RESUMEN
Accurate knowledge of the joint kinematics, kinetics, and soft tissue mechanical responses is essential in the evaluation of musculoskeletal (MS) disorders. Since in vivo measurement of these quantities requires invasive methods, musculoskeletal finite element (MSFE) models are widely used for simulations. There are, however, limitations in the current approaches. Sequentially linked MSFE models benefit from complex MS and FE models; however, MS model's outputs are independent of the FE model calculations. On the other hand, due to the computational burden, embedded (concurrent) MSFE models are limited to simple material models and cannot estimate detailed responses of the soft tissue. Thus, first we developed a MSFE model of the knee with a subject-specific MS model utilizing an embedded 12 degrees of freedom (DoFs) knee joint with elastic cartilages in which included both secondary kinematic and soft tissue deformations in the muscle force estimation (inverse dynamics). Then, a muscle-force-driven FE model with fibril-reinforced poroviscoelastic cartilages and fibril-reinforced poroelastic menisci was used in series to calculate detailed tissue mechanical responses (forward dynamics). Second, to demonstrate that our workflow improves the simulation results, outputs were compared to results from the same FE models which were driven by conventional MS models with a 1 DoF knee, with and without electromyography (EMG) assistance. The FE model driven by both the embedded and the EMG-assisted MS models estimated similar results and consistent with experiments from literature, compared to the results estimated by the FE model driven by the MS model with 1 DoF knee without EMG assistance.
Asunto(s)
Articulación de la Rodilla , Modelos Biológicos , Fenómenos Biomecánicos , Análisis de Elementos Finitos , Humanos , Fenómenos Mecánicos , MúsculosRESUMEN
Computational models of the knee joint are useful for evaluating stresses and strains within the joint tissues. However, the outcome of those models is sensitive to the material model and material properties chosen for ligaments, the collagen reinforced tissues connecting bone to bone. The purpose of this study was to investigate different compositionally motivated material models and further to develop a model that can accurately reproduce experimentally measured stress-relaxation data of bovine anterior cruciate ligament (ACL). Tensile testing samples were extracted from ACLs of bovine knee joints (N = 10) and subjected to a three-step stress-relaxation test at the toe region. Data from the experiments was averaged and one average finite element model was generated to replicate the experiment. Poroelastic and different fibril-reinforced poro(visco)elastic material models were applied, and their material parameters were optimized to reproduce the experimental force-time response. Material models with only fluid flow mediated relaxation were not able to capture the stress-relaxation behavior (R2 = 0.806, 0.803 and 0.938). The inclusion of the viscoelasticity of the fibrillar network improved the model prediction (R2 = 0.978 and 0.976), but the complex stress-relaxation behavior was best captured by a poroelastic model with a nonlinear two-relaxation-time strain-recruited viscoelastic fibrillar network (R2 = 0.997). The results suggest that in order to replicate the multi-step stress-relaxation behavior of ACL in tension, the fibrillar network formulation should include the complex nonlinear viscoelastic phenomena.
Asunto(s)
Ligamento Cruzado Anterior , Articulación de la Rodilla , Animales , Fenómenos Biomecánicos , Bovinos , Elasticidad , Análisis de Elementos Finitos , Modelos Biológicos , Estrés Mecánico , ViscosidadRESUMEN
Mechanical material properties of ligaments originate from their biochemical composition and structural organization. However, it is not yet fully elucidated how biochemical contents vary between knee ligaments and patellar tendon (PT) and how they relate with mechanical properties. The purpose of this study was to compare water, collagen, proteoglycan and elastin contents between bovine knee ligaments and PT and correlate them with tensile material properties. Hydroxyproline (collagen), uronic acid (proteoglycan) and elastin contents per wet and dry weights were measured using colorimetric biochemical methods for bovine knee ligament and PT samples (n = 10 knees). Direct comparison and correlation with multiple linear regression were performed against biomechanical properties measured in our earlier study. Anterior cruciate ligament (ACL) and PT exhibited lower hydroxyproline content per wet weight compared with other ligaments (p < 0.05). Cruciate ligaments had higher uronic acid content per dry weight compared with collateral ligaments (p < 0.05). Posterior cruciate ligament had higher elastin content than ACL (p < 0.05). Higher hydroxyproline content per wet weight implied higher Young's modulus, strength and toughness. Quantitatively, higher elastin content per wet weight predicted higher toe region nonlinearity and Young's modulus whereas higher uronic acid content per dry weight predicted lower Young's modulus, yield stress and toughness. Differences between ligaments in biochemical composition highlight differences in their physiological function and loading regimes. As expected, collagen content showed similar trend with stiffness and strength. The predictive role of proteoglycan and elastin contents on the mechanical properties might indicate their important functional role in ligaments.
