Transition metals-based electrocatalysts on super-flat substrate for perovskite photovoltaic hydrogen production with 13.75% solar to hydrogen efficiency.

Harnessing the inexhaustible solar energy for water splitting is regarded one of the most promising strategies for hydrogen production. However, sluggish kinetics of oxygen evolution reaction (OER) and expensive photovoltaics have hindered commercial viability. Here, an adhesive-free electrodeposition process is developed for in-situ preparation of earth-abundant electrocatalysts on super-flat indium tin oxide (ITO) substrate. NiFe hydroxide exhibited prominent OER performance, achieving an ultra-low overpotential of 236 mV at 10 mA/cm2 in alkaline solution. With the superior OER activity, we achieved an unassisted solar water splitting by series connected perovskite solar cells (PSCs) of 2 cm2 aperture area with NiFe/ITO//Pt electrodes, yielding overall solar to hydrogen (STH) efficiency of 13.75 %. Furthermore, we upscaled the monolithic facility to utilize perovskite solar module for large-scale hydrogen production and maintained an approximate operating current of 20 mA. This creative strategy contributes to the decrease of industrial manufacturing expenses for perovskite-based photovoltaic-electrochemical (PV-EC) hydrogen production, further accelerating the conversion and utilization of carbon-free energy.

Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells.

Volatile solid additive is an effective and simple strategy for morphology control in organic solar cells (OSCs). The development of environmentally friendly new additives which can also be easily removed without high-temperature thermal annealing treatment is currently a trend, and the working mechanism needs to be further studied. Herein, a highly volatile and non-halogenated solid additive 1-benzothiophene (BBT) is reported to regulate molecular aggregation and stacking of active layer components. According to the film-forming kinetics process, a momentary intermediate phase is formed during spin-coating, which slows down the film-forming process and leads to more ordered molecular stacking in the solid film after introducing solid additive BBT. Subsequently, after solvent vapor annealing (SVA) further treatment, the resultant blend films exhibit a tighter and more ordered molecular stacking. Consequently, the synergistic effect of solid additive BBT and SVA treatment can effectively control morphology of active layer and improve carrier transport characteristics, thereby enhancing the performance of OSCs. Finally, in D18-Cl:N3 system, an impressive power conversion efficiency of 19.53% is achieved. The work demonstrates that the combination of highly volatile solid additives and SVA treatment is an effective morphology control strategy, guiding the development of efficient OSCs.

Regulation of Lead Iodide Crystallization and Distribution for Efficient Perovskite Solar Cells.

At present, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has reached 26.1%. Polycrystalline perovskite films prepared by sequential deposition are often accompanied by excess PbI2. Although excess PbI2 can reduce the internal defects of the perovskites and promote charge transfer, excess PbI2 is unevenly distributed in the perovskites and easily decomposed into the composite center of charge. Therefore, the growth and distribution of PbI2 crystals can be regulated by introducing 4-fluoroaniline (4-FLA) as an additive into the precursor of PbI2. We observe that the presence of an amino group in 4-FLA leads to a reduction in the strength of van der Waals forces between PbI2 layer structures, thereby facilitating the uniform dispersion of excess PbI2 within the perovskites. Additionally, 4-FLA is restricted from being embedded in the PbI2 layer due to the steric hindrance of 4-FLA and the hydrogen bond interaction between nitrogen atoms and PbI2. Therefore, it leads to better dispersion of PbI2, resulting in better passivation and device efficiency. Based on the hydrophobicity of the benzene ring, the modified perovskite film shows excellent hydrophobicity. Ultimately, we achieved 21.63% PCE and 1.16V VOC. This provides an effective strategy for regulating excess PbI2 to achieve efficient and stable PSCs.

Observation of Hot Carrier Localization Affected by A Cations in Hybrid Perovskites.

