Single-molecule analysis reveals that regulatory light chains fine-tune skeletal myosin II function.

Myosin II is the main force-generating motor during muscle contraction. Myosin II exists as different isoforms that are involved in diverse physiological functions. One outstanding question is whether the myosin heavy chain (MHC) isoforms alone account for these distinct physiological properties. Unique sets of essential and regulatory light chains (RLCs) are known to assemble with specific MHCs, raising the intriguing possibility that light chains contribute to specialized myosin functions. Here, we asked whether different RLCs contribute to this functional diversification. To this end, we generated chimeric motors by reconstituting the MHC fast isoform (MyHC-IId) and slow isoform (MHC-I) with different light-chain variants. As a result of the RLC swapping, actin filament sliding velocity increased by ∼10-fold for the slow myosin and decreased by >3-fold for the fast myosin. Results from ensemble molecule solution kinetics and single-molecule optical trapping measurements provided in-depth insights into altered chemo-mechanical properties of the myosin motors that affect the sliding speed. Notably, we found that the mechanical output of both slow and fast myosins is sensitive to the RLC isoform. We therefore propose that RLCs are crucial for fine-tuning the myosin function.

Transformation of the Nonprocessive Fast Skeletal Myosin II into a Processive Motor.

Myosin family motors play diverse cellular roles. Precise insights into how the light chains contribute to the functional variabilities among myosin motors, however, remain unresolved. Here, it is demonstrated that the fast skeletal muscle myosin II isoform myosin heavy chain (MHC-IID) can be transformed into a processive motor, by simply replacing the native regulatory light chain MLC2f with the regulatory light chain variant MLC2v from the slow muscle myosin II. Single molecule kinetic analyses and optical trapping measurements of the hybrid motor reveal marked changes such as increased association rate of myosin toward adenosine triphosphate (ATP) and actin by more than twofold. The direct consequence of high adenosine diphosphate (ADP) affinity and increased actin rebinding is the altered overall actomyosin association time during the cross-bridge cycle. The data indicate that the MLC2v influences the duty ratio in the hybrid motor, suggestive of promoting interhead communication and enabling processive movement. This finding establishes that the regulatory light chain fine-tunes the motor's mechanical output that may have important implications under physiological conditions. Furthermore, the success of this approach paves the way to engineer motors from a known motor protein element to assemble highly specialized biohybrid machines for potential applications in nano-biomedicine and engineering.

Mg2+ -free ATP regulates the processivity of native cytoplasmic dynein.

Cytoplasmic dynein, a microtubule-based motor protein, is responsible for many cellular functions ranging from cargo transport to cell division. The various functions are carried out by a single isoform of cytoplasmic dynein, thus requiring different forms of motor regulation. A possible pathway to regulate motor function was revealed in optical trap experiments. Switching motor function from single steps to processive runs could be achieved by changing Mg2+ and ATP concentrations. Here, we confirm by single molecule total internal reflection fluorescence microscopy that a native cytoplasmic dynein dimer is able to switch to processive runs of more than 680 consecutive steps or 5.5 µm. We also identified the ratio of Mg2+ -free ATP to Mg.ATP as the regulating factor and propose a model for dynein processive stepping.

Load-dependent modulation of non-muscle myosin-2A function by tropomyosin 4.2.

Tropomyosin isoforms play an important role in the organisation of cytoplasmic actomyosin complexes in regard to function and cellular localisation. In particular, Tpm4.2 is upregulated in rapidly migrating cells and responsible for the specific recruitment of the cytoplasmic class-2 myosin NM-2A to actin filaments during the formation of stress fibres. Here, we investigate how the decoration of F-actin with Tpm4.2 affects the motor properties of NM-2A under conditions of low and high load. In the absence of external forces, decoration of actin filaments with Tpm4.2 does not affect the gated release of ADP from NM-2A and the transition from strong to weak actin-binding states. In the presence of resisting loads, our results reveal a marked increase in the mechanosensitive gating between the leading and trailing myosin head. Thereby, the processive behaviour of NM-2A is enhanced in the presence of resisting loads. The load- and Tpm4.2-induced changes in the functional behaviour of NM-2A are in good agreement with the role of this myosin in the context of stress fibres and the maintenance of cellular tension.

Molecular mechanism regulating myosin and cardiac functions by ELC.

