RESUMEN
Microcrystalline cellulose (MCC) is a crucial component in various industries, including pharmaceuticals, culinary, and cosmetics. The growing demand for MCC has spurred research into extraction methods. This study focused on extracting MCC from Ficus benghalensis using acid hydrolysis to convert the alpha-cellulose content of its leaves into MCC. The solvent used in this process was recyclable for further use. The extracted MCC was characterized by its physicochemical properties, including density, yield percentage, and structural characteristics. The yield was approximately 39.68 %, and the density was low at 1.518 g/cm3, making it suitable for filler applications. Fourier transform spectroscopy and UV-visible analysis identified functional groups of cellulose. X-ray diffraction analysis revealed a crystallite size of 1.560 nm and a crystallinity index of 66.43 %, indicating suitability for related applications. ImageJ determined a mean particle size of 36.545 µm, while scanning electron microscopy showed distinct surface orientations. Atomic force microscopy revealed surface roughness, root mean square, ten-point average roughness, skewness, and kurtosis. Elemental analysis indicated high concentrations of carbon (20.1 %) and oxygen (34 %). Based on these physicochemical features, the extracted MCC could be a valuable source for applications such as filler in reinforcement technology and coating material in pharmaceutical products.
RESUMEN
The present surge in environmental consciousness has pushed for the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. As a result of their biocompatibility and biodegradability, Calotropis gigantiea leaf plasticizers (CLP) serve as viable alternatives to chemical plasticizers. First time, the natural plasticizers from the Calotropis leaves were extracted for this study using a suitable chemical approach that was also environmentally friendly. The XRD results showed a reduced crystallinity index of 20.2 % and a crystalline size of 5.3 nm, respectively. TGA study revealed that the CLP has good thermal stability (244 °C). Through FT-IR study, the existence of organic compounds in CLP can be investigated by key functional groups such as alcohol, amine, amide, hydrocarbon, alkene, aromatic, etc. Further the presence of alcoholic, amino, and carboxyl constituents was confirmed by UV investigation. SEM, EDAX analysis, and AFM are used to examine the surface morphology of the isolated plasticizer. SEM pictures reveal rough surfaces on the CLP surface pores, which makes them suitable for plasticizing new bioplastics with improved mechanical properties. Poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable polymer matrix, was used to investigate the plasticization impact after the macromolecules were characterised. The biofilm PBAT/CLP had a thickness of 0.8 mm. In addition, the reinforcement interface was examined using scanning electron microscopy. When CLP is loaded differently in PBAT, the tensile strength and young modulus change from 15.30 to 24.60 MPa and from 137 to 168 MPa, respectively. CLP-reinforced films demonstrated better surface compatibility and enhanced flexibility at a loading of 2 % when compared to pure PBAT films. Considering several documented characteristics, CLP may prove to be an excellent plasticizer for resolving environmental issues in the future.
RESUMEN
The most likely materials for use in packaging are plastics. A lot of synthetic polymers are harming the environment. A plasticizer is required for all polymers to improve their characteristics and workability. The plasticizers come in liquid form and are also derived from fossil fuels, which are harmful to the environment. Producing functional and affordable biopolymer for packaging applications is a difficult task nowadays. The preparation of biofilm for packaging using biopolymer and bioplasticizer is the main aim of this work. The biopolymer poly L-lactic acid (PLA) is used, and the bio plasticizer is extracted from Pedalium murex plant. Chemical and mechanical methods are used to extract the plasticizer. Plasticization of polylactic acid biopolymer was done using the extracted plasticizer at additions of 1 %, 2 %, 3 %, 4 %, and 5 %. FT-IR spectroscopy, X-ray diffraction spectroscopy, and surface roughness values are used to characterise the prepared biofilms. Scanning electron spectroscopy pictures are utilised to evaluate the morphological orientation of the biofilms. Strawberries packed with biofilms are used to evaluate the barrier properties of biofilms using UV spectroscopy analysis. Thermal degradation behaviour is investigated using thermo gravimetric analysis. We examined the mechanical characteristics, such as tensile strength, elongation modulus, and elongation break percentage. The plasticizing effect of the plasticizer raises the elongation break percentage while decreasing the tensile strength and modulus. For 2 % plasticizer addition the elongation break increases and the tensile not much affected. To demonstrate biodegradability and microbial resistance, the soil degradation behaviour and antimicrobial activities were examined.
