Fast and sensitive detection of Bacillus anthracis spores by immunoassay.

Bacillus anthracis is one of the most dangerous potential biological weapons, and it is essential to develop a rapid and simple method to detect B. anthracis spores in environmental samples. The immunoassay is a rapid and easy-to-use method for the detection of B. anthracis by means of antibodies directed against surface spore antigens. With this objective in view, we have produced a panel of monoclonal antibodies against B. anthracis and developed colorimetric and electrochemiluminescence (ECL) immunoassays. Using Meso Scale Discovery ECL technology, which is based on electrochemiluminescence (ECL) detection utilizing a sulfo-Tag label that emits light upon electrochemical stimulation (using a dedicated ECL plate reader, an electrical current is placed across the microplate with electrodes integrated into the bottom of the plate, resulting in a series of electrically induced reactions leading to a luminescent signal), a detection limit ranging between 0.3 × 10(3) and 10(3) CFU/ml (i.e., 30 to 100 spores per test), depending on the B. anthracis strain assayed, was achieved. In complex matrices (5 mg/ml of soil or simulated powder), the detection level (without any sample purification or concentration) was never altered more than 3-fold compared with the results obtained in phosphate-buffered saline.

Extended and global phylogenetic view of the Bacillus cereus group population by combination of MLST, AFLP, and MLEE genotyping data.

The Bacillus cereus group of bacteria includes species that can cause food-poisoning or spoilage, such as B. cereus, as well as Bacillus anthracis, the cause of anthrax. In the present report we have conducted a multi-datatype analysis using tools from the HyperCAT database (http://mlstoslo.uio.no/) that we recently developed, combining data from multilocus sequence typing (Tourasse et al., 2010), amplified fragment length polymorphism, and multilocus enzyme electrophoresis typing techniques. We provide a comprehensive snapshot of the B. cereus group population, incorporating 2213 isolates including 450 from food and dairy products, in the form of both phylogenetic supertrees and superclusters of genetically closely related isolates. Our main findings include the detection of phylogenetically separated groups of isolates possibly representing novel evolutionary lineages within the B. cereus group, a putative new branch of B. anthracis, as well as new groups of related strains containing both environmental and clinical isolates. In addition, the multi-datatype analysis revealed to a larger extent than previously recognized that food-borne isolates can share identical genotyping profiles with strains from various other origins. Altogether, the global analysis confirms and extends the results underlining the opportunistic nature of B. cereus group organisms, and the fact that isolates responsible for disease outbreaks and contamination of foodstuffs can originate from various genetic backgrounds.

Carbohydrate metabolism differences between subgroup A1 and B2 strains of Bacillus anthracis as assessed by comparative genomics and functional genetics.

In France, Bacillus anthracis subgroup B2 strains do not metabolize starch or glycogen but can use gluconate, whereas subgroup A1 strains show the inverse pattern. Functional genetic analysis revealed that mutations in the amyS and gntK genes encoding an alpha-amylase and a gluconate kinase, respectively, were responsible for these phenotypes.

Spatial localization of bacteria controls coagulation of human blood by 'quorum acting'.

Blood coagulation often accompanies bacterial infections and sepsis and is generally accepted as a consequence of immune responses. Though many bacterial species can directly activate individual coagulation factors, they have not been shown to directly initiate the coagulation cascade that precedes clot formation. Here we demonstrated, using microfluidics and surface patterning, that the spatial localization of bacteria substantially affects coagulation of human and mouse blood and plasma. Bacillus cereus and Bacillus anthracis, the anthrax-causing pathogen, directly initiated coagulation of blood in minutes when bacterial cells were clustered. Coagulation of human blood by B. anthracis required secreted zinc metalloprotease InhA1, which activated prothrombin and factor X directly (not via factor XII or tissue factor pathways). We refer to this mechanism as 'quorum acting' to distinguish it from quorum sensing--it does not require a change in gene expression, it can be rapid and it can be independent of bacterium-to-bacterium communication.

Structure of the exosporium and sublayers of spores of the Bacillus cereus family revealed by electron crystallography.

We report on the first step in mapping out the spatial location of structural proteins within the exosporium, namely a description of its three-dimensional architecture. Using electron microscopy and image analysis, we have characterized crystalline fragments from the exosporium of Bacillus cereus, B. thuringiensis and B. anthracis strains and identified up to three distinct crystal types. Type I and type II crystals were examined in three dimensions and shown to form arrays of interlinked crown-like structures each enclosing a cavity approximately 26-34 A deep with threefold symmetry. The arrays appear to be permeated by tunnels allowing access from one surface to the other, possibly indicating that the exosporium forms a semi-permeable barrier. The pore size of approximately 23-34 A would allow passage of the endospore germinants, alanine or inosine but not degradative enzymes or antibodies. Thus the structures appear compatible with a protective role for the exosporium. Furthermore the outermost crystalline layer must act as a scaffold for binding the BclA protein that contributes to the 'hairy nap' layer. The array of crowns may also act as a matrix for the binding or adsorption of other proteins that have been identified in the exosporium such as GroEL, immune inhibitor A and arginase.

