Hybrid Bonding Bottlebrush Polymers Grafted from a Supramolecular Polymer Backbone.

Bottlebrush polymers, macromolecules consisting of dense polymer side chains grafted from a central polymer backbone, have unique properties resulting from this well-defined molecular architecture. With the advent of controlled radical polymerization techniques, access to these architectures has become more readily available. However, synthetic challenges remain, including the need for intermediate purification, the use of toxic solvents, and challenges with achieving long bottlebrush architectures due to backbone entanglements. Herein, we report hybrid bonding bottlebrush polymers (systems integrating covalent and noncovalent bonding of structural units) consisting of poly(sodium 4-styrenesulfonate) (p(NaSS)) brushes grafted from a peptide amphiphile (PA) supramolecular polymer backbone. This was achieved using photoinitiated electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization in water. The structure of the hybrid bonding bottlebrush architecture was characterized using cryogenic transmission electron microscopy, and its properties were probed using rheological measurements. We observed that hybrid bonding bottlebrush polymers were able to organize into block architectures containing domains with high brush grafting density and others with no observable brushes. This finding is possibly a result of dynamic behavior unique to supramolecular polymer backbones, enabling molecular exchange or translational diffusion of monomers along the length of the assemblies. The hybrid bottlebrush polymers exhibited higher solution viscosity at moderate shear, protected supramolecular polymer backbones from disassembly at high shear, and supported self-healing capabilities, depending on grafting densities. Our results demonstrate an opportunity for novel properties in easily synthesized bottlebrush polymer architectures built with supramolecular polymers that might be useful in biomedical applications or for aqueous lubrication.

Microscopy and modelling investigations on the morphology of the biofilm exopolysaccharide produced by Burkholderia multivorans strain C1576.

Bacteria form very often biofilms where they embed in a self-synthesized matrix exhibiting a gel-like appearance. Matrices offer several advantages, including defence against external threats and the easiness of intercellular communication. In infections, biofilm formation enhances bacteria resistance against antimicrobials, causing serious clinical problems for patients' treatments. Biofilm matrices are composed of proteins, extracellular DNA, and polysaccharides, the latter being the major responsible for matrix architecture. The repeating unit of the biofilm polysaccharide synthesized by Burkholderia multivorans strain C1576 contains two mannoses and two sequentially linked rhamnoses, one of them 50 % methylated on C-3. Rhamnose, a 6-deoxysugar, has lower polarity than other common monosaccharides and its methylation further reduces polarity. This suggests a possible role of this polysaccharide in the biofilm matrix; in fact, computer modelling and atomic force microscopy studies evidenced intra- and inter-molecular non-polar interactions both within polysaccharides and with aliphatic molecules. In this paper, the polysaccharide three-dimensional morphology was investigated using atomic force microscopy in both solid and solution states. Independent evidence of the polymer conformation was obtained by transmission electron microscopy which confirmed the formation of globular compact structures. Finally, data from computer dynamic simulations were used to model the three-dimensional structure.

Artificial extracellular matrix scaffolds of mobile molecules enhance maturation of human stem cell-derived neurons.

Human induced pluripotent stem cell (hiPSC) technologies offer a unique resource for modeling neurological diseases. However, iPSC models are fraught with technical limitations including abnormal aggregation and inefficient maturation of differentiated neurons. These problems are in part due to the absence of synergistic cues of the native extracellular matrix (ECM). We report on the use of three artificial ECMs based on peptide amphiphile (PA) supramolecular nanofibers. All nanofibers display the laminin-derived IKVAV signal on their surface but differ in the nature of their non-bioactive domains. We find that nanofibers with greater intensity of internal supramolecular motion have enhanced bioactivity toward hiPSC-derived motor and cortical neurons. Proteomic, biochemical, and functional assays reveal that highly mobile PA scaffolds caused enhanced ß1-integrin pathway activation, reduced aggregation, increased arborization, and matured electrophysiological activity of neurons. Our work highlights the importance of designing biomimetic ECMs to study the development, function, and dysfunction of human neurons.

Polyaromatic cores for the exfoliation of popular 2D materials.

