RESUMEN
The war in Ukraine has had a devastating impact on the environment. Military actions have caused the release of hazardous substances into the environment, such as pollutants and toxic chemicals, that have contaminated the water, soil, and air, posing a threat to both human health and the environment. This has resulted in widespread destruction and contamination of natural habitats and resources and has disrupted wildlife populations and ecosystems. The impacts of military activity on the soils of protected areas are particularly critical, as they are the basis of biotic and landscape diversity and require special management and scientifically based monitoring measures even in peaceful conditions. In this context, this communication paper aims to provide an overview of the impacts of the war on the soils in four Ukrainian protected areas, namely Chornobyl Radiation and Ecological Biosphere Reserve; Desniansko-Starohutskyi National Nature Park; Holosiivskyi National Nature Park, and Hetmanskyi National Nature Park. To address these aspects, this paper combined GIS analysis and secondary data including soil samples obtained during field expeditions, to provide evidence of how ground battles, occupation, terrestrial land mines, and explosions can severely impact the soils. Practical and theoretical implications of the military actions are also discussed.
Asunto(s)
Conservación de los Recursos Naturales , Ucrania , Ecosistema , Suelo , Humanos , Guerra , AmbienteRESUMEN
Melanoma, arguably the deadliest form of skin cancer, is responsible for the majority of skin-cancer-related fatalities. Innovative strategies concentrate on new therapies that avoid the undesirable effects of pharmacological or medical treatment. This article discusses the chemical structures of [(MTZ)2AgNO3], [(MTZ)2Ag]2SO4, [Ag(MCZ)2NO3], [Ag(MCZ)2BF4], [Ag(MCZ)2SbF6] and [Ag(MCZ)2ClO4] (MTZ-metronidazole; MCZ-miconazole) silver(I) compounds and the possible relationship between the molecules and their cytostatic activity against melanoma cells. Molecular Hirshfeld surface analysis and computational methods were used to examine the possible association between the structure and anticancer activity of the silver(I) complexes and compare the cytotoxicity of the silver(I) complexes of metronidazole and miconazole with that of silver(I) nitrate, cisplatin, metronidazole and miconazole complexes against A375 and BJ cells. Additionally, these preliminary biological studies found the greatest IC50 values against the A375 line were demonstrated by [Ag(MCZ)2NO3] and [(MTZ)2AgNO3]. The compound [(MTZ)2AgNO3] was three-fold more toxic to the A375 cells than the reference (cisplatin) and 15 times more cytotoxic against the A375 cells than the normal BJ cells. Complexes of metronidazole with Ag(I) are considered biocompatible at a concentration below 50 µmol/L.
Asunto(s)
Antineoplásicos , Complejos de Coordinación , Melanoma , Metronidazol , Miconazol , Plata , Humanos , Melanoma/tratamiento farmacológico , Melanoma/metabolismo , Melanoma/patología , Miconazol/farmacología , Miconazol/química , Plata/química , Antineoplásicos/farmacología , Antineoplásicos/química , Metronidazol/química , Metronidazol/farmacología , Línea Celular Tumoral , Complejos de Coordinación/farmacología , Complejos de Coordinación/química , Supervivencia Celular/efectos de los fármacos , Neoplasias Cutáneas/tratamiento farmacológico , Neoplasias Cutáneas/patologíaRESUMEN
Alkaline earth metal oxide (MgO, CaO, SrO) catalysts supported on BEA zeolite were prepared by a wet impregnation method and tested in the transesterification reaction of rapeseed oil with methanol towards the formation of biodiesel (FAMEs-fatty acid methyl esters). To assess the influence of the SiO2/Al2O3 ratio on the catalytic activity in the tested reaction, a BEA zeolite carrier material with different Si/Al ratios was used. The prepared catalysts were tested in the transesterification reaction at temperatures of 180 °C and 220 °C using a molar ratio of methanol/oil reagents of 9:1. The transesterification process was carried out for 2 h with the catalyst mass of 0.5 g. The oil conversion value and efficiency towards FAME formation were determined using the HPLC technique. The physicochemical properties of the catalysts were determined using the following research techniques: CO2-TPD, XRD, BET, FTIR, and SEM-EDS. The results of the catalytic activity showed that higher activity in the tested process was confirmed for the catalysts supported on the BEA zeolite characterized by the highest silica/alumina ratio for the reaction carried out at a temperature of 220 °C. The most active zeolite catalyst was the 10% CaO/BEA system (Si/Al = 300), which showed the highest triglyceride (TG) conversion of 90.5% and the second highest FAME yield of 94.6% in the transesterification reaction carried out at 220 °C. The high activity of this system is associated with its alkalinity, high value of the specific surface area, the size of the active phase crystallites, and its characteristic sorption properties in relation to methanol.
