Which works better? Comparing the multiple effects of heterogeneous environmental regulations on urban green economic transformation in China.

The coordination of heterogeneous environmental regulations (HER) is crucial for promoting regional green synergistic development. The primary objective of this study is to evaluate the impact of various heterogeneous environmental regulations (HER) on the green economic transformation (GET) of cities in China. We developed a comprehensive index system to measure the GET across three dimensions: the level of economic green development, the capacity for resource and environmental support, and the level of support for green transformation. This study examines 284 Chinese cities during the period from 2011 to 2020. Applying a dynamic panel model, a dynamic Durbin model, and a synergy model, we explore direct effects, spatial effects, and asymmetry of synergistic effects of HER on the GET of Chinese cities. We find that, in terms of direct effects, all environmental regulations can promote urban GET, though the magnitude of effects is heterogeneous. In terms of spatial spillover effects, market-incentive and public-participation environmental policies in a given region inhibit green transformation in neighboring regions, while overall environmental regulation and command-and-control regulation have significant positive effects on neighboring regions' green transformation. Furthermore, the total short-term effect of HER is significantly higher than the total long-term effect. The synergistic effect of HER is positive for the Beijing-Tianjin-Hebei city cluster and the Yangtze River Delta city cluster. This study can provide valuable policy implications for regional coordinated development with a low-carbon focus.

Functional analysis of two caffeoyl-coenzyme 3 a-o-methyltransferase involved in pear lignin metabolism.

Caffeoyl-coenzyme 3 A-O-methyltransferase (CCoAOMT) plays a crucial role in the lignin synthesis in many higher plants. In this study, nine PbCCoAOMT genes in total were identified from pear, and classified into six categories. We treated pear fruits with hormones abscisic acid (ABA) and methyl jasmonate (MeJA) and salicylic acid (SA) and observed differential expression levels of these genes. Through qRT-PCR, we also preliminarily identified candidate PbCCoAOMT gene, potentially involved in lignin synthesis in pear fruits. Additionally, the overexpression of PbCCoAOMT1/2 in Arabidopsis and pear fruits increased in lignin content. Enzymatic assays showed that recombinant PbCCoAOMT1/2 proteins have similar enzymatic activity in vitro. The Y1H (Yeast one-hybrid) and dual luciferase (dual-LUC) experiments demonstrated that PbMYB25 can bind to the AC elements in the promoter region of the PbCCoAOMT1 gene. Our findings suggested that the PbCCoAOMT1 and PbCCoAOMT2 genes may contribute to the synthesis of lignin and provide insights into the mechanism of lignin biosynthesis and stone cell development in pear fruits.

Optimizing Double-Fibril Network Morphology via Solid Additive Strategy Enables Binary All-Polymer Solar Cells with 19.50% Efficiency.

Double-fibril network morphology (DFNM), in which the donor and the acceptor can self-assemble into a double-fibril structure, is beneficial for exciton dissociation and charge transport in organic solar cells. Herein, it is demonstrated that such DFNM can be constructed and optimized in all-polymer solar cells (all-PSCs) with the assistance of 2-alkoxynaphthalene volatile solid additives. It is revealed that the incorporation of 2-alkoxynaphthalene can induce a stepwise regulation in the aggregation of donor and acceptor molecules during film casting and thermal annealing processes. Through altering the alkoxy of 2-alkoxynaphthalene solid additives, both the intermolecular interactions and molecular miscibility with the host materials can be precisely tuned, which allows for the optimization of the molecular aggregation process and facilitation of molecular self-assembly, and thus leading to reinforced molecular packing and optimized DFNM. As a result, an unprecedented efficiency of 19.50% (certified as 19.1%) is obtained for 2-ethoxynaphthalene-processed PM6:PY-DT-X all-PSCs with excellent photostability (T80 = 1750 h). This work reveals that the optimization of DFNM via solid additive strategy is a promising avenue to boosting the performance of all-PSCs.

Conjugation-Broken Dimer Acceptors Enable High-Efficiency, Stable, and Flexibility-Robust Organic Solar Cells.