Two-dimensional (2D) nanomaterials have attracted interest from the scientific community due to their unique properties. The production of these materials has been carried out by diverse methodologies, the liquid phase exfoliation being the most promising one due to its simplicity and potential scalability. The use of several stabilizers allows to obtain dispersions of these 2D nanomaterials in solvents with low boiling points. Herein we describe a general exfoliation method for different 2D materials employing a biphasic water/dichloromethane system and two different (poly)aromatic hydrocarbons (PAHs). This method allows us to obtain dispersions of the exfoliated 2D materials with high concentrations in the organic solvent. Due to the low boiling point of dichloromethane, and therefore its easy removal, the obtained dispersions can be employed as additives for different composites. We corroborate that the exfoliation efficiency is improved due to the π-π and van der Waals interactions between the PAHs and the layers of the 2D materials.

Modeling Interactions within and between Peptide Amphiphile Supramolecular Filaments.

Many peptides are able to self-assemble into one-dimensional (1D) nanostructures, such as cylindrical fibers or ribbons of variable widths, but the relationship between the morphology of 1D objects and their molecular structure is not well understood. Here, we use coarse-grained molecular dynamics (CG-MD) simulations to study the nanostructures formed by self-assembly of different peptide amphiphiles (PAs). The results show that ribbons are hierarchical superstructures formed by laterally assembled cylindrical fibers. Simulations starting from bilayer structures demonstrate the formation of filaments, whereas other simulations starting from filaments indicate varying degrees of interaction among them depending on chemical structure. These interactions are verified by observations using atomic force microscopy of the various systems. The interfilament interactions are predicted to be strongest in supramolecular assemblies that display hydrophilic groups on their surfaces, while those with hydrophobic ones are predicted to interact more weakly as confirmed by viscosity measurements. The simulations also suggest that peptide amphiphiles with hydrophobic termini bend to reduce their interfacial energy with water, which may explain why these systems do not collapse into superstructures of bundled filaments. The simulations suggest that future experiments will need to address mechanistic questions about the self-assembly of these systems into hierarchical structures, namely, the preformation of interactive filaments vs equilibration of large assemblies into superstructures.

Photoelectrochemical Properties of SnO2 Photoanodes Sensitized by Cationic Perylene-Di-Imide Aggregates for Aqueous HBr Splitting.

Perylene-sensitized mesoporous SnO2 films were used as electrodes for photoelectrochemical HBr splitting in aqueous solution. Upon AM 1.5 G illumination a 3-4 fold increase of the saturated photocurrent was observed when decreasing the pH of the aqueous solution from pH 3 to pH 0 (j max = 0.05 ± 0.01 mAcm-2 at pH 3 and 0.17 ± 0.02 mAcm-2 at pH 0, respectively). A detailed spectroscopic and electrochemical analysis of the hybrid material was carried out in order to address the impact of interfacial energetics on charge separation dynamics. UV/Vis spectroelectrochemical measurements showed that the energy of semiconductor states in such systems can be adjusted independently from the molecular levels by varying proton concentration. Photoelectrochemical measurements and ns-µs transient absorption spectroscopy reveal that pH-related changes of the interfacial energetics have only a minor impact on the charge injection rate. An increase of the proton concentration improves charge collection mainly by retarding recombination, which in the case of Br- oxidation is in critical competition with perylene regeneration. Control of the back recombination appears to be a key feature in heterogeneous molecular systems tasked to drive energetically demanding redox reactions.

Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea.

Due to their low cost and possible green synthesis, high stability and resistance to photobleaching, graphene quantum dots (GQDs) can be considered as one of the class of carbon nanomaterials which may have great potential as an agent for photosensitized oxygen activation. In such a way, GQDs can be used as a theranostic agent in photodynamic therapy. In this work pristine GQDs, GQDs irradiated with gamma rays and GQDs doped with N and N, S atoms are produced using a simple, green approach. By using different techniques (AFM, HR-TEM, SEM-EDS, FTIR, XRD, PL and UV-Vis) we investigated structural and optical properties of the new types of GQDs. We showed that GQDs functionalized with thiourea (GQDs-TU) completely lost the ability to produce singlet oxygen (1O2) upon photoexcitation while functionalization with urea (GQDs-U) improves the capability of GQDs to produce 1O2 upon the same conditions. Thus, presented GQDs modification with urea seems like a promising approach for the production of the efficient photosensitizer. On the opposite, GQDs-TU are efficient OH quencher. Due to high singlet oxygen production and low cytotoxicity below 100 µg/mL against HeLa cells, GQDs-U is a good candidate as an agent in photodynamic therapy at this concentration.

Supramolecular Chiral Discrimination of D-Phenylalanine Amino Acid Based on a Perylene Bisimide Derivative.

