The Optimization of the One-Pot Synthesis of Au@SiO2Core-Shell Nanostructures: Modification with Dansyl Group and Their Fluorescent Properties.

This work describes the optimization of the one-pot synthesis of fine core-shell nanostructures based on nanogold (Au NPs) and silica (SiO2). The obtained core-shell nanomaterials were characterized by Transmission Electron Microscopy (TEM and by the method of spectroscopes such as UV-Vis Spectroscopy and Fourier Transform Infrared Spectroscopy (FT-IR). In addition, the measurement of the zeta potential and size of the obtained particles helped present a full characterization of Au@SiO2 nanostructures. The results show that the influence of reagents acting as reducers, stabilizers, or precursors of the silica shell affects the morphology of the obtained material. By controlling the effect of the added silica precursor, the thickness of the shell can be manipulated, the reducer has an effect on the shape and variety, and then the stabilizer affects their agglomeration. This work provides also a new approach for Au@SiO2core-shell nanostructure preparation by further modification with dansyl chloride (DNS-Cl). The results show that, by tuning the silica shell thickness, the intensity of the fluorescence spectrum of Au@SiO2-(CH2)3-NH-DNS nanocomposite is about 12 times higher than that of DNS-Cl.

New Core-Shell Nanostructures for FRET Studies: Synthesis, Characterization, and Quantitative Analysis.

This work describes the synthesis and characterization of new core-shell material designed for Förster resonance energy transfer (FRET) studies. Synthesis, structural and optical properties of core-shell nanostructures with a large number of two kinds of fluorophores bound to the shell are presented. As fluorophores, strongly fluorescent rhodamine 101 and rhodamine 110 chloride were selected. The dyes exhibit significant spectral overlap between acceptor absorption and donor emission spectra, which enables effective FRET. Core-shell nanoparticles strongly differing in the ratio of donors to acceptor numbers were prepared. This leads to two different interesting cases: typical single-step FRET or multistep energy migration preceding FRET. The single-step FRET model that was designed and presented by some of us recently for core-shell nanoparticles is herein experimentally verified. Very good agreement between the analytical expression for donor fluorescence intensity decay and experimental data was obtained, which confirmed the correctness of the model. Multistep energy migration between donors preceding the final transfer to the acceptor can also be successfully described. In this case, however, experimental data are compared with the results of Monte Carlo simulations, as there is no respective analytical expression. Excellent agreement in this more general case evidences the usefulness of this numerical method in the design and prediction of the properties of the synthesized core-shell nanoparticles labelled with multiple and chemically different fluorophores.

Plasmon-enhanced photoluminescence from TiO2 and TeO2 thin films doped by Eu3+ for optoelectronic applications.

In this work we study the luminescence properties of europium-doped titanium dioxide and tellurium oxide thin films enhanced by gold plasmonic nanostructures. We propose a new type of plasmon structure with an ultrathin dielectric film between plasmonic platform and luminescent material. Plasmonic platforms were manufactured through thermal annealing of the gold thin film. Thermal dewetting of gold film results in spherical gold nanostructures with average dimensions of 50 nm. Both, luminescent TiO2:Eu and TeO2:Eu films were deposited by RF magnetron sputtering from mosaic targets. The morphology of the gold nanostructures was investigated by SEM and TEM, while the composition of oxides film was analyzed by XPS. Luminescence properties were studied on the basis of excitation and emission spectra. The experiments show that the additional dielectric layer enhances the luminescence intensity. Such structures could be potential candidates as phosphors in white LEDs.

From Structure to Luminescent Properties of B2O3-Bi2O3-SrF2 Glass and Glass-Ceramics Doped with Eu3+ Ions.

