Effect of functional groups in strawberry flavoring on pea protein-flavor interactions: Potential applicable in flavor formulation for plant-based protein aqueous foods.

This research aimed to explore binding interactions between pea protein isolate (PPI) and selected strawberry flavorings including vanillin, γ-decalactone, furaneol, and (Z)-3-hexen-1-ol within an aqueous system. The results showed that binding affinities of PPI with all various functional group of flavor compounds decreased as temperature increased from 5 °C to 25 °C. Notably, at 25 °C, γ-decalactone displayed the highest binding affinity, followed by vanillin, (Z)-3-hexen-1-ol, and furaneol. Lowest binding was observed for furaneol, explained by its greater lipophilicity (lower partition coefficient values or LogP value) and molecular structure in each functional group in the flavor compounds. Thermodynamically, the interaction between PPI and each selected flavor compound was spontaneous, with evidence suggesting primary forces being hydrophobic interactions or hydrogen bonding/van der Waals forces. Computational molecular docking further confirmed these interaction types. This research provides insights into the interactions between PPI and strawberry flavorings, aiding in the selection of optimal flavor compound proportion for protein-rich products.

Cricket Protein Isolate Extraction: Effect of Ammonium Sulfate on Physicochemical and Functional Properties of Proteins.

Crickets are known to be a promising alternative protein source. However, a negative consumer bias and an off-flavor have become obstacles to the use of these insects in the food industry. In this study, we extracted the protein from commercial cricket powder by employing alkaline extraction-acid precipitation and including ammonium sulfate. The physicochemical and functional properties of the proteins were determined. It was found that, upon including 60% ammonium sulfate, the cricket protein isolate (CPI) had the highest protein content (~94%, w/w). The circular dichroism results indicated that a higher amount of ammonium sulfate drastically changed the secondary structure of the CPI by decreasing its α-helix content and enhancing its surface hydrophobicity. The lowest solubility of CPI was observed at pH 5. The CPI also showed better foaming properties and oil-holding capacity (OHC) compared with the cricket powder. In conclusion, adding ammonium sulfate affected the physicochemical and functional properties of the CPI, allowing it to be used as an alternative protein in protein-enriched foods and beverages.

Optimization of Coffee Oil Extraction from Defective Beans Using a Supercritical Carbon Dioxide Technique: Its Effect on Volatile Aroma Components.

Defective green coffee beans are typically discarded due to their negative impacts on coffee qualities compared to normal beans. However, there are some types of defective beans that can cause volatile aroma compounds after roasting similar to those produced by normal beans. This study aimed to optimize conditions for coffee oil extraction by supercritical carbon dioxide using the response surface methodology (RSM). Furthermore, the investigation assessed the aroma-active compounds and sensory quality in extracted coffee oil. Thus, operational temperatures (33.2-66.8 °C), pressure (10-30 MPa) and ethanol (g) to roasted coffee (g) ratio (0.25:1-1.5:1) were optimized for coffee oil extraction. As a result, different oil yields with different key volatile aroma compounds concentrations were obtained and it was found that the optimum conditions for extraction were a temperature of 50 °C, pressure of 30 MPa, and ethanol (g) to roasted coffee (g) ratio of 1:1 to obtain 6.50% (w/w) coffee oil yield. Key volatile aroma compounds, including furfuryl alcohol, 5-methyl furfural, 2,5-dimethylpyrazine, 4-vinylguaiacol, furfuryl acetate, 3-ethyl-2,5-dimethylpyrazine, thiazole, 1-furfurylpyrrole, pyridine, 2,3-butanediol, and 3-methyl-1,2-cyclopentanedione which contributed to the most preferable burnt, sweet, bready, chocolate-like, and roasted flavors, were quantified. Overall, the results suggested that coffee oil extracted from defective beans could be potentially used as a flavoring agent.

The thermal resistance and targeting release of zein-sodium alginate binary complexes as a vehicle for the oral delivery of riboflavin.

