RESUMEN
S-doped nickel molybdate nanorods grown on nickel foam (S-NiMoO4/NF) were fabricated by a two-step hydrothermal method. The resultant S-NiMoO4/NF exhibited remarkable bifunctional electrocatalytic activity, with overpotentials of 235 mV for the hydrogen evolution reaction and 150 mV for the oxygen evolution reaction at a current density of 50 mA cm-2. Assembled into the two-electrode S-NiMoO4/NF electrolyzer in alkaline electrolytes for overall water splitting, it required only low cell voltages of 1.55 V and 1.63 V to drive 50 mA cm-2 and 100 mA cm-2, respectively. No significant performance degradation occurred during the water electrolysis process. The experimental results confirmed that S-doping induced the increase of the oxygen vacancies, accelerating the reaction kinetics and thus improving the electrocatalytic performance. Meanwhile, more active sites exposure on the surface of S-NiMoO4/NF enhanced the reactivity. This work may guide the development of efficient bifunctional catalysts in alkaline electrolysis through oxygen vacancy regulation.
RESUMEN
Hydrogen (H2) evolution by photocatalytic water splitting is a potential strategy to solve worldwide energy shortage. Sulfide nanocatalysts showed great potential for H2 evolution, but suffered from low charge separation efficiency and easy agglomeration. In this work, ZnIn2S4 (ZIS) nanoflowers were anchored onto the surface of halloysite nanotubes (HNTs) modified by ethylenediaminetetraacetic acid (EDTA). Photocatalyst 3ZnIn2S4-HNTs/EDTA3 (3ZIS-HNTs/E3) displayed the optimum H2 evolution rate of 10.4 mmol·g-1·h-1, being 3.4 times as that of the original ZIS. Moreover, 3ZIS-HNTs/E3 presented satisfied property in the photocatalytic hydrogenation reaction of 4-nitrophenol to produce 4-aminophenol. HNTs as substrates not only hindered the growth and agglomeration of ZIS, but also induced more S vacancies in ZIS. The production of Schottky junctions between ZIS and Pt, the high utilization of light energy in tubular HNTs, and the trapping effect of EDTA for photogenerated h+ were all favorable for enhancing the catalytic property. The density functional theory (DFT) calculations showed that 3ZIS-HNTs/E3 with more S vacancies had the lowest adsorption energy and the most appropriate ΔGH* for H* to enhance the H2 evolution efficiency, which was consistent with the experimental catalytic results. This study contributes a novel thought for synthesizing composites on the basis of natural minerals for taking part in and enhancing the catalytic performance.
RESUMEN
This work reports a new type of platinum-based heterostructural electrode catalyst that highly dispersed PtCo alloy nanoparticles (NPs) confined in cobalt benzoate (Co-BA) nanowires are supported on a nitrogen-doped ultra-thin carbon nanosheet/Fe3C hybrid (PtCo@Co-BA-Fe3C/NC) to show high electrochemical activity and long-term stability. One-dimensional Co-BA nanowires could alleviate the shedding and agglomeration of PtCo alloy NPs during the reaction so as to achieve satisfactory long-term durability. Moreover, the synergistic effect at the interface optimizes the surface electronic structure and prominently accelerates the electrochemical kinetics. The oxygen reduction reaction half-wave potential is 0.923 V, and the oxygen evolution reaction under the condition of 10 mAâ¢cm-2 is 1.48 V. Higher power density (263.12 mWâ¢cm-2), narrowed voltage gap (0.49 V), and specific capacity (808.5 mAhâ¢g-1) for PtCo@Co-BA-Fe3C/NC in Zn-air batteries are achieved with long-term cycling measurements over 776 h, which is obviously better than the Pt/C + RuO2 catalyst. The interfacial electronic interaction of PtCo@Co-BA-Fe3C/NC is investigated, which can accelerate electron transfer from Fe to Pt. Density functional theory calculations also indicate that the interfacial potential regulates the binding energies of the intermediates to achieve the best performance.
