Portable electrochemical sensor for adrenaline detection using CoNi-MOF-based CS-PAM hydrogel.

The development of a portable smartphone-based electrochemical sensor for analyzing adrenaline levels in real samples can make a great contribution to the research community worldwide. In order to achieve this goal, the key challenge is to build sensing interfaces with excellent electrocatalytic properties. In this work, microspherical bimetallic metal-organic frameworks (CoNi-MOF) consisting of nanoclusters were first synthesized using a hydrothermal method. On this basis, the catalytic activity of pure chitosan-polyacrylamide hydrogel (CS-PAM) was modulated by adding different amounts of CoNi-MOF during the in-situ synthesis of CS-PAM. Finally, a portable electrochemical detection system based on CS-PAM was established for the detection of adrenaline. A series of resulting composite hydrogels with a large specific surface area, abundant active sites, and unique network structure facilitate the enrichment and catalysis of adrenaline molecules. Under optimal conditions, the analytical platform constructed by using CoNi-MOF-based CS-PAM has the advantages of a wide detection range (0.5-10 and 10-2500 µM), a low detection limit (0.167 µM), and high sensitivity (0.182 and 0.133 µA·µM·cm-2). In addition, the sensor maintains selective detection of the target in the presence of many different types of interferences, and the current response is not significantly reduced even after 60 cycles of testing. We strongly believe that the designed smart portable sensing can realize the accurate determination of adrenaline in complex systems, and this study can provide new ideas for the research of MOFs-based hydrogels in electrochemical analysis.

Self-Assembly Dual Active Site Nanocomposite Anode Ce0.6Mn0.3Fe0.1O2-δ/NiFe/MnOx for Electrooxidative Dehydrogenation of Ethane to Ethylene.

As the demand for ethylene grows continuously in industry, conversion of ethane to ethylene has become more and more important; however, it still faces fundamental challenges of low ethane conversion, low ethylene selectivity, overoxidation, and instability of catalysts. Electrooxidative dehydrogenation of ethane (EODHE) in a solid oxide electrolysis cell (SOEC) is an alternative process. Here, a multiphase oxide Ce0.6Mn0.3Fe0.1O2-δ-NiFe-MnOx has been fabricated by a self-assembly process and utilized as the SOEC anode material for EODHE. The highest ethane conversions reached 52.23% with 94.11% ethylene selectivity at the anode side and CO with 10.9 mL min-1 cm-2 at the cathode side, at 1.8 V at 700 °C. The remarkable electrooxidative performance of CMF-NiFe-MnOx is ascribed to the NiFe alloy and MnOx nanoparticles and improvement of the concentration of oxygen vacancies within the fluorite substrate, generating dual active sites for C2H6 adsorption, dehydrogenation, and selective transformation of hydrogen without overoxidizing the ethylene generated. Such a tailored strategy achieves no significant degradation observed after 120 h of operation and constitutes a promising basis for EODHE.

Controllable assembly of hollow interpenetrated zeolite imidazole framework nanocomposite for dopamine charge collection.

The synergistic armor-etching (SAE) approach was proposed using natural organic weak acid (tannic acid, i.e., TA) for the controllable assembly of hollow and interpenetrated HZIF-8@MWCNTs hybrid nanomaterial (ZIF-8, zeolitic imidazolate framework-8; MWCNTs, multi-walled carbon nanotubes), which exhibited highly ordered crystal structure and unique morphological characteristics. The SAE strategy not only can rapidly etch solid ZIF- material into a hollow structure (~ 10 min), but also form the TA shell (~ 33 nm) on its surface. Then, the HZIF-8@MWCNTs electrochemical sensor was constructed for selective and sensitive detection of the target molecule (dopamine, DA). A sequence of studies indicated that the fabricated TA coating was capable of promoting the spread of DA into the reactive centers of hollow MOF and MWCNTs, which exhibited outstanding electroanalytical characteristics through the synergistic effect. The DPV oxidation peak of DA was strongest at 50 mV vs. Ag/AgCl reference electrode. Under the optimal conditions, there are two linear dynamic ranges of current response of 0.01 ~ 10 and 10 ~ 550 µmol L- 1 with a detection limit of 0.003 µmol·L- 1 (S/N = 3). Simultaneously, the HZIF-8@MWCNTs electrochemical sensor could detect low levels of DA in real products. The recoveries of the actual sample tests were between 98.2% and 102%, and the relative standard deviation (R.S.D.) of all studies was less than 3.0%. The statistical analyses (F-test and t-test) were employed to demonstrate the accuracy of method developed. This work will enlighten researchers operating in the domain of MOFs composites, accelerating the advancement of electrochemical sensing on the basis of hollow MOFs materials.