Asunto(s)
Biocombustibles , Zeolitas , Óxido de Magnesio , Metanol , Aceite de Brassica napus , Dióxido de Silicio , Ácidos Grasos , ÓxidosRESUMEN
The healing properties of silver have been used since ancient times. The main aim of the study was to collect and review the literature on the clinical potential of silver, its salts and complex compounds. The second goal was to present an outline of the historical use of silver in medicine and pharmacy, taking into account the possibility of producing pharmaceutical drug forms on the premises of pharmacies. In the context of the growing resistance of microorganisms to available, widely used antibiotics, silver plays a key role. There is only one known case of bacterial resistance to silver-the Pseudomonas stutzeri strain, which naturally occurs in silver mines. The development of research in the field of coordination chemistry offers great opportunities in the design of new substances in which silver ions can be incorporated. These substances exhibit increased potency and often an extended antimicrobial spectrum. Silver-based compounds are, however, only limited to external applications, as opposed to their historic oral administration. Advanced studies of their physicochemical, microbiological, cytotoxic and genotoxic properties are ongoing and full of challenges. The improvement of the methods of synthesis gives the possibility of applying the newly synthesized compounds ex tempore, as was the case with the complex of metronidazole with silver (I) nitrate. Some of these experimental efforts performed in vitro are followed with clinical trials. The third and final goal of this study was to present the possibility of obtaining an ointment under the conditions of an actual pharmacy using silver (I) salts and a ligand, both of which are active substances with antimicrobial properties.
Asunto(s)
Antiinfecciosos , Farmacias , Farmacia , Plata/química , Sales (Química) , Antiinfecciosos/farmacología , Antiinfecciosos/química , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Compuestos de Plata , Preparaciones FarmacéuticasRESUMEN
Due to its unique properties, zirconia is increasingly being used in dentistry, but surface preparation for bonding is difficult because of its polycrystalline structure. This study aimed to determine the effect of a new etching technique (Zircos-E) on Ceramill Zi (Amann Girrbach). The effect of etching and the use of primers (Monobond Plus and MKZ Primer) on the bond strength of zirconia with resin cement (NX3) was assessed. Shear bond strength was evaluated after storage in water for 24 h and after thermal aging (5000 thermocycling at 5 °C/55 °C). A scanning electron microscope (Hitachi S-4700) was used to evaluate the surface structure before and after the Zircos-E system. The roughness parameters were assessed using an SJ-410 profilometer. The etched zirconia surface is more homogeneous over the entire surface, but some localized forms of erosion exist. The etching of zirconia ceramics caused changes in the surface structure of zirconia and a significant increase in the shear bond strength between zirconia and resin cement. The use of primers positively affects the adhesion between resin cement and zirconia. Aging with thermocycler significantly reduced the shear bond strength, with one exception-sandblasted samples with MKZ Primer. Standard ceramic surface preparation, involving only alumina sandblasting, does not provide a satisfactory bond. The use of etching with the Zircos-E system and primers had a positive effect on the strength of the zirconium-resin cement connection.
RESUMEN
The goal of this study was to compare the mechanical properties of experimental resin dental composites containing a conventional photoinitiating system (camphorquinone CQ and 2-(dimethylami-no)ethyl methacrylate (DMAEMA)) to a photoinitiator system containing 1-phenyl-1,2 propanedione (PPD) with 2-(dimethylami-no)ethyl methacrylate) or acting alone phenylbis(2,4,6-trimethylbenzoyl)-phosphine oxide (BAPO). The manually produced composites consisted of an organic matrix: bis-GMA (60 wt. %), TEGDMA (40 wt. %), and silanized silica filler (45 wt. %). The composites contained 0.4/0.8 wt. %, 0.8/1.6 wt. %, and 1/2 wt. % of PPD/DMAEMA and another group included 0.25, 0.5, or 1 wt. % of BAPO. Vickers hardness, microhardness (in the nanoindentation test), diametral tensile strength, and flexural strength were assessed, and CIE L* a* b* colorimetric analysis was conducted for each composite produced. The highest average Vickers hardness values were obtained for the composite containing 1 wt. % BAPO (43.73 ± 3.52 HV). There was no statistical difference in the results of diametral tensile strength for the experimental composites tested. The results of 3-point bending tests were the highest for composites containing CQ (77.3 ± 8.84 MPa). Despite the higher hardness of experimental composites including PPD or BAPO, compared with composites with CQ, the overall results indicate that the composite with CQ still represents a better solution when used as a photoinitiator system. Moreover, the composites containing PPD and DMAEMA are not promising in terms of color or mechanical properties, especially as they require significantly longer irradiation times.