Asunto(s)
Ligamento Rotuliano , Animales , Fenómenos Biomecánicos , Bovinos , Elastina , Hidroxiprolina , Articulación de la Rodilla , Ácidos Urónicos , AguaRESUMEN
Abnormal mechanical loading is essential in the onset and progression of knee osteoarthritis. Combined musculoskeletal (MS) and finite element (FE) modeling is a typical method to estimate load distribution and tissue responses in the knee joint. However, earlier combined models mostly utilize static-optimization based MS models and muscle force driven FE models typically use elastic materials for soft tissues or analyze specific time points of gait. Therefore, here we develop an electromyography-assisted muscle force driven FE model with fibril-reinforced poro(visco)elastic cartilages and menisci to analyze knee joint loading during the stance phase of gait. Moreover, since ligament pre-strains are one of the important uncertainties in joint modeling, we conducted a sensitivity analysis on the pre-strains of anterior and posterior cruciate ligaments (ACL and PCL) as well as medial and lateral collateral ligaments (MCL and LCL). The model produced kinematics and kinetics consistent with previous experimental data. Joint contact forces and contact areas were highly sensitive to ACL and PCL pre-strains, while those changed less cartilage stresses, fibril strains, and fluid pressures. The presented workflow could be used in a wide range of applications related to the aetiology of cartilage degeneration, optimization of rehabilitation exercises, and simulation of knee surgeries.
Asunto(s)
Cartílago Articular/fisiología , Electromiografía , Análisis de Elementos Finitos , Articulación de la Rodilla/fisiología , Menisco/fisiología , Modelos Biológicos , Músculo Esquelético/fisiología , Adulto , Fenómenos Biomecánicos , Simulación por Computador , Elasticidad , Fémur/fisiología , Humanos , Masculino , Porosidad , Estrés Mecánico , Tibia/fisiologíaRESUMEN
The knee ligaments and patellar tendon function in concert with each other and other joint tissues, and are adapted to their specific physiological function via geometry and material properties. However, it is not well known how the viscoelastic and quasi-static material properties compare between the ligaments. The purpose of this study was to characterize and compare these material properties between the knee ligaments and patellar tendon. Dumbbell-shaped tensile test samples were cut from bovine knee ligaments (ACL, LCL, MCL, PCL) and patellar tendon (PT) and subjected to tensile testing (nâ¯=â¯10 per ligament type). A sinusoidal loading test was performed at 8% strain with 0.5% strain amplitude using 0.1, 0.5 and 1â¯Hz frequencies. Subsequently, an ultimate tensile test was performed to investigate the stress-strain characteristics. At 0.1â¯Hz, the phase difference between stress and strain was higher in LCL compared with ACL, PCL and PT (pâ¯<â¯0.05), and at 0.5â¯Hz that was higher in LCL compared with all other ligaments and PT (pâ¯<â¯0.05). PT had the longest toe-region strain (pâ¯<â¯0.05 compared with PCL and MCL) and MCL had the highest linear and strain-dependent modulus, and toughness (pâ¯<â¯0.05 compared with ACL, LCL and PT). The results indicate that LCL is more viscous than other ligaments at low-frequency loads. MCL was the stiffest and toughest, and its modulus increased most steeply at the toe-region, possibly implying a greater amount of collagen. This study improves the knowledge about elastic, viscoelastic and failure properties of the knee ligaments and PT.
