Copper oxide(I) nanoparticle-modified cellulose acetate membranes with enhanced antibacterial and antifouling properties.

Cellulose acetate membranes exhibit a potential to be applied in hemodialysis. However, their performance is limited by membrane fouling and a lack of antibacterial properties. In this research, copper oxide (I) nanoparticles were fabricated in situ into a cellulose acetate matrix in the presence of polyvinylpyrrolidone (pore-forming agent) and sulfobetaine (stabilising agent) to reduce the leakage of copper ions from nano-enhanced membranes. The influence of nanoparticles on the membrane structure and their antibacterial and antifouling properties were investigated. The results showed that incorporating Cu2O NPs imparted significant antibacterial properties against Staphylococcus aureus and fouling resistance under physiological conditions. The Cu2O NPs-modified membrane could pave the way for potential dialysis applications.

Advancing oral health: Harnessing the potential of chitosan and polyphenols in innovative mouthwash formulation.

This paper explores the therapeutic perspectives of polyphenols and chitosan as potential anticancer agents in the mouthwash formulations. Taking into account the high incidence of squamous cell carcinoma (SCC) among oral cancers, this discussion will concentrate on the potential advantages of these compounds in oral care, focusing on their impact on improving oral health and cancer prevention. According to the data, it appears that the mixture of BACs extract and chitosan may increase the efficiency of the apoptosis of cancer cells while reducing the undesired side effects. The cytotoxicity assays demonstrate a significant reduction in squamous carcinoma cell viability after incubation with BACs extract, with a marked decrease observed over 24-72 hours up to 76%. The anti-cancer properties of the BAC extract are related to luteolin, which is a predominant compound. The addition of 0.025% chitosan reduced the metabolic activity of cancer cells by 37.5%, suggesting a synergistic interaction between the compounds. This research highlights the potential of BACs and chitosan in modulating important molecular targets associated with cancer cell.

Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology.

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.4%), Pb (up to 95%), Cr (up to 99.9%), Zn (up to 99%), Ni (up to 93.8%), and As (up to 92.9%) from wastewater and industrial effluents. In addition, the issue of biosorbent deactivation and failure over time is highlighted as it is crucial for the successful implementation of adsorption in practical applications. Such phenomena as blockage by other cations or chemical decomposition are reported, and chemical, thermal, and microwave treatments are indicated as effective regeneration techniques. Ongoing research should focus on the development of more resilient biosorbent materials, optimizing regeneration techniques, and exploring innovative approaches to improve the long-term performance and sustainability of biosorption technologies. The analysis showed that biosorption emerges as a promising strategy for alleviating pollutants in wastewater and industrial effluents, offering a sustainable and environmentally friendly approach to addressing water pollution challenges.

Microplastic label in microencapsulation field - Consequence of shell material selection.

Plastics make our lives easier in many ways; however, if they are not appropriately disposed of or recycled, they may end up in the environment where they stay for centuries and degrade into smaller and smaller pieces, called microplastics. Each year, approximately 42000 tonnes of microplastics end up in the environment when products containing them are used. According to the European Chemicals Agency (ECHA) one of the significant sources of microplastics are microcapsules formulated in home care and consumer care products. As part of the EU's plastics strategy, ECHA has proposed new regulations to ban intentionally added microplastics starting from 2022. It means that the current cross-linked microcapsules widely applied in consumer goods must be transformed into biodegradable shell capsules. The aim of this review is to provide the readers with a comprehensive and in-depth understanding of recent developments in the art of microencapsulation. Thus, considering the chemical structure of the capsule shell's materials, we discuss whether microcapsules should also be categorized as microplastic and therefore, feared and avoided or whether they should be used despite the persisting concern.

The Pragmatism of Polyphenols and Flavonoids Application as Drugs, from an Academic Lab to a Pharmacy Shelf.