Organic-inorganic lead halide perovskites (OLHPs) have demonstrated exceptional properties in high-performance photoelectric devices. However, the impact of A-site cations, specifically formamidinium and methylammonium (MA), on the optoelectronic properties of OLHPs, particularly in the context of hot carrier utilization, remains a topic of debate. In this study, we propose a method for characterizing hot carrier transportation by measuring the hot carrier mobility and momentum-dependent transient photocurrent influenced by A-site cations in OLHPs. Our findings reveal that the direction of photon drag current is reversed upon substitution of the MA cation, suggesting the strong localization of hot carriers by the MA cation dipole. Furthermore, the correlation between the hot carrier photoconductivity and the electronic structure in different A-site cation samples indicates that hot carrier mobility in OLHPs can be reduced by >50% due to the influence of A-site cations.

Association of mixed exposure to microplastics with sperm dysfunction: a multi-site study in China.

BACKGROUND: Microplastics are environmental pollutants detected in various human organs and tissues. These particles originate from multiple sources including the degradation of larger plastic items and the intentional inclusion in consumer goods. Potential risks for human health resulting from microplastics exposure have also been reported. However, the distribution in the male reproductive system and its effect remains largely unknown. This study aims to investigate the presence of multiple microplastics in human semen and urine and their association with sperm quality in a multi-site study across China. METHODS: We conducted a cross-sectional study involving 113 male participants from three regions in China. Semen and urine samples were collected and analysed using Raman microscopy to detect eight types of microplastics: polystyrene (PS), polypropylene (PP), polycarbonate (PC), polyethylene (PE), polyvinyl chloride (PVC), polytetrafluoroethylene (PTFE), polyethylene terephthalate (PET), and acrylonitrile butadiene styrene (ABS). Semen quality parameters, including total sperm count, concentration, motility, and morphology, were assessed. Statistical analyses, including single and multi-variable models, were used to evaluate the relationship between microplastic exposure and semen quality, with a focus on PTFE, after adjusting confounding factors of age, body mass index (BMI), smoking, alcohol drinking, and sites. FINDINGS: Microplastics were detected in all semen and urine samples, with participants typically exposed to 3-5 different types. The detection rates of PS, PP and PE were the highest. Notably, PTFE exposure was significantly associated with decreased semen quality. Participants exposed to PTFE showed reductions in total sperm count [188.90 ± 163.71 vs. 207.67 ± 132.36 million, p = 0.091], sperm concentration [52.13 ± 47.47 vs. 58.32 ± 37.26 million/mL, p = 0.041], and progressive motility [40.29% ± 19.06 vs. 34.11% ± 17.02, p = 0.083]. The multi-linear regression analysis indicated that each additional type of microplastic exposure was associated with a significant decrease in total sperm number [ß = -15.4 (95% CI: -25.6, -5.2)], sperm concentration [ß = -7.2 (95% CI: -12.4, -2.0)], and progressive motility [ß = -8.3 (95% CI: -13.5, -3.1)]. Latent category analysis further refined these groups by types of microplastic exposure, highlighting specific types more strongly associated with decreased semen quality (OR = 3.5, 95% CI: 1.8, 6.9, p < 0.001). The nomogram can be used to assess the risk of sperm damage by combining the type of microplastic exposure in urine with age and BMI. INTERPRETATION: Our findings highlight the potential reproductive health risks posed by microplastic contamination, particularly PTFE, a non-stick pan coating material, and raise concerns about the potential of urine testing as an indicator of male reproductive microplastic exposure. Future research is warranted to further elucidate the mechanisms underlying the adverse effects of microplastics on male fertility and cross-generational effects. FUNDING: This study was funded by the Clinical Research Project of Shanghai Municipal Commission of Health and Family planning (20224Y0085), Open Fund Project of Guangdong Academy of Medical Sciences (YKY-KF202202), CAMS Innovation Fund for Medical Sciences (2019-I2M-5-064), Shanghai Clinical Research Center for Gynecological Diseases (22MC1940200), Shanghai Urogenital System Diseases Research Centre (2022ZZ01012), Key Discipline Construction Project (2023-2025) of Three-Year Initiative Plan for Strengthening Public Health System Construction in Shanghai (GWVI-11.1-35, GWVI-11.2-YQ29) and Shanghai Frontiers Science Research Base of Reproduction and Development.

