Synthesis of 2D PtSe2 Nanolayers on Glass Substrates and Their Integration in Near-Infrared Light Shutters.

PtSe2 has asserted its key role among the emerging 2D transition metal dichalcogenides, however, its simplified growth process with controlled number of layers, high crystalline quality, and on inexpensive substrates is still challenging. Here, we report the synthesis details of PtSe2 layers on soda lime glass substrates by selenization of predeposited Pt layers using the thermally assisted conversion method at atmospheric pressure. PtSe2 syntheses are confirmed by X-ray photoelectron spectroscopy and Raman analysis. The layers were further investigated with transmission electron microscopy and optical ellipsometry, revealing the thickness and its dependence on the metal precursor sputtering time. Finally, the integration of PtSe2 as transparent conductive layers in polymer-dispersed liquid crystal structures operating as near-infrared light shutters is demonstrated and device performance is discussed. The proposed simple and inexpensive synthesis approach opens up new directions toward PtSe2 potential technological applications, including ITO-free optoelectronics.

In-line and off-axis polarization-selective holographic lenses recorded in azopolymer thin films via polarization holography and polarization multiplexing.

Polarization-selective diffractive in-line and off-axis lenses are recorded in azopolymer thin films using polarization holography. A simple, yet efficient, and to the best of our knowledge, new method is used to suppress the surface relief grating formation and to improve the polarization properties of the lenses. The in-line lenses are converging for right circularly polarized (RCP) light and diverging for left circularly polarized (LCP) light. Bifocal off-axis lenses are recorded by polarization multiplexing. By rotating the sample at 90° between the exposures, the two focal points of these lenses are located in orthogonal directions O x and O y, so we can refer to these novel lenses as 2D bifocal polarization holographic lenses. The light intensity in their focuses depends on the reconstructing light polarization. According to the recording scheme, they can either reach maximum intensities simultaneously (for LCP or RCP), or alternatively, one of them can be at maximum for LCP, while the other for RCP. These lenses may be used as polarization controllable optical switches, in the field of self-interference incoherent digital holography or for other photonics applications.

Blood Plasma Calorimetric Profiles of Women with Preeclampsia: Effect of Oxidative Stress.

Preeclampsia is a pregnancy-related disease with poor placentation and presents itself through hypertension and proteinuria. The disease is also associated with the oxidative modification of proteins in maternal blood plasma. In this work, we combine differential scanning calorimetry (DSC), capillary electrophoresis, and atomic force microscopy (AFM) to evaluate the changes in the plasma denaturation profiles of patients with preeclampsia (PE) as compared with those of pregnant controls. Our results demonstrate that the last trimester of pregnancy substantially affects the main calorimetric characteristics of blood plasma from pregnant controls relative to nonpregnant women. These variations correlate well with the changes in protein levels determined by electrophoresis. DSC analysis revealed significant deviations in the plasma heat capacity profiles of preeclamptic patients from those of pregnant controls. These alterations are expressed mainly in a substantial reduction in albumin-assigned transitions and an upward shift in its denaturation temperature, lower calorimetric enthalpy changes, and a reduced ratio of heat capacity in the albumin/globulin-assigned thermal transitions, which are more pronounced in severe PE cases. The in vitro oxidation model shows that the alteration of PE thermograms is partly related to protein oxidation. AFM data detected numerous aggregate formations in the plasma of PE samples and fewer small ones in the pregnant controls, which are not found in healthy nonpregnant samples. These findings could serve as a basis for further investigations to reveal the possible relationship between albumin thermal stabilization, the increased inflammatory state and oxidative stress, and protein misfolding in preeclampsia.

Membrane Lesions and Reduced Life Span of Red Blood Cells in Preeclampsia as Evidenced by Atomic Force Microscopy.

Preeclampsia (PE) presents with maternal de novo hypertension and significant proteinuria and is one of the leading causes of maternal and perinatal morbidity and mortality with unknown etiology. The disease is associated with inflammatory vascular response and severe red blood cell (RBC) morphology changes. This study examined the nanoscopic morphological changes of RBCs from PE women versus normotensive healthy pregnant controls (PCs) and non-pregnant controls (NPCs) applying atomic force microscopy (AFM) imaging. The results revealed that the membrane of fresh PE RBCs differed significantly from healthy ones by the presence of invaginations and protrusions and an increased roughness value (Rrms) (4.7 ± 0.8 nm for PE vs. 3.8 ± 0.5 nm and 2.9 ± 0.4 nm for PCs and NPCs, respectively). PE-cells aging resulted in more pronounced protrusions and concavities, with exponentially increasing Rrms values, in contrast to the controls, where the Rrms parameter decreased linearly with time. The Rrms, evaluated on a 2 × 2 µm2 scanned area, for senescent PE cells (13 ± 2.0 nm) was significantly higher (p < 0.01) than that of PCs (1.5 ± 0.2 nm) and NPCs (1.9 ± 0.2 nm). Furthermore, the RBCs from PE patients appeared fragile, and often only ghosts were observed instead of intact cells at 20-30 days of aging. Oxidative-stress simulation on healthy cells led to RBC membrane features similar to those observed for PE cells. The results demonstrate that the most pronounced effects on RBCs in PE patients are related to impaired membrane homogeneity and strongly altered roughness values, as well as to vesiculation and ghost formation in the course of cell aging.

