RESUMEN
Polyaniline (PANI) wasin-situpolymerized on nanofibrous polycaprolactone mats as cell-free antioxidant cardiac patches (CPs), providing electrical conductivity and antioxidant properties. The fabricated CPs took advantage of intrinsic and additive antioxidant properties in the presence of PANI backbone and ascorbic acid as a biocompatible dopant of PANI. The antioxidant nature of CPs may reduce the serious repercussions of oxidative stress, produced during the ischemia-reperfusion (I/R) process following myocardial infarction. The polymerization parameters were considered as aniline (60 mM, 90 mM, and 120 mM), ascorbic acid concentrations ([aniline]:[ascorbic acid] = 3:0, 3:0.5, 3:1, 3:3), and polymerization time (1 h and 3 h). Mainly, the more aniline concentrations and polymerization time, the less sheet resistance was obtained. 1,1 diphenyl-2-picrylhydrazyl (DPPH) assay confirmed the dual antioxidant properties of prepared samples. The advantage of the employedin-situpolymerization was confirmed by the de-doping/re-doping process. Non-desirable groups were excluded based on their electrical conductivity, antioxidant properties, and biocompatibility. The remained groups protected H9c2 cells against oxidative stress and hypoxia conditions. Selected CPs reduced the intracellular reactive oxygen species content and mRNA level of caspase-3 while the Bcl-2 mRNA level was improved. Also, the selected cardiac patch could attenuate the hypertrophic impact of hydrogen peroxide on H9c2 cells. Thein vivoresults of the skin flap model confirmed the CP potency to attenuate the harmful impact of I/R.
Asunto(s)
Antioxidantes , Nanofibras , Antioxidantes/farmacología , Ácido Ascórbico/farmacología , Nanofibras/química , Conductividad Eléctrica , Compuestos de Anilina/farmacología , Compuestos de Anilina/química , ARN MensajeroRESUMEN
Regulation of mesenchymal stem cell (MSC) fate for targeted cell therapy applications has been a subject of interest, particularly for tissues such as tendons that possess a marginal regenerative capacity. Control of MSCs' fate into the tendon-specific lineage has mainly been achieved by implementation of chemical growth factors. Mechanical stimuli or 3-dimensional (D) scaffolds have been used as an additional tool for the differentiation of MSCs into tenocytes, but oftentimes, they require a sophisticated bioreactor or a complex scaffold fabrication technique which reduces the feasibility of the proposed method to be used in practice. Here, we used nanovibration to induce the differentiation of MSCs toward the tenogenic fate solely by the use of nanovibration and without the need for growth factors or complex scaffolds. MSCs were cultured on 2D cell culture dishes that were connected to piezo ceramic arrays to apply nanovibration (30-80 nm and 1 kHz frequency) over 7 and 14 d. We observed that nanovibration resulted in significant overexpression of tendon-related markers in both gene expression and protein expression levels, while there was no significant differentiation into adipose and cartilage lineages. These findings could be of assistance in the mechanoregulation of MSCs for stem cell engineering and regenerative medicine applications.
Asunto(s)
Células Madre Mesenquimatosas , Ingeniería de Tejidos , Animales , Ingeniería de Tejidos/métodos , Vibración , Diferenciación Celular , Cordón UmbilicalRESUMEN
AIMS: The process of Epithelial-to-mesenchymal transition (EMT) as a phenotypic invasive shift and the factors affecting it, are under extensive research. Application of supernatants of human adipose-derived mesenchymal stem cells (hADMSCs) on non-invasive cancer cells is a well known method of in vitro induction of EMT like process. While previous researches have focused on the effects of hADMSCs supernatant on the biochemical signaling pathways of the cells through expression of different proteins and genes, we investigated pro-carcinogic alterations of physico-mechanical cues in terms of changes in cell motility and aggregated formation in 3D microenvironments, and cytoskeletal actin-myosin content and fiber arrangement. MAIN METHODS: MCF-7 cancer cells were treated by the supernatant from 48 hour-starved hADMSCs, and their vimentin/E-cadherin expressions were evaluated. The invasive potential of treated and non-treated cells was measured and compared through aggregate formation and migration capability. Furthermore, alterations in cell and nucleus morphologies were studied, and F-actin and myosin-II alterations in terms of content and arrangement were investigated. KEY FINDINGS: Results indicated that application of hADMSCs supernatant enhanced vimentin expression as the biomarker of EMT, and induced pro-carcinogenic effects on non-invasive cancer cells through increased invasive potential by higher cell motility and reduced aggregate formation, rearrangement of actin structure and generation of more stress fibers, together with increased myosin II that lead to enhanced cell motility and traction force. SIGNIFICANCE: Our results indicated that in vitro induction of EMT through mesenchymal supernatant influenced biophysical features of cancer cells through cytoskeletal remodeling that emphasizes the interconnection of chemical and physical signaling pathways during cancer progress and invasion. Results give a better insight to EMT as a biological process and the synergy between biochemical and biophysical parameters that contribute to this process, and eventually assist in improving cancer treatment strategies.