Dimer acceptors in organic solar cells (OSCs) offer distinct advantages, including a well-defined molecular structure and excellent batch-to-batch reproducibility. Their high glass transition temperature (Tg) aids in achieving an optimal kinetic morphology, thereby enhancing device stability. Currently, most of dimer acceptor materials are linked with conjugated units in order to obtain high power conversion efficiencies (PCEs). In this study, different from previous works on conjugation-linked dimer acceptors, a novel series of dimer acceptors are synthesized (named T1, T4, T6, and T12), each linked with different flexible alkyl linkers, and investigated their PCEs, device stability, and flexibility robustness. When blended with PM6, the T6-based device achieves a PCE of 17.09%, comparable to the fully conjugated T0-based device's PCE of 17.12%. The molecular dynamics simulations and density functional theory calculations suggested that flexible conjugation-broken linkers (FCBLs) promote intermolecular electronic couplings, thereby maintaining good electron mobilities of dimer acceptors. Notably, the T6-based device exhibits impressive long-term stability with a T80 lifetime of 1427 h, while in the T0-based device, T80 is only 350 h. The present work has thus established the relationship between the length of flexible alkyl linkers in such dimer acceptors and the performance and stability of OSCs, which is important to further designing new materials for the fabrication of efficient and stable OSCs.

Pathogenicity and Genomic Characteristics Analysis of Pasteurella multocida Serotype A Isolated from Argali Hybrid Sheep.

Respiratory diseases arising from co-infections involving Pasteurella multocida (P. multocida) and Mycoplasma ovipneumoniae (Mo) pose a substantial threat to the sheep industry. This study focuses on the isolation and identification of the P. multocida strain extracted from the lung tissue of an argali hybrid sheep infected with Mo. Kunming mice were used as a model to assess the pathogenicity of P. multocida. Subsequently, whole genome sequencing (WGS) of P. multocida was conducted using the Illumina NovaSeq PE150 platform. The whole genome sequencing analysis involved the construction of an evolutionary tree to depict conserved genes and the generation of a genome circle diagram. P. multocida, identified as serotype A, was named P. multocida SHZ01. Our findings reveal that P. multocida SHZ01 infection induces pathological manifestations, including hemorrhage and edema, in mice. The phylogenetic tree of conserved genes analyzing P. multocida from different countries and different host sources indicates close relatedness between the P. multocida SHZ01 strain and the P. multocida 40540 strain (A:12), originating from turkeys in Denmark. The genome of P. multocida SHZ01 comprises 2,378,508 base pairs (bp) with a GC content of 40.89%. Notably, this strain, designated P. multocida, exhibits two distinct gene islands and harbors a total of 80 effector proteins associated with the Type III Secretion System (T3SS). The P. multocida SHZ01 strain harbors 82 virulence genes and 54 resistance genes. In the P. multocida SHZ01 strain, the proteins, genes, and related GO and KEGG pathways have been annotated. Exploring the relationship between these annotations and the pathogenicity of the P. multocida SHZ01 strain would be valuable. This study holds great significance in further understanding the pathogenesis and genetic characteristics of the sheep-derived P. multocida SHZ01 strain. Additionally, it contributes to our understanding of respiratory diseases in the context of co-infection.

Microwave-Solvothermal Synthesis of Mesoporous CeO2/CNCs Nanocomposite for Enhanced Room Temperature NO2 Detection.

Nitrogen dioxide (NO2) gas sensors are pivotal in upholding environmental integrity and human health, necessitating heightened sensitivity and exceptional selectivity. Despite the prevalent use of metal oxide semiconductors (MOSs) for NO2 detection, extant solutions exhibit shortcomings in meeting practical application criteria, specifically in response, selectivity, and operational temperatures. Here, we successfully employed a facile microwave-solvothermal method to synthesize a mesoporous CeO2/CNCs nanocomposite. This methodology entails the rapid and comprehensive dispersion of CeO2 nanoparticles onto helical carbon nanocoils (CNCs), resulting in augmented electronic conductivity and an abundance of active sites within the composite. Consequently, the gas-sensing sensitivity of the nanocomposite at room temperature experienced a notable enhancement. Moreover, the presence of cerium oxide and the conversion of Ce3+ and Ce4+ ions facilitated the generation of oxygen vacancies in the composites, thereby further amplifying the sensing performance. Experimental outcomes demonstrate that the nanocomposite exhibited an approximate 9-fold increase in response to 50 ppm NO2 in comparison to pure CNCs at room temperature. Additionally, the CeO2/CNCs sensor displayed remarkable selectivity towards NO2 when exposed to gases such as NH3, CO, SO2, CO2, and C2H5OH. This straightforward microwave-solvothermal method presents an appealing strategy for the research and development of intelligent sensors based on CNCs nanomaterials.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer.

