Emission in the Biological Window from AIE-Based Carbazole-Substituted Furan-Based Compounds for Organic Light-Emitting Diodes and Random Lasers.

The emission quenching observed in devices utilizing luminescent materials such as solid thin films is a prevalent issue. Consequently, searching for new organic luminescent compounds exhibiting aggregation-induced emission (AIE) behavior and characterized by relatively simple and cost-effective synthesis is of crucial interest among applications from optoelectronics and organic lasing branches. Herein, we report the optical properties of three furan-based carbazole-substituted compounds, namely, tBuCBzSO2Ph, tBuCBzSPh, and tBuCbzTCF, exhibiting the aforementioned AIE phenomenon. The optical properties of dyes were determined in classical spectroscopic experiments supported by quantum-chemical calculations. The thermal investigations and electrochemical properties of dyes were performed to verify their usefulness in the construction of organic light-emitting diodes (OLEDs). In pursuit of this objective, OLEDs with a different design were fabricated, and their performance was subject to evaluation. In more detail, the different design strategies relying on the utilization of neat-dye films, as well as the preparation of dye-doped poly(9-vinylcarbazole):2-(4-tert-butylphenyl)-5-(4-biphenylyl)-1,3,4-oxadiazole (PVK:PBD) matrices were examined. The analysis that was conducted indicated the superior potential of tBuCBzSPh for optoelectronic applications. Notably, the positive impact of the AIE effect on the emission of the OLEDs and the ability to establish the lasing phenomenon in asymmetric, poly(methyl methacrylate) (PMMA)-doped polymeric slab waveguides were verified. The study showed that the combination of the strong intramolecular charge transfer (ICT) effect with dye aggregation enables the tuning of the emission of the OLED toward the first biological window, making examined dyes promising candidates for biomedical purposes. The same optical region can be attained for laser emission at relatively low pumping conditions, reaching as low as 7.3 kW of optical power for the tBuCBzSO2Ph compound.

Single-Molecule Fluorescence Probes Interactions between Photoactive Protein-Silver Nanowire Conjugate and Monolayer Graphene.

In this work, we apply single-molecule fluorescence microscopy and spectroscopy to probe plasmon-enhanced fluorescence and Förster resonance energy transfer in a nanoscale assemblies. The structure where the interplay between these two processes was present consists of photoactive proteins conjugated with silver nanowires and deposited on a monolayer graphene. By comparing the results of continuous-wave and time-resolved fluorescence microscopy acquired for this structure with those obtained for the reference samples, where proteins were coupled with either a graphene monolayer or silver nanowires, we find clear indications of the interplay between plasmonic enhancement and the energy transfer to graphene. Namely, fluorescence intensities calculated for the structure, where proteins were coupled to graphene only, are less than for the structure playing the central role in this study, containing both silver nanowires and graphene. Conversely, decay times extracted for the latter are shorter compared to a protein-silver nanowire conjugate, pointing towards emergence of the energy transfer. Overall, the results show that monitoring the optical properties of single emitters in a precisely designed hybrid nanostructure provides an elegant way to probe even complex combination of interactions at the nanoscale.

Aligned silver nanowires for plasmonically-enhanced fluorescence detection of photoactive proteins in wet and dry environment.

We developed a method of aligning silver nanowires in a microchannel and fixing them to glass substrates via appropriate functionalization. The attachment of nanowires to the substrate is robust with no variation of their angles over minutes. Specific conjugation with photoactive proteins is observed using wide-field fluorescence imaging in real-time for highly concentrated protein solution, both in a microchannel and in a chip geometry. In the latter case we can detect the presence of the proteins in the dropcasted solution down to single proteins. The results point towards possible implementation of aligned silver nanowires as geometrically defined plasmonic fluorescence sensing platforms.

Controlling of Photophysical Behavior of Rhenium(I) Complexes with 2,6-Di(thiazol-2-yl)pyridine-Based Ligands by Pendant π-Conjugated Aryl Groups.

