RESUMEN
For over half a century, worldwide growth in affluence has continuously increased resource use and pollutant emissions far more rapidly than these have been reduced through better technology. The affluent citizens of the world are responsible for most environmental impacts and are central to any future prospect of retreating to safer environmental conditions. We summarise the evidence and present possible solution approaches. Any transition towards sustainability can only be effective if far-reaching lifestyle changes complement technological advancements. However, existing societies, economies and cultures incite consumption expansion and the structural imperative for growth in competitive market economies inhibits necessary societal change.
RESUMEN
Material stocks are an important part of the social metabolism. Owing to long service lifetimes of stocks, they not only shape resource flows during construction, but also during use, maintenance, and at the end of their useful lifetime. This makes them an important topic for sustainable development. In this work, a model of stocks and flows for nonmetallic minerals in residential buildings, roads, and railways in the EU25, from 2004 to 2009 is presented. The changing material composition of the stock is modeled using a typology of 72 residential buildings, four road and two railway types, throughout the EU25. This allows for estimating the amounts of materials in in-use stocks of residential buildings and transportation networks, as well as input and output flows. We compare the magnitude of material demands for expansion versus those for maintenance of existing stock. Then, recycling potentials are quantitatively explored by comparing the magnitude of estimated input, waste, and recycling flows from 2004 to 2009 and in a business-as-usual scenario for 2020. Thereby, we assess the potential impacts of the European Waste Framework Directive, which strives for a significant increase in recycling. We find that in the EU25, consisting of highly industrialized countries, a large share of material inputs are directed at maintaining existing stocks. Proper management of existing transportation networks and residential buildings is therefore crucial for the future size of flows of nonmetallic minerals.
RESUMEN
Renewable energy technologies, necessary for low-carbon infrastructure networks, are being adopted to help reduce fossil fuel dependence and meet carbon mitigation targets. The evolution of these technologies has progressed based on the enhancement of technology-specific performance criteria, without explicitly considering the wider system (global) impacts. This paper presents a methodology for simultaneously assessing local (technology) and global (infrastructure) performance, allowing key technological interventions to be evaluated with respect to their effect on the vulnerability of wider infrastructure systems. We use exposure of low carbon infrastructure to critical material supply disruption (criticality) to demonstrate the methodology. A series of local performance changes are analyzed; and by extension of this approach, a method for assessing the combined criticality of multiple materials for one specific technology is proposed. Via a case study of wind turbines at both the material (magnets) and technology (turbine generators) levels, we demonstrate that analysis of a given intervention at different levels can lead to differing conclusions regarding the effect on vulnerability. Infrastructure design decisions should take a systemic approach; without these multilevel considerations, strategic goals aimed to help meet low-carbon targets, that is, through long-term infrastructure transitions, could be significantly jeopardized.
Asunto(s)
Carbono , Energía Renovable , Tecnología/métodos , Ambiente , Combustibles Fósiles , Efecto Invernadero , Imanes , VientoRESUMEN
National exergy efficiency analysis relates the quality of primary energy inputs to an economy with end useful work in sectoral energy uses such as transport, heat and electrical devices. This approach has been used by a range of authors to explore insights to macroscale energy systems and linkages with economic growth. However, these analyses use a variety of calculation methods with sometimes coarse assumptions, inhibiting comparisons. Therefore, building on previous studies, this paper first contributes toward a common useful work accounting framework, by developing more refined methodological techniques for electricity end use and transport exergy efficiencies. Second, to test this more consistent and granular approach, these advances are applied to the US and UK for 1960 to 2010. The results reveal divergent aggregate exergy efficiencies: US efficiency remains stable at around 11%, while UK efficiency rises from 9% to 15%. The US efficiency stagnation is due to "efficiency dilution", where structural shifts to lower efficiency consumption (e.g., air-conditioning) outweigh device-level efficiency gains. The results demonstrate this is an important area of research, with consequent implications for national energy efficiency policies.