Glass-ceramics with the composition B2O3-Bi2O3-SrF2 were synthesized by the conventional melt-quenching technique and subsequent crystallization of the parental glasses. The temperature at which the ceramization was carried out was selected based on differential scanning calorimetry (DSC) analysis. The structure of the studied materials and the formation of SrF2 nanocrystals were confirmed by the Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. It was found that the amount of strontium fluoride introduced into the parental borate-bismuth glass has a significant impact on the growth of SrF2 nanocrystals. In particular, the influence of the crystalline SrF2 phase on luminescence intensity and kinetics was studied using Eu2O3-doped samples. An increase in luminescence intensity was observed in the samples in which SrF2 nanocrystals were formed. This is most likely related to the fact that some of the Eu3+ ions were (after annealing of the glass) located in the crystalline structure of strontium fluoride. This was confirmed both by the luminescence lifetime obtained based on the luminescence decay curves and the calculated Judd-Ofelt parameters, Ω2 and Ω4. The results achieved confirm that the glasses and glass-ceramics described in this work could be considered as a new phosphor for light-emitting diodes (LEDs).

Dansyl-Labelled Ag@SiO2 Core-Shell Nanostructures-Synthesis, Characterization, and Metal-Enhanced Fluorescence.

The present work describes synthesis, characterization, and use of a new dansyl-labelled Ag@SiO2 nanocomposite as an element of a new plasmonic platform to enhance the fluorescence intensity. Keeping in mind that typical surface plasmon resonance (SPR) characteristics of silver nanoparticles coincide well enough with the absorption of dansyl molecules, we used them to build the core of the nanocomposite. Moreover, we utilized 10 nm amino-functionalized silica shell as a separator between silver nanoparticles and the dansyl dye to prevent the dye-to-metal energy transfer. The dansyl group was incorporated into Ag@SiO2 core-shell nanostructures by the reaction of aminopropyltrimethoxysilane with dansyl chloride and we characterized the new dansyl-labelled Ag@SiO2 nanocomposite using transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Additionally, water wettability measurements (WWM) were carried out to assess the hydrophobicity and hydrophilicity of the studied surface. We found that the nanocomposite deposited on a semitransparent silver mirror strongly increased the fluorescence intensity of dansyl dye (about 87-fold) compared with the control sample on the glass, proving that the system is a perfect candidate for a sensitive plasmonic platform.

The Luminescence of 1,8-Diazafluoren-9-One/Titanium Dioxide Composite Thin Films for Optical Application.

The investigation of innovative label-free α-amino acids detection methods represents a crucial step for the early diagnosis of several diseases. While 1,8-diazafluoren-9-one (DFO) is known in forensic application because of the fluorescent products by reacting with the amino acids present in the papillary exudate, its application for diagnostic purposes has not been fully investigated. The stabilization of DFO over a transparent substrate allows its complexation with biomolecules for the detection of α-amino acids. In this study, DFO was immobilized into a titanium dioxide (TiO2) matrix for the fluorescence detection of glycine, as a target α-amino acid (a potential marker of the urogenital tract cancers). The DFO/TiO2 composite was characterized by atomic force microscopy, spectroscopic ellipsometry, fluorescence spectroscopy and fluorescence microscopy. The performed fluorescent studies indicate spectacular formation of aggregates at higher concentration. The measurements performed using various fluorescence and microscopic techniques together with the suitable analysis show that the aggregates are able to emit short-lived fluorescence.

Influence of chlorine atoms in bay positions of perylene-tetracarboxylic acids on their spectral properties in Langmuir-Blodgett films.