Compound Chinese medicine (F1) improves spleen deficiency diarrhea by protecting the intestinal mucosa and regulating the intestinal flora.

Compound Chinese medicine (F1) is a traditional prescription in Chinese medicine that is commonly used to treat spleen deficiency diarrhea (SDD). It has demonstrated remarkable effectiveness in clinical practice. However, the precise mechanism by which it exerts its antidiarrheal effect is still unclear. This study aimed at investigating the antidiarrheal efficacy and mechanism of F1 on senna-induced secretory diarrhea (SDD). Senna was utilized to induce the development of a mouse model of senna-induced secretory diarrhea (SDD) in order to observe the rate of diarrhea, diarrhea index, blood biochemistry, and histopathological changes in the small intestine. Additionally, the levels of sodium and hydrogen exchange protein 3 (NHE3) and short-chain fatty acids (SCFAs) were determined using enzyme-linked immunosorbent assay (ELISA). The impact of F1 on the senna-induced SDD mouse models was evaluated by monitoring changes in the gut microbiota through 16S rRNA (V3-V4) sequencing. The results demonstrated that F1, a traditional Chinese medicine, effectively increased the body weight of SDD mice and reduced the incidence of diarrhea and diarrhea index. Additionally, F1 restored liver and kidney function, reduced the infiltration of inflammatory cells in intestinal tissue, and promoted the growth of intestinal villi. Furthermore, F1 was found to enhance the expression of NHE3 and SCFAs. It also increased the abundance of Firmicutes and Lactobacillus species, while decreasing the abundance of Proteobacteria and Shigella.

Regulating Solvation Structures Enabled by the Mesoporous Material MCM-41 for Rechargeable Lithium Metal Batteries.

For developing the reversible lithium metal anode, constructing an ideal solid electrolyte interphase (SEI) by regulating the Li+ solvation structure is a powerful way to overcome the major obstacles of lithium dendrite and limited Coulombic efficiency (CE). Herein, spherical mesoporous molecular sieve MCM-41 nanoparticles are coated on a commercial PP separator and used to regulate the Li+ solvation structure for lithium metal batteries (LMBs). The regulated solvation structure exhibits an agminated state with more contact ion pairs (CIPs) and ionic aggregates (AGGs), which successfully construct a homogeneous inorganic-rich SEI in the lithium anode. Meanwhile, the regulated solvation structure weakens the interaction between the solvents and Li+, resulting in low Li+ desolvation energy and uniform Li deposition. Thus, a high CE (∼96.76%), dendrite-free Li anode, and stable Li plating/stripping cycling for approximately 1000 h are achieved in the regulated carbonate-based electrolyte without any additives. Therefore, regulating the Li+ solvation structure in the electrolyte by employing a mesoporous material is a forceful way to construct an ideal SEI and harness lithium metal.

Improvement of Aerosol Filtering Performance of PLLA/PAN Composite Fiber with Gradient Structure.