Asunto(s)
Resinas Compuestas , Óxidos , Metacrilatos , Bisfenol A Glicidil Metacrilato , Polietilenglicoles , Ensayo de MaterialesRESUMEN
The aim of this research was to compare the biomechanical properties of experimental composites containing a classic photoinitiating system (camphorquinone and 2-(dimethylami-no)ethyl methacrylate) or diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO) as a photoinitiator. The produced light-cured composites consisted of an organic matrix-Bis-GMA (60 wt.%), TEGDMA (40 wt.%) and silanized silica filler (45 wt.%). Composites contained 0.27; 0.5; 0.75 or 1 wt.% TPO. Vickers hardness, microhardness (in the nanoindentation test), diametral tensile strength, resistance to three-point bending and the CIE L* a* b* colorimetric analysis was performed with each composite produced. The highest average Vickers hardness values were obtained for the composite containing 1 wt.% TPO (43.18 ± 1.7HV). The diametral tensile strength remains on regardless of the type and amount of photoinitiator statistically the same level, except for the composite containing 0.5 wt.% TPO for which DTS = 22.70 ± 4.7 MPa and is the lowest recorded value. The highest average diametral tensile strength was obtained for the composite containing 0.75 wt.% TPO (29.73 ± 4.8 MPa). The highest modulus of elasticity characterized the composite containing 0.75 wt.% TPO (5383.33 ± 1067.1 MPa). Composite containing 0.75 wt.% TPO has optimal results in terms of Vickers hardness, diametral tensile strength, flexural strength and modulus of elasticity. Moreover, these results are better than the parameters characterizing the composite containing the CQ/DMAEMA system. In terms of an aesthetic composite containing 0.75 wt.%. TPO is less yellow in color than the composite containing CQ/DMAEMA. This conclusion was objectively confirmed by test CIE L* a* b*.
Asunto(s)
Resinas Compuestas , Óxidos , Aminas , Compuestos de Bifenilo , Bisfenol A Glicidil Metacrilato , Alcanfor/análogos & derivados , Ensayo de Materiales , Metacrilatos , Fosfinas , Polietilenglicoles , Dióxido de SilicioRESUMEN
Two hundred and five samples of whisky, including 170 authentic and 35 fake products, were analyzed in terms of their elemental profiles in order to distinguish them according to the parameter of their authenticity. The study of 31 elements (Ag, Al, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Te, Tl, U, V, Ca, Fe, K, Mg, P, S, Ti and Zn) was performed using the Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) and Cold Vapor-Atomic Absorption (CVAAS) techniques. Additionally, the pH values of all samples were determined by pH-meter, and their isotopic ratios of 88Sr/86Sr, 84Sr/86Sr, 87Sr/86Sr and 63Cu/65Cu were assessed, based on the number of counts by ICP-MS. As a result of conducted research, elements, such as Mn, K, P and S, were identified as markers of whisky adulteration related to the age of alcohol. The concentrations of manganese, potassium and phosphorus were significantly lower in the fake samples (which were not aged, or the aging period was much shorter than legally required), compared to the original samples (in all cases subjected to the aging process). The observed differences were related to the migration of these elements from wooden barrels to the alcohol contained in them. On the other hand, the sulfur concentration in the processed samples was much higher in the counterfeit samples than in the authentic ones. The total sulfur content, such as that of alkyl sulfides, decreases in alcohol with aging in the barrels. Furthermore, counterfeit samples can be of variable origin and composition, so they cannot be characterized as one group with identical or comparable features. Repeatedly, the element of randomness dominates in the production of these kinds of alcohols. However, as indicated in this work, the extensive elemental analysis supported by statistical tools can be helpful, especially in the context of detecting age-related adulteration of whisky. The results presented in this paper are the final part of a comprehensive study on the influence of selected factors on the elemental composition of whisky.