The structure-property correlations and control of electronic excited states in transition metal complexes (TMCs) are of high significance for TMC-based functional material development. Within these studies, a series of Re(I) carbonyl complexes with aryl-substituted 2,6-di(thiazol-2-yl)pyridines (Arn-dtpy) was synthesized, and their ground- and excited-state properties were investigated. A number of condensed aromatic rings, which function as the linking mode of the aryl substituent, play a fundamental role in controlling photophysics of the resulting [ReCl(CO)3(Arn-dtpy-κ2N)]. Photoexcitation of [ReCl(CO)3(Arn-dtpy-κ2N)] with 1-naphthyl-, 2-naphthyl-, 9-phenanthrenyl leads to the population of 3MLCT. The lowest triplet state of Re(I) chromophores bearing 9-anthryl, 2-anthryl, 1-pyrenyl groups is ligand localized. The rhenium(I) complex with appended 1-pyrenyl group features long-lived room temperature emission attributed to the equilibrium between 3MLCT and 3IL/3ILCT. The excited-state dynamics in complexes [ReCl(CO)3(9-anthryl-dtpy-κ2N)] and [ReCl(CO)3(2-anthryl-dtpy-κ2N)] is strongly dependent on the electronic coupling between anthracene and {ReCl(CO)3(dtpy-κ2N)}. Less steric hindrance between the chromophores in [ReCl(CO)3(2-anthryl-dtpy-κ2N)] is responsible for the faster formation of 3IL/3ILCT and larger contribution of 3ILCTanthracene→dtpy in relation to the isomeric complex [ReCl(CO)3(9-anthryl-dtpy-κ2N)]. In agreement with stronger electronic communication between the aryl and Re(I) coordination centre, [ReCl(CO)3(2-anthryl-dtpy-κ2N)] displays room-temperature emission contributed to by 3MLCT and 3ILanthracene/3ILCTanthracene→dtpy phosphorescence. The latter presents rarely observed phenomena in luminescent metal complexes.

Impact of the Anthryl Linking Mode on the Photophysics and Excited-State Dynamics of Re(I) Complexes [ReCl(CO)3(4'-An-terpy-κ2N)].

Rhenium(I) complexes with 2,2':6',2″-terpyridines (terpy) substituted with 9-anthryl (1) and 2-anthryl (2) were synthesized, and the impact of the anthryl linking mode on the ground- and excited-state properties of resulting complexes [ReCl(CO)3(4'-An-terpy-κ2N)] (An─anthryl) was investigated using a combination of steady-state and time-resolved optical techniques accompanied by theoretical calculations. Different attachment positions of anthracene modify the overlap between the molecular orbitals and thus the electronic coupling of the anthracene and {ReCl(CO)3(terpy-κ2N)} chromophores. Following the femtosecond transient absorption, the lowest triplet excited state of both complexes was found to be localized on the anthracene chromophore. The striking difference between 1 and 2 concerns the triplet-state formation dynamics. A more planar geometry of 2-anthryl-terpy (2), and thus better electronic communication between the anthracene and {ReCl(CO)3(terpy-κ2N)} chromophores, facilitates the formation of the 3An triplet state. In steady-state photoluminescence spectra, the population ratio of 3MLCT and 3An was found to be dependent not only on the anthryl linking mode but also on solvent polarity and excitation wavelengths. In dimethyl sulfoxide (DMSO), compounds 1 and 2 excited with λexc > 410 nm show both 3MLCT and 3An emissions, which are rarely observed. Additionally, the abilities of the designed complexes for 1O2 generation and light emission under the external voltage were preliminary examined.

Controlling plasmon propagation and enhancement via reducing agent in wet chemistry synthesized silver nanowires.

Silver nanowires with varying diameters and submillimeter lengths were obtained by changing a reducing agent used during hydrothermal synthesis. The control over the nanowire diameter turns out to play a critical role in determining their plasmonic properties, including fluorescence enhancement and surface plasmon polariton propagation. Advanced fluorescence imaging of hybrid nanostructures assembled of silver nanowires and photoactive proteins indicates longer propagation lengths for nanowires featuring larger diameters. At the same time, with increasing diameter of the nanowires, we measure a substantial reduction of fluorescence enhancement. The results point at possible ways to control the influence of plasmon excitations in silver nanowires by tuning their morphology.

Real-time fluorescence sensing of single photoactive proteins using silver nanowires.

We demonstrate that single functionalized silver nanowires form a geometric platform suitable for efficient real-time detection of single photoactive proteins. By collecting series of images using wide-field fluorescence microscopy, events of single protein attachment can be distinguished with the signal to noise ratio further improved by fluorescence enhancement due to plasmon excitations in the nanowires. The enhancement is evidenced by strong shortening of the fluorescence decay of single photoactive proteins conjugated to the silver nanowires.