ExsY and CotY are required for the correct assembly of the exosporium and spore coat of Bacillus cereus.

The exosporium-defective phenotype of a transposon insertion mutant of Bacillus cereus implicated ExsY, a homologue of B. subtilis cysteine-rich spore coat proteins CotY and CotZ, in assembly of an intact exosporium. Single and double mutants of B. cereus lacking ExsY and its paralogue, CotY, were constructed. The exsY mutant spores are not surrounded by an intact exosporium, though they often carry attached exosporium fragments. In contrast, the cotY mutant spores have an intact exosporium, although its overall shape is altered. The single mutants show altered, but different, spore coat properties. The exsY mutant spore coat is permeable to lysozyme, whereas the cotY mutant spores are less resistant to several organic solvents than is the case for the wild type. The exsY cotY double-mutant spores lack exosporium and have very thin coats that are permeable to lysozyme and are sensitive to chloroform, toluene, and phenol. These spore coat as well as exosporium defects suggest that ExsY and CotY are important to correct formation of both the exosporium and the spore coat in B. cereus. Both ExsY and CotY proteins were detected in Western blots of purified wild-type exosporium, in complexes of high molecular weight, and as monomers. Both exsY and cotY genes are expressed at late stages of sporulation.

Contribution of ExsFA and ExsFB proteins to the localization of BclA on the spore surface and to the stability of the bacillus anthracis exosporium.

Spores of Bacillus anthracis, the etiological agent of anthrax, and the closely related species Bacillus cereus and Bacillus thuringiensis, possess an exosporium, which is the outermost structure surrounding the mature spore. It consists of a paracrystalline basal layer and a hair-like outer layer. To date, the structural contribution of only one exosporium component, the collagen-like glycoprotein BclA, has been described. It is the structural component of the hair-like filaments. Here, we describe two other proteins, ExsFA and ExsFB, which are probably organized in multimeric complexes with other exosporium components, including BclA. Single and double exsF deletion mutants were constructed and analyzed. We found that inactivation of exsF genes affects the BclA content of spores. BclA is produced by all mutants. However, it is partially and totally released after mother cell lysis of the DeltaexsFA and DeltaexsFA DeltaexsFB mutant strains, respectively. Electron microscopy revealed that the exsF mutant spores have defective exosporia. The DeltaexsFA and DeltaexsFA DeltaexsFB spore surfaces are partially and totally devoid of filaments, respectively. Moreover, for all mutants, the crystalline basal layer appeared unstable. This instability revealed the presence of two distinct crystalline arrays that are sloughed off from the spore surface. These results indicate that ExsF proteins are required for the proper localization of BclA on the spore surface and for the stability of the exosporium crystalline layers.

Polymorphism in the collagen-like region of the Bacillus anthracis BclA protein leads to variation in exosporium filament length.

We recently identified a Bacillus anthracis glycoprotein which is a structural constituent of the exosporium filaments (P. Sylvestre, E. Couture-Tosi, and M. Mock, Mol. Microbiol. 45:169-178, 2002). This Bacillus collagen-like protein (BclA) contains an internal collagen-like region (CLR) of GXX repeats which includes a large proportion of GPT triplets. Here, we report that the polymorphic marker Ceb-Bams13, for which there are nine alleles (P. Le Flèche et al., BMC Microbiol. 1:2, 2001), maps within the open reading frame encoding BclA. The bclA gene in 11 B. anthracis strains representative of seven Ceb-Bams13 alleles was sequenced and compared to the Ames bclA gene sequence. The amino- and carboxy-terminal sequences surrounding the CLR are conserved. The CLR itself is highly polymorphic: it contains between 17 and 91 GXX repeats and one to eight copies of the 21-amino-acid sequence (GPT)(5)GDTGTT, named the BclA repeat. The length of the filament on the spore surface differed between the strains. We exchanged the bclA gene between strains with different CLRs and examined the spore surfaces by electron microscopy analysis. The length of the BclA CLR is responsible for the variation in filament length.

A collagen-like surface glycoprotein is a structural component of the Bacillus anthracis exosporium.

Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The exosporium is the outermost integument surrounding the mature spore. Here, we describe the purification and the characterization of an immunodominant protein of the spore surface. This protein was abundant, glycosylated and part of the exosporium. The amino-terminal sequence was determined and the corresponding gene was identified. It encodes a protein of 382 amino acid residues, the central part of which contains a region of GXX motifs presenting similarity to mammalian collagen proteins. Thus, this collagen-like surface protein was named BclA (for Bacillus collagen-like protein of anthracis). BclA was absent from vegetative cells; it was detected only in spores and sporulating cells. A potential promoter, dependent on the sigma factor sigma(K), which is required for a variety of events late in sporulation, was found upstream from the bclA gene. A bclA deletion mutant was constructed and analysed. Electron microscopy studies showed that BclA is a structural component of the filaments covering the outer layer of the exosporium.