on all patients, followed by IAN tubing before implant placement. A total of 46 IANT procedures involving the tubing technique were performed. Overall, 149 dental implants were inserted during IANT surgeries, with a success rate of 98.6%. Sensory disturbance was documented in 47.8% of the treated sites (left/right mandible) at 1 month (22/46 sites), 21.7% at 3 months (10/46 sites), 6.5% at 6 months (3/46 sites), and 2.2% at 12 months (1/46 sites) postimplantation. In total, except for 1 case, sensory disturbance was fully resolved by the end of the 12-month follow-up period. Taken together, the tubing technique described herein is a practical and reproducible method for protecting the IAN during transposition.

Injectable Hydrogels Based on Inter-Polyelectrolyte Interactions between Hyaluronic Acid, Gelatin, and Cationic Cellulose Nanocrystals.

The present work dealt with the development of physically cross-linked injectable hydrogels with potential applications in tissue engineering. The hydrogels were composed of a ternary mixture of a polyanion and a polyampholyte, hyaluronic acid (HA) and gelatin, respectively, bridged by cationic cellulose nanocrystals (cCNCs). A 3D network is formed by employing attractive electrostatic interactions and hydrogen bonding between these components under physiological conditions. The hydrogels demonstrated low viscosity at high stresses, enabling easy injection, structural stability at low stresses (<15 Pa), and nearly complete structure recovery within several minutes. Increasing the cCNC content (>3%) reduced hydrogel swelling and decelerated the degradation in phosphate-buffered saline as compared to that in pure HA and HA-gelatin samples. Biological evaluation of the hydrogel elutions showed excellent cell viability. The proliferation of fibroblasts exposed to elutions of hydrogels with 5% cCNCs reached ∼200% compared to that in the positive control after 11 days. Considering these results, the prepared hydrogels hold great potential in biomedical applications, such as injectable dermal fillers, 3D bioprintable inks, or 3D scaffolds to support and promote soft tissue regeneration.

3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery.

Compared to traditional manufacturing methods, additive manufacturing and 3D printing stand out in their ability to rapidly fabricate complex structures and precise geometries. The growing need for products with different designs, purposes and materials led to the development of 3D printing, serving as a driving force for the 4th industrial revolution and digitization of manufacturing. 3D printing has had a global impact on healthcare, with patient-customized implants now replacing generic implantable medical devices. This revolution has had a particularly significant impact on oral and maxillofacial surgery, where surgeons rely on precision medicine in everyday practice. Trauma, orthognathic surgery and total joint replacement therapy represent several examples of treatments improved by 3D technologies. The widespread and rapid implementation of 3D technologies in clinical settings has led to the development of point-of-care treatment facilities with in-house infrastructure, enabling surgical teams to participate in the 3D design and manufacturing of devices. 3D technologies have had a tremendous impact on clinical outcomes and on the way clinicians approach treatment planning. The current review offers our perspective on the implementation of 3D-based technologies in the field of oral and maxillofacial surgery, while indicating major clinical applications. Moreover, the current report outlines the 3D printing point-of-care concept in the field of oral and maxillofacial surgery.

The Modulatory Effect of Adipose-Derived Stem Cells on Endometrial Polyp Fibroblasts.

Endometrial polyps (EPs) are benign overgrowths of the endometrium, with the potential to cause severe complications, ranging from discomfort to inflammation and infertility. Dysfunction of endometrial fibroblasts may be a critical component leading to the development of polyps. Although surgical intervention is the common remedy for severe cases, it comes with drawbacks, including infection, bleeding, and risk of damage to the cervix and adjacent tissues. Adipose-derived mesenchymal stromal cells (ASCs) are at the focus of modern medicine, as key modulators of tissue homeostasis, inflammation, and tissue repair, rendering them prime candidate agents for tissue regeneration and cell-based therapies. In this study, EPs were isolated from patients admitted to the OB/GYN department at the Galilee Medical Center and extracted fibroblasts (endometrial polyp fibroblasts, EPFs) were isolated and characterized. ASCs were isolated from healthy patients. The effect of EPF- and ASC-conditioned media (CM) on polyp-derived fibroblasts was evaluated, in both 2D and 3D assays, as well as on the expression of matrix-related gene expression. Herein, EPFs exposed to ASC-CM exhibited reduced migration, invasion, contraction of hydrogels, and extracellular matrix deposition, compared with those exposed to EPF-CM. Altogether, this study suggests that ASCs may have a modulating effect on fibroblasts involved in forming EPs and may serve as the basis for conservative treatment strategies aimed at treating severe cases of EPs.