Since commercial non-woven air filtering materials have unstable filtering efficiency and poor moisture permeability for the abundant condensed aerosol particles in the highly humid atmospheric environment, the PLLA/PAN composite fiber material with a hydrophobic and hydrophilic gradient structure is designed and prepared by using electrode sputtering electro spinning technology. By characterizing and testing the filtrating effect of SEM, XRD, FTIR, wettability, mechanical property, N2 adsorption isotherm, and BET surface area, NaCl aerosol of PLLA fiber, PAN fiber, and PLLA/PAN composite fiber membranes, the study found that the electrode sputtering electrospinning is fine, the fiber mesh is dense, and fiber distribution is uniform when the diameter of the PAN fiber is 140-300 nm, and the PLLA fiber is 700-850 nm. In this case, PLLA/PAN composite fiber materials gather the hydrophobicity of PLLA fiber and the hydrophilicity of PAN fiber; its electrostatic effect is stable, its physical capturing performance is excellent, it can realize the step filtration of gas-solid liquid multiphase flow to avoid the rapid increase of air resistance in a high-humidity environment, and the filtrating efficiency η of NaCl aerosol particles with 0.3 µm reaches 99.98%, and the quality factor QF 0.0968 Pa-1. The manufacturing of PLLA/PAN composite fiber material provides a new method for designing and developing high-performance air filtration materials and a new technical means for the large-scale production of high-performance, high-stability, and low-cost polylactic acid nanofiber composites.

Ti/Ni co-doped perovskite cathode with excellent catalytic activity and CO2 chemisorption ability via nanocatalysts exsolution for solid oxide electrolysis cell.

Carbon dioxide (CO2) gas is the main cause of global warming and has a significant effect on both climate change and human health. In this study, Ni/Ti co-doped Sr1.95Fe1.2Ni0.1Ti0.2Mo0.5O6-δ (SFNTM) double perovskite oxides were prepared and used as solid oxide electrolysis cell (SOEC) cathode materials for effective CO2 reduction. Ti-doping enhances the structural stability of the cathode material and increases the oxygen vacancy concentration. After treatment in 10% H2/Ar at 800°C, Ni nanoparticles were exsolved in situ on the SFNTM surface (Ni@SFNTM), thereby improving its chemisorption and activation capacity for CO2. Modified by the Ti-doping and the in situ exsolved Ni nanoparticles, the single cell with Ni@SFNMT cathode exhibits improved catalytic activity for CO2 reduction, exhibiting a current density of 2.54 A cm-2 at 1.8 V and 800°C. Furthermore, the single cell shows excellent stability after 100 h at 1.4 V, indicating that Ni/Ti co-doping is an effective strategy for designing novel cathode material with high electrochemical performance for SOEC.

Study on population structure of kiwifruit and GWAS for hairiness character.

BACKGROUND: A total of 74,936 SNPs were employed to carry out population structure and genome-wide association studies and post-GWAS for hairiness character of the fifty-six samples including thirty-six Actinidia chinensis var. deliciosa, eighteen A. chinensis var. chinensis, and two A. polygama in the light of morphological observations. RESULTS: The percentage of heterozygous sites of A. chinensis var. deliciosa is higher than that of A. chinensis var. chinensis, which could be one of the reasons for A. chinensis var. deliciosa high disease resistance. Fifty-six samples were divided into two subgroups, in which the genetic distance, ranged from 0.17 to 0.99, according to their genetic divergence. Analysis of molecular variance shows that the frequency of genetic variations within the population is 83.53% and 16.47% between populations. Fst between the two populations is 0.14, and Nm is 1.60. Set at α ≤ 0.05, a total of 327 SNPs and 260 haplotypes were related to the hairiness character. A total of 246 proteins were annotated using GO and KEGG analyses, which indicated the membrane-related genes and stress-resistant metabolic pathways are related to the hairiness character of leaves, stems, and peels of kiwifruit. Protein interaction analysis showed that DNA-directed RNA polymerase was an important node protein that interacted with many proteins. CONCLUSIONS: The genetic basic in the fifty-six genotypes was rich. The results of clustering and morphological observations are not completely consistent, indicating the hairiness character play an important role in the classification of kiwifruit, in which two A. polygama were clustered together with those of A. chinensis var. chinensis. Phylogeny and haplotype analysis showed that the evolution of A. chinensis var. chinensis is later than that of A. chinensis var. deliciosa in A. chinesis. The loss of hairiness character on leaves, stems and peels of A. chinensis var. chinensis compare with A. chinensis var. deliciosa, which is also the result of its poor resistance.