Asunto(s)
Fuentes Generadoras de Energía , Electricidad , Gasolina/análisis , Calefacción , Reino Unido , Estados UnidosRESUMEN
The transition to low carbon infrastructure systems required to meet climate change mitigation targets will involve an unprecedented roll-out of technologies reliant upon materials not previously widespread in infrastructure. Many of these materials (including lithium and rare earth metals) are at risk of supply disruption. To ensure the future sustainability and resilience of infrastructure, circular economy policies must be crafted to manage these critical materials effectively. These policies can only be effective if supported by an understanding of the material demands of infrastructure transition and what reuse and recycling options are possible given the future availability of end-of-life stocks. This Article presents a novel, enhanced stocks and flows model for the dynamic assessment of material demands resulting from infrastructure transitions. By including a hierarchical, nested description of infrastructure technologies, their components, and the materials they contain, this model can be used to quantify the effectiveness of recovery at both a technology remanufacturing and reuse level and a material recycling level. The model's potential is demonstrated on a case study on the roll-out of electric vehicles in the UK forecast by UK Department of Energy and Climate Change scenarios. The results suggest policy action should be taken to ensure Li-ion battery recycling infrastructure is in place by 2025 and NdFeB motor magnets should be designed for reuse. This could result in a reduction in primary demand for lithium of 40% and neodymium of 70%.
Asunto(s)
Litio/análisis , Modelos Teóricos , Neodimio/análisis , Tecnología , Carbono/química , Suministros de Energía Eléctrica , Humanos , Reciclaje , Reino UnidoRESUMEN
Economic development and growth depend on growing levels of resource use, and result in environmental impacts from large scale resource extraction and emissions of waste. In this study, we examine the resource dependency of economic activities over the past several decades for a set of countries comprising developing, emerging and mature industrialized economies. Rather than a single universal industrial development pathway, we find a diversity of economic dependencies on material use, made evident through cluster analysis. We conduct tests for relative and absolute decoupling of the economy from material use, and compare these with similar tests for decoupling from carbon emissions, both for single countries and country groupings using panel analysis. We show that, over the longer term, emerging and developing countries tend to have significantly larger material-economic coupling than mature industrialized economies (although this effect may be enhanced by trade patterns), but that the contrary is true for short-term coupling. Moreover, we demonstrate that absolute dematerialization limits economic growth rates, while the successful industrialization of developing countries inevitably requires a strong material component. Alternative development priorities are thus urgently needed both for mature and emerging economies: reducing absolute consumption levels for the former, and avoiding the trap of resource-intensive economic and human development for the latter.
Asunto(s)
Conservación de los Recursos Naturales , Desarrollo Económico , Países Desarrollados , Países en Desarrollo , Humanos , Modelos TeóricosRESUMEN
Indicators of resource use such as material and energy flow accounts, emission data and the ecological footprint inform societies about their performance by evaluating resource use efficiency and the effectiveness of sustainability policies. The human appropriation of net primary production (HANPP) is an indicator of land-use intensity on each nation's territory used in research as well as in environmental reports. 'Embodied HANPP' (eHANPP) measures the HANPP anywhere on earth resulting from a nation's domestic biomass consumption. The objectives of this article are (i) to study the relation between eHANPP and other resource use indicators and (ii) to analyse socioeconomic and natural determinants of global eHANPP patterns in the year 2000. We discuss a statistical analysis of >140 countries aiming to better understand these relationships. We found that indicators of material and energy throughput, fossil-energy related CO2 emissions as well as the ecological footprint are highly correlated with each other as well as with GDP, while eHANPP is neither correlated with other resource use indicators nor with GDP, despite a strong correlation between final biomass consumption and GDP. This can be explained by improvements in agricultural efficiency associated with GDP growth. Only about half of the variation in eHANPP can be explained by differences in national land-use systems, suggesting a considerable influence of trade on eHANPP patterns. eHANPP related with biomass trade can largely be explained by differences in natural endowment, in particular the availability of productive area. We conclude that eHANPP can deliver important complimentary information to indicators that primarily monitor socioeconomic metabolism.