Unveiling the Mechanism of Plasma-Catalytic Low-Temperature Water-Gas Shift Reaction over Cu/γ-Al2O3 Catalysts.

The water-gas shift (WGS) reaction is a crucial process for hydrogen production. Unfortunately, achieving high reaction rates and yields for the WGS reaction at low temperatures remains a challenge due to kinetic limitations. Here, nonthermal plasma coupled to Cu/γ-Al2O3 catalysts was employed to enable the WGS reaction at considerably lower temperatures (up to 140 °C). For comparison, thermal-catalytic WGS reactions using the same catalysts were conducted at 140-300 °C. The best performance (72.1% CO conversion and 67.4% H2 yield) was achieved using an 8 wt % Cu/γ-Al2O3 catalyst in plasma catalysis at ∼140 °C, with 8.74 MJ mol-1 energy consumption and 8.5% H2 fuel production efficiency. Notably, conventional thermal catalysis proved to be ineffective at such low temperatures. Density functional theory calculations, coupled with in situ diffuse reflectance infrared Fourier transform spectroscopy, revealed that the plasma-generated OH radicals significantly enhanced the WGS reaction by influencing both the redox and carboxyl reaction pathways.

SnO2 Interacted with Sodium Thiosulfate for Perovskite Solar Cells over 25% Efficiency.

Tin oxide (SnO2) as electron transportation layer (ETL) has demonstrated remarkable performance applied in perovskite solar cells but still accommodated a host of defects such as oxygen vacancies, uncoordinated Sn4+ , and absorbed hydroxyl groups. Here, we use inorganic sodium thiosulfate Na2S2O3 to modify SnO2 nanoparticles in a bulk blending manner. Strong interaction between Na2S2O3 and SnO2 occurs, as reflected from the elemental chemical state change. The interaction has endowed the SnO2 film with better uniformity, increased conductivity, and more matched energy level with perovskite. Moreover, the modified SnO2 film as a substrate could promote the crystallization of perovskite by suppressing unreacted residual PbI2. The trap density from perovskite bulk to the SnO2 film across their interface has been effectively reduced, thus inhibiting the nonradiative recombination and promoting the transportation and extraction of charge carriers. Finally, the solar cell based on modified SnO2 has achieved a champion efficiency of 25.2%, demonstrating the effectiveness and potential of sulfur-containing molecules on optimizing the SnO2 property.

Epigenetic regulation of high light-induced anthocyanin biosynthesis by histone demethylase IBM1 in Arabidopsis.

In plant species, anthocyanin accumulation is specifically regulated by light signaling. Although the CONSTITUTIVELY PHOTOMORPHOGENIC1/SUPPRESSOR OF PHYA-105 (COP1/SPA) complex is known to control anthocyanin biosynthesis in response to light, the precise mechanism underlying this process remains largely unknown. Here, we report that Increase in BONSAI Methylation 1 (IBM1), a JmjC domain-containing histone demethylase, participates in the regulation of light-induced anthocyanin biosynthesis in Arabidopsis. The expression of IBM1 was induced by high light (HL) stress, and loss-of-function mutations in IBM1 led to accelerated anthocyanin accumulation under HL conditions. We further identified that IBM1 is directly associated with SPA1/3/4 chromatin in vivo to establish a hypomethylation status on H3K9 and DNA non-CG at these loci under HL, thereby releasing their expression. Genetic analysis showed that quadruple mutants of IBM1 and SPA1/3/4 resemble spa134 mutants. Overexpression of SPA1 in ibm1 mutants complements the mutant phenotype. Our results elucidate the significance and mechanism of IBM1 histone demethylase in the epigenetic regulation of anthocyanin biosynthesis in Arabidopsis under HL conditions.