Associations between education levels and prevalence of depressive symptoms: NHANES (2005-2018).

PURPOSE: Our study investigated the relationships between the prevalence of depressive symptoms and education levels in those aged ≥20 years. METHODS: A total of 34,102 participants from the National Health and Nutrition Examination Surveys 2005-2018 were involved in our cross-sectional study. The relations of depressive symptoms (as outcome variable) and education levels (as an independent variable) were analyzed using multivariable logistic regression models in the main analyzes. Sensitivity analyzes, including a multiple sensitivity analysis, were also performed. RESULT: The education levels were negatively associated with depressive symptoms after adjusting related covariates. Compared with the reference group of individuals with less than 9th grade, people with college graduate or above had an adjusted odds ratio (OR) of 0.464 (95% CI 0.361, 0.595, P < 0.0001). On the other hand, the statistically significant negative association disappeared among Mexican Americans, other races, separated, and high family poverty income ratio group. These results remained stable under a wide range of sensitivity analyzes. CONCLUSION: Our study indicated the elevated education levels correlated with the decreased prevalence of depressive symptoms, and race, marital status, and family economic factors played a critical role in the relationship. This report reminds us to pay close attention to the further study of factors that affected the association between depressive symptoms and education levels. LIMITATIONS: The cross-sectional study leaves problems about the direction of causality unclear.

Birth Tourism Is Associated with Fewer Neonatal Intensive Care Unit Admissions: A Healthy Migrant Effect?

OBJECTIVE: This work aimed to study perinatal, maternal, and neonatal characteristics of birth tourism (BT) mother-baby dyads and the rate of neonatal intensive care unit (NICU) admissions of BT infants. STUDY DESIGN: Retrospective study at a regional perinatal center comparing BT mother-baby dyads to all dyads. BT infants admitted to the NICU were compared with a randomly selected group of infants admitted to the NICU during the same time period. RESULTS: A total of 1,755 BT dyads were identified over 4 years. BT mothers were older (32 vs. 28 years, p < 0.0001), more likely to carry multiples (5.5 vs. 1.4%, p < 0.0001), deliver via cesarean section (40 vs. 34%, p < 0.0001), and require postpartum intensive care (0.6 vs. 0.1%, p < 0.0001). BT infants had significantly fewer NICU admissions 96 (5.5%) versus 3,213 (11.3%; p < 0.0001). There were no statistically significant differences in NICU course and outcome between BT and non-BT control infants. CONCLUSION: Birth tourism is associated with unique determinants of health. In our study, there were fewer NICU admissions, potentially explained by the healthy migrant effect. KEY POINTS: · Birthright citizenship attracts foreigners to give birth in the United States.. · BT is associated with unique social determinants of health.. · Fewer NICU admissions in our study are possibly explained by the healthy migrant effect..

Enhanced Electrochemical Performance of the Fe-Based Layered Perovskite Oxygen Electrode for Reversible Solid Oxide Cells.

Reversible solid oxide cells (RSOCs) present a conceivable potential for addressing energy storage and conversion issues through realizing efficient cycles between fuels and electricity based on the reversible operation of the fuel cell (FC) mode and electrolysis cell (EC) mode. Reliable electrode materials with high electrochemical catalytic activity and sufficient durability are imperatively desired to stretch the talents of RSOCs. Herein, oxygen vacancy engineering is successfully implemented on the Fe-based layered perovskite by introducing Zr4+, which is demonstrated to greatly improve the pristine intrinsic performance, and a novel efficient and durable oxygen electrode material is synthesized. The substitution of Zr at the Fe site of PrBaFe2O5+δ (PBF) enables enlarging the lattice free volume and generating more oxygen vacancies. Simultaneously, the target material delivers more rapid oxygen surface exchange coefficients and bulk diffusion coefficients. The performance of both the FC mode and EC mode is greatly enhanced, exhibiting an FC peak power density (PPD) of 1.26 W cm-2 and an electrolysis current density of 2.21 A cm-2 of single button cells at 700 °C, respectively. The reversible operation is carried out for 70 h under representative conditions, that is, in air and 50% H2O + 50% H2 fuel. Eventually, the optimized material (PBFZr), mixed with Gd0.1Ce0.9O2, is applied as the composite oxygen electrode for the reversible tubular cell and presents excellent performance, achieving 4W and 5.8 A at 750 °C and the corresponding PPDs of 140 and 200 mW cm-2 at 700 and 750 °C, respectively. The enhanced performance verifies that PBFZr is a promising oxygen electrode material for the tubular RSOCs.