Asunto(s)
Ligamentos Colaterales/fisiología , Articulación de la Rodilla/fisiología , Ligamento Rotuliano/fisiología , Animales , Fenómenos Biomecánicos , Cadáver , Bovinos , Colágeno , Elasticidad , Ligamentos Articulares , Resistencia a la TracciónRESUMEN
Bone mineral density declines with increasing older age. We examined the levels of circulating factors known to regulate bone metabolism in healthy young and older adults. The circulating levels of dickkopf-1, osteocalcin, osteoprotegerin and sclerostin were positively associated with whole-body bone mineral density (WBMD) in older adults, despite the average WBMD being lower and circulating dickkopf-1, osteoprotegerin and sclerostin being higher in old than young. INTRODUCTION: This study aims to investigate the relationship between whole-body bone mineral density (WBMD) and levels of circulating factors with known roles in bone remodelling during 'healthy' ageing. METHODS: WBMD and fasting plasma concentrations of dickkopf-1, fibroblast growth factor-23, osteocalcin, osteoprotegerin, osteopontin and sclerostin were measured in 272 older subjects (69 to 81 years; 52% female) and 171 younger subjects (18-30 years; 53% female). RESULTS: WBMD was lower in old than young. Circulating osteocalcin was lower in old compared with young, while dickkopf-1, osteoprotegerin and sclerostin were higher in old compared with young. These circulating factors were each positively associated with WBMD in the older adults and the relationships remained after adjustment for covariates (r values ranging from 0.174 to 0.254, all p < 0.01). In multivariate regression, the body mass index, circulating sclerostin and whole-body lean mass together accounted for 13.8% of the variation with WBMD in the older adults. In young adults, dickkopf-1 and body mass index together accounted for 7.7% of variation in WBMD. CONCLUSION: Circulating levels of dickkopf-1, osteocalcin, osteoprotegerin and sclerostin are positively associated with WBMD in community-dwelling older adults, despite the average WBMD being lower and circulating dickkopf-1, osteoprotegerin and sclerostin being higher in old than young.
Asunto(s)
Envejecimiento/sangre , Densidad Ósea/fisiología , Proteínas Morfogenéticas Óseas/sangre , Péptidos y Proteínas de Señalización Intercelular/sangre , Osteoprotegerina/sangre , Absorciometría de Fotón/métodos , Proteínas Adaptadoras Transductoras de Señales , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Envejecimiento/fisiología , Biomarcadores/sangre , Índice de Masa Corporal , Remodelación Ósea/fisiología , Resorción Ósea/sangre , Resorción Ósea/fisiopatología , Estudios Transversales , Europa (Continente)/epidemiología , Femenino , Marcadores Genéticos , Humanos , Masculino , Osteoporosis/sangre , Osteoporosis/epidemiología , Osteoporosis/fisiopatología , Adulto JovenRESUMEN
Consensus on clinically valid diagnostic criteria for sarcopenia requires a systematical assessment of the association of its candidate measures of muscle mass, muscle strength, and physical performance on one side and muscle-related clinical parameters on the other side. In this study, we systematically assessed associations between serum albumin as a muscle-related parameter and muscle measures in 172 healthy young (aged 18-30 years) and 271 old participants (aged 69-81 year) from the European MYOAGE study. Muscle measures included relative muscle mass, i.e., total- and appendicular lean mass (ALM) percentage, absolute muscle mass, i.e., ALM/height(2) and total lean mass in kilograms, handgrip strength, and walking speed. Muscle measures were standardized and analyzed in multivariate linear regression models, stratified by age. Adjustment models included age, body composition, C-reactive protein and lifestyle factors. In young participants, serum albumin was positively associated with lean mass percentage (p = 0.007) and with ALM percentage (p = 0.001). In old participants, serum albumin was not associated with any of the muscle measures. In conclusion, the association between serum albumin and muscle measures was only found in healthy young participants and the strongest for measures of relative muscle mass.
Asunto(s)
Envejecimiento/fisiología , Composición Corporal/fisiología , Estilo de Vida , Fuerza Muscular/fisiología , Albúmina Sérica/metabolismo , Absorciometría de Fotón , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Proteína C-Reactiva/metabolismo , Estudios Transversales , Femenino , Humanos , Masculino , Valores de Referencia , Sarcopenia/metabolismo , Sarcopenia/fisiopatología , Adulto JovenRESUMEN
Pathological obstruction in lungs leads to severe decreases in muscle strength and mobility in patients suffering from chronic obstructive pulmonary disease. The purpose of this study was to investigate the interdependency between muscle strength, spirometric pulmonary functions and mobility outcomes in healthy older men and women, where skeletal muscle and pulmonary function decline without interference of overt disease. A total of 135 69- to 81-year-old participants were recruited into the cross-sectional study, which was performed as a part of European study MyoAge. Full, partial and no mediation models were constructed to assess the interdependency between muscle strength (handgrip strength, knee extension torque, lower extremity muscle power), spirometric pulmonary function (FVC, FEV1 and FEF50) and mobility (6-min walk and Timed Up and Go tests). The models were adjusted for age, sex, total fat mass, body height and site of enrolment. Partial mediation models, indicating both direct and pulmonary function mediated associations between muscle strength and mobility, fitted best to the data. Greater handgrip strength was significantly associated with higher FVC, FEV1 and FEF50 (p < 0.05). Greater muscle power was significantly associated with better performance in mobility tests. Results suggest that decline in mobility with aging may be caused by decreases in both muscle strength and power but also mediated through decreases in spirometric pulmonary function. Future longitudinal studies are warranted to better understand how loss of function and mass of the respiratory muscles will affect pulmonary function among older people and how these changes are linked to mobility decline.