RESUMEN
Environmental-friendly biochar (BC) with low cost was obtained by simple pyrolysis of corn stalk core, which was employed as an adsorbent for efficiently removing organic pollutants in water. The physicochemical properties of BCs were characterized by various techniques, including X-ray diffractometer (XRD), Fourier transforms infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), Raman, Thermogravimetric (TGA), N2 adsorption-desorption and zeta potential tests. The influence of pyrolysis temperature on the structure and adsorption efficiency of the adsorbent was emphasized. The graphitization degree and sp2 carbon content of BCs were enhanced by increasing the pyrolysis temperature, which was favorable for the enhancement of the adsorption efficiency. The adsorption results showed that corn stalk core calcined at 900 °C (BC-900) displayed exceptional adsorption efficiency toward bisphenol A (BPA) in wide pH (1-13) and temperature (0-90 °C) ranges. Moreover, adsorbent BC-900 could adsorb various pollutants from water, including antibiotics, organic dyes, and phenol (50 mg·L-1). The adsorption process of BPA over BC-900 matched well with the Langmuir isotherm and pseudo-second-order kinetic model. Mechanism investigation suggested that large specific surface area and pore filling acted the foremost role in the adsorption process. Adsorbent BC-900 has the potential application in wastewater treatment due to its simple preparation, low cost, and excellent adsorption efficiency.
Asunto(s)
Contaminantes Químicos del Agua , Zea mays , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del Agua/análisis , Carbón Orgánico/química , Fenoles , Adsorción , Cinética , AguaRESUMEN
This work reported on the development of CoFe2O4-BiVO4 photoanode based photoelectrocatalytic system collaborating with peroxymonosulfate activation for organic contaminants removal. CoFe2O4 layer not only provided active sites for direct peroxymonosulfate activation but also accelerated charge separation process for the enhancement of photocurrent density and photoelectrocatalytic performance. Junction of CoFe2O4 layer on BiVO4 photoanode led to the improvement of photocurrent density to 4.43 mA/cm2 at 1.23 VRHE, which was approximately 4.06 times higher than that of pure BiVO4. Subsequently, the corresponding optimal degradation efficiency toward the tetracycline model contaminant achieved to be 89.1% with total organic carbon removal value of about 43.7% within 60 min. Moreover, the degradation rate constant of CoFe2O4-BiVO4 photoanode in photoelectrocatalytic system was 0.037 min-1, which was about 1.23, 2.64 and 3.70 times higher than the values in photocatalysis, electrocatalysis and PMS only based systems, respectively. In addition, radical scavenging experiments and electron spin resonance spectra indicated a synergy of radical and nonradical coupling process where â¢OH and 1O2 played vital roles during tetracycline degradation. Plausible photoelectrocatalytic mechanism and degradation pathway were proposed. This work provided an effective strategy to construct peroxymonosulfate assisted photoelectrocatalytic system toward green environmental applications.
RESUMEN
Improving the charge separation and migration in graphitic carbon nitride (CN) is the critical issue to enhance its photocatalytic performance, but still remains very challenging. Herein, the alkali metals were introduced into the interlayer and intralayer of CN to tackle this challenge. The lithium sodium-modifying carbon nitride layer (LiNaCN2) and the adjacent CN layer formed a van der Waals heterostructures (VDWHs), while the potassium-intercalating served as interlayer charge transfer channels to induce the directional charge flow. Experiments and theoretical calculations indicated that such unique construction provided intrinsic driving force to obtain the electrons from LiNaCN2 to CN via directional potassium channels. In accordance with the theoretical prediction, a dramatically red-shift of the light absorption feature was achieved for interlayer potassium-intercalating and intralayer lithium sodium-modifying co-functionalized carbon nitride (LiNaCN-K-CN2) to show narrowed bandgap energy of 2.15 eV. This directional charge flow in CN resulted in the rapid transfer of charge carriers in both interlayer as well as intralayer of CN, which reduced the electronic localization as well as extended the π conjugative effect. Consequently, the LiNaCN-K-CN2 displayed stable and remarkable hydrogen production rate of about 2.46 mmol g-1 h-1 with apparent quantum yield (AQY) of about 13.68% at 435 nm, which was 22 folds higher than that of the pristine CN. This finding provides the feasible strategy to precisely tune the directions of charge transfer for high-performance CN-based photocatalysts.