Asunto(s)
Biopelículas , Embalaje de Alimentos , Plastificantes , Poliésteres , Poliésteres/química , Plastificantes/química , Embalaje de Alimentos/métodos , Biopelículas/efectos de los fármacos , Frutas/química , Biopolímeros/química , Biopolímeros/farmacología , Resistencia a la Tracción , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Bast fibers are defined as those obtained from the outer cell layers of the bast of various plant families. They are finding use in textile applications and are widely used as reinforcements for green composites, as bast fibers are perceived as "sustainable". There is a growing demand for bast fibers across the world due to their renewable and biodegradable nature. The bast fibers are mainly composed of cellulose, which potentially considers the growing techniques, harvesting and extraction processes of bast fibers most used to produce fibers with appropriate quality to apply in the daily lives of modern men and women in contemporary society. This review paper looks at many aspects of natural fibers, with a focus on plant bast fibers, including their impact on prehistoric and historical society. This review shows that bast fibers are competitive compared to man-made fibers in many applications, but variability in mechanical properties and low tenacity may limit their use in high-strengthh composites and extend to, particularly in aerospace, automotive, packaging, building industries, insulation, E-composites (Eco composites), geotextiles and many other applications are currently being explored. Considering, important characteristics of bast fibers include physical, mechanical, and chemical properties. This makes bast fibers one of the most important classes of plant fibers to use as reinforcing agents in thermosetting/thermoplastic polymer matrices. And the effect of bast fibers as reinforcement in the properties of ECO-composites, GREEN-composites, BIO-composites, lightweight composites. Bast fibers play an important role in sustainability, the preservation of the health of the environment, the well-being of the next generation, and even the daily lives of men and women in the contemporary world.
RESUMEN
For the first time, the current work has carried out a chemical treatment of a novel ligno-cellulose fiber that is extracted from the bark of an unexplored plant of Careya arborea. Careya arborea (CA), a flowering tree known for its green berries, thrives in the Indian subcontinent and Afghanistan. This research was focused on extracting fibers from the bark of the Cary tree for the first time to corroborate the influence of chemical treatment on its different characteristics. These CA fibers have a high proportion of cellulose, consisting of 71.17 wt percent, together with 27.86 wt percent of hemicellulose, and a reduced density of 1140 kg/m3, making them a suitable candidate for creating lightweight applications in a variety of industries. Chemical treatment has done on the cay fiber with the concentrations of NaOH 5 (wt%), 10 (wt%), and 15 (wt%) solution mixture to improve their characteristics. Estimated the difference between Chemically processed and non-processed Cary fibers and corroborated in results. We performed a number of experiments, including FTIR, XRD, SEM, EDAX, AFM, and TGA, to fully comprehend the changing properties. Chemical testing showed that cellulose changed from its non-crystalline state to cellulose, proving that the treatment was successful in changing the fibre structure. Additionally, the thermo-gravimetric examination showed higher thermal stability 248 °C-325 °C and a rise in the crystallinity index, indicating the treated fibers' improved potential for high-temperature applications. The treated Cary fibers exhibited excellent surface properties, promising improved adhesion, mechanical performance, offering lightweight and sustainable solutions for diverse applications.
