Research on Thermal Insulation Performance and Impact on Indoor Air Quality of Cellulose-Based Thermal Insulation Materials.

Worldwide, the need for thermal insulation materials used to increase the energy performance of buildings and ensure indoor thermal comfort is constantly growing. There are several traditional, well-known and frequently used thermal insulation materials on the building materials market, but there is a growing trend towards innovative materials based on agro-industrial waste. This paper analyses the performance of 10 such innovative thermal insulation materials obtained by recycling cellulosic and/or animal waste, using standardised testing methods. More precisely, thermal insulation materials based on the following raw materials were analysed: cellulose acetate, cigarette filter manufacturing waste; cellulose acetate, cigarette filter manufacturing waste and cigarette paper waste; cellulose acetate, waste from cigarette filter manufacturing, waste cigarette paper and waste aluminised paper; cellulose from waste paper (two types made by two independent manufacturers); wood fibres; cellulose from cardboard waste; cellulose from waste cardboard, poor processing, inhomogeneous product; rice husk waste and composite based on sheep wool, recycled PET fibres and cellulosic fibres for the textile industry. The analysis followed the performance in terms of thermal insulating quality, evidenced by the thermal conductivity coefficient (used as a measurable indicator) determined for both dry and conditioned material at 50% RH, in several density variants, simulating the subsidence under its own weight or under various possible stresses arising in use. The results showed in most cases that an increase in material density has beneficial effects by reducing the coefficient of thermal conductivity, but exceptions were also reported. In conjunction with this parameter, the analysis of the 10 types of materials also looked at their moisture sorption/desorption capacity (using as a measurable indicator the amount of water stored by the material), concluding that, although they have a capacity to regulate the humidity of the indoor air, under low RH conditions the water loss is not complete, leaving a residual quantity of material that could favour the development of mould. Therefore, the impact on indoor air quality was also analysed by assessing the risk of mould growth (using as a measurable indicator the class and performance category of the material in terms of nutrient content conducive to the growth of microorganisms) under high humidity conditions but also the resistance to the action of two commonly encountered moulds, Aspergillus niger and Penicillium notatum. The results showed a relative resistance to the action of microbiological factors, indicating however the need for intensified biocidal treatment.

Study on the Possibilities of Developing Cementitious or Geopolymer Composite Materials with Specific Performances by Exploiting the Photocatalytic Properties of TiO2 Nanoparticles.

Starting from the context of the principles of Sustainable Development and Circular Economy concepts, the paper presents a synthesis of research in the field of the development of materials of interest, such as cementitious composites or alkali-activated geopolymers. Based on the reviewed literature, the influence of compositional or technological factors on the physical-mechanical performance, self-healing capacity and biocidal capacity obtained was analyzed. The inclusion of TiO2 nanoparticles in the matrix increase the performances of cementitious composites, producing a self-cleaning capacity and an anti-microbial biocidal mechanism. As an alternative, the self-cleaning capacity can be achieved through geopolymerization, which provides a similar biocidal mechanism. The results of the research carried out indicate the real and growing interest for the development of these materials but also the existence of some elements still controversial or insufficiently analyzed, therefore concluding the need for further research in these areas. The scientific contribution of this study consists of bringing together two apparently distinct research directions in order to identify convergent points, to create a favorable framework for the development of an area of research little addressed so far, namely, the development of innovative building materials by combining improved performance with the possibility of reducing environmental impact, awareness and implementation of the concept of a Circular Economy.

Models of mycorrhizal colonization patterns and strategies induced by biostimulator treatments in Zea mays roots.

Agronomic inputs and technologies, especially fertilizers, act on the evolution of the symbiotic partnership between arbuscular mycorrhizal fungi and cultivated plants. The use of the MycoPatt method for the assessment of mycorrhizas in maize roots leads to the extraction of large parameter databases with an increased resolution over the colonization mechanism. The application of a biostimulator treatment on plants acted toward a reduction of root permissiveness for mycorrhizas. The phenomenon was noticeable through an increased colonization variability that overlapped with plant nutritional needs. The annual characteristic of the plant was highlighted by the simultaneous presence of arbuscules and vesicles, with a high share of arbuscules in the advanced phenophases. Colonized root parts presented numerous arbuscule-dominated areas in all phenophases, which indicated a continuous formation of these structures and an intense nutrient transfer between partners. Mycorrhizal maps showed the slowing effect of the biostimulators on colonization, with one phenophase delay in the case of biostimulated plants compared to the ones without biostimulators. The forecast models presented gradual colonization in plants without biostimulators, with the expansion of new hyphal networks. The use of biostimulators on plants exhibited a lower permissiveness for new colonization areas, and the mechanism relies on hyphae developed in the former phenophases.