Orientation Manipulation and Defect Passivation for Perovskite Solar Cells by a Natural Compound.

Different facets in perovskite crystals exhibit distinct atomic arrangements, influencing their electronic, physical, and chemical properties. Perovskite films incorporating tin oxide (SnO2) as the electron transport layer face challenges in facet regulation. This study reveals that tea saponin (TS), a natural compound serves as a SnO2 modifier, facilitates optimal growth of perovskite crystals on the (111) facet. The modification promotes preferential crystal orientation through hydrogen bond and Lewis coordination. TS forms a chelate with SnO2, resulting in a smoother film and n-type doping, leading to improved carrier extraction and reduced defects. The TS-modified perovskite solar cells achieve a champion efficiency of 24.2%, leveraging from an obvious enhancement of open-circuit voltage (Voc) of 1.18 V and fill factor (FF) of 82.8%. The devices also demonstrate enhanced humidity tolerance and storage stability, ensuring improved stability without encapsulation.

Association of serum folic acid levels in response to fasting blood glucose in early pregnancy with the risk of gestational diabetes mellitus: A retrospective cohort study.

OBJECTIVE: With increasingly prevalent folic acid consumption in early pregnancy, concerns about its potentially negative effect on maternal metabolism have been raised. Recent findings regarding folic acid levels in the first trimester and the risk of gestational diabetes mellitus have been inconclusive. The aim of this study was to investigate the association of folic acid status in early pregnancy with gestational diabetes mellitus as well as examine whether glucose levels can be modulated by folic acid status during the same first trimester. METHODS: This was a retrospective cohort study based on 27 128 Chinese pregnant women who registered during their first prenatal visit from January 2015 to December 2019. Serum folic acid and fasting blood glucose concentrations were measured during the 9th to 13th gestational weeks. Binary logistic regression was applied to estimate the odds ratios of gestational diabetes mellitus by using the serum folic acid levels quartiles with adjustment for major confounders. To investigate the potential effect of modifying key risk factors for gestational diabetes mellitus, we established subgroups, in which analyses were stratified by age (<25, 25-29, 30-34, and ≥35 y), parity (nulliparous and parous), prepregnancy body mass index (< 18.5, 18.5-23.9, and ≥ 24 kg/m2), and family history of diabetes (yes and no). RESULTS: The positive association between maternal folate concentrations and fasting blood glucose was observed: the risk for hyperglycemia was higher in those in the middle (Q3) and higher (Q4) quartiles compared with those in Q1 and Q2. A higher risk for gestational diabetes mellitus was found in hyperglycemia of early pregnant women with high folate concentrations (Q3: odds ratio = 5.63; 95% CI, 4.56-6.95, and Q4: odds ratio = 5.57; 95% CI, 4.68-6.64) compared with normal fasting glucose mothers with folate concentrations in Q1 and Q2 after accounting for multiple covariables. Similar patterns were observed for different subgroups. Restricted cubic spline plots had a positive correlation of serum folic acid level with fasting blood glucose concentration as well as risk of gestational diabetes mellitus in a nonlinear pattern, with 32.5 nmol/L as the cutoff point for folic acid level. CONCLUSIONS: Our findings underscore the importance of maintaining an appropriate folic acid concentration for preserving a lower risk of gestational diabetes mellitus, especially in women with relatively higher blood glucose in early pregnancy. Additionally, folic acid concentration > 32.5 nmol/L may be considered a risk factor for gestational diabetes mellitus. This research suggested that folic acid levels should be monitored during the first trimester from the first prenatal checkup to prevent adverse effects of excessive folic acid intake.

Thermal-to-Electrical Conversion Based on Salinity Gradient Driven by Evaporation.