RESUMEN
The current growing environmental awareness has forced the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. Rose petal plasticizers (RPP) act as an actual substitute for chemical plasticizers in this situation as they are biocompatible and biodegradable. Chemical procedures like amination, alkalization, and surface catalysis are used to extract the natural emollients from rose petals. XRD, FT-IR, and UV studies were used to understand the characteristics of the rose petal plasticizer. Based on the XRD data, the RPP's crystallinity size (CS) and crystallinity index (CI) values were determined to be 9.36 nm and 23.87%, respectively. The surface morphology of the isolated plasticizer is investigated using SEM, EDAX analysis and AFM. RPP surface pores with rough surfaces are visible in SEM images, which make them appropriate for plasticizing novel bioplastics with superior mechanical qualities. The plasticizer's heat degradation behaviour is investigated using thermogravimetric and differential thermogram analysis curves. Following the characterization of the synthesised molecules, the plasticization effect was examined using a biodegradable polymer matrix called poly (butylene adipate-co-terephthalate) (PBAT). The reinforcement interface was also examined using scanning electron microscopy analysis. RPP-reinforced films demonstrated greater flexibility and superior surface compatibility at a 5% loading compared to PBAT-only films. Based on a number of reported features, RPP could be a great plasticizer to address future environmental problems.
RESUMEN
Plasticizers are active ingredients added to the polymer to increase its workability. Since synthetic plasticizer is not ecofriendly and toxic in nature, it is a real cause for concern. On this basis, our study focuses on plasticizer extraction from plant-based resources. In this research work, Thespesia populnea leaves are utilized for the isolation of biological macromolecules with a plasticizing effect for biofilm applications. This extraction process is done through solvent extraction, amination, slow pyrolysis, and surface catalysis process. The physico-chemical and microstructural characterization of novel plasticizer particles were studied for the first time. The lower crystallinity index and crystalline size obtained from X-ray diffraction is 50.08 % and 20.45 nm respectively. Energy dispersive spectroscopy, particle sizer analysis, atomic force microscopy, and scanning electron microscopy are used to assess surface morphology of this plasticizer. The thermogram and differential thermal analysis curves give the information about degradation behavior of plasticizers and their thermal stability. The glass transition temperature of the extracted plasticizer is 60.56 °C. The plasticizing effect of the plasticizer is studied through film fabrication of polylactic acid which was blended with the extracted plasticizer. The mechanical property of biofilm was improved with the addition of plasticizer. The elongation break percentage (for 5 % plasticizer 46.12 %) was increased compared to others with moderate tensile strength. However, the tensile and elongation modulus decreases with the increase of plasticizer content. The crystallinity of the PLA film was improved after the plasticization. The thermal stability also increased with 3 % addition of the plasticizer. The isolated plasticizer was soluble in water and its molecular weight ≈380.
Asunto(s)
Plastificantes , Poliésteres , Plastificantes/química , Poliésteres/química , Polímeros/química , Agua/químicaRESUMEN
Utilizing poultry wastes, particularly chicken feathers, in biopolymer composites is seen as an important aspect in lowering the environmental pollution and paving a new path to sustainability. The main objective of this experimental study is to develop polymer composites reinforced with waste chicken feather fillers and evaluate their physical, mechanical, and thermal characteristics. The composites were fabricated through an open mold casting process using bio epoxy (SR-33 Greenpoxy) as the matrix and chicken feather filler as a reinforcement in three distinct weight fractions (2.5, 5, and 7.5 wt%). To evaluate the effects of filler content on the mechanical properties of the fabricated bio-epoxy composites, they were subjected to tensile, flexural, impact, and hardness tests. The findings from the experimental studies demonstrated that the composites containing 2.5 wt% of chicken feather filler had improved mechanical properties, thermal stability, and crystallization behaviour. The thermal attributes of samples included a greater melting point, lower recrystallization temperature, higher glass transition temperature, and quicker crystallization rates. The Scanning Electron Microscope analysis of the fracture surface morphology of the biocomposites showed a better interfacial adhesion between the filler and matrix. It could be concluded from the results that the waste chicken feather can be used as potential filler reinforcements for begetting natural composites for various low- and medium-density structural and non-structural applications.