Asunto(s)
Actinas , Neoplasias de la Mama , Humanos , Femenino , Vimentina/metabolismo , Actinas/metabolismo , Línea Celular Tumoral , Neoplasias de la Mama/metabolismo , Microfluídica , Citoesqueleto/metabolismo , Transición Epitelial-Mesenquimal , Proteínas del Citoesqueleto/metabolismo , Movimiento Celular , Microambiente TumoralRESUMEN
Cancer development comprehends changes in cell structural and physical states. Cancer cells are softer than normal cells, produce higher contractile forces, and migrate more easily. While chemotherapy, targets proteins involved in biological behaviors, it may affect cell physicomechanical state due to the interconnections among signaling pathways. Here we treated non-invasive and invasive breast cancer cell lines by targeting EGRF which modulates major biological behaviors. We quantified migration potential of cancer cells in a microfluidic device, and evaluated expression of proteins associated with physical behaviors. Results indicated significant alterations in physical behaviors, with a higher impact on invasive cells. The anti-cancer synergy between biological and physical behaviors was shown by decreasing actin, vinculin, and myosin II content and altered distribution, limiting cell invasion in 3D collagen structure, accompanied by decreasing cell viability and vimentin expression as the EMT biomarker. The center point of changes in physical behaviors was in cytoskeletal remodeling by chemical treatment, potentially through lower contractile force generation and less development of focal adhesions and stress fibers. The synergy between physical and chemical pathways can be used in enhancing anti-cancer drug efficacy.
Asunto(s)
Neoplasias de la Mama , Actinas , Neoplasias de la Mama/tratamiento farmacológico , Adhesión Celular , Línea Celular , Línea Celular Tumoral , Movimiento Celular , Receptores ErbB/farmacología , Femenino , Humanos , MicrofluídicaRESUMEN
The function of biological tissues in health and disease is regulated at cellular level and is highly influenced by the physical microenvironment, through the interaction of forces between cells and ECM, which are perceived through mechanosensing pathways. In cancer, both chemical and physical signaling cascades and their interactions are involved during cell-cell and cell-ECM communications to meet requirements of tumor growth. Among stroma cells, cancer associated fibroblasts (CAFs) play key role in tumor growth and pave the way for cancer cells to initiate metastasis and invasion to other tissues, and without recruitment of CAFs, the process of cancer invasion is dysfunctional. This is through an intense chemical and physical cross talks with tumor cells, and interactive remodeling of ECM. During such interaction CAFs apply traction forces and depending on the mechanical properties, deform ECM and in return receive physical signals from the micromechanical environment. Such interaction leads to ECM remodeling by manipulating ECM structure and its mechanical properties. The results are in form of deposition of extra fibers, stiffening, rearrangement and reorganization of fibrous structure, and degradation which are due to a complex secretion and expression of different markers triggered by mechanosensing of tumor cells, specially CAFs. Such events define cancer progress and invasion of cancer cells. A systemic knowledge of chemical and physical factors provides a holistic view of how cancer process and enhances the current treatment methods to provide more diversity among targets that involves tumor cells and ECM structure.