Polyphenols and flavonoids, naturally occurring compounds found abundantly in plants, have gained considerable attention in recent years due to their potential health benefits. Research exploring their bioactive properties has revealed promising therapeutic applications in various diseases. This article aims to provide a comprehensive overview of the intricate journey from academic laboratory discoveries to the availability of polyphenols and flavonoids as drugs on pharmacy shelves. It was shown that the transformation of these natural compounds into effective therapies is a promising avenue for enhancing human health. Yet, fully realizing this potential necessitates sustained scientific exploration, cross-disciplinary collaboration, and continued investment in research and development. This article underscores the importance of sustained collaboration and investment as key pillars of progress towards innovative and effective therapies.

A critical review of dental biomaterials with an emphasis on biocompatibility.

This paper presents the major achievements in the field of biomaterials in restorative dentistry and tissue regeneration reported over the past 3 years. The review aims to summarize the knowledge on important biomaterials and the emerging modification strategies to improve their biointegration, biological activity, mechanical properties, and resistance to the harsh oral environment. We also discuss the main opportunities and challenges associated with the use of biomaterials in dentistry.Much contemporary research focuses on the interactions between biomaterials and the surrounding tissues in the oral environment regarding adhesion, associated stresses and strains, and the durability of dental restoration materials. Dental biomaterials should support cell adhesion and activity, leading to dental tissue regeneration, and are also expected to effectively prevent bacterial infections and inhibit material corrosion in saliva. The degradation, dissolution or corrosion of restorative materials due to exposure to body fluids can alter the structure and mechanical properties of the material, causing various adverse effects.Another aspect addressed in recent literature is the improvement of the mechanical properties and esthetics of restorative materials. The surfaces of biomaterials are usually modified with polymers or nanomaterials to reduce friction while maintaining biocompatibility.Although all modern biomaterials are promising, there is an urgent need for more in vivo and clinical studies to investigate their biological advantages and disadvantages in detail. The computational techniques used to assess the properties of modern dental materials, particularly the mechanical ones, could assist in the development of the materials. Such an approach can help bring new biomaterials to the market by reducing complicated, tedious and expensive experimentation.

Copper and Copper-Based Nanoparticles in Medicine-Perspectives and Challenges.

Nanotechnology has ushered in a new era of medical innovation, offering unique solutions to longstanding healthcare challenges. Among nanomaterials, copper and copper oxide nanoparticles stand out as promising candidates for a multitude of medical applications. This article aims to provide contemporary insights into the perspectives and challenges regarding the use of copper and copper oxide nanoparticles in medicine. It summarises the biomedical potential of copper-based nanoformulations, including the progress of early-stage research, to evaluate and mitigate the potential toxicity of copper nanomaterials. The discussion covers the challenges and prospects of copper-based nanomaterials in the context of their successful clinical translation. The article also addresses safety concerns, emphasizing the need for toxicity assessments of nanomedicines. However, attention is needed to solve the current challenges such as biocompatibility and controlled release. Ongoing research and collaborative efforts to overcome these obstacles are discussed. This analysis aims to provide guidance for the safe and effective integration of copper nanoparticles into clinical practice, thereby advancing their medical applications. This analysis of recent literature has highlighted the multifaceted challenges and prospects associated with copper-based nanomaterials in the context of their translation from the laboratory to the clinic. In particular, biocompatibility remains a formidable hurdle, requiring innovative solutions to ensure the seamless integration into the human body. Additionally, achieving the controlled release of therapeutic agents from copper nanoparticles poses a complex challenge that requires meticulous engineering and precise design.

From Data to Diagnosis: How Machine Learning Is Changing Heart Health Monitoring.

The rapid advances in science and technology in the field of artificial neural networks have led to noticeable interest in the application of this technology in medicine. Given the need to develop medical sensors that monitor vital signs to meet both people's needs in real life and in clinical research, the use of computer-based techniques should be considered. This paper describes the latest progress in heart rate sensors empowered by machine learning methods. The paper is based on a review of the literature and patents from recent years, and is reported according to the PRISMA 2020 statement. The most important challenges and prospects in this field are presented. Key applications of machine learning are discussed in medical sensors used for medical diagnostics in the area of data collection, processing, and interpretation of results. Although current solutions are not yet able to operate independently, especially in the diagnostic context, it is likely that medical sensors will be further developed using advanced artificial intelligence methods.

