RESUMEN
Non-equilibrium plasmas at atmospheric pressure are often characterized by optical emission spectroscopy. Despite the simplicity of recording optical emission spectra in plasmas, the determination of spatially resolved plasma properties (e.g., electron temperature) in an efficient way is very challenging. In this study, spatially resolved optical images of a microwave argon plasma jet expanding into the ambient air are recorded over a wide range of wavelengths using a hyperspectral imaging system based on a tunable Bragg-grating imager coupled to a scientific complementary metal-oxide-semiconductor camera. The system's working principle is detailed, along with the necessary post-processing steps. Further analysis of the spatial-spectral data, including the Abel transform used to determine 2D radially resolved spatial mappings, is also presented. Overall, the proposed approach provides unprecedented cartographies of key plasma parameters, such as argon and oxygen line emission intensities, Ar metastable number densities, and argon excitation temperatures. Considering that all these plasma parameters are obtained from measurements performed in a reasonable time, Bragg-grating-based hyperspectral imaging constitutes an advantageous plasma diagnostic technique for detailed analysis of microwave plasma jets used in several applications.
RESUMEN
Discharge in liquid is a promising technique to produce nanomaterials by electrode erosion. Although its feasibility was demonstrated in many conditions, the production of nanoalloys by in-liquid discharges remains a challenge. Here, we show that spark discharge in liquid cyclohexane that is in contact with conductive solution, made of a combination of Ni-nitrate and/or Fe-nitrate and/or Co-nitrate, is suitable to produce nanoalloys (<10 nm) of Ni-Fe, Ni-Co, Co-Fe, and Ni-Co-Fe. The nanoparticles are synthesized by the reduction of metal ions during discharge, and they are individually embedded in C-matrix; this latter originates from the decomposition of cyclohexane. The results open novel ways to produce a wide spectrum of nanoalloys; they are needed for many applications, such as in catalysis, plasmonic, and energy conversion.
RESUMEN
Water-repellent surfaces, often referred to as superhydrophobic surfaces, have found numerous potential applications in several industries. However, the synthesis of stable superhydrophobic surfaces through economical and practical processes remains a challenge. In the present work, we report on the development of an organosilicon-based superhydrophobic coating using an atmospheric-pressure plasma jet with an emphasis on precursor fragmentation dynamics as a function of power and precursor flow rate. The plasma jet is initially modified with a quartz tube to limit the diffusion of oxygen from the ambient air into the discharge zone. Then, superhydrophobic coatings are developed on a pre-treated microporous aluminum-6061 substrate through plasma polymerization of HMDSO in the confined atmospheric pressure plasma jet operating in nitrogen plasma. All surfaces presented here are superhydrophobic with a static contact angle higher than 150° and contact angle hysteresis lower than 6°. It is shown that increasing the plasma power leads to a higher oxide content in the coating, which can be correlated to higher precursor fragmentation, thus reducing the hydrophobic behavior of the surface. Furthermore, increasing the precursor flow rate led to higher deposition and lower precursor fragmentation, leading to a more organic coating compared to other cases.