The ubiquitin-proteasome system and autophagy: self-digestion for metabolic health.

Type 2 diabetes mellitus (T2DM) is a global health challenge. Therefore, understanding the molecular mechanisms underlying the pathophysiology of T2DM is key to improving current therapies. Loss of protein homeostasis leads to the accumulation of damaged proteins in cells, which results in tissue dysfunction. The elimination of damaged proteins occurs through the ubiquitin-proteasome system (UPS) and autophagy. In this review, we describe the mutual regulation between the UPS and autophagy and the involvement of these two proteolytic systems in metabolic dysregulation, insulin resistance, and T2DM. We propose that alterations in the UPS or autophagy contribute to triggering insulin resistance and the development of T2DM. In addition, these two pathways emerge as promising therapeutic targets for improving insulin resistance.

Pr-Doping Motivating the Phase Transformation of the BaFeO3-δ Perovskite as a High-Performance Solid Oxide Fuel Cell Cathode.

Intermediate temperature solid oxide fuel cells (IT-SOFCs) have been extensively studied due to high efficiency, cleanliness, and fuel flexibility. To develop highly active and stable IT-SOFCs for the practical application, preparing an efficient cathode is necessary to address the challenges such as poor catalytic activity and CO2 poisoning. Herein, an efficient optimized strategy for designing a high-performance cathode is demonstrated. By motivating the phase transformation of BaFeO3-δ perovskites, achieved by doping Pr at the B site, remarkably enhanced electrochemical activity and CO2 resistance are thus achieved. The appropriate content of Pr substitution at Fe sites increases the oxygen vacancy concentration of the material, promotes the reaction on the oxygen electrode, and shows excellent electrochemical performance and efficient catalytic activity. The improved reaction kinetics of the BaFe0.95Pr0.05O3-δ (BFP05) cathode is also reflected by a lower electrochemical impedance value (0.061 Ω·cm2 at 750 °C) and activation energy, which is attributed to high surface oxygen exchange and chemical bulk diffusion. The single cells with the BFP05 cathode achieve a peak power density of 798.7 mW·cm-2 at 750 °C and a stability over 50 h with no observed performance degradation in CO2-containing gas. In conclusion, these results represent a promising optimized strategy in developing electrode materials of IT-SOFCs.

Achieving Highly Efficient Carbon Dioxide Electrolysis by In Situ Construction of the Heterostructure.

The design of active cathode catalysts, with abundant active sites and outstanding catalytic activity for CO2 electroreduction, is important to promote the development of solid oxide electrolysis cells (SOECs). Herein, A-site-deficient perovskite oxide (La0.2Sr0.8)0.9Ti0.5Mn0.4Cu0.1O3-δ (LSTMC) is synthesized and studied as a promising cathode for SOECs. Cu nanoparticles can be rapidly and uniformly in situ-exsolved under reducing conditions. The heterostructure formed by the exsoluted Cu and LSTMC provides abundant active sites for the catalytic conversion of CO2 to CO. Combined with the remarkable oxygen-ion transport capacity of the LSTMC substrate, the specially designed Cu@LSTMC cathode exhibits a dramatically improved electrochemical performance. Furthermore, first-principles calculations proposed a mechanism for the adsorption and activation of CO2 by the heterostructure. Electrochemically, the Cu@LSTMC presents a high current density of 2.82 A cm-2 at 1.8 V and 800 °C, which is about 2.5 times higher than that of LSTM (1.09A cm-2).

Evaluation of correlation between sagittal balance and plantar pressure distributions in adolescent idiopathic scoliosis: A pilot study.

