Thermodynamic Investigation of Increased Luminescence in Indium Phosphide Quantum Dots by Treatment with Metal Halide Salts.

Increasing the quantum yields of InP quantum dots is important for their applications, particularly for use in consumer displays. While several methods exist to improve quantum yield, the addition of inorganic metal halide salts has proven promising. To further investigate this phenomenon, InP quantum dots dispersed in tetrahydrofuran were titrated with ZnCl2, ZnBr2, and InCl3. The optical properties were observed, and the reactions were studied by using quantitative 1H NMR and thermodynamic measurements from isothermal titration calorimetry. These measurements contradict the previously hypothesized reaction mechanism in which metal halide salts, acting as Z-type ligands, passivate undercoordinated anions on the surface of the quantum dots. This work provides evidence for a newly proposed mechanism wherein the metal halide salts undergo a ligand exchange with indium myristate. Thermodynamic measurements prove key to supporting this new mechanism, particularly in describing the organic ligand interactions on the surface. An Ising model was used to simulate the quantum dot surface and was fit by using thermodynamic and 1H NMR data. Together, these data and the proposed exchange mechanism provide greater insight into the surface chemistry of quantum dots.

Redefining near-unity luminescence in quantum dots with photothermal threshold quantum yield.

A variety of optical applications rely on the absorption and reemission of light. The quantum yield of this process often plays an essential role. When the quantum yield deviates from unity by significantly less than 1%, applications such as luminescent concentrators and optical refrigerators become possible. To evaluate such high performance, we develop a measurement technique for luminescence efficiency with sufficient accuracy below one part per thousand. Photothermal threshold quantum yield is based on the quantization of light to minimize overall measurement uncertainty. This technique is used to guide a procedure capable of making ensembles of near-unity emitting cadmium selenide/cadmium sulfide (CdSe/CdS) core-shell quantum dots. We obtain a photothermal threshold quantum yield luminescence efficiency of 99.6 ± 0.2%, indicating nearly complete suppression of nonradiative decay channels.

Broadband Sensitization of Lanthanide Emission with Indium Phosphide Quantum Dots for Visible to Near-Infrared Downshifting.

Semiconductor quantum dot (QD)-sensitized lanthanide ions hold great promise in producing a broadly absorbing and sharply emitting luminophore, but their synthesis has proven to be difficult. We report the first synthesis of core/shell/shell InP/Ln xY1- xF3/ShF3 (Ln = Yb, Nd; Sh = Lu, Y) nanocrystals that exhibit a broad visible absorption coupled to a sharp near-infrared emission. Additionally, this is the first report of Nd being coupled to a QD absorber. We characterize the system with a variety of electron microscopy and X-ray techniques that prove this unique structure. Optical measurements confirm the correlation of the Ln3+ emission to the QD absorption, while the presence of a trap-state emission gives a clue as to the mechanism of energy transfer between the dot and the lanthanide.

The Making and Breaking of Lead-Free Double Perovskite Nanocrystals of Cesium Silver-Bismuth Halide Compositions.

Replacing lead in halide perovskites is of great interest due to concerns about stability and toxicity. Recently, lead free double perovskites in which the unit cell is doubled and two divalent lead cations are substituted by a combination of mono- and trivalent cations have been synthesized as bulk single crystals and as thin films. Here, we study stability and optical properties of all-inorganic cesium silver(I) bismuth(III) chloride and bromide nanocrystals with the double perovskite crystal structure. The cube-shaped nanocrystals are monodisperse in size with typical side lengths of 8 to 15 nm. The absorption spectrum of the nanocrystals presents a sharp peak, which we assign to a direct bismuth s-p transition and not to a quantum confined excitonic transition. Using this spectroscopic handle combined with high-resolution transmission electron microscopy (TEM) based elemental analysis, we conduct stoichiometric studies at the single nanocrystal level as well as decomposition assays in solution and observe that Ag+ diffusion and coalescence is one of the pathways by which this material degrades. Drying the nanocrystals leads to self-assembly into ordered nanocrystal solids, and these exhibit less degradation than nanocrystals in solution. Our results demonstrate that Cs2AgBiX6 (X = Cl, Br) nanocrystals are a useful model system to study structure-function relationships in the search for stable nontoxic halide perovskites.