Asunto(s)
Envejecimiento/fisiología , Volumen Espiratorio Forzado/fisiología , Estado de Salud , Actividad Motora/fisiología , Fuerza Muscular/fisiología , Espirometría/métodos , Anciano , Estudios Transversales , Femenino , Estudios de Seguimiento , Voluntarios Sanos , Humanos , Estilo de Vida , Masculino , Pronóstico , Caminata/fisiologíaRESUMEN
Relative and absolute muscle mass and muscle strength are used as diagnostic criteria for sarcopenia. We aimed to assess which diagnostic criteria are most associated with physical performance in 180 young (18-30 years) and 281 healthy old participants (69-81 years) of the European study MYOAGE. Diagnostic criteria included relative muscle mass (total or appendicular lean mass (ALM) as percentage of body mass), absolute muscle mass (ALM/height squared and total lean mass), knee extension torque, and handgrip strength. Physical performance comprised walking speed, Timed Up and Go test (TUG), and in a subgroup physical fitness. Diagnostic criteria for sarcopenia and physical performance were standardized, and the associations were analyzed using linear regression models stratified by age category, with adjustments for age, gender, and country. In old participants, relative muscle mass was associated with faster walking speed, faster TUG, and higher physical fitness (all p < 0.001). Absolute muscle mass was not associated with physical performance. Knee extension torque and handgrip strength were associated with faster walking speed (both p ≤ 0.003). Knee extension torque was associated with TUG (p = 0.001). Knee extension torque and handgrip strength were not associated with physical fitness. In young participants, there were no significant associations between diagnostic criteria for sarcopenia and physical performance, except for a positive association between relative muscle mass and physical fitness (p < 0.001). Relative muscle mass, defined as lean mass or ALM percentage, was most associated with physical performance. Absolute muscle mass including ALM/height squared was not associated with physical performance. This should be accounted for when defining sarcopenia.
Asunto(s)
Fuerza Muscular/fisiología , Aptitud Física/fisiología , Sarcopenia/diagnóstico , Sarcopenia/fisiopatología , Absorciometría de Fotón , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Composición Corporal , Estatura , Estudios Transversales , Europa (Continente) , Femenino , Evaluación Geriátrica , Fuerza de la Mano/fisiología , Humanos , Articulación de la Rodilla/fisiología , Estilo de Vida , Masculino , Persona de Mediana Edad , Dinamómetro de Fuerza Muscular , Factores de Riesgo , Encuestas y Cuestionarios , Torque , Caminata/fisiologíaRESUMEN
SUMMARY: Currently used diagnostic measures for sarcopenia utilize different measures of muscle mass, muscle strength, and physical performance. These diagnostic measures associate differently to bone mineral density (BMD), as an example of muscle-related clinical outcome. These differences should be taken into account when studying sarcopenia. INTRODUCTION: Diagnostic measures for sarcopenia utilize different measures of muscle mass, muscle strength, and physical performance. To understand differences between these measures, we determined the association with respect to whole body BMD, as an example of muscle-related clinical outcome. METHODS: In the European cross-sectional study MYOAGE, 178 young (18-30 years) and 274 healthy old participants (69-81 years) were recruited. Body composition and BMD were evaluated using dual-energy X-ray densitometry. Diagnostic measures for sarcopenia were composed of lean mass as percentage of body mass, appendicular lean mass (ALM) as percentage of body mass, ALM divided by height squared (ALM/height(2)), knee extension torque, grip strength, walking speed, and Timed Up and Go test (TUG). Linear regression models were stratified for sex and age and adjusted for age and country, and body composition in separate models. RESULTS: Lean mass and ALM/height(2) were positively associated with BMD (P < 0.001). Significance remained in all sex and age subgroups after further adjustment for fat mass, except in old women. Lean mass percentage and ALM percentage were inversely associated with BMD in old women (P < 0.001). These inverse associations disappeared after adjustment for body mass. Knee extension torque and handgrip strength were positively associated with BMD in all subgroups (P < 0.01), except in old women. Walking speed and TUG were not related to BMD. CONCLUSIONS: The associations between diagnostic measures of sarcopenia and BMD as an example of muscle-related outcome vary widely. Differences between diagnostic measures should be taken into account when studying sarcopenia.