BACKGROUND: To evaluate the correlation between baropodometric parameters and sagittal parameters for adolescent idiopathic scoliosis. METHODS: 44 volunteers (7 males and 37 females) were recruited. All participants were diagnosed as adolescent idiopathic scoliosis by X-ray before baropodometric study. Sagittal parameters included thoracic kyphosis, lumbar lordosis, sagittal vertical axis, pelvic tilt, sacral slope and pelvic incidence. A static baropodometry was performed for each patient. The foot area was divided into four quadrants. The contact surface and weight percentage were measured. FINDINGS: Lumbar lordosis was positively correlated to pelvic incidence, sacral slope and (P < 0.001, P < 0.001, respectively). On the major curve side, pelvic tilt showed a positive correlation with all baropodometric parameters (P < 0.05) except forefoot weight percentage. Thoracic kyphosis showed negative correlations with contact surface and weight percentage of the forefoot (P = 0.04, 0.02 respectively) but no correlation with any rearfoot feature. Lumbar lordosis, sagittal vertical axis, pelvic incidence and sacral slope were not in correlation with plantar pressure. On the opposite side, sagittal profile showed no obvious correlation with any baropodometric parameter. INTERPRETATION: In scoliosis, sagittal balance is closely correlated to plantar pressure distributions. Baropodometry is a feasible method to assess sagittal balance.

Enhancing Polysulfide Confinement and Electrochemical Kinetics by Amorphous Cobalt Phosphide for Highly Efficient Lithium-Sulfur Batteries.

The application of lithium-sulfur (Li-S) batteries is severely hampered by the shuttle effect and sluggish redox kinetics. Herein, amorphous cobalt phosphide grown on a reduced graphene oxide-multiwalled carbon nanotube (rGO-CNT-CoP(A)) is designed as the sulfur host to conquer the above bottlenecks. The differences between amorphous cobalt phosphide (CoP) and crystalline CoP on the surface adsorption as well as conversion of lithium polysulfides (LiPSs) are investigated by systematical experiments and density-functional theory (DFT) calculations. Specifically, the amorphous CoP not only strengthens the chemical adsorption to LiPSs but also greatly accelerates liquid-phase conversions of LiPSs as well as the nucleation and growth of Li2S. DFT calculation reveals that the amorphous CoP possesses higher binding energies and lower diffusion energy barriers for LiPSs. In addition, the amorphous CoP features reduced energy gap and the increased electronic concentrations of adsorbed LiPSs near Fermi level. These characteristics contribute to the enhanced chemisorption ability and the accelerated redox kinetics. Simultaneously, the prepared S/rGO-CNT-CoP(A) electrode delivers an impressive initial capacity of 872 mAh g-1 at 2 C and 617 mAh g-1 can be obtained after 200 cycles, exhibiting excellent cycling stability. Especially, it achieves outstanding electrochemical performance even under high sulfur loading (5.3 mg cm-2) and lean electrolyte (E/S = 7 µLE mg-1S) conditions. This work exploits the application potential for amorphous materials and contributes to the development of highly efficient Li-S batteries.

The dialogue between the ubiquitin-proteasome system and autophagy: Implications in ageing.

Dysregulated proteostasis is one of the hallmarks of ageing. Damaged proteins may impair cellular function and their accumulation may lead to tissue dysfunction and disease. This is why protective mechanisms to safeguard the cell proteome have evolved. These mechanisms consist of cellular machineries involved in protein quality control, including regulators of protein translation, folding, trafficking and degradation. In eukaryotic cells, protein degradation occurs via two main pathways: the ubiquitin-proteasome system (UPS) and the autophagy-lysosome pathway. Although distinct pathways, they are not isolated systems and have a complementary nature, as evidenced by recent studies. These findings raise the question of how autophagy and the proteasome crosstalk. In this review we address how the two degradation pathways impact each other, thereby adding a new layer of regulation to protein degradation. We also analyze the implications of the UPS and autophagy in ageing.

H2S Regulation of Metabolism in Cucumber in Response to Salt-Stress Through Transcriptome and Proteome Analysis.