RESUMEN
Sustainable Fe2 O3 /SnO2 with fine interfacial feature derived from FeSnO(OH)5 was prepared and employed for elimination contaminants. The synergistic effect between Fe2 O3 and SnO2 endowed a remarkable degradation performance for tetracycline degradation. Well dispersed SnO2 can function as fine protective layer to enhance the anchoring of iron ions. In addition, SnO2 with excellent conductivity can accelerate electron transfer on the surface of Fe2 O3 , further activation PMS. Approximately 89.3% of tetracycline (TC) was removed in Fe2 O3 /SnO2 /PMS system, which was higher than alone Fe2 O3 /PMS (73.2%) and SnO2 /PMS (39.7%) systems. The operating parameters were evaluated and studied. Electron paramagnetic resonance (EPR) and quenching tests manifested that 1 O2 was primary active specie, and â OH, â SO4 - and â O2 - were participated in the degradation process. Besides, degradation pathways were proposed by identifying the intermediate products. This work is expected to offer a potential design for construction eco-friendly heterogeneous catalyst toward wastewater treatment.
Asunto(s)
Antibacterianos , Peróxidos , Antibacterianos/farmacología , Tetraciclina/farmacología , HierroRESUMEN
The realization of durable and efficient oxygen evolution reactions (OER) at large current densities and low overpotentials is of significant importance but remains a great challenge. In this study, a CoFe/Co0.2Fe0.8S@NS-CNTs/CC (CF/CFS@NS-CNTs/CC) heterogeneous structure was fabricated by isolating CoFe/Co0.2Fe0.8S (CF/CFS) particles locked in nitrogen/sulfur codoped carbon nanotubes (NS-CNTs). Appreciable oxygen evolution reaction activity and durability was achieved with an ultralow overpotential of 110 mV at 10 mAâ¢cm-2. The operation was stable for 300 h at a current density of 500 mAâ¢cm-2. The structure was then assembled into a zinc-air battery (ZAB), which delivered a high power density of 194 mWâ¢cm-2, a specific capacity of 837.3 mAhâ¢gZn-1, and stable operation for 788 h without obvious voltage attenuation and altered morphology. The electronic interactions were studied by X-ray photoelectron spectroscopy (XPS), which revealed that both the bimetal components and the synergistic effect at the interface stimulated the transfer of Co and Fe sites to higher chemical valence states. Theoretical calculations indicated that the synergistic effect of the bimetal components, build-in interfacial potential, and surface chemical reconstruction adjusted the Fermi level to optimize the thermodynamic formation of O* to OOH*, thus enhancing the intrinsic activity.
RESUMEN
A series of ZnmIn2S3+m photocatalysts were synthesized to show tunable band gap energy with the variation of Zn/S atomic ratio. The junction of ZnmIn2S3+m and BiVO4 led to intimate interfacial contacts. Both experimental and theoretical results implied that electrons flowed from ZnmIn2S3+m to BiVO4 at the ZnmIn2S3+m/BiVO4 interface to form built-in electric field due to the variation of Fermi level, which promised Z scheme charge transfer feature for improving separation of charge carriers for enhanced photocatalytic performance. A higher degree of charge transfer process occurred for Zn2In2S5/BiVO4 heterostructure promised stronger built-in electric field, higher charge separation efficiency and improved photocatalytic activity in comparison to ZnIn2S4/BiVO4 and Zn3In2S6/BiVO4 heterojunctions. The optimal hydrogen production rate of Zn2In2S5/BiVO4 photocatalyst is 8.42 mmolâ¢g-1â¢h-1 with apparent quantum yield of 22.32 % at 435 nm, which is about 2.2 and 1.5 times higher than that of ZnIn2S4/BiVO4 and Zn3In2S6/BiVO4, respectively.