Riboflavin (RF) is one kind of vitamin B, which has low bioavailability due to the low water solubility and the high photosensitivity during food processing and storage. The anti-solvent precipitation method was applied to fabricate a zein-sodium alginate (SA) binary complexes delivery system with the loading of RF, which was aimed to enhance the delivery efficiency, stability, and controlled release of RF in the gastrointestinal (GI) tract. The formation mechanism, physicochemical properties as well as the digestion behaviors were investigated. The incorporation of SA significantly increased the diameter and decreased the surface positive charge of the nanoparticles. The surface morphology of the nanoparticles was characterized using the scanning electron microscope. The FTIR analysis revealed that the electrostatic attraction was the dominant binding force in the formation of the zein-SA binary complexes nanoparticles. In addition, the study on the in vitro release process showed that the zein-SA nanoparticles could delay the release of the RF under the simulated GI tract conditions, which improved their oral bioavailability. In summary, the zein-SA nanoparticle is an effective vehicle for the oral delivery of RF as well as other vitamins and bioactives in the applications of food and nutrition.

Effect of post-harvest drying process on chlorogenic acids, antioxidant activities and CIE-Lab color of Thai Arabica green coffee beans.

Drying process affected the qualitative indicators of green coffees; chlorogenic acid (CGAs), total phenolic content (TPC), antioxidant activities and CIE-lab color to varying degrees. Sun drying and heat pump drying resulted in comparable levels of CGAs and antioxidant activities in green coffees; however, color parameters, especially lightness (L*), differed. Correlation analyses indicated a relationship between specific CGAs, antioxidant activities and color parameters among coffees. PLS analysis revealed that the high contents of 5-caffeoylquinic acid in green coffees did not correlate with antioxidant activities. Results from CGAs contents and PCA analysis provided a linkage to previous research relating important components and quality indices of both green and roasted coffees as affected by postharvest drying. Results indicated that heat pump drying at 50 °C is a viable alternative and possibly superior to sun drying for preserving certain desirable chemical and physical characteristics of green coffee.

Protein deamidation to produce processable ingredients and engineered colloids for emerging food applications.

With the ever-increasing demands for functional and sustainable foods from the general public, there is currently a paradigm shift in the food industry toward the production of novel protein-based diet. Food scientists are therefore motivated to search for natural protein sources and innovative technologies to modify their chemical structure for desirable functionality and thus utilization. Deamidation is a viable, efficient, and attractive approach for modifying proteins owing to its ease of operating, specificity, and cost-effective processes. Over the past three decades, the knowledge of protein deamidation for food applications has evolved drastically, including the development of novel approaches for deamidation, such as protein-glutaminase and ion exchange resin, and their practices in new protein substrate. Thanks to deamidation, enhanced functionalities of food proteins from cereals, legumes, milk, oil seeds and others, and thereby their processabilities as food ingredients have been achieved. Moreover, deamidated proteins have been used to fabricate engineered food colloids, including self-assembled protein particles, protein-metallic complexes, and protein-carbohydrate complexes, which have demonstrated tailored physicochemical properties to modulate oral perception, improve gastrointestinal digestion and bioavailability, and protect and/or deliver bioactive nutrients. Novel bioactivity, altered digestibility, and varied allergenicity of deamidated proteins are increasingly recognized. Therefore, deamidated proteins with novel techno-functional and biological properties hold both promise and challenges for future food applications, and a comprehensive review on this area is critically needed to update our knowledge and provide a better understanding on the protein deamidation and its emerging applications.

Impact of drying process on chemical composition and key aroma components of Arabica coffee.