Constructing concentration differences between anions and cations at the ends of an ionic conductor is an effective strategy in electricity generation for powering wearable devices. Temperature gradient or salinity gradient is the driving force behind such devices. But their corresponding power generation devices are greatly limited in actual application due to their complex structure and harsh application conditions. In this study, a novel ionic concentration gradient electric generator based on the evaporation difference of the electrolyte is proposed. The device can be constructed without the need for semipermeable membranes, and operation does not need to build a temperature difference. As a demonstration, a PVA-Na ionic hydrogel is prepared as an electrolyte for the device and achieved a thermovoltage of more than 200 mV and an energy density of 77.94 J m-2 at 323 K. Besides, the device exhibits the capability to sustain a continuous voltage output for a duration exceeding 1500 min, as well as enabling charging and discharging cycles for 100 iterations. For practical applications, a module comprising 16 sub-cells is constructed and successfully utilized to directly power a light-emitting diode. Wearable devices and their corresponding cell modules are also developed to recycle body heat.

Crystallization Kinetics of Hybrid Perovskite Solar Cells.

Metal halide perovskites (MHPs) are considered ideal photovoltaic materials due to their variable crystal material composition and excellent photoelectric properties. However, this variability in composition leads to complex crystallization processes in the manufacturing of Metal halide perovskite (MHP) thin films, resulting in reduced crystallinity and subsequent performance loss in the final device. Thus, understanding and controlling the crystallization dynamics of perovskite materials are essential for improving the stability and performance of PSCs (Perovskite Solar Cells). To investigate the impact of crystallization characteristics on the properties of MHP films and identify corresponding modulation strategies, we primarily discuss the relevant aspects of MHP crystallization kinetics, systematically summarize theoretical methods, and outline modulation techniques for MHP crystallization, including solution engineering, additive engineering, and component engineering, which helps highlight the prospects and current challenges in perovskite crystallization kinetics.

Development of a 39 MM-InDel multiplex assay for the forensic application.

Insertion/deletion polymorphisms (InDels) are a category of highly prevalent markers in the human genome, characterized by their distinctive attributes, including short amplicon sizes and low mutation rates, which have shown great potential in forensic applications. Multi-allelic InDel and multi-InDel markers, collectively abbreviated as MM-InDels, were developed to enhance polymorphism by the introduction of novel alleles. Nevertheless, the relatively low mutation rates of InDels, coupled with the founder effect, result in distinct allele frequency distributions among populations. The divergent characteristics of InDels in different populations also pose challenges to the establishment of universally efficient InDel multiplex assays. To enhance the system efficiency of the InDel assay and its applicability across diverse populations, 39 MM-InDels with high polymorphism in five different ancestry superpopulations were selected from the 1000 Genomes Project dataset and combined with an amelogenin gender marker to construct a multiplex assay (named MMIDplex). The combined power of discrimination and the cumulative probability of exclusion of 39 MM-InDels were 1 - 1.3 × 10-23 and 1 - 9.83 × 10-6 in the Chinese Han population, and larger than 1-10-19 and 1-10-4 in the reference populations, relatively. These results demonstrate that the MMIDplex assay has the potential to obtain sufficient power for individual identification and paternity test in global populations.

Fine-Tuned Active Layer Morphology for Bulk Heterojunction Organic Solar Cells with Indene-C60 Bisadduct as a Third Component.

Active layer morphology is of vital importance for the photovoltaic performance of organic solar cells (OSCs). As fullerene derivatives and nonfullerene acceptors are highly complementary in many aspects, fullerene derivatives as a third component in nonfullerene OSCs could tune the blend morphology and improve the power conversion efficiency (PCE). Relative to PCBM, the indene-C60 bisadduct (IC60BA) as the third component in nonfullerene binary OSCs has not been extensively studied. Here, the fullerene derivative IC60BA is introduced into the PTZ1:IDIC blend system to finely tune the active layer morphology. Although the addition of IC60BA reduced the film absorption in the visible region and weakened the crystallinity, the more symmetric charge transport property, smaller domain size, and higher domain purity led to improved photovoltaic performance. This study indicates that IC60BA is a promising candidate to finely tune the morphology for achieving highly efficient OSCs.