Comparisons between lysis and lavage, intra-articular steroid injections, and three-point subsynovial steroid injections using operative single-cannula arthroscopy - A retrospective analysis.

The aim of this study is to compare the effectiveness of intra-articular and three-point sub-synovial steroid injections. In this retrospective Cohort study an OSCA lysis and lavage, intra-articular and threepoint sub-synovial steroid injections were performed and the maximal interincisinal opening (MIO), pain using 10- point visual analog scale (VAS) and quality of life (QOL) were measured one week before the procedure and 1, 3, 6, 12 months, and 2 and 3years after surgery. Sixty-five patients suffering from internal derangement refractory to conservative treatment charts were reviewed. successfully lowered pain (p value = 0.0012), and improved mouth opening (p value = 0.023), and quality of life (QoL) (p value = 0.003) for up to 6 months after surgery. OSCA with intra-articular CS injections effectively lowered pain (p value = 0.0025), and improved mouth opening (p value = 0.03) and QoL (p value = 0.004) for 12 months. In comparison, OSCA with sub-synovial steroid injections was significantly effective in lowering pain (p value = 0.000002), improving mouth opening (p value = 0.000004), and QoL (p value p = 0.000006) for the duration of the 36-month follow-up period within the limitations of the study it seems that the OSCA technique with site-specific, sub-synovial CS injections should be the preferred treatment approach when the priority is long-term success concerning pain relief, increased mouth opening and improved quality of life in Wilkes II-IV patients.

COVID-19 knowledge and adherence of dental practitioners to health authority safety guidelines during a pandemic.

OBJECTIVES: This study aimed to assess the degree of dental practitioner adherence to recommendations made during the COVID-19 pandemic. METHOD AND MATERIALS: An online questionnaire was distributed via social media among dental practitioners in Israel who worked during the COVID-19 outbreak. RESULTS: In total, 144 dental practitioners completed the survey; it was found that dental practitioner adherence to all the official PPE use recommendations was 69.8%, whereas 36.8% of dental practitioners reported the use of N95 when needed. Knowledge of self-protection against COVID-19 was rated as "very good" by 37.5% of responders. However, only 25.7% felt "highly protected" by personal protective equipment. Interestingly, many dental practitioners (46.8%) reported adherence to extra protection in addition to the required PPE communicated by the Ministry of Health guidelines. CONCLUSION: Stricter regimens should be applied for dealing with the current challenging pandemic, especially in clinical work with a higher risk for viral transmission. Specific strategies should be followed to ensure good practice to improve dental practitioners' and patients' safety.

Decline in Maxillofacial Injuries during the Pandemic: The Hidden Face of COVID-19.

Maxillofacial injuries result from a variety of daily activities. Traffic accidents, interpersonal violence, and falls represent some of the most common etiological factors behind maxillofacial fractures. During the COVID-19 outbreak, the social distancing measures imposed by healthcare authorities aimed at abolishing the spread of the viral infection. This study aimed to evaluate the effect of social distancing measures on the incidence of maxillofacial injuries. METHODS: Data were retrieved from the medical file registry at the Galilee Medical Center, Nahariya, Israel. Incidence, gender, age, etiology, and cost of hospitalization during the COVID-19 lockdown and the previous periods were retrieved. RESULTS: A decrease in maxillofacial fractures was registered during the 2020 lockdown; younger patients had the largest share of maxillofacial traumas during this period. The midface was the most involved facial region in both periods, and a reduction of 62.3% in the cost of OMF fracture treatment was observed during the COVID-19 era. CONCLUSIONS: The occurrence, etiology, and cost of treatment of maxillofacial injuries during the COVID-19 period were different from those in the corresponding period in the pre-COVID-19 era. These results can provide a guide to help design programs for the prevention of OMF trauma.

Unified platform for genetic and serological detection of COVID-19 with single-molecule technology.

