Defect-related multicolour emissions in ZnO smoke: from violet, over green to yellow.

The nature of defects in ZnO smoke was studied at different stages of the material's history by combining photoluminescence (PL) and electron paramagnetic resonance (EPR) spectroscopy. In contrast to studies previously reported on ZnO nanopowders, high vacuum conditions (P < 10-5 mbar) have been applied during sample storage, handling and spectroscopic investigations. Two pairs of violet-PL/EPR signals (2.88 eV/ g = 1.956 and 2.80 eV/ g = 1.960) were observed in the as-synthesized ZnO powder and attributed to surface (dominant) and bulk zinc interstitials (Zni+). Upon annealing in O2-poor conditions, green-PL emission (2.41 eV) and EPR signal at g = 2.002 develop along with EPR signals specific of superoxide radicals (O2-). In the absence of any external O2 supply, the oxygen necessary for the creation of a notable amount of O2- is provided by the lattice of ZnO smoke, so that the green emission and its EPR counterpart are unambiguously assigned to singly charged oxygen vacancies (VO+). Annealing at high PO2 results in a broad PL emission (∼2.07 eV) without an EPR counterpart. This yellow emission was assigned to peroxide-like surface species (O22-). Overall, this study shows that the visible emissions in ZnO smoke nanopowders can range from violet, over green to yellow as a function of sample history and that the corresponding PL/EPR fingerprints can serve as guidelines for the recognition of defects in other ZnO types.

Exploring multiple effects of Zn0.15Mg0.85O nanoparticles on Bacillus subtilis and macrophages.

The increasing number of multidrug resistant bacteria raises a serious public-health concern, which is exacerbated by the lack of new antibiotics. Metal oxide nanoparticles are already applied as an antibacterial additive in various products used in everyday life but their modes of action have remained unclear. Moreover, their potential negative effects to human health are still under evaluation. We explored effects of mixed metal oxide Zn0.15Mg0.85O on Bacillus subtilis, as a model bacterial organism, and on murine macrophages. Zn0.15Mg0.85O killed planktonic bacterial cells and prevented biofilm formation by causing membrane damages, oxidative stress and metal ions release. When exposed to a sub-inhibitory amount of Zn0.15Mg0.85O, B. subtilis up-regulates proteins involved in metal ions export, oxidative stress response and maintain of redox homeostasis. Moreover, expression profiles of proteins associated with information processing, metabolism, cell envelope and cell division were prominently changed. Multimode of action of Zn0.15Mg0.85O suggests that no single strategy may provide bacterial resistance. Macrophages tolerated Zn0.15Mg0.85O to some extend by both the primary phagocytosis of nanoparticles and the secondary phagocytosis of damaged cells. Bacterial co-treatment with ciprofloxacin and non-toxic amount of Zn0.15Mg0.85O increased antibiotic activity towards B. subtilis and E. coli.

ZnO powders as multi-facet single crystals.

Oxides are most commonly found in divided forms with properties difficult to control since their crystallographic orientations usually escape analysis. To overcome this an appropriate model system can be provided by ZnO smoke which, obtained by combustion of Zn in air, exhibits nanoparticles with well-defined surface facets. The present work focuses on the interaction of water with ZnO smokes by combining density functional theory based simulations and infrared spectroscopy measurements with applied pressures from 10-7 to 1 mbar. We demonstrate that the use of ultra-high vacuum allows the analysis of the very first stages of the adsorption, and report on water structures on ZnO(112[combining macron]0) for the first time. We further show that ZnO powders behave as multi-facet single crystals involving (101[combining macron]0), (112[combining macron]0), (0001), and (0001[combining macron]) surfaces with the polar orientations corresponding to 25% of the total surface area. A great deal of cross-agreements between experimental results and simulation provides a simple approach for the examination of hydroxylated/hydrated ZnO smokes and can be widely applied on other ZnO-related powders.

Pure and multi metal oxide nanoparticles: synthesis, antibacterial and cytotoxic properties.