Mycorrhizal Maps as a Tool to Explore Colonization Patterns and Fungal Strategies in the Roots of Festuca rubra and Zea mays.

Arbuscular mycorrhizal fungi are symbionts in the roots of plants. Their role is to sustain host development and maintain the nutritional equilibrium in the ecosystems. The colonization process is dependent on several factors like soil ecology, the genetic diversity of the fungi and host, and agronomic practices. Their synchronized action leads to the development of a complex hyphal network and leads to the secondary development of vesicles and arbuscules in the root cells. The aim of this research was to analyze the efficiency of the mycorrhizal patterns (MycoPatt) method for the positioning of fungal structures in the roots of Festuca rubra and Zea mays. Another objective was to explore the fungal colonization strategy as revealed by mycorrhizal maps of each species. The acquisition and assemblage of multiple microscopic images allow mycorrhizal colonization assessment in both corn and red fescue plants to provide information on the realistic position of the developed structures. The observed mycorrhizal patterns highlight the variable efficiency of each plant in terms of developing connections with soil symbiotic fungi, caused by applied treatments and growth stage. Mycorrhizal detailed maps obtained through the MycoPatt method are useful for the early detection of plant efficiency in symbiotic acquisition from the soil.

Arbuscular Mycorrhizal Fungi and Fertilization Influence Yield, Growth and Root Colonization of Different Tomato Genotype.

Arbuscular mycorrhizal fungi (AMF) are beneficial for plant development and help absorb water and minerals from the soil. The symbiosis between these fungi and plant roots is extremely important and could limit crop dependence on fertilizers. The aim of this study was to evaluate the influence of AMF on tomatoes (Solanum lycopersicum L.), based on important agronomic traits of vegetative biomass, production, and fruits. The experiment was conducted in high tunnels, using 12 tomato genotypes under three different treatments: T1, control, without fertilizer and mycorrhizae colonization; T2, fertigation, without mycorrhizae colonization; and T3, arbuscular mycorrhizal fungi (AMF), seedling roots being inoculated with specialized soil-borne fungi. Plant growth, yield and fruit parameters indicated better results under mycorrhizal treatment. Root colonization with fungi varied significantly depending on the treatment and genotype, with a variation of 6.0-80.3% for frequency and 2.6-24.6% for intensity. For a majority of characteristics, the mycorrhization (T3) induced significant differences compared with the T1 and T2 treatments. In addition, AMF treatment induced a different response among the genotypes. Among the elements analyzed in the soil, significant differences were observed in phosphorous levels between planting the seedlings and after tomato harvesting and clearing of the plants. The results suggest that reducing fertilizers and promoting the symbiotic relationships of plants with soil microorganisms may have beneficial consequences for tomato crops.

Exploration of Soil Functional Microbiomes-A Concept Proposal for Long-Term Fertilized Grasslands.

Exploring grassland microbiomes is a challenge in the current context of linking soil microorganism activity with the balance of these ecosystems. Microbiologists are constantly attempting to develop faster and lower-cost methods, and propose new and best-fitted indicators that will provide a more complex data analysis. A different concept was proposed for assessing functional microbiomes by splitting the functional ecological niche into complementary segments. The comparison with the upper and lower limits of the ecological niche provides a clearer image of community alterations due to long-term applied treatments. The method allows the extraction of the most sensitive and stable functional guilds, with the extraction of the most critical dominant-codominant functional groups in every segment of the functional niche. The resulting microbial functional-sociological model is ready to use on community-level physiological profile databases and also can be applied backward for vegetation analysis.

Divergence in Corn Mycorrhizal Colonization Patterns Due to Organic Treatment.