The response of rhubarb to smut infection is revealed through a comparative transcriptome and metabolome study.

MAIN CONCLUSION: Integrated transcriptome and metabolome analysis have unveiled the physiological and molecular responses of rhubarb to infection by smut fungi. Rhubarb is an important medicinal plant that is easily infected by smut fungi during its growth. Thus far, no research on the influence of smut fungi on the growth of rhubarb and its secondary metabolism has been conducted. In this study, petioles of Chinese rhubarb (Rheum officinale) [healthy or infected with smut fungus (Thecaphora schwarzmaniana)] were characterized. Microscopic structure, global gene expression profiling, global metabolic profiling, and key enzyme activity and metabolite levels in infected plants were analyzed. Infection by smut fungi resulted in numerous holes inside the petiole tissue and led to visible tumors on the external surface of the petiole. Through metabolic changes, T. schwarzmaniana induced the production of specific sugars, lipids, and amino acids, and inhibited the metabolism of phenolics and flavonoids in R. officinale. The concentrations of key medicinal compounds (anthraquinones) were decreased because of smut fungus infection. In terms of gene expression, the presence of T. schwarzmaniana led to upregulation of the genes associated with nutrient (sugar, amino acid, etc.) transport and metabolism. The gene expression profiling showed a stimulated cell division activity (the basis of tumor formation). Although plant antioxidative response was enhanced, the plant defense response against pathogen was suppressed by T. schwarzmaniana, as indicated by the expression profiling of genes involved in biotic and abiotic stress-related hormone signaling and the synthesis of plant disease resistance proteins. This study demonstrated physiological and molecular changes in R. officinale under T. schwarzmaniana infection, reflecting the survival tactics employed by smut fungus for parasitizing rhubarb.

Subnanocyclic Molecule of 15-Crown-5 Inhibiting Interfacial Water Decomposition and Stabilizing Zinc Anodes via Regulation of Zn2+ Solvation Shell.

Aqueous zinc ion batteries exhibit a promising application prospect for next-generation energy storage devices. However, the decomposition of active H2O molecules on the Zn anode induces drastic dendrite formation, thereby impairing the performance for entire devices. To solve this challenge, we introduce subnanocyclic molecules of 15-Crown-5 as an additive into ZnSO4 electrolyte to stabilize the Zn anode. Owing to the binding property of crown ethers with alkali metal ions and the size-fit rule, the 15-Crown-5 additives enable effective regulation of the solvation structure of hydrated Zn2+ and reduce the efficient contact between Zn anode and active H2O, which are validated by the experimental analysis and theoretical calculations. Under the assistance of the 15-Crown-5 additive, the as-assembled Zn-based batteries deliver superior performance compared with ZnSO4 and 18-Crown-6contaning ZnSO4 electrolytes. This work shows a bright direction toward progress in aqueous batteries.

The AP2/ERF transcription factor PtoERF15 confers drought tolerance via JA-mediated signaling in Populus.

Drought stress is one of the major limiting factors for the growth and development of perennial trees. Xylem vessels act as the center of water conduction in woody species, but the underlying mechanism of its development and morphogenesis under water-deficient conditions remains elucidation. Here, we identified and characterized an osmotic stress-induced ETHYLENE RESPONSE FACTOR 15 (PtoERF15) and its target, PtoMYC2b, which was involved in mediating vessel size, density, and cell wall thickness in response to drought in Populus tomentosa. PtoERF15 is preferentially expressed in differentiating xylem of poplar stems. Overexpression of PtoERF15 contributed to stem water potential maintaining, thus promoting drought tolerance. RNA-Seq and biochemical analysis further revealed that PtoERF15 directly regulated PtoMYC2b, encoding a switch of JA signaling pathway. Additionally, our findings verify that three sets of homologous genes from NAC (NAM, ATAF1/2, and CUC2) gene family: PtoSND1-A1/A2, PtoVND7-1/7-2, and PtoNAC118/120, as the targets of PtoMYC2b, are involved in the regulation of vessel morphology in poplar. Collectively, our study provides molecular evidence for the involvement of the PtoERF15-PtoMYC2b transcription cascade in maintaining stem water potential through the regulation of xylem vessel development, ultimately improving drought tolerance in poplar.