Asunto(s)
Fibroblastos Asociados al Cáncer/metabolismo , Neoplasias/metabolismo , Animales , Humanos , Neoplasias/patologíaRESUMEN
Regardless of their target and mechanism, anticancer drugs directly influence biological behavior of cancer cells by activating chemical signaling pathways. Due to the complex interaction between diverse signaling pathways, these drugs may profoundly impact the physical characteristics of cancer cells and regulate their mechanical properties. In this study, the effects of two Aromatase Inhibitor (Letrozole and Exemestane), and one mTOR Inhibitor (Everolimus) on cell mechanical properties, actin content/distribution, and nuclear areas of two invasive and non-invasive breast cancer cell line after 24 h treatment with concentrations previously reported were investigated. While metabolic activity of cell lines was highly affected by drug treatment, significant alterations in Young's modulus of cell bodies, nuclear areas, and actin content and distribution were reported with higher impact on invasive cells. It was concluded that regulation of mechanical behavior of cells by all three drugs emphasizes the cross talk between chemical and physical signaling cascades, and describes a correlation between biological and physical behaviors of cancer cells which might give an insight to a better understanding of mechanisms by which anti-cancer drugs function to enhance their performances.
Asunto(s)
Androstadienos/farmacología , Antineoplásicos/farmacología , Neoplasias de la Mama/tratamiento farmacológico , Citoesqueleto/efectos de los fármacos , Everolimus/farmacología , Letrozol/farmacología , Neoplasias de la Mama/metabolismo , Neoplasias de la Mama/patología , Supervivencia Celular/efectos de los fármacos , Citoesqueleto/metabolismo , Femenino , Humanos , Células Tumorales CultivadasRESUMEN
The biophysical properties of cells change with cancer invasion to fulfill their metastatic behavior. Cell softening induced by cancer is highly associated with alterations in cytoskeleton fibers. Changes in the mechanical properties of cytoskeletal fibers have not been quantified due to technical limitations. In this study, we used the micropipette aspiration technique to calculate and compare the viscoelastic properties of non-invasive and invasive breast cancer cells. We evaluated the mechanical properties of actin fibers and microtubules of two cancerous cell lines by using multiscale tensegrity modeling and an optimization method. Cancer invasion caused altered viscoelastic behavior of cells and the results of modeling showed changes in mechanical properties of major cytoskeleton fibers. The stiffness and viscosity constant of actin fibers in non-invasive cells were 1.28 and 2.27 times higher than those of the invasive cells, respectively. However, changes in mechanical properties of microtubules were minor. Immunofluorescent staining of fibers and their quantified distributions confirmed altered actin distribution among two cell lines, in contrast to microtubule distribution. This study highlights the function of cytoskeletal fibers in cancer progression, which could be of interest in designing therapeutic strategies to target cancer progress. Firstly, the viscoelastic behavior of non-invasive and invasive cells is examined with micropipette aspiration tests. A tensegrity model of cells is developed to mimic the viscoelastic behavior of cells, and tensegrity element stiffness is evaluated in an optimization procedure based on micropipette aspiration tests. Finally, by using immunofluorescent staining and confocal imaging, mechanical properties of actin filaments and microtubules of cancer cells are investigated during the course of metastasis.
Asunto(s)
Actinas , Neoplasias , Citoesqueleto de Actina , Citoesqueleto , Microtúbulos , ViscosidadRESUMEN
Atherosclerosis is initiated by endothelial injury that is related to abnormal values of hemodynamic parameters such as wall shear stress (WSS), oscillatory shear index (OSI) and stress phase angle (SPA), which are more common in arterial bifurcations due to the complex structure. An experimental model of human carotid bifurcation with accurate geometrical and mechanical features was set up, and using realistic pulsatile flow rates, the inlet and outlet pressure pulses were measured for normal and stenosed models with 40% and 80% severities at common carotid (CCA), internal carotid (ICA) and external carotid (ECA) arteries. Based on the obtained experimental data, fluid-structure models were developed to obtain WSS, OSI, and SPA and evaluate pathological consequences at different locations. Mild severity had minor impact, however, inducing severe 80% stenosis in each branch led to considerable localized changes of hemodynamic parameters both in the stenosis site and other locations. This included sharp increases in WSS values accompanied by very low values close to zero before and after the peaks. Severe stenosis not only caused significant changes in the local artery, but also in other branches. OSI and SPA were less sensitive to stenosis, although high peaks were observed on bifurcation site for the stenosis at ECA. The interconnection of arteries at carotid bifurcation results in altered pressure/flow patterns in all branches when a stenosis is applied in any site. Such effect confirms pathological findings that atherosclerotic plaques are observed simultaneously in different carotid branches, although with different degrees of plaque growth and severity.