The essential myosin light chain (ELC) is involved in modulation of force generation of myosin motors and cardiac contraction, while its mechanism of action remains elusive. We hypothesized that ELC could modulate myosin stiffness which subsequently determines its force production and cardiac contraction. Therefore, we generated heterologous transgenic mouse (TgM) strains with cardiomyocyte-specific expression of ELC with human ventricular ELC (hVLC-1; TgM(hVLC-1)) or E56G-mutated hVLC-1 (hVLC-1(E56G); TgM(E56G)). hVLC-1 or hVLC-1(E56G) expression in TgM was around 39% and 41%, respectively of total VLC-1. Laser trap and in vitro motility assays showed that stiffness and actin sliding velocity of myosin with hVLC-1 prepared from TgM(hVLC-1) (1.67 pN/nm and 2.3 µm/s, respectively) were significantly higher than myosin with hVLC-1(E56G) prepared from TgM(E56G) (1.25 pN/nm and 1.7 µm/s, respectively) or myosin with mouse VLC-1 (mVLC-1) prepared from C57/BL6 (1.41 pN/nm and 1.5 µm/s, respectively). Maximal left ventricular pressure development of isolated perfused hearts in vitro prepared from TgM(hVLC-1) (80.0 mmHg) were significantly higher than hearts from TgM(E56G) (66.2 mmHg) or C57/BL6 (59.3±3.9 mmHg). These findings show that ELCs decreased myosin stiffness, in vitro motility, and thereby cardiac functions in the order hVLC-1>hVLC-1(E56G)≈mVLC-1. They also suggest a molecular pathomechanism of hypertrophic cardiomyopathy caused by hVLC-1 mutations.

Insights into the structure and function of ciliary and flagellar doublet microtubules: tektins, Ca2+-binding proteins, and stable protofilaments.

Cilia and flagella are conserved, motile, and sensory cell organelles involved in signal transduction and human disease. Their scaffold consists of a 9-fold array of remarkably stable doublet microtubules (DMTs), along which motor proteins transmit force for ciliary motility and intraflagellar transport. DMTs possess Ribbons of three to four hyper-stable protofilaments whose location, organization, and specialized functions have been elusive. We performed a comprehensive analysis of the distribution and structural arrangements of Ribbon proteins from sea urchin sperm flagella, using quantitative immunobiochemistry, proteomics, immuno-cryo-electron microscopy, and tomography. Isolated Ribbons contain acetylated α-tubulin, ß-tubulin, conserved protein Rib45, >95% of the axonemal tektins, and >95% of the calcium-binding proteins, Rib74 and Rib85.5, whose human homologues are related to the cause of juvenile myoclonic epilepsy. DMTs contain only one type of Ribbon, corresponding to protofilaments A11-12-13-1 of the A-tubule. Rib74 and Rib85.5 are associated with the Ribbon in the lumen of the A-tubule. Ribbons contain a single ∼5-nm wide filament, composed of equimolar tektins A, B, and C, which interact with the nexin-dynein regulatory complex. A summary of findings is presented, and the functions of Ribbon proteins are discussed in terms of the assembly and stability of DMTs, ciliary motility, and other microtubule systems.

Mechanical and kinetic properties of ß-cardiac/slow skeletal muscle myosin.

We aimed to establish reference parameters to identify functional effects of familial hypertrophic cardiomyopathy-related point mutations in the ß-cardiac/slow skeletal muscle myosin heavy chain (ß-cardiac/MyHC-1). We determined mechanical and kinetic parameters of the ß-cardiac/MyHC-1 using human soleus muscle fibers that express the same myosin heavy chain (MyHC-1) as ventricular myocardium (ß-cardiac). The observed parameters are compared to previously reported data for rabbit psoas muscle fibers. We found all of the examined kinetic parameters to be slower in soleus fibers than in rabbit psoas muscle. Somewhat surprisingly, however, we also found that the stiffness of the ß-cardiac/MyHC-1 head domain is more than 3-fold lower than the stiffness of the fast isoform of psoas fibers. Furthermore, and different from rabbit psoas muscle, in human soleus fibers both the occupancy of force-generating cross-bridge states as well as the elastic extension of force-generating heads increase with temperature. Thus, a myosin head in the force generating states makes an increasing contribution to force with temperature. We support some of our fiber data by data from in vitro motility and optical trapping assays. Initial findings with FHC-related point mutations in the converter imply that the differences in stiffness of the head domain between the slow and fast isoform may well be due to particular differences in the amino acid sequence of the converter. We show that the slower kinetics may be linked to a larger flexibility of the ß-cardiac/MyHC-1 isoform compared to fast MyHC isoforms.

Two independent switches regulate cytoplasmic dynein's processivity and directionality.