Th antibacterial activity of metal oxide nanoparticles has received marked global attention as they can be specifically synthesized to exhibit significant toxicity to bacteria. The importance of their application as antibacterial agents is evident keeping in mind the limited range and effectiveness of antibiotics, on one hand, and the plethora of metal oxides, on the other, along with the propensity of nanoparticles to induce resistance being much lower than that of antibiotics. Effective inhibition against a wide range of bacteria is well known for several nano oxides consisting of one metal (Fe3O4, TiO2, CuO, ZnO), whereas, research in the field of multi-metal oxides still demands extensive exploration. This is understandable given that the relationship between physicochemical properties and biological activity seems to be complex and difficult to generalize even for metal oxide nanoparticles consisting of only one metal component. Also, despite the broad scope that metal oxide nanoparticles have as antibacterial agents, there arise problems in practical applications taking into account the cytotoxic effects. In this respect, the consideration of polymetallic oxides for biological applications becomes even greater since these can provide synergetic effects and unify the best physicochemical properties of their components. For instance, strong antibacterial efficiency specific of one metal oxide can be complemented by non-cytotoxicity of another. This review presents the main methods and technological advances in fabrication of nanostructured metal oxides with a particular emphasis to multi-metal oxide nanoparticles, their antibacterial effects and cytotoxicity.

Size effects in MgO cube dissolution.

Stability parameters and dissolution behavior of engineered nanomaterials in aqueous systems are critical to assess their functionality and fate under environmental conditions. Using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction, we investigated the stability of cubic MgO particles in water. MgO dissolution proceeding via water dissociation at the oxide surface, disintegration of Mg(2+)-O(2-) surface elements, and their subsequent solvation ultimately leads to precipitation of Mg(OH)2 nanosheets. At a pH ≥ 10, MgO nanocubes with a size distribution below 10 nm quantitatively dissolve within few minutes and convert into Mg(OH)2 nanosheets. This effect is different from MgO cubes originating from magnesium combustion in air. With a size distribution in the range 10 nm ≤ d ≤ 1000 nm they dissolve with a significantly smaller dissolution rate in water. On these particles water induced etching generates (110) faces which, above a certain face area, dissolve at a rate equal to that of (100) planes.1 The delayed solubility of microcrystalline MgO is attributed to surface hydroxide induced self-inhibition effects occurring at the (100) and (110) microplanes. The present work underlines the importance of morphology evolution and surface faceting of engineered nanomaterials particles during their dissolution.

Effects of water and cell culture media on the physicochemical properties of ZnMgO nanoparticles and their toxicity toward mammalian cells.

ZnMgO nanoparticles have shown potential for medical applications as an efficient antibacterial agent. In this work, we investigate the effect of water and two commonly used cell culture media on the physicochemical properties of ZnMgO nanoparticles in correlation with their cytotoxicity. In vacuum, ZnMgO nanopowder consists of MgO (nanocubes) and ZnO (nanotetrapods and nanorods) particles. Upon exposure to water or the Luria-Bertani solution, ZnO characteristic shapes were not observable while MgO nanocubes transformed into octahedral form. In addition, water caused morphological alternations in form of disordered and fragmented structures. This effect was directly reflected in UV/vis absorption properties of ZnMgO, implying that formation of new states within the band gap of ZnO and redistribution of specific sites on MgO surfaces occurs in the presence of water. In mammalian culture cell medium, ZnMgO nanoparticles were shapeless, agglomerated, and coated with surrounding proteins. Serum albumin was found to adsorb as a major but not the only protein. Adsorbed albumin mainly preserved its α-helix secondary structure. Finally, the cytotoxicity of ZnMgO was shown to strongly depend on the environment: in the presence of serum proteins ZnMgO nanopowder was found to be safe for mammalian cells while highly toxic in a serum-free medium or a medium containing only albumin. Our results demonstrate that nanostructured ZnMgO reaches living cells with modified morphology and surface structure when compared to as-synthesized particles kept in vacuum. In addition, its biocompatibility can be modulated by proteins from biological environment.

Selective antibacterial effects of mixed ZnMgO nanoparticles.