Excessive application of chemical fertilizers and other agrochemicals can cause large imbalances in soils and agricultural ecosystems. In this context, mycorrhizae represent a viable solution to mitigate these negative effects. Arbuscular mycorrhizae are vital symbionts due to the multiple benefits they bring to both crops and the entire agroecosystem. The main purpose of this study was to observe whether differentiated fertilization has an influence on mycorrhizal colonization patterns in corn. Observed frequencies and intensities of colonization varied widely between phenophases and treatments, with 20% variation for frequency and 14% for intensity, which implies the constant development of both partners during the vegetation period. Arbuscules and vesicles were present in all development stages, but the overall mean was lower than 4% for arbuscules and 1% for vesicles in the analyzed root fragments. Intensity was highly correlated with frequency of colonization compared with arbuscules, where the coefficient was 0.54, and vesicles, with a coefficient of 0.16. Both PCA and NMDS provided good graphical solutions, with a high resolution due to explained variance and good spatial position of vectors. The use of mycorrhizal maps permits the full exploration of colonization patterns and fungal strategy, and the assessment of mycorrhizae-free areas. For the untreated variant, the strategy was oriented toward a longitudinal colonization followed by an irregular development of hyphae with multiple non-colonized areas. Treatment acts to stimulate the appearance of mycorrhizal spots, which further develop radially.

Alternative Control of Phragmidium rubi-idaei Infecting Two Rubus Species.

Organic berry plantations have been gaining popularity among farmers during recent years. Even so, farmers experience serious challenges in disease control management, which is a concern in organic farming. Phragmidium rubi-idaei (DC) P. Karst is the pathogen responsible for blackberry and raspberry rust disease, one of the most present and active diseases in plantations. The antifungal certified products found on the organic farming market offer the opportunity for an efficient control strategy over plant pathogens in fruit shrub plantations. In this study, 5 natural based products-namely Altosan, Mimox, Canelys, Zitron, and Zeolite-were tested for their fungistatic effect over P. rubi-idaei. The experiments were carried out under laboratory conditions, performing observations over the impact of organic products, used at different concentration levels, on rust conidia germination. Moreover, field experiments were conducted in order to evaluate the efficiency of different treatments for rust control on raspberry ('Polka', 'Veten' and 'Heritage') and blackberry ('Thorn Free', 'Chester' and 'Loch Ness') varieties. Data analysis based on ANOVA tests showed significant differences between the tested variants and the control sample at p < 0.001. Furthermore, LSD test confirmed differences between all substances tested (p < 0.005). The natural products Canelys (formulated with cinnamon) and Zytron (based on citrus extract) have proven the highest inhibitory capacity for conidia germination during in vitro tests registering values of 80.42% and 78.34%, respectively. The same high inhibitory rates against rust pathogen were kept also in the field tests using the same two natural-based products mentioned earlier. In addition, outcomes from this study demonstrated that Zeolite is not recommended for raspberry or blackberry rust control.

Influence of TiO2 Nanoparticles on the Resistance of Cementitious Composite Materials to the Action of Fungal Species.

The development of mold films on the cement surfaces of buildings is a health and safety problem for the population, aesthetic but also in terms of their durability. The use of specific performance of cementitious composites containing TiO2 nanoparticles, photoactivated by UV radiation, can be a viable solution to mitigate to eliminate these problems. The experimental studies presented aim to analyze the capacity to inhibit the development of mold type Aspergillus and Penicillium on the surface of composite materials with nano-TiO2 content and the identification of the optimal range of nanomaterial addition. The identification and analysis of the inhibition halo (zone with a biological load of maximum 1-10 colonies of microorganisms) confirmed the biocidal capacity of the cementitious composites, but also indicated the possibility that an excess of TiO2 nanoparticles in the mixture could induce a development of cell resistance, which would be unfavorable both in terms of behavior and in terms of cost.

Changes in Diversity Due to Long-Term Management in a High Natural Value Grassland.