Cytoplasmic dynein is a microtubule-based molecular motor that participates in a multitude of cell activities, from cell division to organelle transport. Unlike kinesin and myosin, where different tasks are performed by highly specialized members of these superfamilies, a single form of the dynein heavy chain is utilized for different functions. This versatility demands an extensive regulation of motor function. Using an improved application of an optical trap, we were now able to demonstrate that cytoplasmic dynein can generate a discrete power stroke as well as a processive walk in either direction; i.e., towards the plus- or towards the minus-end of a microtubule. Thus, dynein's motor functions can be described by four basic modes of motion: processive and nonprocessive movement, and movement in the forward and reverse directions. Importantly, these four modes of movement can be controlled by two switches. One switch, based on phosphate, determines the directionality of movement. The second switch, depending on magnesium, converts cytoplasmic dynein from a nonprocessive to a processive motor. The two switches can be triggered separately or jointly by changing concentrations of phosphate and magnesium in the local environment. The control of four modes of movement by two switches has major implications for our understanding of the cellular functions and regulation of cytoplasmic dynein. Based on recent studies of dynein's structure we are able to draw new conclusions on cytoplasmic dynein's stepping mechanism.

Plus- and minus-end directed microtubule motors bind simultaneously to herpes simplex virus capsids using different inner tegument structures.

Many viruses depend on host microtubule motors to reach their destined intracellular location. Viral particles of neurotropic alphaherpesviruses such as herpes simplex virus 1 (HSV1) show bidirectional transport towards the cell center as well as the periphery, indicating that they utilize microtubule motors of opposing directionality. To understand the mechanisms of specific motor recruitment, it is necessary to characterize the molecular composition of such motile viral structures. We have generated HSV1 capsids with different surface features without impairing their overall architecture, and show that in a mammalian cell-free system the microtubule motors dynein and kinesin-1 and the dynein cofactor dynactin could interact directly with capsids independent of other host factors. The capsid composition and surface was analyzed with respect to 23 structural proteins that are potentially exposed to the cytosol during virus assembly or cell entry. Many of these proteins belong to the tegument, the hallmark of all herpesviruses located between the capsid and the viral envelope. Using immunoblots, quantitative mass spectrometry and quantitative immunoelectron microscopy, we show that capsids exposing inner tegument proteins such as pUS3, pUL36, pUL37, ICP0, pUL14, pUL16, and pUL21 recruited dynein, dynactin, kinesin-1 and kinesin-2. In contrast, neither untegumented capsids exposing VP5, VP26, pUL17 and pUL25 nor capsids covered by outer tegument proteins such as vhs, pUL11, ICP4, ICP34.5, VP11/12, VP13/14, VP16, VP22 or pUS11 bound microtubule motors. Our data suggest that HSV1 uses different structural features of the inner tegument to recruit dynein or kinesin-1. Individual capsids simultaneously accommodated motors of opposing directionality as well as several copies of the same motor. Thus, these associated motors either engage in a tug-of-war or their activities are coordinately regulated to achieve net transport either to the nucleus during cell entry or to cytoplasmic membranes for envelopment during assembly.

Cytoplasmic dynein is not a conventional processive motor.

Cytoplasmic dynein is a microtubule-based molecular motor with a multitude of functions from cell division to organelle transport. Cargo transport is often achieved as a co-complex with dynactin and it is believed that this co-complex enhances the processive translocation of cargo along the microtubule tracks (King and Schroer, 2000; Culver-Hanlon et al., 2006). Single molecule studies have revealed that dynein on its own can also act as a processive motor (Reck-Peterson et al., 2006; Toba et al., 2006). However, these studies did not allow the detection of a non-processive motor function. Previous studies based on the transport of vesicles or liposomes indicated that processive transport could only be achieved by an ensemble of motor molecules (Schroer & Sheetz, 1991; Wang and Sheetz, 2000; Muresan et al., 2001). Here we use the three bead dumbbell assay to show for the first time, that cytoplasmic dynein is a non-processive motor at low ATP concentrations. Processivity can be restored even in the absence of dynactin by increasing the ATP concentration to 100muM. We propose that an altered occupancy of the different ATP binding sites (AAA1-4) acts as a modulator between processive and non-processive stepping.

Single-molecule measurement of the stiffness of the rigor myosin head.