Asunto(s)
Arterias Carótidas/patología , Arterias Carótidas/fisiopatología , Hemodinámica/fisiología , Modelos Cardiovasculares , Placa Aterosclerótica/patología , Placa Aterosclerótica/fisiopatología , Fenómenos Biomecánicos , Simulación por Computador , Hemorreología , Humanos , Presión , Resistencia al Corte , Estrés Mecánico , Factores de TiempoRESUMEN
OBJECTIVE: Dentin is a viscoelastic tissue that contributes to the load distribution in human teeth and leads to their fracture resistance. Despite previous researches on the time-dependent behavior of dentin, it is not very clear whether the viscoelastic behavior of this tissue is linear or nonlinear, and what viscoelastic constitutive equations mechanically characterize it. Therefore, the aim of this study was to describe the viscoelastic behavior of human dentin and determine the best-fitting viscoelastic model for this tissue. METHODS: After preparation of human dentin specimens from 50 subjects, tensile stress relaxation tests were performed at 1%, 3%, 5% and 7% strain amplitudes. We first evaluated the viscoelastic linearity of this tissue and then fitted the experimental data using different constitutive models, namely, 2-, 3- and 4-term Prony series for linear viscoelasticity, Fung's quasilinear viscoelastic model, and also Schapery and modified superposition models for nonlinear viscoelasticity. RESULTS: Despite an almost linear trend at small strains up to 5%, the relaxation rate generally depended on strain amplitude, indicating some degree of nonlinearity in dentine viscoelasticity. According to the results of data fitting using different models, the modified superposition formulation could best capture the viscoelastic behavior of human dentin. SIGNIFICANCE: In this study, we have quantitatively examined the viscoelastic behavior of human dentin, using a large number of samples. We have obtained the coefficients of various viscoelastic formulations, which can be utilized in subsequent researches on human dentin assuming linear, quasilinear or nonlinear viscoelasticity for this tissue.
Asunto(s)
Modelos Biológicos , Dinámicas no Lineales , Dentina , Elasticidad , Humanos , Estrés Mecánico , ViscosidadRESUMEN
Different biochemical and biomechanical cues from tumor microenvironment affect the extravasation of cancer cells to distant organs; among them, the mechanical signals are poorly understood. Although the effect of substrate stiffness on the primary migration of cancer cells has been previously probed, its role in regulating the extravasation ability of cancer cells is still vague. Herein, we used a microfluidic device to mimic the extravasation of tumor cells in a 3D microenvironment containing cancer cells, endothelial cells, and the biological matrix. The microfluidic-based extravasation model was utilized to probe the effect of substrate stiffness on the invasion ability of breast cancer cells. MCF7 and MDA-MB-231 cancer cells were cultured among substrates with different stiffness which followed by monitoring their extravasation capability through the microfluidic device. Our results demonstrated that acidic collagen at a concentration of 2.5 mg/ml promotes migration of cancer cells. Additionally, the substrate softening resulted in up to 46% reduction in the invasion of breast cancer cells. The substrate softening not only affected the number of extravasated cells but also reduced their migration distance up to 53%. We further investigated the secreted level of matrix metalloproteinase 9 (MMP9) and identified that there is a positive correlation between substrate stiffening, MMP9 concentration, and extravasation of cancer cells. These findings suggest that the substrate stiffness mediates the cancer cells extravasation in a microfluidic model. Changes in MMP9 level could be one of the possible underlying mechanisms which need more investigations to be addressed thoroughly.
Asunto(s)
Neoplasias de la Mama/metabolismo , Movimiento Celular , Técnicas Analíticas Microfluídicas , Modelos Biológicos , Microambiente Tumoral , Femenino , Humanos , Células MCF-7 , Invasividad NeoplásicaRESUMEN
The physical cues of tumor microenvironment (TME) contribute greatly to the initiation and progression of cancer. Tumor tissues usually become stiffer than healthy tissues with more aligned fibers and changed porosity. In recent years, numerous studies attempted to investigate whether biophysical cues from the surrounding environment affect the biophysical, biochemical, and biological behavior of cells and consequently attribute to the development of cancer. Here, we review recent advances of our understanding of these physical cues in terms of extracellular matrix (ECM) stiffness and topography (alignment and porosity). We discuss the underlying mechanisms of changes in TME physical parameters. Then, we summarize how cancer cells sense the mechanical signals, transfer them to the downstream signaling pathways, and finally translate them to different cellular behaviors. Specifically, we discuss the role of mechanical changes of ECM in cancer cell stiffness, actin cytoskeleton organization, gene and protein expressions, the migration of cancer cells, and their response to specific treatments. We then review different methods which have been successfully utilized to model ECM physical properties. This review paper concluded with the limitations of current studies which followed by some insights into clarifying the therapeutic potential of ECM mechanical properties to target and control the development of cancer.
