Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
Int J Biol Macromol ; 232: 123105, 2023 Mar 31.
Artículo en Inglés | MEDLINE | ID: mdl-36603717

RESUMEN

The development of high-performance composite films using biomass materials have become a sought-after direction. Herein, a green method to fabricate strong, flexible and UV-shielding biological composite film from wood cellulose skeleton (WCS), lignin nanoparticles (LNPs) and polyvinyl alcohol (PVA) was described. In the work, WCS and LNPs were prepared by chemical treatment of wood veneer and Enzymatic lignin, respectively. Then, WCS was infiltrated with the LNPs/PVA mixtures and dried to obtain composite films. WCS enhanced the mechanical properties of the composite films, the tensile stress reached to 85.8 MPa and the tensile strain reached to 6.39 %. The composite films with LNPs blocked over 98 % of UV-light, the water absorption decreased by 30 %, and the thermal stabilities were also improved. These findings would provide some references for exploring high quality biological composite films.


Asunto(s)
Lignina , Nanopartículas , Lignina/química , Celulosa/química , Alcohol Polivinílico/química , Madera , Nanopartículas/química , Esqueleto
2.
Polymers (Basel) ; 11(12)2019 Nov 22.
Artículo en Inglés | MEDLINE | ID: mdl-31771105

RESUMEN

Renewable cellulose-based materials have gained increasing interest in food packaging because of its favorable biodegradability and biocompatibility, whereas the barrier properties of hydrophilic and porous fibers are inadequate for most applications. Exploration of lignin redistribution for enhancing barrier properties of paper packaging material was carried out in this work. The redistribution of nanolized alkali lignin on paper surface showed excellent water, grease, and water vapor barrier. It provided persisted water (contact angle decrease rate at 0.05°/s) and grease (stained area undetectable at 72 h) resistance under long-term moisture or oil direct contact conditions, which also inhibited the bacterial growth to certain degree. Tough water vapor transmission rate can be lowered 82% from 528 to 97 g/m2/d by lignin redistribution. The result suggests that alkali lignin, with multiple barrier properties, has great potential in bio-based application considering the biodegradability, biocompatibility, and recyclability.

3.
ACS Appl Mater Interfaces ; 9(8): 7339-7346, 2017 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-28192659

RESUMEN

A self-host thermally activated delayed fluorescence (TADF) dendrimer POCz-DPS for solution-processed nondoped blue organic light-emitting diodes (OLEDs) was designed and synthesized, in which the bipolar phosphine oxide carbazole moiety was introduced by alkyl chain to ensure balanced charge transfer. The investigation of physical properties showed that the bipolar dendrons not only improve the morphological stability but also restrain the concentration quenching effect of the TADF emissive core. The spin-coated OLEDs featuring POCz-DPS as the host-free blue emitter achieved the highest external quantum efficiency (7.3%) and color purity compared with those of doped or nondoped devices based on the parent molecule DMOC-DPS, which indicates that incorporating the merits of encapsulation and bipolar dendron is an effective way to improve the electroluminescent performance of the TADF emitter used for a solution-processed nondoped device.

4.
ACS Appl Mater Interfaces ; 8(3): 2010-6, 2016 Jan 27.
Artículo en Inglés | MEDLINE | ID: mdl-26726923

RESUMEN

A benzimidazole/phosphine oxide hybrid 1,3,5-tris(1-(4-(diphenylphosphoryl)phenyl)-1H-benzo[d]imidazol-2-yl)benzene (TPOB) was newly designed and synthesized as the electron-transporting component to form an exciplex-type host with the conventional hole-transporting material tris(4-carbazoyl-9-ylphenyl)amine (TCTA). Because of the enhanced triplet energy and electron affinity of TPOB, the energy leakage from exciplex-state to the constituting molecule was eliminated. Using energy transfer from exciplex-state, solution-processed blue phosphorescent organic light-emitting diodes (PHOLEDs) achieved an extremely low turn-on voltage of 2.8 V and impressively high power efficiency of 22 lm W(-1). In addition, the efficiency roll-off was very small even at luminance up to 10 000 cd m(-2), which suggested the balanced charge transfer in the emission layer. This study demonstrated that molecular modulation was an effective way to develop efficient exciplex-type host for high performanced PHOLEDs.