The Effect of Post Deposition Treatment on Properties of ALD Al-Doped ZnO Films.

In this paper, aluminum-doped zinc oxide (ZnO:Al or AZO) thin films are grown using atomic layer deposition (ALD) and the influence of postdeposition UV-ozone and thermal annealing treatments on the films' properties are investigated. X-ray diffraction (XRD) revealed a polycrystalline wurtzite structure with a preferable (100) orientation. The crystal size increase after the thermal annealing is observed while UV-ozone exposure led to no significant change in crystallinity. The results of the X-ray photoelectron spectroscopy (XPS) analyses show that a higher amount of oxygen vacancies exists in the ZnO:Al after UV-ozone treatment, and that the ZnO:Al, after annealing, has a lower amount of oxygen vacancies. Important and practical applications of ZnO:Al (such as transparent conductive oxide layer) were found, and its electrical and optical properties demonstrate high tunability after postdeposition treatment, particularly after UV-Ozone exposure, offers a noninvasive and easy way to lower the sheet resistance values. At the same time, UV-Ozone treatment did not cause any significant changes to the polycrystalline structure, surface morphology, or optical properties of the AZO films.

Altered Mesenchymal Stem Cells Mechanotransduction from Oxidized Collagen: Morphological and Biophysical Observations.

Extracellular matrix (ECM) provides various mechanical cues that are able to affect the self-renewal and differentiation of mesenchymal stem cells (MSC). Little is known, however, how these cues work in a pathological environment, such as acute oxidative stress. To better understand the behavior of human adipose tissue-derived MSC (ADMSC) in such conditions, we provide morphological and quantitative evidence for significantly altered early steps of mechanotransduction when adhering to oxidized collagen (Col-Oxi). These affect both focal adhesion (FA) formation and YAP/TAZ signaling events. Representative morphological images show that ADMSCs spread better within 2 h of adhesion on native collagen (Col), while they tended to round up on Col-Oxi. It also correlates with the lesser development of the actin cytoskeleton and FA formation, confirmed quantitatively by morphometric analysis using ImageJ. As shown by immunofluorescence analysis, oxidation also affected the ratio of cytosolic-to-nuclear YAP/TAZ activity, concentrating in the nucleus for Col while remaining in the cytosol for Col-Oxi, suggesting abrogated signal transduction. Comparative Atomic Force Microscopy (AFM) studies show that native collagen forms relatively coarse aggregates, much thinner with Col-Oxi, possibly reflecting its altered ability to aggregate. On the other hand, the corresponding Young's moduli were only slightly changed, so viscoelastic properties cannot explain the observed biological differences. However, the roughness of the protein layer decreased dramatically, from RRMS equal to 27.95 ± 5.1 nm for Col to 5.51 ± 0.8 nm for Col-Oxi (p < 0.05), which dictates our conclusion that it is the most altered parameter in oxidation. Thus, it appears to be a predominantly topographic response that affects the mechanotransduction of ADMSCs by oxidized collagen.

Platelets' Nanomechanics and Morphology in Neurodegenerative Pathologies.

The imaging and force-distance curve modes of atomic force microscopy (AFM) are explored to compare the morphological and mechanical signatures of platelets from patients diagnosed with classical neurodegenerative diseases (NDDs) and healthy individuals. Our data demonstrate the potential of AFM to distinguish between the three NDDs-Parkinson's disease (PD), amyotrophic lateral sclerosis (ALS) and Alzheimer's disease (AD), and normal healthy platelets. The common features of platelets in the three pathologies are reduced membrane surface roughness, area and height, and enhanced nanomechanics in comparison with healthy cells. These changes might be related to general phenomena associated with reorganization in the platelet membrane morphology and cytoskeleton, a key factor for all platelets' functions. Importantly, the platelets' signatures are modified to a different extent in the three pathologies, most significant in ALS, less pronounced in PD and the least in AD platelets, which shows the specificity associated with each pathology. Moreover, different degree of activation, distinct pseudopodia and nanocluster formation characterize ALS, PD and AD platelets. The strongest alterations in the biophysical properties correlate with the highest activation of ALS platelets, which reflect the most significant changes in their nanoarchitecture. The specific platelet signatures that mark each of the studied pathologies can be added as novel biomarkers to the currently used diagnostic tools.