High nature value (HNV) grassland systems are increasingly important for the ecosystem services they provide and for their socio-economic impact in the current constant-changing context. The aim of our paper is to evaluate the long-term effect of organic fertilizers on HNV systems in the Apuseni Mountains, Romania. As an objective we want to identify the optimal intensity of conservation management and its recognition based on indicator value plant species. The experiments were established in 2001 on the boreal floor and analyze the effect of a gradient of four organic treatments with manure. Fertilization with 10 t ha-1 manure ensures an increase in yield and has a small influence on diversity, and could be a real possibility for the maintenance and sustainable use of HNV. Each fertilization treatment determined species with indicator value that are very useful in the identification and management of HNV. The indicator species are useful in forecasting the fluctuations and successions in grasslands, determined by the modification of the dominance-codominance ratio and the real coverage of each species.

Mycorrhizal Patterns in the Roots of Dominant Festuca rubra in a High-Natural-Value Grassland.

Grassland ecosystems occupy significant areas worldwide and represent a reservoir for biodiversity. These areas are characterized by oligotrophic conditions that stimulate mycorrhizal symbiotic partnerships to meet nutritional requirements. In this study, we selected Festuca rubra for its dominance in the studied mountain grassland, based on the fact that grasses more easily accept a symbiotic partner. Quantification of the entire symbiosis process, both the degree of colonization and the presence of a fungal structure, was performed using the root mycorrhizal pattern method. Analysis of data normality indicated colonization frequency as the best parameter for assessing the entire mycorrhizal mechanism, with five equal levels, each of 20%. Most of the root samples showed an intensity of colonization between 0 and 20% and a maximum of arbuscules of about 5%. The colonization degree had an average value of 35%, which indicated a medium permissiveness of roots for mycorrhizal partners. Based on frequency regression models, the intensity of colonization presented high fluctuations at 50% frequency, while the arbuscule development potential was set to a maximum of 5% in mycorrhized areas. Arbuscules were limited due to the unbalanced and unequal root development and their colonizing hyphal networks. The general regression model indicated that only 20% of intra-radicular hyphae have the potential to form arbuscules. The colonization patterns of dominant species in mountain grasslands represent a necessary step for improved understanding of the symbiont strategies that sustain the stability and persistence of these species.

Optimization of Hermetia illucens (L.) egg laying under different nutrition and light conditions.

The black soldier fly Hermetia illucens is gaining growing interest as a tool for the valorisation of bio-waste in a circular economy perspective. Although a wide variety of studies are available for larvae rearing, the indoor breeding of adults still presents a great challenge for industrial purposes. This study was designed to assess the simultaneous influence of 3 different light sources (the Mix of LED UV:blue:green 1:1:3, White LED, Neon light) and 3 types of nutrition (sugar and water, only water, no sugar no water) on adult performances, obtaining different egg production parameters that included the number and weight of the egg masses and single eggs laid by the females, the duration of pre-oviposition and oviposition period, the adult life span, the hatchability of the eggs. Our results showed that production parameters are influenced mainly by nutrition rather than light factor, although light plays an important secondary role. Moreover, the presence of sugar positively affects the egg production (12,93-27,10 mg eggs/female) and increases oviposition period (18,2-31,8 days) and adult lifespan (20,79-27,11 days). Light sources also affect egg production parameters, with the exposure to the Mix of LEDs resulting in the best performance of flies. Results obtained from this study are very useful for the design and management of an efficient industrial black soldier fly mass rearing process.

Sensitive approach and future perspectives in microscopic patterns of mycorrhizal roots.

The harmonization of methodologies for the assessment of radicular endophytic colonization is a current necessity, especially for the arbuscular mycorrhizas. The functionality of mycorrhizal symbionts for plants can be described only by indicators obtained based on microscopic analysis. That is the reason for which a unifying methodology will lead to the achievement of highly correlated indicators comparable from one research to another. Our proposed methodology can further digitize the microscopic observations of colonization. The MycoPatt system is developed as a methodological framework for obtaining objective and comparable microscopic observations. The horizontal, vertical and transversal indicators are highly adaptable and allow the tracking of mycorrhizal colonization in root length. All structures developed by symbionts can be traced and the obtained metadata can be compared without any transformation. Mycorrhizal maps have a high degree of applicability in evaluating soil inoculum efficiency. In the future, the application of this method will lead to digital maps with a high degree of accuracy. MycoPatt allows the mathematical expression of colonization patterns, being a complex model that converts biological data into statistically comparable indicators. This will further allow obtaining inferences with applicative importance and similarity spectra for the colonizing fungi and host plants.