The interaction between homochiral substituted perylene bisimide (PBI) molecule and the D enantiomer of phenylalanine amino acid was monitored. Spectroscopic transitions of PBI derivative in aqueous solution in the visible range were used to evaluate the presence of D-phenylalanine. UV-visible, fluorescence, FT-IR, and AFM characterizations showed that D-phenylalanine induces significant variations in the chiral perylene derivative aggregation state and the mechanism is enantioselective as a consequence of the 3D analyte structure. The interaction mechanism was further investigated in presence of interfering amino acid (D-serine and D-histidine) confirming that both chemical structure and its 3D structure play a crucial role for the amino acid discrimination. A D-phenylalanine fluorescence sensor based on perylene was proposed. A limit of detection (LOD) of 64.2 ± 0.38 nM was calculated in the range 10-7-10-5 M and of 1.53 ± 0.89 µM was obtained in the range 10-5 and 10-3 M.

Concise, Single-Step Synthesis of Sulfur-Enriched Graphene: Immobilization of Molecular Clusters and Battery Applications.

The concise synthesis of sulfur-enriched graphene for battery applications is reported. The direct treatment of graphene oxide (GO) with the commercially available Lawesson's reagent produced sulfur-enriched-reduced GO (S-rGO). Various techniques, such as X-ray photoelectron spectroscopy (XPS), confirmed the occurrence of both sulfur functionalization and GO reduction. Also fabricated was a nanohybrid material by using S-rGO with polyoxometalate (POM) as a cathode-active material for a rechargeable battery. Transmission electron microscopy (TEM) revealed that POM clusters were individually immobilized on the S-rGO surface. This battery, based on a POM/S-rGO complex, exhibited greater cycling stability for the charge-discharge process than a battery with nanohybrid materials positioned between the POM and nonenriched rGO. These results demonstrate that the use of sulfur-containing groups on a graphene surface can be extended to applications such as the catalysis of electrochemical reactions and electrodes in other battery systems.

Photocatalytically Active Graphitic Carbon Nitride as an Effective and Safe 2D Material for In Vitro and In Vivo Photodynamic Therapy.

Thanks to its photocatalytic property, graphitic carbon nitride (g-C3 N4 ) is a promising candidate in various applications including nanomedicine. However, studies focusing on the suitability of g-C3 N4 for cancer therapy are very limited and possible underlying molecular mechanisms are unknown. Here, it is demonstrated that photoexcitation of g-C3 N4 can be used effectively in photodynamic therapy, without using any other carrier or additional photosensitizer. Upon light exposure, g-C3 N4 treatment kills cancer cells, without the need of any other nanosystem or chemotherapeutic drug. The material is efficiently taken up by tumor cells in vitro. The transcriptome and proteome of g-C3 N4 and light treated cells show activation in pathways related to both oxidative stress, cell death, and apoptosis which strongly suggests that only when combined with light exposure, g-C3 N4 is able to kill cancer cells. Systemic administration of the mesoporous form results in elimination from urinary bladder without any systemic toxicity. Administration of the material significantly decreases tumor volume when combined with local light treatment. This study paves the way for the future use of not only g-C3 N4 but also other 2D nanomaterials in cancer therapy.

Amino Acid-functionalized hollow mesoporous silica nanospheres as efficient biocompatible drug carriers for anticancer applications.

Herein, a series of new amino acid-functionalized hollow mesoporous silica nanospheres (HMSNs) by post-grafting methods were prepared. These new materials were characterized by different techniques and were studied as matrices for the antineoplastic drug (cisplatin) transport and delivery. The results demonstrate that the surface functionalization of the carriers has a remarkable positive influence on the loading efficiency and release rate of cisplatin. The highest drug entrapment efficiency and the most optimal release properties were observed when the (2-(butylamino) ethyl) glycine groups are grafted on the HMSNs surface (AFS-2-HMSNs sample). Moreover, the in vitro cytotoxic effect of both empty and cisplatin-loaded AFS-2-HMSNs sample (CDDP@AFS-2-HMSNs) on MCF-7 cells (human breast adenocarcinoma cell line) and HepG2 cells (human liver carcinoma cell line) were evaluated by MTT assay. The most important outcome is that the empty carrier revealed no cytotoxicity to cancer cells. However, CDDP@AFS-2-HMSNs caused a notable inhibition of cell viability which was affected from the dose and time. Our results demonstrate that the synthesized materials could be used as carriers for drug delivery with controlled release applications.