The COVID-19 pandemic raises the need for diverse diagnostic approaches to rapidly detect different stages of viral infection. The flexible and quantitative nature of single-molecule imaging technology renders it optimal for development of new diagnostic tools. Here we present a proof-of-concept for a single-molecule based, enzyme-free assay for detection of SARS-CoV-2. The unified platform we developed allows direct detection of the viral genetic material from patients' samples, as well as their immune response consisting of IgG and IgM antibodies. Thus, it establishes a platform for diagnostics of COVID-19, which could also be adjusted to diagnose additional pathogens.

Unified platform for genetic and serological detection of COVID-19 with single-molecule technology.

The COVID-19 pandemic raises the need for diverse diagnostic approaches to rapidly detect different stages of viral infection. The flexible and quantitative nature of single-molecule imaging technology renders it optimal for development of new diagnostic tools. Here we present a proof-of-concept for a single-molecule based, enzyme-free assay for detection of SARS-CoV-2. The unified platform we developed allows direct detection of the viral genetic material from patients' samples, as well as their immune response consisting of IgG and IgM antibodies. Thus, it establishes a platform for diagnostics of COVID-19, which could also be adjusted to diagnose additional pathogens.

Auditory Performance in Recovered SARS-COV-2 Patients.

OBJECTIVE: While COVID-19 symptoms impact rhinology (anosmia) and laryngology (airways), two major disciplines of the otolaryngology armamentarium, the virus has seemed to spare the auditory system. A recent study, however, reported changes in otoacoustic emission (OAE) signals measured in SARS-COV-2 positive patients. We sought to assess the effect of COVID-19 infection on auditory performance in a cohort of recovered SARS-COV-2 patients and controls. To avoid a potential bias of previous audiological dysfunction not related to SARS-COV-2 infection, the study encompasses patients with normal auditory history. We hypothesized that if SARS-COV-2 infection predisposes to hearing loss, we would observe subtle and early audiometric deficits in our cohort in the form of subclinical auditory changes. STUDY DESIGN: Cross-sectional study. SETTING: Tertiary referral center. PATIENTS: The Institutional Review Board approved the study and we recruited participants who had been positive for SARS-COV-2 infection, according to an Reverse Transcription Polymerase Chain Reaction (RT-PCR) test on two nasopharyngeal swabs. The patients included in this study were asymptomatic for the SARS-COV-2 infection and were evaluated following recovery, confirmed by repeated swab testing. The control group comprised healthy individuals matched for age and sex, and with a normal auditory and otologic history. INTERVENTIONS: The eligibility to participate in this study included a normal audiogram, no previous auditory symptoms, normal otoscopy examination with an intact tympanic membrane, and bilateral tympanometry type A. None of our volunteers reported any new auditory symptoms following SARS-COV-2 infection. Ototacoustic emissions (OAE) and auditory brainstem response (ABR) measurements were used to evaluate the auditory function. MAIN OUTCOME MEASURES: OAE and ABR measurements. RESULTS: We have found no significant differences between recovered asymptomatic SARS-COV-2 patients and controls in any of transitory evoked otoacoustic emission (TEOAE), distortion product otoacoustic emissions (DPOAE), or ABR responses. CONCLUSIONS: There is no cochlear dysfunction represented by ABR, TEOAE, and DPOAE responses in recovered COVID-19 asymptomatic patients. Retrocochlear function was also preserved as evident by the ABR responses. A long-term evaluation of a larger cohort of SARS-COV-2 patients will help to identify a possible contribution of SARS-COV-2 infection to recently published anecdotal auditory symptoms associated with COVID-19.

The power of three-dimensional printing technology in functional restoration of rare maxillomandibular deformity due to genetic disorder: a case report.