Morphometric and Nanomechanical Features of Erythrocytes Characteristic of Early Pregnancy Loss.

Early pregnancy loss (EPL) is estimated to be between 15 and 20% of all adverse pregnancies. Approximately, half of EPL cases have no identifiable cause. Herein, we apply atomic force microscopy to evaluate the alteration of morphology and nanomechanics of erythrocytes from women with EPL with unknown etiology, as compared to healthy pregnant (PC) and nonpregnant women (NPC). Freshly isolated erythrocytes from women with EPL differ in both the roughness value (4.6 ± 0.3 nm, p < 0.05), and Young's modulus (2.54 ± 0.6 MPa, p < 0.01) compared to the values for NPC (3.8 ± 0.4 nm and 0.94 ± 0.2 MPa, respectively) and PC (3.3 ± 0.2 nm and 1.12 ± 0.3 MPa, respectively). Moreover, we find a time-dependent trend for the reduction of the cells' morphometric parameters (cells size and surface roughness) and the membrane elasticity­much faster for EPL than for the two control groups. The accelerated aging of EPL erythrocytes is expressed in faster morphological shape transformation and earlier occurrence of spiculated and spherical-shaped cells, reduced membrane roughness and elasticity with aging evolution. Oxidative stress in vitro contributed to the morphological cells' changes observed for EPL senescent erythrocytes. The ultrastructural characteristics of cells derived from women with miscarriages show potential as a supplementary mark for a pathological state.

Anisotropic Optical Response of WTe2 Single Crystals Studied by Ellipsometric Analysis.

In this paper we report the crystal growth conditions and optical anisotropy properties of Tungsten ditelluride (WTe2) single crystals. The chemical vapor transport (CVT) method was used for the synthesis of large WTe2 crystals with high crystallinity and surface quality. These were structurally and morphologically characterized by means of X-ray diffraction, optical profilometry and Raman spectroscopy. Through spectroscopic ellipsometry analysis, based on the Tauc-Lorentz model, we identified a high refractive index value (~4) and distinct tri-axial anisotropic behavior of the optical constants, which opens prospects for surface plasmon activity, revealed by the dielectric function. The anisotropic physical nature of WTe2 shows practical potential for low-loss light modulation at the 2D nanoscale level.

ALD Deposited ZnO:Al Films on Mica for Flexible PDLC Devices.

In this work, highly conductive Al-doped ZnO (AZO) films are deposited on transparent and flexible muscovite mica substrates by using the atomic layer deposition (ALD) technique. AZO-mica structures possess high optical transmittance at visible and near-infrared spectral range and retain low electric resistivity, even after continuous bending of up to 800 cycles. Structure performances after bending tests have been supported by atomic force microscopy (AFM) analysis. Based on performed optical and electrical characterizations AZO films on mica are implemented as transparent conductive electrodes in flexible polymer dispersed liquid crystal (PDLC) devices. The measured electro-optical characteristics and response time of the proposed devices reveal the higher potential of AZO-mica for future ITO-free flexible optoelectronic applications.

A Surface Plasmon Resonance Biosensor Based on Directly Immobilized Hemoglobin and Myoglobin.

Immobilization of proteins on a surface plasmon resonance (SPR) transducer is a delicate procedure since loss of protein bioactivity can occur upon contact with the untreated metal surface. Solution to the problem is the use of an immobilization matrix having a complex structure. However, this is at the expense of biosensor selectivity and sensitivity. It has been shown that the matrix-assisted pulsed laser evaporation (MAPLE) method has been successfully applied for direct immobilization (without a built-in matrix) of proteins, preserving their bioactivity. So far, MAPLE deposition has not been performed on a gold surface as required for SPR biosensors. In this paper we study the impact of direct immobilization of heme proteins (hemoglobin (Hb) and myoglobin (Mb)) on their bioactivity. For the purpose, Hb and Mb were directly immobilized by MAPLE technique on a SPR transducer. The bioactivity of the ligands immobilized in the above-mentioned way was assessed by SPR registration of the molecular reactions of various Hb/Mb functional groups. By SPR we studied the reaction between the beta chain of the Hb molecule and glucose, which shows the structural integrity of the immobilized Hb. A supplementary study of films deposited by FTIR and AFM was provided. The experimental facts showed that direct immobilization of an intact molecule was achieved.