RESUMEN
Potential leaching of Co ions could decrease the catalytic activity and cause secondary pollution of water, thereby threatening ecological safety and human health. In response, the in-situ generation of well-dispersed Co2SnO4 and SnO2 with fine interfacial feature was constructed for PMS activation toward efficient tetracycline degradation and lower cobalt ion leaching feature. The synergistic effect of Co2SnO4 and SnO2 endowed Co2SnO4-SnO2 an outstanding catalytic performance for tetracycline degradation in alkaline condition. Meanwhile, the catalysts can effectively degrade the quinolones, dyes and mixture pollutant solution. The excellent performance can attributed to the in-situ introduction of SnO2, which stabilizes the microstructure and provides an effective electronic pathway to enhance the activity of Co2SnO4 in the Co2SnO4-SnO2. In optimized condition, the tetracycline degradation efficiency was enhanced to 94.9% within 20 min and maintained the stability at least four cycles. The degradation rate constant of Co2SnO4-SnO2 was 0.149 min-1, which was about 1.93, 2.98, 11.5 times higher than of Co2SnO4, Co3O4 and SnO2, respectively. Notably, the leaching performance of Co2SnO4-SnO2 was greatly suppressed to be 7.45 ug/L, which was lower than that of Co2SnO4 (6.41 mg/L) and Co3O4 (1.12 mg/L). Radical quenching and EPR experiments showed that singlet oxygen (1O2), rather than hydroxyl active species and sulfate radicals, played a predominating role for PMS activation in the Co2SnO4-SnO2/PMS system. The intermediates and degradation routes for tetracycline degradation were characterized by liquid chromatograph-tandem mass spectrometry. This study expected to provide a novel strategy to construct heterostructural catalysts with lower cobalt ion leaching for the activation of PMS.
Asunto(s)
Antibacterianos , Estaño , Cobalto/química , Humanos , Óxidos/química , Peróxidos/química , TetraciclinaRESUMEN
A phosphorus and fluorine co-doped carbon nitride (PF-CN) photocatalyst was synthesized to modulate the band gap structure, visible light response ability and photocatalytic H2 evolution activity. Experimental results demonstrated that the electronic structure of g-C3N4 was regulated by phosphorus replacing the C site and fluorine substituting the N site in the g-C3N4 framework to form P-N species and C-F bonds, respectively. P- and F-co-doped carbon nitride gave rise to a more negative conduction band potential, larger surface area, efficient separation of photogenerated charge carriers and a faster charge transfer rate, contributing to an enhancement of photocatalytic H2 production activity. PF-CN achieved an optimal H2 evolution activity of 1690.56 µmol g-1 which was 17.83 times higher with respect to that of pristine g-C3N4 (94.81 µmol g-1). Meanwhile, PF-CN achieved the highest apparent quantum efficiency of 3.76% at 435 nm.
RESUMEN
It is crucial to develop more effective photocatalysts in the field of clean environment. In response, the S-scheme BiVO4/g-C3N4 heterojunction modified by in situ reduced non-noble metal Bi nanoparticles was used to synergistically degrade formaldehyde under full spectral irradiation. The results, that investigated by careful characterizations and density functional theory (DFT) calculations, proved that BiVO4/g-C3N4 form an S-scheme heterojunction, which can effectively improve the separation efficiency of photogenic carriers and maintain the original strong redox capability of semiconductor materials. The SPR effect of Bi elemental substance enhanced the optical response and provided more oxidative species. Thus, the photocatalytic activity of BiVO4/Bi/g-C3N4 was significantly improved through their joint efforts, that the degradation efficiency of HCHO (800 ppm) for 6 h is 96.39% under 300 W Xenon lamp without filter with the pseudo-second-order rate constant of 4.16 ppm-1·h-1 and CO2 selectivity of 98.41%. Surprisingly, the degradation efficiency also reached to 49.35% and 32.23% under visible and near-infrared light irradiation, respectively. Moreover, we also tested its photocatalytic decomposition effect on formaldehyde in coatings, indicating that it has a broad prospect in future coatings applications. This study may provide an expected photocatalyst, an efficient non-noble metal modified S-scheme heterojunction, to degrade volatile organic gases under a broad spectrum light.
RESUMEN
In this work, Ag/BiVO4 heterostructural photocatalysts were developed in order to reveal exceptional structural-dependent photoinduced charge migration kinetics as well as the underlying photocatalytic antibacterial dynamic process. The structure-dependent interface of BiVO4 and Ag nanoparticles was successfully constructed to improve the photoinduced interface charge transfer efficiency and interface correlation. DFT calculation indicated that a net charge of about 0.33 e between Ag and tz-BiVO4 was achieved by extraordinary interface charge transfer, being far larger than that between Ag and ms-BiVO4. Larger net charge has consequences on mobility of charge carriers of tz-BiVO4 that can raise the migration and separation of charge carriers for Ag/tz-BiVO4 heterojunction. Fine interfacial contact between Ag and tz-BiVO4 led to the optimized photocatalytic performance toward E. coli inactivation, being predominately higher than that of tz-BiVO4, ms-BiVO4, and Ag/ms-BiVO4 catalysts. Besides photocatalytic activity, the thermocatalytic inactivation activity of Ag/tz-BiVO4 also exhibited a factor of about 7.2 and 3.1 times higher than that of tz-BiVO4 and Ag/ms-BiVO4. Trapping and EPR measurements suggested that the structural-dependent photocatalytic activity of Ag/BiVO4 mainly originated from the pronounced variation of the capability to produce H2O2 active species, where the capability of generating H2O2 over Ag/tz-BiVO4 is highly accelerated. Moreover, it cannot be ignored that this study provides an ideal candidate for many aspects, such as environmental and water pollution caused by pathogenic microorganisms and disinfection of medical materials, food packaging, household materials, and public places, etc.