RESUMEN
Materials with potential use as dental restoration should be evaluated in an aggressive environment. Such accelerated aging is widely used in other industries and allows the assessment of service life. In the presented study, three neat resins (UDMA/Bis-GMA/TEGDMA 70/10/20 wt.%, UDMA/Bis-GMA/TEGDMA 40/40/20 wt.% and UDMA/Bis-EMA/TEGDMA 40/40/20 wt.%) and three composites based on these matrices were tested before and after aging protocols (I-7500 cycles, 5 °C and 55 °C, water and 7 days, 60 °C, 0.1 M NaOH; II-5 days, 55 °C, water and 7 days, 60 °C, 0.1 M NaOH). Flexural strength (FS), diametral tensile strength (DTS) and hardness (HV) were determined. Applied aging protocols resulted in a decrease in the value of the FS, DTS and HV. Larger changes were noticed for the neat resins. Materials in which the content of bis-GMA was lower or substituted by bis-EMA showed better resistance to degradation. The choice of mixtures with monomers characterized by lower sorption values may favorably affect hydrolytic stability. It was shown that for composites there was a drastic decrease in hardness, which suggests a more superficial effect of the used protocols. However, degradation of the surface layer can result in a growing problem over time given that the mastication processes are an inherent element in the oral environment.
RESUMEN
Developing new, smart drugs with the anticancer activity is crucial, especially for cancers, which cause the highest mortality in humans. In this paper we describe a series of coordination compounds with the element of health, zinc, and bioactive ligands, benzimidazole derivatives. By way of synthesis we have obtained four compounds named C1, C2, C4 and C4. Analytical analyses (elemental analysis (EA), flame atomic absorption spectrometry (FAAS)), spectroscopic (Fourier transform infrared spectroscopy (FT-IR), mass spectrometry (MS)) and thermogravimetric (TG) methods and the definition of crystal structures were used to explore the nature of bonding and to elucidate the chemical structures. The collected analytical data allowed the determination of the stoichiometry in coordination compounds, thermal stability, crystal structure and way of bonding. The cytotoxicity effect of the new compounds as a potential antitumor agent on the glioblastoma (T98G), neuroblastoma (SK-N-AS) and lung adenocarcinoma (A549) cell lines and human normal skin fibroblasts (CCD-1059Sk) was also determined. Cell viability was determined by the MTT assay. The results obtained confirmed that conversion of ligands into the respective metal complexes significantly improved their anticancer properties. The complexes were screened for antibacterial and antifungal activities. The ADME technique was used to determine the physicochemical and biological properties.
Asunto(s)
Antineoplásicos , Complejos de Coordinación , Antibacterianos/química , Antibacterianos/farmacología , Antineoplásicos/química , Antineoplásicos/farmacología , Bencimidazoles/farmacología , Complejos de Coordinación/química , Complejos de Coordinación/farmacología , Humanos , Ligandos , Pruebas de Sensibilidad Microbiana , Espectroscopía Infrarroja por Transformada de Fourier , Zinc/química , Compuestos de ZincRESUMEN
A total of 170 samples of whisky from 11 countries were analysed in terms of their elemental profiles. The levels of 31 elements were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS): Ag, Al, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Te, Tl, U, and V, Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Ca, Fe, K, Mg, P, S, Ti, and Zn and Cold Vapor-Atomic Absorption (CV-AAS): Hg techniques in those alcoholic samples. A comparative analysis of elemental profiles was made on the basis of the content of chosen elements with regard to selected parameters: country of origin, type of whisky (single malt and blended) and age of products. One of the elements which clearly distinguishes single malt and blended types of whisky is copper. Single malt Scotch whisky had a uniform concentration of copper, which is significantly higher for all malt whisky samples when compared with the blended type. Analysis of samples from the USA (n = 26) and Ireland (n = 15) clearly revealed that the objects represented by the same product but originating from independent bottles (e.g., JB, JDG, BUS brands) show common elemental profiles. On the other hand, comparative analysis of Scotch whisky with respect to aging time revealed that the longer the alcohol was aged, (i.e., the longer it stayed in the barrel), the higher the content of Cu and Mn that was recorded.
RESUMEN
Golden and silver-golden chitosan hydrogels and hydrogel-modified textiles of potential biomedical applications are investigated in this work. The hydrogels are formed by reactions of chitosan with HAuCl4·xH2O. For above the critical concentration of chitosan (c*), chitosan-Au hydrogels were prepared. For chitosan concentrations lower than c*, chitosan-Au nano- and microgels were formed. To characterise chitosan-Au structures, sol-gel analysis, UV-Vis spectrophotometry and dynamic light scattering were performed. Au concentration in the hydrogels was determined by the flame atomic absorption spectrophotometry. Colloidal chitosan-Au solutions were used for the modification of fabrics. The Au content in the modified fabrics was quantified by inductively coupled plasma mass spectrometry technique. Scanning electron microscopy with energy dispersion X-ray spectrometer was used to analyse the samples. Reflectance spectrophotometry was applied to examine the colour of the fabrics. The formation of chitosan-Au-Ag hydrogels by the competitive reaction of Au and Ag ions with the chitosan macromolecules is reported.