BACKGROUND: Thalassemia is an inherited autosomal recessive blood disorder causing abnormal formation of hemoglobin, known as a syndrome of anemia with microcytic erythrocytes. It is the most common genetic disorder worldwide, with a high prevalence among individuals of Mediterranean descent. The state of homozygosity of the beta-globin mutated gene is known as beta-thalassemia major, and these patients require regular blood transfusions and iron chelation therapy for survival. The rapid loss of red blood cells among affected individuals activates compensatory mechanisms of excessive medullary and extramedullary hematopoiesis, leading to severe skeletal bone deformity. CASE PRESENTATION: We present the case of a 39-year-old Bedouin male, diagnosed with beta-thalassemia major at infancy, with diagnosed homozygosity for the intervening sequence 2-1 (guanine > adenine) mutation. Since early infancy, he started receiving blood transfusions with a gradual increase in treatment frequency through adulthood due to the severe clinical progression of the disease. He was referred to the oral and maxillofacial surgery department at Galilee Medical Center to evaluate his facial deformity in the upper jaw and treat his severe periodontal disease. The patient presented maxillary overgrowth, and severe dental deformity resulted in progressive disfigurement and difficulty chewing, swallowing, and speaking. To address the challenge of surgical treatment, we utilized the advantage of three-dimensional planning and printing technology to simulate the optimal result. Resection of maxillary bone overgrowth and insertion of custom-made subperiosteal implants were followed by rehabilitation of both jaws to the patients' satisfaction at 3-year follow-up. CONCLUSIONS: The ongoing implementation of state-of-the-art technologies such as virtual reality and three-dimensional printing has become a prominent component in surgical toolsets. Comprehensive case simulation and accurate planning before surgery will improve surgical results and patient satisfaction. This approach is highly advocated when approaching a case of rare maxillofacial deformity associated with either genetic or orphan diseases.

COVID-19 Vaccine Acceptance Among Dental Professionals Based on Employment Status During the Pandemic.

The COVID-19 pandemic spread rapidly across the globe, leading governments to impose prolonged lockdowns on both movement and commerce. Although lockdowns decrease the rates of novel infections, they can have devastating consequences on the economy and employment levels. One of the most severely affected sectors during this crisis has been dental medicine. Dental professionals are uniquely exposed to environments with high levels of occupational hazards, conferring additional risks of viral exposure and transmission. We analyzed 506 anonymous questionnaires completed by dentists and residents regarding acceptance of a future potential SARS-CoV-2 vaccine. Our results demonstrate a statistically significant correlation between the individual's unemployment rate and their willingness to inoculate with a SARS-CoV-2 vaccine when it becomes available. This information can be used to predict trends of vaccine acceptance or rejection based on economic burden during the COVID-19 pandemic by different sectors as part of the preparedness toward global vaccination programs.

The impact of delayed surgical intervention following high velocity maxillofacial injuries.

Our study compares the number of postoperative complications of Syrian patients admitted to the Galilee Medical Center (GMC) over a 5-year period (May 2013-May 2018) for treatment after initial high-velocity maxillofacial injuries sustained during the Syrian civil war. Specifically, we evaluated complication rates of patients arriving "early," within 24 h, to the GMC versus those who arrived "late," or 14-28 days following high-velocity maxillofacial injuries. Both groups of patients received definitive surgical treatment within 48 h of admission to our hospital with a total of 60 patients included in this study. The mean age was 26 ± 8 years (range: 9-50) and all except one were male. Postoperative complications in the early group were found to be significantly higher compared to the delayed arrival group (p = 0.006). We found that unintentionally delayed treatment may have contributed to a critical revascularization period resulting in improved healing and decreased postoperative morbidity and complications. We discuss potential mechanisms for complication rate variations, including critical vascularization periods. Our study may add to a growing body of work demonstrating the potential benefit of delayed surgical treatment for high-velocity maxillofacial injuries.

Forty-One Plant Extracts Screened for Dual Antidiabetic and Antioxidant Functions: Evaluating the Types of Correlation between -Amylase Inhibition and Free Radical Scavenging.