RESUMEN
Cyano- and urea-defective group co-modified nitrogen-deficient carbon nitride with PtSn as a cocatalyst was constructed to optimize the optical and electronic structure as well as the photocatalytic activity. Defective engineering over carbon nitride gave rise to a stronger light absorption in the visible and near-infrared regions, more negative conduction band edge potential and more efficient separation behavior of photogenerated charge carriers. The optimal photocatalyst exhibited a high hydrogen yield of 2.96 mmol g-1 h-1 with an apparent quantum yield of 8.42% at 435 nm. Moreover, the photocatalytic hydrogen generation capability was maintained under illumination up to 765 nm with an apparent quantum yield of 0.076%.
RESUMEN
Herein, a series of defect-rich tin oxides, SnxOy, were synthesized with tunable Sn2+/Sn4+ composition ratio and defect chemistry, aiming to explore the impact of local structural modulation, non-stoichiometric chemistry, and defective center on the modulation of band gap values, band edge potential positions, and photocatalytic hydrogen evolution performance. The phase structure, morphology, surface component, and photoelectric properties were analyzed by multiple testing methods. The modulation of the Sn2+/Sn4+ molar ratio was analyzed by X-ray photoelectron spectroscopy and the spectra of Mossbauer and electron spin resonance, which indicated the existence of interstitial tin and oxygen vacancy, predicting a highly disordered local structure. In addition, the photocatalytic activity was evaluated by water splitting for hydrogen production under visible light. The optimal photocatalytic activity toward H2 production rate reached 58.6 µmol·g-1·h-1 under visible light illumination. However, the photocatalytic activity gradually decreased with an increase of synthetic temperature. Much higher Sn2+/Sn4+ molar ratio in the present defective tin oxide gave rise to more negative band edge potentials for hydrogen production. Meanwhile, the driving force was decreased with the diminished Sn2+. Large amounts of hydroxyl groups, Sn2+, and relatively negative potential of conduction band in non-stoichiometric SnxOy play critical roles in visible light harvesting and photocatalytic water splitting. Furthermore, the relationships among crystal structure, electronic properties, and photocatalytic activities were clarified by theoretical calculation. This work provides a novel strategy for the development of highly efficient photocatalytst by regulating the internal electronic structure and surface defects.
RESUMEN
Increasing long-term photostability of BiVO4 photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO4 junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO4 and NiOOH/electrolyte junctions. Further, adding Fe2+ into the borate buffer electrolyte alleviates the active but unstable character of etched-NiOOH/BiVO4 , leading to an outstanding oxygen evolution over 200â h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the inâ situ generation of the NiFe OEC over long-term durability.
RESUMEN
In this work, we report on the preparation of silver nanoparticles modified bismuth/bismuth vanadate (Bi°-BiVO4) catalyst with multi-active sites toward efficient reduction of aromatic nitrobenzene, aiming to tailor the synergistic effects of multi-active sites and specify the underlying catalytic mechanism. The as-prepared catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray and X-ray photoelectron spectroscopy. It is observed that Ag nanoparticles with diameter of Ë30 nm were anchored evenly on the surface of rod-shaped BiVO4, which offered multi-active sites to contact with the reactants effectively and transfer interfacial electron to 4-nitrophenol (4-NP) rapidly. The activity factor k of Ag/Bi°-BiVO4 for 4-NP reduction is estimated to Ë3933.4 min-1 g-1, which is much higher than that obtained from pristine BiVO4 catalyst, Bi° and noble metal Ag nanoparticles. According to the experimental results, the reaction mechanism and reaction path of 4-NP reduction for BiVO4, Bi and Ag were studied through the density functional theory (DFT) theoretical calculation, which suggested that they exhibit synergistic catalytic effect in the reaction process. This work may provide a feasible foundation for the mechanism research of semiconductor reduction to 4-nitrophenol.