Singlet oxygen photo-production by perylene bisimide derivative Langmuir-Schaefer films for photodynamic therapy applications.

A perylene bisimide (PBI) derivative was utilized as photosensitizer for photodynamic therapy (PDT) applications, due to its high efficiency in singlet oxygen generation upon photoexcitation. It was immobilized onto a hydrophobized solid support, by means of the Langmuir-Schaefer (LS) technique, to achieve a preliminary medical device able to induce death of cancer cells in vitro. First, PBI derivative solutions, at two different concentrations (4.2 × 10-5 and 1.5 × 10-4 M) were chosen, based on the different PBI aggregation state, to be spread onto a water subphase in a Langmuir trough. Physico-chemical and morphological characterizations of the floating films were performed. Then the floating layers were transferred onto quartz substrates. The resulting multilayer LS films were characterized by spectroscopic measurements showing that the photochemical properties of the PBI derivative were well preserved even when immobilized. The LS film that exhibited the highest efficiency in the singlet oxygen production under light excitation was assessed in in vitro tests on human cervical carcinoma C13 cell line and the photo-toxicity was measured. This study revealed absence of cytotoxicity in dark conditions and a high photo-cytotoxicity toward cancer cells, making it a promising photoactive device.

The polysaccharide extracted from the biofilm of Burkholderia multivorans strain C1576 binds hydrophobic species and exhibits a compact 3D-structure.

Microorganisms often grow in communities called biofilms where cells are imbedded in a complex self-produced biopolymeric matrix composed mainly of polysaccharides, proteins, and DNA. This matrix, together with cell proximity, confers many advantages to these microbial communities, but also constitutes a serious concern when biofilms develop in human tissues or on implanted prostheses. Although polysaccharides are considered the main constituents of the matrices, their specific role needs to be clarified. We have investigated the chemical and morphological properties of the polysaccharide extracted from biofilms produced by the C1576 reference strain of the opportunistic pathogen Burkholderia multivorans, which causes lung infections in cystic fibrosis patients. The aim of the present study is the definition of possible interactions of the polysaccharide and the three-dimensional conformation of its chain within the biofilm matrix. Surface plasmon resonance experiments confirmed the ability of the polysaccharide to bind hydrophobic molecules, due to the presence of rhamnose dimers in its primary structure. In addition, atomic force microscopy studies evidenced an extremely compact three-dimensional structure of the polysaccharide which may form aggregates, suggesting a novel view of its structural role into the biofilm matrix.

Perylene Bisimide Aggregates as Probes for Subnanomolar Discrimination of Aromatic Biogenic Amines.

Perylene bisimide derivatives show peculiar physical chemical features, such as a highly conjugated system, high extinction coefficients and elevated fluorescence quantum yields, making them suitable for the development of optical sensors of compounds of interest. In particular, they are characterized by the tendency to aggregate into π-π stacked supramolecular structures. In this contribution, the behavior of the PBI derivative N, N'-bis(2-(trimethylammonium)ethylene)perylene bisimide dichloride was investigated both in aqueous solution and on solid support. The electronic communication between PBI aggregates and biogenic amines was exploited in order to discriminate aromatic amines down to subnanomolar concentrations by observing PBI fluorescence variations in the presence of various amines and at different concentrations. The experimental findings were corroborated by density functional theory calculations. In particular, phenylethylamine and tyramine were demonstrated to be selectively detected down to 10-10 M concentration. Then, in order to develop a surface plasmon resonance (SPR) device, PBI was deposited onto a SPR support by means of the layer-by-layer method. PBI was deposited in the aggregated form and was demonstrated to preserve the capability to discriminate, selectively and with an outstanding analytical sensitivity, tyramine in the vapor phase and even if mixed with other aromatic amines.

Cross-Linked Carbon Nanotube Adsorbents for Water Treatment: Tuning the Sorption Capacity through Chemical Functionalization.

The development of carbon-based membrane adsorbent materials for water treatment has become a hot topic in recent years. Among them, carbon nanotubes (CNTs) are promising materials because of its large surface area, high aspect ratio, great chemical reactivity, and low cost. In this work, free-standing CNT adsorbents are fabricated from chemically cross-linked single-walled CNTs. We have demonstrated that by controlling the degree of cross-linking, the nanostructure, porous features, and specific surface area of the resulting materials can be tuned, in turn allowing the control of the adsorption capacities and the improvement of the adsorption performance. The cross-linked CNT adsorbents exhibit a notably selective sorption ability and good recyclability for removal of organics and oils from contaminated water.