Controlled Isotropic and Anisotropic Shell Growth in ß-NaLnF4 Nanocrystals Induced by Precursor Injection Rate.

Precise morphology and composition control is vital for designing multifunctional lanthanide-doped core/shell nanocrystals. Herein, we report controlled isotropic and anisotropic shell growth techniques in hexagonal sodium rare-earth tetrafluoride (ß-NaLnF4) nanocrystals by exploiting the kinetics of the shell growth. A drastic change of the shell morphology was observed by changing the injection rate of the shell precursors while keeping all other reaction conditions constant. We obtained isotropic shell growth for fast sequential injection and a preferred growth of the shell layers along the crystal's c-axis [001] for slow dropwise injection. Using this slow shell growth technique, we have grown rod-like shells around different almost spherical core nanocrystals. Bright and efficient upconversion was measured for both isotropic and rod-like shells around ß-NaYF4 nanocrystals doped with Yb3+/Er3+ and Yb3+/Tm3+. Photoluminescence upconversion quantum yield and lifetime measurements reveal the high quality of the core/shell nanocrystal. Furthermore, multishell rod-like nanostructures have been prepared with optically active cores and tips separated by an inert intermediate shell layer. The controlled anisotropic shell growth allows the design of new core/multishell nanostructures and enables independent investigations of the chemistry and physics of different nanocrystal facets.

Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment.

We demonstrate postsynthetic modification of CsPbBr3 nanocrystals by a thiocyanate salt treatment. This treatment improves the quantum yield of both freshly synthesized (PLQY ≈ 90%) and aged nanocrystals (PLQY ≈ 70%) to within measurement error (2-3%) of unity, while simultaneously maintaining the shape, size, and colloidal stability. Additionally, the luminescence decay kinetics transform from multiexponential decays typical of nanocrystalline semiconductors with a distribution of trap sites, to a monoexponential decay, typical of single energy level emitters. Thiocyanate only needs to access a limited number of CsPbBr3 nanocrystal surface sites, likely representing under-coordinated lead atoms on the surface, in order to have this effect.

Characterizing Photon Reabsorption in Quantum Dot-Polymer Composites for Use as Displacement Sensors.

The reabsorption of photoluminescence within a medium, an effect known as the inner filter effect (IFE), has been well studied in solutions, but has garnered less attention in regards to solid-state nanocomposites. Photoluminescence from a quantum dot (QD) can selectively excite larger QDs around it resulting in a net red-shift in the reemitted photon. In CdSe/CdS core/shell QD-polymer nanocomposites, we observe a large spectral red-shift of over a third of the line width of the photoluminescence of the nanocomposites over a distance of 100 µm resulting from the IFE. Unlike fluorescent dyes, which do not show a large IFE red-shift, QDs have a component of inhomogeneous broadening that originates from their size distribution and quantum confinement. By controlling the photoluminescence broadening as well as the sample dispersion and concentration, we show that the magnitude of the IFE within the nanocomposite can be tuned. We further demonstrate that this shift can be exploited in order to spectroscopically monitor the vertical displacement of a nanocomposite in a fluorescence microscope. Large energetic shifts in the measured emission with displacement can be maximized, resulting in a displacement sensor with submicrometer resolution. We further show that the composite can be easily attached to biological samples and is able to measure deformations with high temporal and spatial precision.

Precise Tuning of Surface Quenching for Luminescence Enhancement in Core-Shell Lanthanide-Doped Nanocrystals.

Lanthanide-doped nanocrystals are of particular interest for the research community not only due to their ability to shape light by downshifting, quantum cutting, and upconversion but also because novel optical properties can be found by the precise engineering of core-shell nanocrystals. Because of the large surface area-to-volume ratio of nanocrystals, the luminescence is typically suppressed by surface quenching. Here, we demonstrate a mechanism that exploits surface quenching processes to improve the luminescence of our core-shell lanthanide-doped nanocrystals. By carefully tuning the shell thickness of inert ß-NaLuF4 around ß-NaYF4 nanocrystals doped with Yb3+ and Er3+, we unravel the relationship between quantum yield and shell thickness, and quantify surface quenching rates for the relevant Er3+ and Yb3+ energy levels. This enhanced understanding of the system's dynamics allowed us to design nanocrystals with a surface quenching-assisted mechanism for bright NIR to NIR downshifting with a distinctive efficiency peak for an optimized shell thickness.