The influence of chlorine atoms in the bay positions of the perylene-3,4,9,10-tetracarboxylic acids with the different alkyl chains length on their spectral properties in monomolecular films has been studied. The chlorinated (PCln) and for comparison non-chlorinated (Pn) perylene derivatives were deposited onto quartz plates using a Langmuir-Blodgett (LB) technique. The absorption spectra showed that the PCln and Pn dyes form in monolayers the I- and J-type aggregates, respectively. In turn, their steady-state and time-resolved emission spectra revealed presence of two emitter types, which we assigned to monomers and excimers. The luminescence lifetimes of the PCln monomers and excimers determined with a time-correlated single photon counting method (TCSPC) are significantly shorter than these obtained for the same emitter types in the Pn monolayers. In the case of the chlorinated dyes, the contribution of the monomer emission dominates over the excimer emission and is almost independent from the alkyl chain length. By contrast, the share of the Pn monomer emission increases strongly with a number of carbon atoms in their hydrocarbon chains. The luminescence quantum yields (LQY) of the Pn and PCln monolayers measured in an integrating sphere are in the range of 0.06-0.11. The presented results reveal that the PCln dyes exhibit lower tendency for aggregation than the non-chlorinated derivatives. It can be explained by limited intermolecular interaction between neighbouring PCln molecules caused by deformation of the perylene core as a result of strongly electronegative chlorine atoms in the bay positions of these dyes. Moreover, the strong influence of the alkyl chain length on the Pn aggregation contrary to the case of the PCln derivatives was observed.

Time-resolved emission spectra of 4-dimethylamino-4'-cyano-stilbene and resveratrol in high viscosity solvents and silica matrices.

Time-resolved emission spectra of 4-dimethylamino-4'-cyano-stilbene (DMACS) and 3,5,4'-trihydroxy-stilbene (resveratrol, RSV) in propylene glycol and in rigid silica xerogel matrix at 23°C were studied. For the polar molecule DMACS in propylene glycol, a 66nm shift of maximum wavelength of emission spectra was observed within 1ns after excitation, and most of the shift occurred during the first 200ps. For resveratrol in propylene glycol no such a shift was observed. The rigid silica environment eliminates some deactivation pathways and stabilizes spectroscopic properties of both molecules. Spectral properties of nonpolar and high dipole moment molecules in viscous liquids and rigid environments are compared. Results are explained on the basis of intramolecular processes and solute-solvent relaxation, as well.

Long-distance FRET analysis: a Monte Carlo simulation study.

A new method for extending the utilizable range of Förster resonance energy transfer (FRET) is proposed and tested by the Monte Carlo technique. The obtained results indicate that the efficiency of FRET can be significantly enhanced at a given distance if the energy transfer takes place toward multiple acceptors that are closely located on a macromolecule instead of a single acceptor molecule as it is currently used in FRET analysis. On the other hand, reasonable FRET efficiency can be obtained at significantly longer distances than in the case of a single acceptor. Randomly distributed and parallel orientated acceptor transition moments with respect to the transition moment of the donor molecule have been analyzed as two extreme cases. As expected, a parallel orientation of donor and acceptor transition moments results in a more efficient excitation energy transfer. This finding could be used to directly reveal the assembly/deassembly of large protein complexes in a cell by fluorescence microscopy.

Femtosecond dynamics of a porphyrin derivative confined by the human serum albumin protein.

The relaxation dynamics of 5,10,15,20-tetrakis(4-hydroxyphenyl)-porphyrin (p-THPP) in tetrahydrofuran (THF) and encapsulated within the human serum albumin (HSA) protein in water solution was investigated. The protein environment affects the B→Q(y) and Q(x)→Q(y) transition dynamics (from 80 and 140-200 fs in THF to 50 and 100 fs in HSA, respectively) as well as the lifetime of the relaxed Q(x) state (9.1 vs 9.9 ns). The most prominent differences are observed in the relaxation dynamics in the hot Q(x) state in HSA, which includes the energy transfer to the protein in ∼1 ps and much slower solvent-assisted thermal equilibration component of about 20-30 ps.

Electronic excitation energy migration in partly ordered polymeric films.

Multistep intermolecular energy migration between elongated fluorophores (carbocyanines) in uniaxially oriented polymer films is studied based on fluorescence depolarization and Monte-Carlo simulations. Contrary to disordered systems it is found experimentally that the concentration depolarization of fluorescence in uniaxially oriented films is extremely weak despite effective energy migration. Based on the concentration depolarization experiment in the ordered matrix it is possible to estimate the angle between absorption and fluorescence transition moments of carbocyanines. The values of that angle are very close to those obtained from other methods.