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Non-halogenated Solvent-Processed Organic Solar Cells with Approaching 20 % Efficiency and Improved Photostability.

The development of high-efficiency organic solar cells (OSCs) processed from non-halogenated solvents is crucially important for their scale-up industry production. However, owing to the difficulty of regulating molecular aggregation, there is a huge efficiency gap between non-halogenated and halogenated solvent processed OSCs. Herein, we fabricate o-xylene processed OSCs with approaching 20 % efficiency by incorporating a trimeric guest acceptor named Tri-V into the PM6:L8-BO-X host blend. The incorporation of Tri-V effectively restricts the excessive aggregation of L8-BO-X, regulates the molecular packing and optimizes the phase-separation morphology, which leads to mitigated trap density states, reduced energy loss and suppressed charge recombination. Consequently, the PM6:L8-BO-X:Tri-V-based device achieves an efficiency of 19.82 %, representing the highest efficiency for non-halogenated solvent-processed OSCs reported to date. Noticeably, with the addition of Tri-V, the ternary device shows an improved photostability than binary PM6:L8-BO-X-based device, and maintains 80 % of the initial efficiency after continuous illumination for 1380 h. This work provides a feasible approach for fabricating high-efficiency, stable, eco-friendly OSCs, and sheds new light on the large-scale industrial production of OSCs.

Brain tumor detection based on a novel and high-quality prediction of the tumor pixel distributions.

The work presented in this paper is in the area of brain tumor detection. We propose a fast detection system with 3D MRI scans of Flair modality. It performs 2 functions, predicting the gray level distribution and location distribution of the pixels in the tumor regions and generating tumor masks with pixel-wise precision. To facilitate 3D data analysis and processing, we introduce a 2D histogram presentation encompassing the gray-level distribution and pixel-location distribution of a 3D object. In the proposed system, specific 2D histograms highlighting tumor-related features are established by exploiting the left-right asymmetry of a brain structure. A modulation function, generated from the input data of each patient case, is applied to the 2D histograms to transform them into coarsely or finely predicted distributions of tumor pixels. The prediction result helps to identify/remove tumor-free slices. The prediction and removal operations are performed to the axial, coronal and sagittal slice series of a brain image, transforming it into a 3D minimum bounding box of its tumor region. The bounding box is utilized to finalize the prediction and generate a 3D tumor mask. The proposed system has been tested extensively with the data of more than 1200 patient cases in BraTS2018∼2021 datasets. The test results demonstrate that the predicted 2D histograms resemble closely the true ones. The system delivers also very good tumor detection results, comparable to those of state-of-the-art CNN systems with mono-modality inputs. They are reproducible and obtained at an extremely low computation cost and without need for training.

MiR-339-5p inhibits replication of porcine reproductive and respiratory syndrome virus by targeting viral gene regions.

Porcine reproductive and respiratory syndrome virus (PRRSV) is a variable virus, whose spread cannot be totally stopped by vaccination. PRRSV infection results in abortion and respiratory symptoms in pregnant pigs. One crucial component of the anti-viral infection strategy is microRNA (miRNA), a class of multifunctional small molecules. It is unknown whether miR-339-5p can specifically target the PRRSV gene and prevent the virus from replicating, despite the fact that miR-339-5p is markedly up-regulated during the PRRSV infection. In this pursuit, the present study revealed that the two PRRSV areas targeted by miR-339-5p were PRRSV nsp2-3378 to 3403 and PRRSV nsp2-3112 to 3133 using the miRanda program. Dual luciferase reporter assays showed that the miR-339-5p target region of the PRRSV gene sequence exhibited 100% homology and was highly conserved. Furthermore, the ability of miR-339-5p to target PRRSV gene areas was verified. It was found that the overexpression of miR-339-5p markedly reduced the PRRSV replication through PRRSV infection trials. The precursor sequence of ssc-miR-339-5p was amplified using the DNA of pig lung tissue as a template in order to create a fragment of 402 bp of porcine-derived miR-339-5p precursor sequence, which was then used to produce the eukaryotic expression plasmid of miR-339-5p. In conclusion, miR-339-5p can target the specific PRRSV gene areas and prevent PRRSV replication, offering fresh perspectives for the creation of medications that combat the PRRSV infection.