Asunto(s)
Movimiento Celular , Citoesqueleto/metabolismo , Matriz Extracelular/metabolismo , Neoplasias/metabolismo , Transducción de Señal , Microambiente Tumoral , Animales , Citoesqueleto/patología , Matriz Extracelular/patología , Humanos , Invasividad NeoplásicaRESUMEN
Cancer, as a major cause of mortality, is highly related to alterations in the structure and behavior of cells of cancerous tissues. The invasive nature of cancer cells is correlated with their increased traction force, high deformability and altered cell adhesion. These changes are directly attributed to the remodeling of cell cytoskeleton mostly in actin structure. While microtubules and intermediate filaments are mostly involved in mechanical properties of cytoskeleton, actin fibers actively contribute to not only mechanical properties, but also other aspects. Hence study of actin mechanics assists in a deeper understanding of cancer related events. Here, with a biomechanical perspective, we describe the cytoskeleton changes in cancer onset and progress in fiber and protein levels, with focus on actin structure in terms of content and arrangement. Cytoskeleton remodeling and particularly alterations in the content and arrangement of actin structure, highly influence cell mechanical properties, force generation and adhesion potentials.
Asunto(s)
Citoesqueleto de Actina/metabolismo , Neoplasias/metabolismo , Fenómenos Biomecánicos , Adhesión Celular , Humanos , Neoplasias/etiología , Neoplasias/fisiopatologíaRESUMEN
BACKGROUND: Different diseases affect both mechanical and chemical features of the involved tissue, enhancing the symptoms. METHODS: In this study, using atomic force microscopy, we mechanically characterized human ovarian tissues with four distinct pathological conditions: mucinous, serous, and mature teratoma tumors, and non-tumorous endometriosis. Mechanical elasticity profiles were quantified and the resultant data were categorized using K-means clustering method, as well as fuzzy C-means, to evaluate elastic moduli of cellular and non-cellular parts of diseased tissues and compare them among four disease conditions. Samples were stained by hematoxylin-eosin staining to further study the content of different locations of tissues. RESULTS: Pathological state vastly influenced the mechanical properties of the ovarian tissues. Significant alterations among elastic moduli of both cellular and non-cellular parts were observed. Mature teratoma tumors commonly composed of multiple cell types and heterogeneous ECM structure showed the widest range of elasticity profile and the stiffest average elastic modulus of 14 kPa. Samples of serous tumors were the softest tissues with elastic modulus of only 400 Pa for the cellular part and 5 kPa for the ECM. Tissues of other two diseases were closer in mechanical properties as mucinous tumors were insignificantly stiffer than endometriosis in cellular part, 1300 Pa compared to 1000 Pa, with the ECM average elastic modulus of 8 kPa for both. CONCLUSION: The higher incidence of carcinoma out of teratoma and serous tumors may be related to the intense alteration of mechanical features of the cellular and the ECM, serving as a potential risk factor which necessitates further investigation.
Asunto(s)
Microscopía de Fuerza Atómica , Nanopartículas/química , Ovario/patología , Ovario/ultraestructura , Adulto , Fenómenos Biomecánicos , Módulo de Elasticidad , Matriz Extracelular/metabolismo , Femenino , Humanos , Persona de Mediana EdadRESUMEN
Loss of vascular elasticity results from progressive degeneration of the extracellular matrix of elastic arteries under the effect of aging and certain diseases, including atherosclerosis. To investigate the influence of vessel wall stiffening on endothelial cell (EC) function, we seeded human umbilical vein ECs onto variably compliant polydimethylsiloxane substrates. When plated on the more compliant substrate, ECs assembled into capillary-like structures. By contrast, they failed to form a network on stiff substrates, even in the presence of vascular endothelial growth factor (VEGF). Cell proliferation and migration increased with stiffness, while ECs released more nitric oxide (NO) on the soft substrate. Treatment with VEGF increased migration and NO release in a stiffness-dependent manner. Atomic force microscopy measurement of cell elasticity along with actin fiber analysis revealed that ECs plated on the more compliant surface were mechanically softer, with mostly diffuse actin arrangement. Our results demonstrate that matrix stiffening induces actin reorganizations, reflected by cortical stiffening in ECs, which may lead to a decrease in their angiogenic capacity and NO release. Hence, the mechanical properties of ECs display a prognostic and therapeutic potential and might serve as a reliable biomarker of vascular function.