The force-extension curve of single myosin subfragment-1 molecules, interacting in the rigor state with an actin filament, has been investigated at low [ATP] by applying a slow triangle-wave movement to the optical traps holding a bead-actin-bead dumbbell. In combination with a measurement of the overall stiffness of the dumbbell, this allowed characterization of the three extensible elements, the actin-bead links and the myosin. Simultaneously, another method, based on an analysis of bead position covariance, gave satisfactory agreement. The mean covariance-based estimate for the myosin stiffness was 1.79 pN/nm (SD = 0.7 pN/nm; SE = 0.06 pN/nm (n = 166 myosin molecules)), consistent with a recent report (1.7 pN/nm) from rabbit muscle fibers. In the triangle-wave protocol, the motion of the trapped beads during interactions was linear within experimental error over the physiological range of force applied to myosin (+/-10 pN), consistent with a Hookean model; any nonlinear terms could not be characterized. Bound states subjected to forces that resisted the working stroke (i.e., positive forces) detached at a significantly lower force than when subjected to negative forces, which is indicative of a strain-dependent dissociation rate.

Vaccinia-virus-induced cellular contractility facilitates the subcellular localization of the viral replication sites.

Poxviruses, such as vaccinia virus (VV), replicate their DNA in endoplasmic-reticulum-enclosed cytoplasmic sites. Here, we compare the dynamics of the VV replication sites with those of the attenuated strain, modified VV Ankara (MVA). By live-cell imaging, small, early replication sites of both viruses undergo motility typical of microtubule (MT)-motor-mediated movement. Over time, growing replication sites of VV collect around the nucleus in a MT-dependent fashion, whereas those of MVA remain mostly scattered in the cytoplasm. Surprisingly, blocking the dynein function does not impair the perinuclear accumulation of large VV replication sites. Live-cell imaging demonstrates that in contrast to small replication sites, large sites do not display MT-motor-mediated motility. Instead, VV infection induces cellular contractility that facilitates the collection of growing replication sites around the nucleus. In a subset of cells (30-40%), this VV-induced contractility is alternated by phases of directed cell migration, suggesting that the two processes may be linked. The MVA-infected cells do not display contractility or cell migration, supporting the idea that these cellular activities facilitate the efficient accumulation of the VV replication sites around the nucleus. We propose that the recently described cytoskeletal rearrangements induced by VV are a prerequisite for the observed cell contractility and migration activities that apparently contribute to the organization of the complex cytoplasmic life cycle of VV.

Tektin interactions and a model for molecular functions.

Tektins from echinoderm flagella were analyzed for microheterogeneity, self-associations and association with tubulin, resulting in a general model of tektin filament structure and function applicable to most eukaryotic cilia and flagella. Using a new antibody to tektin consensus peptide RPNVELCRD, well-characterized chain-specific antibodies and quantitative gel densitometry, tektins A, B and C were found to be present in equimolar amounts in Sarkosyl-urea-stable filaments. In addition, two isoforms of tektin A are present in half-molar ratios to tektins B and C. Cross-linking of AB filaments indicates in situ nearest neighbor associations of tektin A1B and A2B heterodimers, -trimers, -tetramers and higher oligomers. Soluble purified tektin C is cross-linked as homodimers, trimers and tetramers, but not higher oligomers. Tektin filaments associate with both loosely bound and tightly bound tubulin, and with the latter in a 1:1 molar ratio, implying a specific, periodic association of tightly bound tubulin along the tektin axis. Similarly, in tektin-containing Sarkosyl-stable protofilament ribbons, two polypeptides ( approximately 67/73 kDa, homologues of rib72, efhc1 and efhc2) are present in equimolar ratios to each other and to individual tektins, co-fractionating with loosely bound tubulin. These results suggest a super-coiled arrangement of tektin filaments, the organization of which has important implications for the evolution, assembly and functions of cilia and flagella.

The kinesin KIF1C and microtubule plus ends regulate podosome dynamics in macrophages.

Microtubules are important for the turnover of podosomes, dynamic, actin-rich adhesions implicated in migration and invasion of monocytic cells. The molecular basis for this functional dependency, however, remained unclear. Here, we show that contact by microtubule plus ends critically influences the cellular fate of podosomes in primary human macrophages. In particular, we identify the kinesin KIF1C, a member of the Kinesin-3 family, as a plus-end-enriched motor that targets regions of podosome turnover. Expression of mutation constructs or small interfering RNA-/short hairpin RNA-based depletion of KIF1C resulted in decreased podosome dynamics and ultimately in podosome deficiency. Importantly, protein interaction studies showed that KIF1C binds to nonmuscle myosin IIA via its PTPD-binding domain, thus providing an interface between the actin and tubulin cytoskeletons, which may facilitate the subcellular targeting of podosomes by microtubules. This is the first report to implicate a kinesin in podosome regulation and also the first to describe a function for KIF1C in human cells.

Repriming the actomyosin crossbridge cycle.