In a previous study, we found that H2S alleviates salinity stress in cucumber by maintaining the Na+/K+ balance and by regulating H2S metabolism and the oxidative stress response. However, little is known about the molecular mechanisms behind H2S-regulated salt-stress tolerance in cucumber. Here, an integrated transcriptomic and proteomic analysis based on RNA-seq and 2-DE was used to investigate the global mechanism underlying H2S-regulated salt-stress tolerance. In total, 11,761 differentially expressed genes (DEGs) and 61 differentially expressed proteins (DEPs) were identified. Analysis of the pathways associated with the DEGs showed that salt stress enriched expression of genes in primary and energy metabolism, such as photosynthesis, carbon metabolism and biosynthesis of amino acids. Application of H2S significantly decreased these DEGs but enriched DEGs related to plant-pathogen interaction, sulfur-containing metabolism, cell defense, and signal transduction pathways. Notably, changes related to sulfur-containing metabolism and cell defense were also observed through proteome analysis, such as Cysteine synthase 1, Glutathione S-transferase U25-like, Protein disulfide-isomerase, and Peroxidase 2. We present the first global analysis of the mechanism underlying H2S regulation of salt-stress tolerance in cucumber through tracking changes in the expression of specific proteins and genes.

Honeycombed Porous, Size-Matching Architecture for High-Performance Hybrid Direct Carbon Fuel Cell Anode.

Direct carbon fuel cells (DCFCs) demonstrate both superior electrical efficiency and fuel utilization compared to all other types of fuel cells, and it will be the most promising carbon utilization technology if the sluggish anode reaction kinetics that derives from the use of solid fuel can be addressed. Herein, the electrode morphology and fuel particle size are comprehensively considered to fabricate an efficient DCFC anode skeleton. A honeycombed and size-matching anode architecture with dual-scale porous structure is developed by water droplet templating, which demonstrates an efficient strategy to address the challenge of poor carbon reactivity and improve the electrochemical performance of DCFCs. Single cell with this designed anode framework demonstrates excellent performance, and the maximum power density is as high as 765 mW cm-2 at 800 °C when using the matching carbon fuel. The size-matching between carbon fuel and anode framework shows a remarkable effect on the improvement of mass-transfer processes at the anodes. The significant contribution of the difficult electrochemical oxidation of carbon to the output performance is also demonstrated. These results represent a promising structural design strategy in developing high-performing fuel cells.

Boosting the Electrochemical Performance of Fe-Based Layered Double Perovskite Cathodes by Zn2+ Doping for Solid Oxide Fuel Cells.

Mixed oxygen ionic and electronic conduction is a vital function for cathode materials of solid oxide fuel cells (SOFCs), ensuring high efficiency and low-temperature operation. However, Fe-based layered double perovskites, as a classical family of mixed oxygen ionic and electronic conducting (MIEC) oxides, are generally inactive toward the oxygen reduction reaction due to their intrinsic low electronic and oxygen-ion conductivity. Herein, Zn doping is presented as a novel pathway to improve the electrochemical performance of Fe-based layered double perovskite oxides in SOFC applications. The results demonstrate that the incorporation of Zn ions at Fe sites of the PrBaFe2O5+δ (PBF) lattice simultaneously regulates the concentration of holes and oxygen vacancies. Consequently, the oxygen surface exchange coefficient and oxygen-ion bulk diffusion coefficient of Zn-doped PBF are significantly tuned. The enhanced mixed oxygen ionic and electronic conduction is further confirmed by a lower polarization resistance of 0.0615 and 0.231 Ω·cm2 for PrBaFe1.9Zn0.1O5+δ (PBFZ0.1) and PBF, respectively, which is measured using symmetric cells at 750 °C. Moreover, the PBFZ0.1-based single cell demonstrates the highest output performance among the reported Fe-based layered double perovskite cathodes, rendering a peak power density of 1.06 W·cm-2 at 750 °C and outstanding stability over 240 h at 700 °C. The current work provides a highly effective strategy for designing cathode materials for next-generation SOFCs.