Antibiotic resistance has impelled the research for new agents that can inhibit bacterial growth without showing cytotoxic effects on humans and other species. We describe the synthesis and physicochemical characterization of nanostructured ZnMgO whose antibacterial activity was compared to its pure nano-ZnO and nano-MgO counterparts. Among the three oxides, ZnO nanocrystals-with the length of tetrapod legs about 100 nm and the diameter about 10 nm-were found to be the most effective antibacterial agents since both Gram-positive (B. subtilis) and Gram-negative (E. coli) bacteria were completely eradicated at concentration of 1 mg/mL. MgO nanocubes (the mean cube size ~50 nm) only partially inhibited bacterial growth, whereas ZnMgO nanoparticles (sizes corresponding to pure particles) revealed high specific antibacterial activity to Gram-positive bacteria at this concentration. Transmission electron microscopy analysis showed that B. subtilis cells were damaged after contact with nano-ZnMgO, causing cell contents to leak out. Our preliminary toxicological study pointed out that nano-ZnO is toxic when applied to human HeLa cells, while nano-MgO and the mixed oxide did not induce any cell damage. Overall, our results suggested that nanostructured ZnMgO, may reconcile efficient antibacterial efficiency while being a safe new therapeutic for bacterial infections.

Equilibrium shapes of supported silver clusters.

The morphology of silver nanoparticles supported on MgO smoke crystallites was studied by combining Transmission Electron Microscopy (TEM) and atomistic simulations of clusters of realistic size. Advantage was taken of the occurrence of well-defined complex MgO surfaces, including stepped surfaces and contact lines between stacked crystallites, to analyze Ag clusters of various orientations. Silver clusters were seen to adopt systematically the shape of a truncated octahedron irrespective of the support morphology. The (100)Ag//(100)MgO epitaxy was evidenced and (100), (111) and (110) facets were identified. The agreement between observed shapes and simulated profiles demonstrated that the formers were close to equilibrium which allowed the use of Wulff-Kaishew construction to determine the anisotropy ratios γ100/γ111 (1.03 ± 0.03) and γ110/γ111 (1.08 ± 0.03) and the Ag(100)/MgO(100) adhesion energy (0.58 ± 0.10 J m(-2)) for clusters large enough to escape stress effects.

Surface exciton separation in photoexcited MgO nanocube powders.

In MgO nanocube powders surface excitons can separate and the resulting charge carriers provide reactive adsorption sites at well-defined surface elements. We employed photoluminescence (PL) emission bands originating from the photoexcitation of nanocube corners and edges as quantitative probes to explore their chemical reactivity towards molecular hydrogen. Surface excitons which form at corners and edges exhibit similar cross-sections for separation in vacuum. The separation of edge excitons, however, is significantly enhanced in hydrogen atmosphere when hydrogen adsorption occurs as a simultaneous surface process. The electronic structure of MgO nanocube edges which split hydrogen heterolytically upon generation of surface hydroxyls and hydrides is unaffected by the photoexcitation of corners. Respective edges, however, are efficient absorption sites for UV photons. Transfer of exciton energy to oxygen ions in corners is followed by exciton separation which transforms corner ions into surface radicals leading to a well-defined starting point for the site selective functionalization of metal oxide nanostructures.

Zinc oxide scaffolds on MgO nanocubes.

Powders of isolated and well-dispersed oxide nanocubes are promising components for photoelectronic applications that benefit from tunable optical properties, surface reactivity and the ease of realization of their controlled assembly. Here, we demonstrate that combustion of zinc and magnesium metal vapors at reduced pressures followed by subsequent vacuum annealing of the resulting nanoparticle powders yields single-crystalline Zn(x)Mg(1-x)O nanocubes of exceptional regular cubic shape and edge lengths below 25 nm. In line with ab initio calculations, which predict preferential Zn(2+) segregation into low coordinated surface elements of the MgO nanocubes, we track the occupation of edge sites by chains of Zn(2+)-O(2-) units through their spectroscopic signatures. As a method to generate composite nanostructures with controlled spatial distribution of the chemical components, the annealing induced ion segregation can be extended to other well-dispersed metastable nanoparticles. We expect that the energy of segregation mainly depends on the site coordination number, which can promote controlled demixing within the nanoparticles.

Effect of protons on the optical properties of oxide nanostructures.