Publisher Correction: Hierarchical organization of perylene bisimides and polyoxometalates for photo-assisted water oxidation.

In the version of this Article originally published, in the graphical abstract the y-axis units of the plot read 'mA cm-2', but should have read 'µA cm-2'. Additionally, an erroneous gap appeared in the red trace. These errors have now been corrected.

Hierarchical organization of perylene bisimides and polyoxometalates for photo-assisted water oxidation.

The oxygen in Earth's atmosphere is there primarily because of water oxidation performed by photosynthetic organisms using solar light and one specialized protein complex, photosystem II (PSII). High-resolution imaging of the PSII 'core' complex shows the ideal co-localization of multi-chromophore light-harvesting antennas with the functional reaction centre. Man-made systems are still far from replicating the complexity of PSII, as the majority of PSII mimetics have been limited to photocatalytic dyads based on a 1:1 ratio of a light absorber, generally a Ru-polypyridine complex, with a water oxidation catalyst. Here we report the self-assembly of multi-perylene-bisimide chromophores (PBI) shaped to function by interaction with a polyoxometalate water-oxidation catalyst (Ru4POM). The resulting [PBI]5Ru4POM complex shows a robust amphiphilic structure and dynamic aggregation into large two-dimensional paracrystalline domains, a redshifted light-harvesting efficiency of >40% and favourable exciton accumulation, with a peak quantum efficiency using 'green' photons (λ > 500 nm). The modularity of the building blocks and the simplicity of the non-covalent chemistry offer opportunities for innovation in artificial photosynthesis.

Ionic liquids plus microwave irradiation: a general methodology for the retro-functionalization of single-walled carbon nanotubes.

One of the most important objectives nowadays in the field of chemical modification of carbon nanotubes (CNTs) is to control the degree of functionalization, since excessive modification can disrupt the π-conjugated system and adversely affect their useful properties. Covalent functionalization is one of the most common methods for the modification of single-walled carbon nanotubes (SWCNTs). However, only a few examples have appeared in the last few years regarding the control of the functionalization degree and the reversibility of the reaction. We present here an approach for the retro-functionalization of SWCNTs which could be applied to different types of covalent functionalizations, allowing the restoration of the π-conjugated structure. The process is performed through the combination of ionic liquids plus microwave irradiation and it is applicable to the retro-arylation and retro-cycloaddition reactions on SWCNTs. The successful retro-functionalization is monitored by Raman spectroscopy, thermogravimetric analysis and UV-Vis-NIR spectroscopy.

Inter-Backbone Charge Transfer as Prerequisite for Long-Range Conductivity in Perylene Bisimide Hydrogels.

Hydrogelation, the self-assembly of molecules into soft, water-loaded networks, is one way to bridge the structural gap between single molecules and functional materials. The potential of hydrogels, such as those based on perylene bisimides, lies in their chemical, physical, optical, and electronic properties, which are governed by the supramolecular structure of the gel. However, the structural motifs and their precise role for long-range conductivity are yet to be explored. Here, we present a comprehensive structural picture of a perylene bisimide hydrogel, suggesting that its long-range conductivity is limited by charge transfer between electronic backbones. We reveal nanocrystalline ribbon-like structures as the electronic and structural backbone units between which charge transfer is mediated by polar solvent bridges. We exemplify this effect with sensing, where exposure to polar vapor enhances conductivity by 5 orders of magnitude, emphasizing the crucial role of the interplay between structural motif and surrounding medium for the rational design of devices based on nanocrystalline hydrogels.

Tuning the Carbon Nanotube Selectivity: Optimizing Reduction Potentials and Distortion Angles in Perylenediimides.

Different water-soluble perylenediimides (PDIs) have been used to individualize and stabilize single-walled carbon nanotubes (SWCNTs) in aqueous media. A key feature of the PDIs is that they can be substituted at the bay positions via the addition of two and/or four bromines. This enables control over structural and electronic PDI characteristics, which prompted us to conduct comparative assays with focus on SWCNTs' chirality and charge transfer. Electrochemical, microscopic, and spectroscopic experiments were used to investigate the SWCNT chiral selectivity of PDIs, on the one hand, and charge-transfer reactions between SWCNTs and PDIs, on the other hand.