Solid Additive Dual-Regulates Spectral Response Enabling High-Performance Semitransparent Organic Solar Cells.

Semi-transparent organic solar cells (ST-OSCs) possess significant potential for applications in vehicles and buildings due to their distinctive visual transparency. Conventional device engineering strategies are typically used to optimize photon selection and utilization at the expense of power conversion efficiency (PCE); moreover, the fixed spectral utilization range always imposes an unsatisfactory upper limit to its light utilization efficiency (LUE). Herein, a novel solid additive named 1,3-diphenoxybenzene (DB) is employed to dual-regulate donor/acceptor molecular aggregation and crystallinity, which effectively broadens the spectral response of ST-OSCs in near-infrared region. Besides, more visible light is allowed to pass through the devices, which enables ST-OSCs to possess satisfactory photocurrent and high average visible transmittance (AVT) simultaneously. Consequently, the optimal ST-OSC based on PP2+DB/BTP-eC9+DB achieves a superior LUE of 4.77%, representing the highest value within AVT range of 40-50%, which also correlates with the formation of multi-scale phase-separated morphology. Such results indicate that the ST-OSCs can simultaneously meet the requirements for minimum commercial efficiency and plant photosynthesis when integrated with the roofs of agricultural greenhouses. This work emphasizes the significance of additives to tune the spectral response in ST-OSCs, and charts the way for organic photovoltaics in economically sustainable agricultural development.

Spatiotemporal distribution and dynamics evolution of artificial intelligence development in China.

The quantified measurement and comprehensive analysis of artificial intelligence development (AIDEV) are vital for countries to form AI industrial ecology and promote the long-term development of regional AI technology. Based on the innovation ecosystems (IE) theory, this paper constructs an evaluation system to measure and analyze the spatiotemporal distribution and dynamic evolution of the AIDEV in China from 2011 to 2020. The results show that the AIDEV of China presents an overall upward trend and an obvious unbalance in the spatial distribution which is "eastern > central > western". Meanwhile, the provinces of low-level AIDEV are catching up with the high-level provinces, which leads to the regional difference of AIDEV narrowing. Moreover, the concentration and polarization phenomenon of AIDEV in China has been weakening and the AIDEV will continue to increase in the next three years. Further, there is a significantly positive spatial autocorrelation of AIDEV. Finally, high AIDEV provinces will increase the probability of surrounding provinces' AIDEV to develop. This paper expands the research stream in the field of AI research, extends the application scenarios of IE theory, and puts forward some relevant policy recommendations.

Template-Assisted Synthesis of 2D Perovskite Grating Single Crystal Films at Low Temperatures for UV Polarization-Sensitive Photodetectors.

2D perovskites have attracted tremendous attention due to their superior optoelectronic properties and potential applications in optoelectronic devices. Especially, the larger bandgap of 2D perovskite means that they are suitable for UV photodetection. However, the layered structure of 2D perovskites hinders the interlayer carrier transport, which limits the improvement of device performance. Therefore, nanoscale structures are normally used to enhance the light absorption ability, which is an effective strategy to improve the photocurrent in 2D perovskite-based photodetectors. Herein, a template-assisted low-temperature method is proposed to fabricate 2D perovskite ((C6H5C2H4NH3)2PbBr4, (PEA)2PbBr4) grating single crystal films (GSCFs). The crystallinity of the (PEA)2PbBr4 GSCFs is significantly improved due to the slow evaporation of the precursor solution under low temperatures. Based on this high crystalline quality and extremely ordered microstructures, the metal-semiconductor-metal photodetectors are assembled. Finite-different time-domain (FDTD) simulation and experiment indicate that the GSCF-based photodetectors exhibit significantly improved performance in comparison with the plane devices. The optimized 2D perovskite photodetectors are sensitive to UV light and demonstrate a responsivity and detectivity of 28.6 mA W-1 and 2.4 × 1011 Jones, respectively. Interestingly, the photocurrent of this photodetector varies as the angle of the incident polarized light, resulting in a high polarization ratio of 1.12.

Simple and Efficient Synthesis of Novel Tetramers with Enhanced Glass Transition Temperature for High-Performance and Stable Organic Solar Cells.