Site-specific functionalization of oxide nanostructures gives rise to novel optical and chemical surface properties. In addition, it can provide deeper insights into the electronic surface structure of the associated materials. We applied chemisorption of molecular hydrogen, induced by ultraviolet (UV) light, followed by vacuum annealing to MgO nanocubes to selectively decorate three-coordinated oxygen ions (oxygen corner sites, for simplicity) with protons. Fully dehydroxylated nanocubes exhibit 3.2 +/- 0.1 eV photoluminescence induced by 4.6 eV light, where both emission and absorption are associated with three-coordinated oxygen sites. We find that partially hydroxylated nanocubes show an additional photoluminescence feature at 2.9 +/- 0.1 eV. Interestingly, the excitation spectra of the 2.9 and 3.2 eV emission bands, associated with protonated and nonprotonated oxygen corner sites, respectively, nearly coincide and show well-pronounced maxima at 4.6 eV in spite of a significant difference in their local atomic and electronic structures. These observations are explained with the help of ab initio calculations, which reveal that (i) the absorption band at 4.6 eV involves four-coordinated O and Mg ions in the immediate vicinity of the corner sites and (ii) protonation of the three-coordinated oxygen ions eliminates the optical transitions associated with them and strongly red-shifts other optical transitions associated with neighboring atoms. These results demonstrate that the optical absorption bands assigned to topological surface defects are not simply determined by the ions of lowest coordination number but involve contributions due to the neighboring atoms of higher coordination. Thus, we suggest that the absorption band at 4.6 eV should not be regarded as merely a signature of the three-coordinated O2- ions but ought to be assigned to corners as multiatomic topological features. Our results also suggest that optical absorption signatures of protonated and nonprotonated sites of oxide surfaces can be remarkably similar.

Optical surface properties and morphology of MgO and CaO nanocrystals.

Optical absorption and photoluminescence emission properties of dehydroxylated MgO and CaO nanocrystals are discussed with respect to particle morphology and size. On MgO nanocubes with pronounced corner and edge features two emission bands at 3.4 and 3.3 eV result from the excitation of 4-coordinated surface O(4C)(2-) anions in edges at 5.4 eV and of regular oxygen-terminated corners at 4.6 eV, respectively. Morphologically ill-defined CaO particles are a factor of 5 larger, do not display regular corner features, and show only one photoluminescence emission band at 3.0 eV. The associated excitation spectrum indicates electronic excitations above the energy required to excite regular oxygen-terminated CaO corners. It is concluded that in the case of morphologically well-defined MgO nanocubes variations in the next coordination of oxygen-terminated corners can effectively be probed by photoluminescence spectroscopy and thus allows for discrimination between 3-coordinated surface O(2-) in regular corner sites and kinks.

Novel optical surface properties of Ca2+ -doped MgO nanocrystals.

Surface doping of oxide nanoparticles is important in fields ranging from heterogeneous catalysis to optoelectronics. Here, we report the solvent-free synthesis of mixed calcium-magnesium oxide nanocrystals in the size range between 5 and 40 nm. Although CaMgO mixtures are thermodynamically forbidden on a macroscopic scale, Calcium ions can be distributed homogeneously in MgO using chemical vapor deposition (CVD) as a nonequilibrium technique. Subsequent thermal activation leads to calcium ion segregation into the nanocrystal surface which, in addition to the synthesis parameters, provides efficient means for manipulating the optical surface properties of insulating oxide nanocrystals. A novel material with unexpected photonic behavior, such as enhanced photoluminescence emission which is also red-shifted with respect to those of CaO and MgO, was found.

Spectroscopic properties of trapped electrons on the surface of MgO nanoparticles.

To characterise electron-trapping sites on the surface of MgO nanoparticles, surface colour centres were generated using UV light in conjunction with selected hydrogen-based electron sources. Four different colour-centre species, including the characteristic (e-)(H+) or F(S)+(H) centre, were identified due to the distinct shape of the respective electron paramagnetic resonance (EPR) signals. The analysis of the EPR saturation behaviour down to microwave powers of 5 x 10(-3) mW reveals an enhanced spin-relaxation probability of the (e-)(H+) centre compared to all other F(S)+ centres that do not exhibit significant magnetic interactions with hydroxylic protons. Beside the dipolar magnetic interaction in the (e-)(H+) centre observed by EPR, the electronic interaction between the unpaired electron and the proton of a closely spaced OH group produces a redshift of the OH stretching band by about 70 to 170 cm(-1), as observed by infrared spectroscopy. EPR and IR spectroscopic data obtained after the selective address of individual reaction channels for surface colour-centre formation point to the fact that (e-)(H+) centres are formed by trapping electrons from H atoms. Consequently, the underlying surface defect does not belong to the sites of the MgO surface, which chemisorb hydrogen via a heterolytic splitting process.