5.
ACS Appl Mater Interfaces ; 7(45): 25129-38, 2015 Nov 18.
Artículo en Inglés | MEDLINE | ID: mdl-26502064

RESUMEN

Three solution-processable exciplex-type host materials were successfully designed and characterized by equal molar blending hole transporting molecules with a newly synthesized electron transporting material, which possesses high thermal stability and good film-forming ability through a spin-coating technique. The excited-state dynamics and the structure-property relationships were systematically investigated. By gradually deepening the highest occupied molecular orbital (HOMO) level of electron-donating components, the triplet energy of exciplex hosts were increased from 2.64 to 3.10 eV. Low temperature phosphorescence spectra demonstrated that the excessively high triplet energy of exciplex would induce a serious energy leakage from the complex state to the constituting molecule. Furthermore, the low energy electromer state, which only exists under the electroexcitation, was found as another possible channel for energy loss in exciplex-based phosphorescent organic light-emitting diodes (OLEDs). In particular, as quenching of the exciplex-state and the triplet exciton were largely eliminated, solution-processed blue phosphorescence OLEDs using the exciplex-type host achieved an extremely low turn-on voltage of 2.7 eV and record-high power efficiency of 22.5 lm W(-1), which were among the highest values in the devices with identical structure.

6.
ACS Appl Mater Interfaces ; 7(13): 7303-14, 2015 Apr 08.
Artículo en Inglés | MEDLINE | ID: mdl-25785899

RESUMEN

Two soluble bipolar host materials (mCP-BPBI and CP-QPBI), comprising different proportions of hole-transporting carbazole and electron-transporting benzimidazole, were synthesized. Their thermal, physical, and electrochemical properties were characterized. The designated bulky star-shaped structures efficiently suppress the direct intramolecular interaction between the donor and acceptor subunits to give high triplet energies. Through computational studies, varying the ratio of hole- and electron-transporting moieties could significantly change the carrier injection/transporting abilities and charge balance properties of the host materials. Indeed, CP-QPBI with more benzimidazole units shows extremely enhanced current density at the same voltage when compared to mCP-BPBI. The operating voltage of solution-processed phosphorescent light-emitting diodes with CP-QPBI as host were dramatically reduced by ∼3 V compared with the similar devices of mCP-BPBI. At the same time, the power efficiencies were improved for 2-2.5 times at the corresponding voltage. Importantly, both blue and green devices maintain their high efficiencies even at brightness up to 1000 cd m(-2), which clearly demonstrates that the new strategy applied to improve electron-transporting ability and charge-balance property of the solution-processable host material by tuning the ratio of donor and acceptor unit is profitable.

7.
Chemistry ; 20(8): 2244-53, 2014 Feb 17.
Artículo en Inglés | MEDLINE | ID: mdl-24458597

RESUMEN

A liquid/liquid interfacial reaction system was designed to fabricate α-Fe2O3 cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C8H17)2(CH3)2N]FeCl4) for manufacturing α-Fe2O3 cubes by a novel and environmentally friendly hydrothermal method under low-temperature conditions (140 °C). The iron-containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α-Fe2O3 cubes. Nanomaterials synthesized from hydrophobic iron-containing ionic liquids show good crystallinity, well-developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α-Fe2 O3 was investigated in detail. [(C8H17)2(CH3)2N]FeCl4 is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α-Fe2O3 cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α-Fe2O3 cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as-prepared α-Fe2O3 cubes. The photocurrent response of an α-Fe2O3 cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...