Recovery of Metals from Wastewater-State-of-the-Art Solutions with the Support of Membrane Technology.

This paper discusses the most important research trends in the recovery of metals from industrial wastewater using membrane techniques in recent years. Particular attention is paid to the preparation of new membranes with the required filtration and separation properties. At the same time, possible future applications are highlighted. The aspects discussed are divided into metals in order to clearly and comprehensibly list the most optimal solutions depending on the composition of the wastewater and the possibility of recovering valuable components (metalloids, heavy metals, and platinum group metals). It is shown that it is possible to effectively remove metals from industrial wastewater by appropriate membrane preparation (up to ~100%), including the incorporation of functional groups, nanoparticles on the membrane surface. However, it is also worth noting the development of hybrid techniques, in which membrane techniques are one of the elements of an effective purification procedure.

Chromium(III) Removal from Nickel(II)-Containing Waste Solutions as a Pretreatment Step in a Hydrometallurgical Process.

This paper presents Cr(III) removal from nickel sulfate waste solutions as a pretreatment step for the modification of hydrogen storage alloys. Adsorption with two cation exchange resins, Dowex G26 (strongly acidic) and MAC-3 (weakly acidic), and precipitation with various solutions were chosen as simple operations for Cr(III) removal from waste solutions. The adsorption of Cr(III) was investigated for both model and real waste nickel solutions. Dowex G26 appeared to be more efficient in Cr(III) removal (RCr(III) from 43 to 80%) than MAC-3 (RCr(III) from 40 to 53%). However, the adsorption from multi-component solutions (presence of Co(II), Ni(II) and Cr(III)) showed no selectivity in Cr(III) adsorption in comparison to those of Co(II) and Ni(II). Cr(III), Ni(II) and Co(II) were removed at a comparable level (30-36%) from a three-component solution of 10 g/dm3 of each metal ion, and a 56-72% removal of these ions was achieved from the real solution. Therefore, the precipitation of Cr(III) was carried out from a real waste nickel solution to compare its performance with adsorption. The best precipitation solution appeared to be 3 and 30% NaOH due to the quantitative precipitation of Cr(OH)3 at pH 5 and relatively small co-precipitation of Ni(II) and Co(II) hydroxides (PCo(II) = 20-52%, PNi(II) = 0-54%). Based on the results of the research, it can be concluded that precipitation with a NaOH solution is an efficient pretreatment operation of an electrolyte for further steps of the hydrometallurgical process of nickel electrodeposition and appears to be more selective in the elimination of Cr(III) than adsorption with Dowex G26 resin.

Removal of Copper(II) in the Presence of Sodium Dodecylobenzene Sulfonate from Acidic Effluents Using Adsorption on Ion Exchangers and Micellar-Enhanced Ultrafiltration Methods.

The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the systems containing Cu(II) in the presence of ABSNa50 surfactant compared to the other adsorbents (removal efficiency ≈ 100%, sorption capacity ≈ 10 mg/g). The kinetics followed the pseudo-second order kinetic equation. The Langmuir adsorption capacities were 110 mg/g (the system with ABSNa50 above CMC) and 130.38 mg/g (the system with ABSNa50 below CMC). The working ion exchange capacities were Cw = 0.0216 g/mL and Cw = 0.0135 g/mL. The copper removal by the micellar-enhanced ultrafiltration method was 76.46% (0.1 mol/L HCl).

Advances in the Removal of Cr(III) from Spent Industrial Effluents-A Review.

The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions. Very often the first step in dealing with such wastewater is the reduction in chromium content. In some cases, removal of Cr(III) from wastewaters is an important step for pretreatment of solutions to prepare them for subsequent recovery of other metals. In the review, hydrometallurgical operations for Cr(III) removal are presented, including examples of Cr(III) recovery from real industrial effluents with precipitation, adsorption, ion exchange, extraction, membrane techniques, microbial-enhanced techniques, electrochemical methods. The advantages and disadvantages of the operations mentioned are also presented. Finally, perspectives for the future in line with circular economy and low-environmental impact are briefly discussed.