Oligomer acceptors in organic solar cells (OSCs) have garnered substantial attention owing to their impressive power conversion efficiency (PCE) and long-term stability. However, the simple and efficient synthesis of oligomer acceptors with higher glass transition temperatures (Tg ) remains a formidable challenge. In this study, we propose an innovative strategy for the synthesis of tetramers, denoted as Tet-n, with elevated Tg s, achieved through only two consecutive Stille coupling reactions. Importantly, our strategy significantly reduces the redundancy in reaction steps compared to conventional methods for linear tetramer synthesis, thereby improving both reaction efficiency and yield. Furthermore, the OSC based on PM6:Tet-1 attains a high PCE of 17.32 %, and the PM6:L8-BO:Tet-1 ternary device achieves an even more higher PCE of 19.31 %. Remarkably, the binary device based on the Tet-1 tetramer demonstrates outstanding operational stability, retaining 80 % of the initial efficiency (T80 ) even after 1706 h of continuous illumination, which is primarily attributed to the enhanced Tg (247 °C) and lower diffusion coefficient (1.56×10-27  cm2 s-1 ). This work demonstrates the effectiveness of our proposed approach in the straightforward and efficient synthesis of tetramers materials with higher Tg s, thus offering a viable pathway for developing high-efficiency and stable OSCs.

Surface Microstructure Engineering in MAPbBr3 Microsheets for Performance-Enhanced Photodetectors.

Metal halide-perovskite-based photodetectors have recently emerged as a class of promising optoelectronic devices in various fields. Meanwhile, nano/microstructuring perovskite-based photodetectors are a facile integration with complementary metal-oxide semiconductors for miniaturized imaging systems. However, there are still challenges to be overcome in reducing the losses caused by light reflection on the surface of microstructural perovskites. In this work, surface microstructure engineering is employed in MAPbBr3 microsheets for reducing light reflection and improving light absorption, resulting in high-performance perovskite photodetectors. MAPbBr3 microsheets, which possess different surface morphologies of flat, upright hemisphere arrays and inverted hemisphere arrays (IHAs), are fabricated by a simple microstructure template-assisted space confinement process. The light absorption capacity of IHA MAPbBr3 is significantly higher than that of the other two structures. Hence, IHA photodetectors with excellent figures of merit, including low dark current, decent responsivity, and fast speed, are achieved. Furthermore, the noise of the IHA photodetectors is only ∼10-13 A/Hz, which results in the superior sensitivity for weak light detection with a specific detectivity up to 1011 Jones. Our results demonstrate that surface engineering is a simple, low-cost, yet effective approach to improve the performance of nano-/micro-optoelectronic devices.

Distribution pattern, molecular transmission networks, and phylodynamic of hepatitis C virus in China.

In China, few molecular epidemiological data on hepatitis C virus (HCV) are available and all previous studies were limited by small sample sizes or specific population characteristics. Here, we report characterization of the epidemic history and transmission dynamics of HCV strains in China. We included HCV sequences of individuals belonging to three HCV surveillance programs: 1) patients diagnosed with HIV infection at the Beijing HIV laboratory network, most of whom were people who inject drugs and former paid blood donors, 2) men who have sex with men, and 3) the general population. We also used publicly available HCV sequences sampled in China in our study. In total, we obtained 1,603 Ns5b and 865 C/E2 sequences from 1,811 individuals. The most common HCV strains were subtypes 1b (29.1%), 3b (25.5%) and 3a (15.1%). In transmission network analysis, factors independently associated with clustering included the region (OR: 0.37, 95% CI: 0.19-0.71), infection subtype (OR: 0.23, 95% CI: 0.1-0.52), and sampling period (OR: 0.43, 95% CI: 0.27-0.68). The history of the major HCV subtypes was complex, which coincided with some important sociomedical events in China. Of note, five of eight HCV subtype (1a, 1b, 2a, 3a, and 3b), which constituted 81.8% HCV strains genotyped in our study, showed a tendency towards decline in the effective population size during the past decade until present, which is a good omen for the goal of eliminating HCV by 2030 in China.

Auxiliary sequential deposition enables 19%-efficiency organic solar cells processed from halogen-free solvents.