RESUMEN
With the aim of exploring and modulating the interfacial charge kinetics, a ternary g-C3N4/Ag/BiVO4 was constructed with excellent photocatalytic performance and preferable stability toward H2 evolution in absence of cocatalyst. Both density functional theory (DFT) and experimental results implied that the type II g-C3N4/BiVO4 composite can be switched to Z-scheme via Ag nanoparticles as the electron shuttle. The optimal photocatalytic H2 yield rate achieved for g-C3N4/Ag/BiVO4 was 57.4⯵mol·g-1·h-1, being far surpassed the H2 harvest rate of g-C3N4/BiVO4, Ag/g-C3N4 and g-C3N4, which is 2.9, 14.8 and 1.7⯵mol·g-1·h-1, respectively. The apparent quantum efficiency of g-C3N4/Ag/BiVO4 photocatalyst was also determined to be 1.23%. Besides, the photocatalytic performance of g-C3N4/Ag/BiVO4 well preserved over 5 runs in 50â¯h. The improved H2 production performance is considered as the consequence of promoted segregation of photoexcited charge carriers and SPR effects of Ag nanoparticles. In combination with photocurrent measurement, examination of active species and DFT calculation, it is found that Ag nanoparticles as an electron mediator can highly promote the Z-scheme carrier migration that electrons come from conduction band of BiVO4 will quickly assemble with the photo-induced holes from valence band of g-C3N4, leaving electrons in the conduction band of g-C3N4 and holes in valence band of BiVO4 that could greatly enhance the charge separation efficiency.
RESUMEN
Tin niobate photocatalysts with the phase structures of froodite (SnNb2O6) and pyrochlore (Sn2Nb2O7) were obtained by a facile solvothermal method in order to explore the impact of phase structure and electronic structure on the charge kinetics and photocatalytic performance. By employing tin niobate as a model compound, the effects of phase structure over electronic structure, photocatalytic activity toward methyl orange solution and hydrogen evolution were systematically investigated. It is found that the variation of phase structure from SnNb2O6 to Sn2Nb2O7 accompanied with modulation of particle size and band edge potentials that has great consequences on photocatalytic performance. In combination with the electrochemical impedance spectroscopy (EIS), transient photocurrent responses, transient absorption spectroscopy (TAS), and the analysis of the charge-carrier dynamics suggested that variation of electronic structure has great impacts on the charge separation and transfer rate of tin niobate photocatalysts and the subsequent photocatalytic performance. Moreover, the results of the X-ray photoelectron spectroscopy (XPS) indicated that the existent of Sn4+ species in Sn2Nb2O7 could result in a decrease in photocatalytic activity. Photocatalytic test demonstrated that the SnNb2O6 (froodite) catalyst possesses a higher photocatalytic activity toward MO degradation and H2 evolution compared with the sample of Sn2Nb2O7 (pyrochlore). On the basis of spin resonance measurement and trapping experiment, it is expected that photogenerated holes, O2-â¢, and OH⢠active species dominate the photodegradation of methyl orange.
RESUMEN
In this work, we report on the synthesis of nitrogen doped SrTiO3 nanoparticles with efficient visible light driven photocatalytic activity toward Cr(VI) by the solvothermal method. The samples are carefully characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy and photocatalytic test. It is found that nitrogen doping in SrTiO3 lattice led to an apparent lattice expansion, particle size reduction as well as subsequent increase of Brunner-Emmet-Teller surface area. The visible light absorption edge and intensity can be modulated by nitrogen doping content, which absorption edge extends to about 600 nm. Moreover, nitrogen doping can not only modulate the visible light absorption feature, but also have consequence on the enhancement of charge separation efficiency, which can promote the photocatalytic activity. With well controlled particle size, Brunner-Emmet-Teller surface area, and electronic structure via nitrogen doping, the photocatalytic performance toward Cr(VI) reduction of nitrogen doped SrTiO3 was optimized at initial hexamethylenetetramine content of 2.