Balancing the Efficiency and Synthetic Accessibility of Organic Solar Cells with Isomeric Acceptor Engineering.

With the continuous development of organic semiconductor materials and on-going improvement of device technology, the power conversion efficiencies (PCEs) of organic solar cells (OSCs) have surpassed the threshold of 19%. Now, the low production cost of organic photovoltaic materials and devices have become an imperative demand for its practical application and future commercialization. Herein, the feasibility of simplified synthesis for cost-effective small-molecule acceptors via end-cap isomeric engineering is demonstrated, and two constitutional isomers, BTP-m-4Cl and BTP-o-4Cl, are synthesized and compared in parallel. These two non-fullerene acceptors (NFAs) have very similar optoelectronic properties but nonuniform morphological and crystallographic characteristics. Consequently, the OSCs composed of PM6:BTP-m-4Cl realize PCE of 17.2%, higher than that of the OSCs with PM6:BTP-o-4Cl (≈16%). When ternary OSCs are fabricated with PM6:BTP-m-4Cl:BTP-o-4Cl, the averaged PCE value reaches 17.95%, presenting outstanding photovoltaic performance. Most excitingly, the figure of merit (FOM) values of PM6:BTP-m-4Cl, PM6:BTP-o-4Cl, and PM6:BTP-m-4Cl:BTP-o-4Cl based devices are 0.190, 0.178, and 0.202 respectively. The FOM values of these systems are all among the top ones of the current high-efficiency OSC systems, revealing high cost-effectiveness of the two NFAs. This work provides a general but accessible strategy to minimize the efficiency-cost gap and promises the economic prospects of OSCs.

Ion-Electron Coupling Enables Ionic Thermoelectric Material with New Operation Mode and High Energy Density.

Ionic thermoelectrics (i-TE) possesses great potential in powering distributed electronics because it can generate thermopower up to tens of millivolts per Kelvin. However, as ions cannot enter external circuit, the utilization of i-TE is currently based on capacitive charge/discharge, which results in discontinuous working mode and low energy density. Here, we introduce an ion-electron thermoelectric synergistic (IETS) effect by utilizing an ion-electron conductor. Electrons/holes can drift under the electric field generated by thermodiffusion of ions, thus converting the ionic current into electrical current that can pass through the external circuit. Due to the IETS effect, i-TE is able to operate continuously for over 3000 min. Moreover, our i-TE exhibits a thermopower of 32.7 mV K-1 and an energy density of 553.9 J m-2, which is more than 6.9 times of the highest reported value. Consequently, direct powering of electronics is achieved with i-TE. This work provides a novel strategy for the design of high-performance i-TE materials.

Real-time observation of the buildup of polaron in α-FAPbI3.

The formation of polaron, i.e., the strong coupling process between the carrier and lattice, is considered to play a crucial role in benefiting the photoelectric performance of hybrid organic-inorganic halide perovskites. However, direct observation of the dynamical formation of polarons occurring at time scales within hundreds of femtoseconds remains a technical challenge. Here, by terahertz emission spectroscopy, we demonstrate the real-time observation of polaron formation process in FAPbI3 films. Two different polaron resonances interpreted with the anharmonic coupling emission model have been studied: P1 at ~1 THz relates to the inorganic sublattice vibration mode and the P2 at ~0.4 THz peak relates to the FA+ cation rotation mode. Moreover, P2 could be further strengthened than P1 by pumping the hot carriers to the higher sub-conduction band. Our observations could open a door for THz emission spectroscopy to be a powerful tool in studying polaron formation dynamics in perovskites.