Asunto(s)
Quitosano , Plata , Quitosano/química , Hidrogeles/química , Microscopía Electrónica de Rastreo , Plata/química , TextilesRESUMEN
Twenty-five elements, including the most essential and toxic metals, were determined in fifty beer samples stored in cans and bottles by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and Cold Vapor Atomic Absorption Spectroscopy (CVAAS) techniques. The packaging material was analyzed using the Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS) technique. The control of the level of individual metals is necessary, not only to maintain the organoleptic properties of the product, but also to fulfill the standards regarding the permissible maximum concentrations. Metals can originate from different sources, including the brewing water, malt grains, hops, adjuncts, fruits, and spices. They may also come from contamination from the brewery equipment, i.e., vessels and tanks, including beer packing, storing and transporting (kegs, casks, cans). Discriminant analysis revealed that the differentiation of three types of beer (Lager, Ale, Craft) was possible, based on elemental concentrations, for the reduced data set after their selection using the Kruskal-Wallis test. The analysis of the impact of the packaging material (can or bottle) proved that when this parameter was used as a differentiating criterion, the difference in the content of Na, Al, Cu and Mn can be indicated. The risk assessment analysis showed that the consumption of beer in a moderate quantity did not have any adverse effect in terms of the selected element concentrations, besides Al. However, in the case of Al, the risk related to consumption can be considered, but only for the beer stored in cans produced from aluminum.
Asunto(s)
Cerveza , Metales , Cerveza/análisis , Metales/análisis , Polonia , Medición de Riesgo , Espectrofotometría AtómicaRESUMEN
In this publication, novel bio-based composites made of epoxidized natural rubber with 50 mol% of epoxidation (ENR-50) are presented. The obtained materials, partially cured with a totally environmentally friendly crosslinking system consisting of natural ingredients, including quercetin and silica, exhibit a self-healing ability resulting from the self-adhesion of ENR-50 and reversible physical forces between the curing agent and the matrix. The impact of natural components on the crosslinking effect in uncured ENR-50 matrix was analyzed based on rheometric measurements, mechanical tests and crosslinking density. The partially crosslinked samples were next cut into two separate pieces, which were instantly contacted together under a small manual press, left at room temperature for a few days for the healing process to occur and finally retested. The healing efficiency was estimated by measuring mechanical properties before and after the healing process and was also confirmed by photos taken using optical and scanning electron microscope (SEM). According to the results, a combination of silica and quercetin is a totally safe, natural and effective crosslinking system dedicated to epoxidized natural rubber. The novel composites containing ingredients safe for human beings exhibit promising self-healing properties with a healing efficiency of up to 45% without any external stimuli and stand a chance of becoming innovative biomedical materials.
RESUMEN
In this study, total mercury content was determined in 84 canned fish corresponding to commonly consumed brands (over 14 different producers), which were purchased from local markets in Poland in the years 2019-2020. For comparison purposes, samples of both the matrix in which the fish were kept along with the seafood samples were measured. The analyses were carried out using the cold vapor AAS technique. Statistical analyses were employed to identify significant differences in mercury content in relation to the selected criteria such as fish species, type of fish (predatory, non-predatory) and the producer brand. The obtained results were compared against domestic and international standards as well as with the literature data in order to evaluate the safety of the canned fish consumption. The study revealed that none of canned fish exceeded the acceptable levels set by the FAO/WHO. The highest amount of Hg was recorded for canned tuna (maximum 351.30 µg/kg, mean 74.38 µg/kg). Further, the estimated tolerable dose of weekly mercury intake suggests that the consumption of over 1.8 cans of fish with the highest mean mercury content should not pose a risk to consumers in Poland according to international standards. Among the ten highest mean results for mercury, five of them belonged to canned tuna (Bonito species) kept in different matrices. These consisted of seven domestic and three imported brands of fish products, which is a worrying message for a local community. Mercury content in predatory fish differed significantly from the results gathered for non-predatory fish and the total amount of mercury in studied canned fish corresponded to their status in the aquatic food chain. Moreover, significant differences were stated between various fish species and fishing areas. Fish caught in the Atlantic Ocean (cod and herring) presented higher mercury content than the ones from closed seas.