Achievement in active agent structures as a power tools in tumor angiogenesis imaging.

According to World Health Organization (WHO) cancer is the second most important cause of death globally. Because angiogenesis is considered as an essential process of growth, proliferation and tumor progression, within this review we decided to shade light on recent development of chemical compounds which play a significant role in its imaging and monitoring. Indeed, the review gives insight about the current achievements of active agents structures involved in imaging techniques such as: positron emission computed tomography (PET), magnetic resonance imaging (MRI) and single photon emission computed tomography (SPECT), as well as combination PET/MRI and PET/CT. The review aims to provide the journal audience with a comprehensive and in-deep understanding of chemistry policy in tumor angiogenesis imaging.

Milestones and current achievements in development of multifunctional bioscaffolds for medical application.

Tissue engineering (TE) is a rapidly growing interdisciplinary field, which aims to restore or improve lost tissue function. Despite that TE was introduced more than 20 years ago, innovative and more sophisticated trends and technologies point to new challenges and development. Current challenges involve the demand for multifunctional bioscaffolds which can stimulate tissue regrowth by biochemical curves, biomimetic patterns, active agents and proper cell types. For those purposes especially promising are carefully chosen primary cells or stem cells due to its high proliferative and differentiation potential. This review summarized a variety of recently reported advanced bioscaffolds which present new functions by combining polymers, nanomaterials, bioactive agents and cells depending on its desired application. In particular necessity of study biomaterial-cell interactions with in vitro cell culture models, and studies using animals with in vivo systems were discuss to permit the analysis of full material biocompatibility. Although these bioscaffolds have shown a significant therapeutic effect in nervous, cardiovascular and muscle, tissue engineering, there are still many remaining unsolved challenges for scaffolds improvement.

Anatomical and Clinical Implications in Neocondyle Stability After a Condylectomy.

: A condylectomy of the mandibular condyle is considered to be the treatment of choice in most cases of condylar head hyperactivity. The aim of the procedure is to remove the growth center of the mandible which is responsible for the mandibular enlargement and asymmetry. This surgical procedure has an impact on the condyle shape and position, but the restoration of mandibular movement and a stable joint position (namely, the proper alignment of the newly shaped condylar head within the condyle fossa) should also be considered important surgical outcomes. In this article, the authors present their own experience in performing condylectomies with an arthroplasty procedure and a special forced suturing technique (FST) in terms of achieving early, accurate mandibular movement and maintaining a stable condyle position in early and late outcomes. MATERIALS AND METHODS: A modified high condylectomy with arthroplasty and FST results had been studied in anatomical, radiological, and clinical model. RESULTS: Early findings after FST are promising. A slight improvement in lateral jaw movement was noted after condylectomy with arthroplasty (P < 0.05) both in early and late follow-up. Incisal opening, mandibular protrusion, and lateral movement were sustained. A stable condyle position within the fossa was achieved in each case of condylectomy with arthroplasty (P < 0.05). CONCLUSIONS: The FST condylectomy and reattachment of the lateral pterygoid muscle in a new, wider position provided an improvement in lateral jaw movement as well as in incisal opening and mandibular protrusion in early follow-up examination compared to the presurgical values. It seems that the FST enabled a better new condylar head position in the glenoid fossa and improved early functional mandibular movement.

Synthesis, Surface and Antimicrobial Activity of New Lactose-Based Surfactants.