Silver Island Film for Enhancing Light Harvesting in Natural Photosynthetic Proteins.

The effects of combining naturally evolved photosynthetic pigment-protein complexes with inorganic functional materials, especially plasmonically active metallic nanostructures, have been a widely studied topic in the last few decades. Besides other applications, it seems to be reasonable using such hybrid systems for designing future biomimetic solar cells. In this paper, we describe selected results that point out to various aspects of the interactions between photosynthetic complexes and plasmonic excitations in Silver Island Films (SIFs). In addition to simple light-harvesting complexes, like peridinin-chlorophyll-protein (PCP) or the Fenna-Matthews-Olson (FMO) complex, we also discuss the properties of large, photosynthetic reaction centers (RCs) and Photosystem I (PSI)-both prokaryotic PSI core complexes and eukaryotic PSI supercomplexes with attached antenna clusters (PSI-LHCI)-deposited on SIF substrates.

Photochemical Printing of Plasmonically Active Silver Nanostructures.

In this paper, we demonstrate plasmonic substrates prepared on demand, using a straightforward technique, based on laser-induced photochemical reduction of silver compounds on a glass substrate. Importantly, the presented technique does not impose any restrictions regarding the shape and length of the metallic pattern. Plasmonic interactions have been probed using both Stokes and anti-Stokes types of emitters that served as photoluminescence probes. For both cases, we observed a pronounced increase of the photoluminescence intensity for emitters deposited on silver patterns. By studying the absorption and emission dynamics, we identified the mechanisms responsible for emission enhancement and the position of the plasmonic resonance.

Optical Properties of Submillimeter Silver Nanowires Synthesized Using the Hydrothermal Method.

We report on the synthesis of long silver nanowires using the hydrothermal method, with H2O2 as the reducing agent. Our approach yields nanowires with an average diameter and length of about 100 nm and 160 µm, respectively, reaching the maximum length of 800 µm. Scanning electron microscopy (SEM) measurements revealed the presence of a thick, inhomogeneous poly(vinylpyrrolidone) (PVP) layer covering the nanowires, which with time becomes much more uniform, leading to well-defined extinction peaks in the ultraviolet-visible (UV-Vis) spectra. This change in morphology is evidenced also by the fluorescence enhancement behavior probed using protein complexes. Wide-field and confocal fluorescence microscopy measurements demonstrate strong, 10-fold enhancement of the protein emission intensity, accompanied by a reduction of the fluorescence decay time. In addition, for the aged, one-month-old nanowires, the uniformity of the intensity profile along them was substantially improved as compared with the as-synthesized ones. The results point towards the importance of the morphology of plasmonically active silver nanowires when considering their application in enhancing optical properties or achieving energy propagation over submillimeter distances.

Energy Transfer from Photosystem I to Thermally Reduced Graphene Oxide.

The energy transfer from photosynthetic complex photosystem I to thermally reduced graphene oxide was studied using fluorescence microscopy and spectroscopy, and compared against the structure in which monolayer epitaxial graphene was used as the energy acceptor. We find that the properties of reduced graphene oxide (rGO) as an energy acceptor is qualitatively similar to that of epitaxial graphene. Fluorescence quenching, which in addition to shortening of fluorescence decay, is a signature of energy transfer varies across rGO substrates and correlates with the transmission pattern. We conclude that the efficiency of the energy transfer depends on the number of rGO layers in the flakes and decreases with this number. Furthermore, careful analysis of fluorescence imaging data confirms that the energy transfer efficiency dependence on the excitation wavelength, also varies with the number of rGO flakes.

Wide-Field Fluorescence Microscopy of Real-Time Bioconjugation Sensing.

We apply wide-field fluorescence microscopy to measure real-time attachment of photosynthetic proteins to plasmonically active silver nanowires. The observation of this effect is enabled, on the one hand, by sensitive detection of fluorescence and, on the other hand, by plasmonic enhancement of protein fluorescence. We examined two sample configurations with substrates being a bare glass coverslip and a coverslip functionalized with a monolayer of streptavidin. The different preparation of the substrate changes the observed behavior as far as attachment of the protein is concerned as well as its subsequent photobleaching. For the latter substrate the conjugation process is measurably slower. The described method can be universally applied in studying protein-nanostructure interactions for real-time fluorescence-based sensing.