RESUMEN
This study presents fossil-fuel related CO(2) emissions in Austria and Czechoslovakia (current Czech Republic and Slovakia) for 1830-2000. The drivers of CO(2) emissions are discussed by investigating the variables of the standard Kaya identity for 1920-2000 and conducting a comparative Index Decomposition Analysis. Proxy data on industrial production and household consumption are analysed to understand the role of the economic structure. CO(2) emissions increased in both countries in the long run. Czechoslovakia was a stronger emitter of CO(2) throughout the time period, but per-capita emissions significantly differed only after World War I, when Czechoslovakia and Austria became independent. The difference in CO(2) emissions increased until the mid-1980s (the period of communism in Czechoslovakia), explained by the energy intensity and the composition effects, and higher industrial production in Czechoslovakia. Counterbalancing factors were the income effect and household consumption. After the Velvet revolution in 1990, Czechoslovak CO(2) emissions decreased, and the energy composition effect (and industrial production) lost importance. Despite their different political and economic development, Austria and Czechoslovakia reached similar levels of per-capita CO(2) emissions in the late 20th century. Neither Austrian "eco-efficiency" nor Czechoslovak restructuring have been effective in reducing CO(2) emissions to a sustainable level.
RESUMEN
Resource productivity, measured as GDP output per resource input, is a widespread sustainability indicator combining economic and environmental information. Resource productivity is ubiquitous, from the IPAT identity to the analysis of dematerialization trends and policy goals. High resource productivity is interpreted as the sign of a resource-efficient, and hence more sustainable, economy. Its inverse, resource intensity (resource per GDP) has the reverse behavior, with higher values indicating environmentally inefficient economies. In this study, we investigate the global systematic relationship between material, energy and carbon productivities, and economic activity. We demonstrate that different types of materials and energy exhibit fundamentally different behaviors, depending on their international income elasticities of consumption. Biomass is completely inelastic, whereas fossil fuels tend to scale proportionally with income. Total materials or energy, as aggregates, have intermediate behavior, depending on the share of fossil fuels and other elastic resources. We show that a small inelastic share is sufficient for the total resource productivity to be significantly correlated with income. Our analysis calls into question the interpretation of resource productivity as a sustainability indicator. We conclude with suggestions for potential alternatives.
Asunto(s)
Conservación de los Recursos Naturales , Combustibles Fósiles , Modelos Teóricos , Biomasa , AmbienteRESUMEN
There is a growing recognition that the interrelations between agriculture, food, bioenergy, and climate change have to be better understood in order to derive more realistic estimates of future bioenergy potentials. This article estimates global bioenergy potentials in the year 2050, following a "food first" approach. It presents integrated food, livestock, agriculture, and bioenergy scenarios for the year 2050 based on a consistent representation of FAO projections of future agricultural development in a global biomass balance model. The model discerns 11 regions, 10 crop aggregates, 2 livestock aggregates, and 10 food aggregates. It incorporates detailed accounts of land use, global net primary production (NPP) and its human appropriation as well as socioeconomic biomass flow balances for the year 2000 that are modified according to a set of scenario assumptions to derive the biomass potential for 2050. We calculate the amount of biomass required to feed humans and livestock, considering losses between biomass supply and provision of final products. Based on this biomass balance as well as on global land-use data, we evaluate the potential to grow bioenergy crops and estimate the residue potentials from cropland (forestry is outside the scope of this study). We assess the sensitivity of the biomass potential to assumptions on diets, agricultural yields, cropland expansion and climate change. We use the dynamic global vegetation model LPJmL to evaluate possible impacts of changes in temperature, precipitation, and elevated CO(2) on agricultural yields. We find that the gross (primary) bioenergy potential ranges from 64 to 161 EJ y(-1), depending on climate impact, yields and diet, while the dependency on cropland expansion is weak. We conclude that food requirements for a growing world population, in particular feed required for livestock, strongly influence bioenergy potentials, and that integrated approaches are needed to optimize food and bioenergy supply.