Dysregulation of glucose homeostasis followed by chronic hyperglycemia is a hallmark of diabetes mellitus (DM), a disease spreading as a worldwide pandemic for which there is no satisfactory dietary treatment or cure. The development of glucose-controlling drugs that can prevent complications of DM, such as hyperglycemia and oxidative stress, which contribute to the impairment of the key physiological processes in the body, is of grave importance. In pursuit of this goal, this study screened 41 plant extracts for their antidiabetic and antioxidant activities by employing assays to test for α-amylase inhibition and free radical scavenging activity (FRSA) and by measuring glucose uptake in L6-GLUT4myc cells. While extracts of Rhus coriaria, Punica granatum, Olea europaea, Pelargonium spp., Stevia rebaudiana, and Petroselinum crispum demonstrated significant α-amylase inhibition, the extracts of Rhus coriaria and Pelargonium spp. also demonstrated increased FRSA, and the extract of Rhus coriaria stimulated glucose uptake. These natural extracts, which are believed to have fewer side effects because they are prepared from edible plants, interfere with the process in the small intestine that breaks down dietary carbohydrates into monosaccharide and disaccharide derivatives, and thereby suppress increases in diet-induced blood glucose; hence, they may have clinical value for type 2 diabetes management. The Pelargonium spp. and Rhus coriaria extracts demonstrated the highest antidiabetic and antioxidant activities. Both plants may offer valuable medical benefits, especially because they can be taken as dietary supplements by patients with diabetes and can serve as sources of new, natural-based antidiabetic drug candidates. The enhancement of cellular glucose uptake stimulated by Rhus coriaria extract could lead to the development of clinical applications that regulate blood glucose levels from within the circulatory system. Isolating bioactive substances from these plant extracts and testing them in diabetic mice will significantly advance the development of natural drugs that have both antidiabetic and free radical-scavenging properties, likely with lesser side effects.

A Multichamber Gas System to Examine the Effect of Multiple Oxygen Conditions on Cell Culture.

The classic bone tissue engineering model for bone regeneration combines three elements: scaffolds, biomaterials, and mesenchymal stem cells (MSCs). Incorporation of MSCs and growth factors into a scaffold implanted into the area of bone injury is a proven strategy to achieve successful bone regeneration as demonstrated in the literature. However, a major limitation of using bone grafts or scaffolds is oxygen (O2) deprivation in the inner sections of the construct, due to lack of adequate vascularization. To address this limitation, we proposed two treatment strategies for MSC-seeded constructs or adipose tissue scaffolds before implantation: (1) O2 enrichment and (2) acclimation to hypoxia. Based on previous studies, the significance of the different O2 concentrations on MSC biological characteristics remains controversial. Therefore, the optimal O2 condition for engineered bone tissues should be determined. Thus, we designed an innovative multichamber gas system aimed to simultaneously assess the effects of different O2 levels on cell culture. This system was assembled using three isolated chambers integrated into a single incubator. To explore the efficacy of our method, we investigated the effect of hyperoxia, normoxia, and hypoxia, (50-60%, 21%, and 5-7.5% O2, respectively) on the biological characteristics of human adipose-derived MSCs: immunophenotyping, adhesion, proliferation, and osteogenic, and angiogenic differentiation. Our findings demonstrated that hypoxic adipose-derived mesenchymal stem cells (ASCs) conditions exhibited significantly lower levels of CD34 (p = 0.014), with significantly higher osteogenic and angiogenic differentiation capacities (p = 0.023 and p = 0.0042, respectively) than normoxia. Conversely, hyperoxia-cultured ASCs demonstrated significantly higher levels of CD73 and CD90 expression than both normoxic ASCs (p = 0.006 and p = 0.025, respectively) and hypoxic ASCs (p = 0.003 and p = 0.003, respectively). In addition, hyperoxic ASCs showed significantly reduced proliferation capacity by day 11 (p = 0.032) and significantly enhanced migration rates after 48 h (p = 0.044). The newly developed controllable multichamber gas system was cost-effective and easy to use. Different assays can be performed concurrently while preserving all other conditions identical, and the use of other ranges of O2 concentrations is feasible and also necessary to determine the ideal O2 concentration. Furthermore, the multichamber gas system has the potential for wide application, including other cell cultures, grafts, or scaffolds for in vitro and in vivo experimentation. This study was approved by the Galilee Medical Center Helsinki Committee (No. 0009-19-NHR). Impact statement The introduced multichamber gas system provides a custom-made setup for simultaneous control of three oxygen (O2) levels in a single incubator. The use of our innovative multichamber gas system is essential to determine the ideal O2 levels for engineered tissues by examining multiple O2 concentrations on cells in vitro. The determined ideal O2 concentration will then be used through this system to investigate the engrafted cell survival ex vivo, to ensure successful integration of the engineered tissues and tissue regeneration in vivo. Use of this method may promote a therapeutic tool for a major limitation in tissue engineering due to the problematic O2 insufficiency in tissue scaffolds.