High-efficiency organic solar cells are often achieved using toxic halogenated solvents and additives that are constrained in organic solar cells industry. Therefore, it is important to develop materials or processing methods that enabled highly efficient organic solar cells processed by halogen free solvents. In this paper, we report an innovative processing method named auxiliary sequential deposition that enables 19%-efficiency organic solar cells processed by halogen free solvents. Our auxiliary sequential deposition method is different from the conventional blend casting or sequential deposition methods in that it involves an additional casting of dithieno[3,2-b:2',3'-d]thiophene between the sequential depositions of the donor (D18-Cl) and acceptor (L8-BO) layers. The auxiliary sequential deposition method enables dramatic performance enhancement from 15% to over 18% compared to the blend casting and sequential deposition methods. Furthermore, by incorporating a branched-chain-engineered acceptor called L8-BO-X, device performance can be boosted to over 19% due to increased intermolecular packing, representing top-tier values for green-solvent processed organic solar cells. Comprehensive morphological and time-resolved characterizations reveal that the superior blend morphology achieved through the auxiliary sequential deposition method promotes charge generation while simultaneously suppressing charge recombination. This research underscores the potential of the auxiliary sequential deposition method for fabricating highly efficient organic solar cells using environmentally friendly solvents.

Short-term effects of air pollution and weather changes on the occurrence of acute aortic dissection in a cold region.

Background: Air pollution and severe weather conditions can adversely affect cardiovascular disease emergencies. Nevertheless, it remains unclear whether air pollutants and low ambient temperature can trigger the occurrence of acute aortic dissection (AAD) in cold regions. Methods: We applied a retrospective analysis to assess the short-term effects of air pollution and ambient temperature on the occurrence of AAD in Harbin, China. A total of 564 AAD patients were enrolled from a major hospital in Harbin between January 1, 2017, and February 5, 2021. Weather condition data and air pollutant concentrations, including fine particulate matter smaller than 10 µm (PM10) and 2.5 µm in diameter (PM2.5), nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), and ozone (O3), were collected every day. Conditional logistic regressions and correlation analysis were applied to analyze the relationship of environmental and atmospheric parameters with AAD occurrence at lags of 0 to 7 days. Specifically, we appraised the air quality index, CO, NO2, SO2, O3, PM10, PM2.5, temperature, dew point temperature, atmospheric pressure, and cloud amount. Results: A total of 1,496 days at risk were assessed, of which 564 patients developed AAD. Specifically, AAD did not occur on 1,043 (69.72%) days, while 1 or more cases occurred on 453 (30.28%) days. Several pollution and weather predictors for AAD were confirmed by multilevel modeling. The air quality index (p = 0.0012), cloud amount (p = 0.0001), and concentrations of PM2.5 (p = 0.0004), PM10 (p = 0.0013), NO2 (p = 0.0007) and O3 (p = 0.0001) predicted AAD as early as 7 days before the incident (lag of 7 days) in the study period. However, only concentrations of the air pollutants NO2 (p = 0.0468) and O3 (p = 0.011) predicted the occurrence of AAD after the COVID-19 outbreak. Similar predictive effects were observed for temperature, dew point temperature, and atmospheric pressure (all p < 0.05) on all days. Conclusion: The risk of AAD is closely related to air pollution and weather characteristics in Harbin. While causation was not determined, the impact of air pollutants on the risk of AAD was reduced after the COVID-19 outbreak.

Facile, Versatile and Stepwise Synthesis of High-Performance Oligomer Acceptors for Stable Organic Solar Cells.

Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long-term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri-Y6-OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by-products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri-Y6-OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T80 ) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6-OD-based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.

Green-Processed Non-Fullerene Organic Solar Cells Based on Y-Series Acceptors.

The development of environmentally friendly and sustainable processes for the production of high-performance organic solar cells (OSCs) has become a critical research area. Currently, Y-series electron acceptors are widely used in high-performance OSCs, achieving power conversion efficiencies above 19%. However, these acceptors have large fused conjugated backbones that are well-soluble in halogenated solvents, such as chloroform and chlorobenzene, but have poor solubility in non-halogenated green solvents. To overcome this challenge, recent studies have focused on developing green-processed OSCs that use non-chlorinated and non-aromatic solvents to dissolve bulk-heterojunction photoactive layers based on Y-series electron acceptors, enabling environmentally friendly fabrication. In this comprehensive review, an overview of recent progress in green-processed OSCs based on Y-series acceptors is provided, covering the determination of Hansen solubility parameters, the use of non-chlorinated solvents, and the dispersion of conjugated nanoparticles in water/alcohol. It is hoped that the timely review will inspire researchers to develop new ideas and approaches in this important field, ultimately leading to the practical application of OSCs.