Influence of heat pump drying (HP at 40, 45 and 50 °C), tray drying (TD) and sun drying (SD) on the quality of Arabica coffee was evaluated. Drying process did not affect the caffeine content, but influenced levels of some amino acids. Sucrose content was higher in HP and TD than in SD green coffees. The perceived aroma of brewed coffee from SD was similar to HP, but differed from TD. Concentrations of 30 important odorants were compared for SD, HP (50 °C) and TD brewed coffees. 2-Furfurylthiol, a key odorant of coffee, was at the same level in SD and HP coffees and lowest in TD samples. Principal component analysis (PCA) separated SD from HP and TD, based on the concentrations of 23 odorants. Combined results of sensory and chemical analyses showed that in comparison to SD, HP was superior to TD for preserving overall flavor quality.

Effect of enzymatic protein deamidation on protein solubility and flavor binding properties of soymilk.

UNLABELLED: The effect of enzymatic deamidation by protein-glutaminase (PG) on protein solubility and flavor binding potential of soymilk was studied. Treatment of soymilk with PG for 2 h (temperature of 44 °C and enzyme:substrate ratio (E/S) of 40 U/g protein) resulted in high degree of protein deamidation (66.4% DD) and relatively low degree of protein hydrolysis (4.25% DH). Deamidated (DSM) and control soymilks (CSM) did not differ with respect to aroma, but differed in taste characteristics by sensory evaluation. Protein solubility in DSM was enhanced at weakly acidic conditions (pH 5.0), but did not differ from non-deamidated soymilk at pH values of 3.0 and 7.0. Odor detection thresholds for the flavor compounds vanillin and maltol were approximately 5 and 3 fold lower, respectively, in DSM than in CSM. Dose-response curves (Fechner's law plots and n exponents from Stevens's power law) further demonstrated that DSM had a lower flavor binding potential than CSM. PG deamidation has the potential to reduce flavor binding problems encountered in high protein-containing foods and beverages. PRACTICAL APPLICATION: The findings of this study can help lead to the development of technology to produce protein-containing foods with improved functional properties, especially protein solubility, and potentially decreased flavor fade problems associated with flavor-protein interactions, especially with carbonyl containing flavor compounds.

Effect of enzymatic deamidation of soy protein by protein-glutaminase on the flavor-binding properties of the protein under aqueous conditions.

The effect of the enzymatic deamidation by protein-glutaminase (PG) on flavor-binding properties of soy protein isolate (SPI) under aqueous conditions was evaluated by a modified equilibrium dialysis (ultrafiltration) technique. Binding parameters, such as number of binding sites (n) and binding constants (K), were derived from Klotz plots. The partial deamidation of SPI by PG (43.7% degree of deamidation) decreased overall flavor-binding affinity (nK) at 25 °C for both vanillin and maltol by approximately 9- and 4-fold, respectively. The thermodynamic parameters of binding indicated that the flavor-protein interactions were spontaneous (negative ΔG°) and that the driving force of the interactions shifted from entropy to enthalpy driven as a result of deamidation. Deamidation of soy protein caused a change in the mechanism of binding from hydrophobic interactions or covalent bonding (Schiff base formation) to weaker van der Waals forces or hydrogen bonding.

Optimization of the enzymatic deamidation of soy protein by protein-glutaminase and its effect on the functional properties of the protein.

The effects of enzymatic deamidation by protein-glutaminase (PG) on the functional properties of soy protein isolate (SPI) were studied. Conditions for the deamidation were evaluated by means of response surface methodology (RSM). Optimal conditions based on achieving a high degree of deamidation (DD) with a concurrently low degree of hydrolysis (DH) were 44 °C, enzyme:substrate ratio (E/S) of 40 U/g protein and pH 7.0. Under optimal conditions, both DD and DH increased over time. SDS-PAGE results indicated that lower molecular mass subunits were produced with increasing DD. Far-UV circular dichroism spectra revealed that the α-helix structure decreased with higher DD, while the ß-sheet structure increased until 15 min of deamidation (32.9% DD), but then decreased at higher DD. The solubility of deamidated SPI was enhanced under both acidic and neutral conditions. SPI with higher DD showed better emulsifying properties and greater foaming capacity than SPI, while foaming stability was decreased. It is possible to modify and potentially improve the functional properties of SPI by enzymatic deamidation using PG.