The central features of the mechanical cycle that drives the contraction of muscle are two translational steps: the working stroke, whereby an attached myosin crossbridge moves relative to the actin filament, and the repriming step, in which the crossbridge returns to its original orientation. Although the mechanism of the first of these is understood in some detail, that of the second has received less attention. Here, we show that repriming occurs after detachment of the crossbridge from the actin, rather than intervening between two actomyosin states with ATP bound [Eisenberg, E. & Greene, L. E. (1980) Annu. Rev. Physiol. 42, 293-309]. To discriminate between these two models we investigated the single-molecule mechanics of the myosin-actin interaction in the presence of ATP analogues such as GTP, for which the hydrolytic step itself limits the actomyosin GTPase rate to a much lower rate than for ATP. The lifetimes of bound states was proportional to 1/[GTP], indicating that during the bound period myosin was in the actomyosin rigor configuration. Moreover, despite the very low actomyosin GTPase, the rate of actin binding and formation of the rigor state was higher than with ATP; it follows that most interactions with actin result in the release of GTP and not of the products, GDP and phosphate. There was no significant movement of the actin during this interaction, so repriming must occur while myosin is dissociated, as in the original Lymn-Taylor scheme [Lymn, R. W. & Taylor, E. W. (1971) Biochemistry 10, 4617-4624].

Using optical tweezers to relate the chemical and mechanical cross-bridge cycles.

In most current models of muscle contraction there are two translational steps, the working stroke, whereby an attached myosin cross-bridge moves relative to the actin filament, and the repriming step, in which the cross-bridge returns to its original orientation. The development of single molecule methods has allowed a more detailed investigation of the relationship of these mechanical steps to the underlying biochemistry. In the normal adenosine triphosphate cycle, myosin.adenosine diphosphate.phosphate (M.ADP.Pi) binds to actin and moves it by ca. 5 nm on average before the formation of the end product, the rigor actomyosin state. All the other product-like intermediate states tested were found to give no net movement indicating that M.ADP.Pi alone binds in a pre-force state. Myosin states with bound, unhydrolysed nucleoside triphosphates also give no net movement, indicating that these must also bind in a post-force conformation and that the repriming, post- to pre-transition during the forward cycle must take place while the myosin is dissociated from actin. These observations fit in well with the structural model in which the working stroke is aligned to the opening of the switch 2 element of the ATPase site.

The working stroke upon myosin-nucleotide complexes binding to actin.

For many years, it has been known that myosin binds to actin tightly, but it had not been possible to devise a muscle fiber experiment to determine whether this binding energy is directly coupled to the working stroke of the actomyosin crossbridge cycle. Addressing the question at the single-molecule level with optical tweezers allows the problem to be resolved. We have compared the working stroke on the binding of four myosin complexes (myosin, myosin-ADP, myosin-pyrophosphate, and myosin-adenyl-5'yl imidodiphosphate) with that observed while hydrolyzing ATP. None of the four was observed to give a working stroke significantly different from zero. A working stroke (5.4 nm) was observed only with ATP, which indicates that the other states bind to actin in a rigor-like conformation and that myosin products (M.ADP.Pi), the state that binds to actin during ATPase activity, binds in a different, prestroke conformation. We conclude that myosin, while dissociated from actin, must be able to take up at least two mechanical conformations and show that our results are consistent with these conformations corresponding to the two states characterized at high resolution, which are commonly referred to in terms of having open and closed nucleotide binding pockets.

Modulation of substrate adhesion dynamics via microtubule targeting requires kinesin-1.

Recent studies have shown that the targeting of substrate adhesions by microtubules promotes adhesion site disassembly (Kaverina, I., O. Krylyshkina, and J.V. Small. 1999. J. Cell Biol. 146:1033-1043). It was accordingly suggested that microtubules serve to convey a signal to adhesion sites to modulate their turnover. Because microtubule motors would be the most likely candidates for effecting signal transmission, we have investigated the consequence of blocking microtubule motor activity on adhesion site dynamics. Using a function-blocking antibody as well as dynamitin overexpression, we found that a block in dynein-cargo interaction induced no change in adhesion site dynamics in Xenopus fibroblasts. In comparison, a block of kinesin-1 activity, either via microinjection of the SUK-4 antibody or of a kinesin-1 heavy chain construct mutated in the motor domain, induced a dramatic increase in the size and reduction in number of substrate adhesions, mimicking the effect observed after microtubule disruption by nocodazole. Blockage of kinesin activity had no influence on either the ability of microtubules to target substrate adhesions or on microtubule polymerisation dynamics. We conclude that conventional kinesin is not required for the guidance of microtubules into substrate adhesions, but is required for the focal delivery of a component(s) that retards their growth or promotes their disassembly.