This work presents a synthesis method for new surfactants based on lactose. The compounds obtained belong to the homologous series of O-ß-D-Galactopyranosyl-(1→4)-N-alkyl-(3-sulfopropyl)-D-glucosamine hydrochloride, containing 12 and 14 carbon atoms in the alkyl chain, and they may serve as an example of cationic surfactants. The newly synthesized compounds exhibit good surface properties, low value of CMC (Critical Micelle Concentration) and good wetting properties. These surfactants' ability to produce foam is considerably higher than in the commercial surfactants. Moreover, antibacterial and fungistatic activity was carried out by well diffusion assay against the selected bacteria (Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa), yeasts (Candida albicans) and filamentous fungi (Fusarium graminearum, F. avenaceum, F. oxysporum, F. culmorum, F. equiseti, Alternaria alternata and Botrytis cinerea). It was shown that the resulting quaternary salts significantly inhibit the growth of tested microorganisms. Antibacterial and fungistatic activity of the surfactant compounds varied depending on the species of bacteria or fungi. The results of antimicrobial activity of new lactose derivatives indicate that the compounds exhibit larger or similar antagonistic activity against tested bacteria and fungi than typical cationic surfactant cetylpyridinium chloride.

Synthesis, Surface and Antimicrobial Activity of Piperidine-Based Sulfobetaines.

A new method for the preparation of new heterocyclic amine surfactants based on sulfobetaines is proposed. Interfacial activities of the surfactants obtained in aqueous solution were studied by surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule, and standard Gibbs energy of adsorption were determined. The adsorption properties of these compounds depend significantly on the alkyl chain length. Alkyl chain length also affects biological properties of the new surfactants, determining the minimum inhibitory concentration and size of inhibited growth zone. The compounds have high antimicrobial activity.

Facile Synthesis of Sulfobetaine-Stabilized Cu2O Nanoparticles and Their Biomedical Potential.

A novel approach using a zwitterionic sulfobetaine-based surfactant for the synthesis of spherical copper oxide nanoparticles (Cu2O NPs) has been applied. For the first time, N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate has been used as stabilizer to control the size and morphology of Cu2O NPs. Several techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), and fluorescence spectroscopy, are used to investigate the size, structure, and optical properties of synthesized Cu2O nanocrystals. The results indicate that copper(I) oxide nanoparticles with size in the range of 2 to 45 nm and crystalline structure, exhibit intense yellow fluorescence (λem = 575 nm). Furthermore, the cytotoxicity studies show that sulfobetaine-stabilized copper oxide nanoparticles prompt inhibition of cancer cell proliferation in a concentration-dependent manner, however, the adverse effect on the normal cells has also been observed. The results indicate that the sulfobetaine-stabilized Cu2O, because of their unique properties, have a potential to be applied in medical fields, such as cancer therapy and bioimaging.

Synthesis and Interfacial Activity of Novel Heterogemini Sulfobetaines in Aqueous Solution.

Three new heterogemini sulfobetaines and their chloride salts were synthesised. The interfacial activities of the obtained chlorides in aqueous solution were studied by equilibrium and dynamic surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule and standard Gibbs energy of adsorption as well as micelle lifetime and diffusion coefficient were determined. The adsorption properties and micelle lifetime of these compounds significantly depend on the length of alkyl chain. The critical micelle concentration decreases with increasing chain length of the compounds considered. The values of the diffusion coefficient of N-alkyl-N-methyl-N-(3-sulfopropyl)-6-(N-alkyl-N-methylamino)hexylammonium chloride tend to decrease as the concentration is increased.

Effect of Sodium Chloride on the Surface and Wetting Properties of Aqueous Solutions of Cocamidopropyl Betaine.

Surfactants are important ingredients of personal care products and household products. The main characteristic of these compounds is to decrease the surface tension of solvent and resulting many properties such as contact angle, foam properties etc. The coexistence of other ingredients in the product may affect the properties of surfactants. One of the main components contained in almost every personal care and household product is sodium chloride. The main aim of this work was to determine the effect of this salt on some surface and usage properties of cocamidopropyl betaine (CAPB). From our experiments it was shown that the effect of added sodium chloride in the aqueous solutions of CAPB on the properties is the opposite to the one described in the literature for cationic and anionic surfactants, i.e., CMC increases with increasing ionic strength, foam height decreases with increasing salt concentration. Our investigation showed that sodium chloride makes worse the properties of the CAPB solutions examined in this work.