Asunto(s)
Células Endoteliales de la Vena Umbilical Humana/metabolismo , Neovascularización Fisiológica/fisiología , Óxido Nítrico/metabolismo , Adhesión Celular/efectos de los fármacos , Movimiento Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Células Endoteliales de la Vena Umbilical Humana/efectos de los fármacos , Humanos , Neovascularización Fisiológica/efectos de los fármacos , Factor A de Crecimiento Endotelial Vascular/farmacologíaRESUMEN
BACKGROUND: Cancerous transformation of cells affects their mechanical behavior and cytoskeleton structure. OBJECTIVE: The objective of this research is to investigate a correlation between mechanical properties and cytoskeletal structure features in cancer cell formation. METHODS: Micropipette aspiration was used to compare mechanical properties of normal (MCF10A) and cancerous (T47D) epithelial breast cell lines. Immunofluorescence and confocal microscopy were employed for staining and imaging F-actin and microtubules, and quantifying their fluorescent intensity, anisotropy and fiber distribution. RESULTS: Results indicated higher F-actin intensity (43%) and anisotropy (50%) in normal cells compared to cancer cells, although there was no difference in the microtubules intensity between cell lines. Furthermore, reductions of cortex thickness and actin layer index (60%) were observed in suspended cancer cells compared to normal cells. Changes in cell physical properties induced by cancer were attributed to microtubules. The arranged fibrous structure of microtubules in normal cells was replaced by a disorganized structure in cancer cells. Cancerous cells were about four times softer with higher creep compliance compared to normal cells. CONCLUSIONS: Results of this study confirmed that alterations in cell mechanical properties induced by cancer are highly correlated with changes in F-actin and microtubule content and arrangement. It is suggested that such changes can enhance our knowledge of cancer initiation and progression.
Asunto(s)
Neoplasias de la Mama/química , Citoesqueleto/química , Actinas/química , Actinas/metabolismo , Fenómenos Biomecánicos , Neoplasias de la Mama/metabolismo , Línea Celular , Línea Celular Tumoral , Citoesqueleto/metabolismo , Femenino , Humanos , Microtúbulos/química , Microtúbulos/metabolismoRESUMEN
To date, a myriad of strategies has been suggested for targeting the chemical signaling of cancer cells. Also, biomechanical features are gaining much more attention. These features can be used as biomarkers which influence cancer progression. Current approaches on cancer treatment are mainly focused on changing the biochemical signaling of cancer cells, whereas less attention was devoted to their biomechanical properties. Herein, we propose targeting of cancer cell mechanics through the microenvironmental mechanical and chemical cues. As such, we examined the role of substrate stiffness as well as the effect of epidermal growth factor receptor (EGFR) blockade in the cell mechanics. As a mechanical stimulus, stiff and soft polydimethylsiloxane substrates were utilized, while as a chemical stimulus, EGFR blockade was considered. Thus, breast cancer cell lines, MCF7 and MDA-MB-231, were cultured among chemical and mechanical groups. The local elasticity of cancer cells was assessed by atomic force microscopy nanoindentation method. Furthermore, we evaluated the effect of mentioned mechanical and chemical treatments on the morphology, actin cytoskeleton structures, and cancer cell migration abilities. The stiffness and migration ability of cancer cells increased by substrate stiffening while Cetuximab treatment demonstrated an elevation in the elastic modulus of cells followed by a reduction in the migration ability. These findings indicate that cancer cell mechanics is modulated not only by the mechanical cues but also by the chemical ones through EGFR signaling pathway. Overall, our results illustrate that manipulation of cell mechanics allows for the possible modulation of tumor cell migration. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1569-1581, 2019.
Asunto(s)
Citoesqueleto de Actina/metabolismo , Neoplasias/metabolismo , Estrés Mecánico , Citoesqueleto de Actina/efectos de los fármacos , Muerte Celular/efectos de los fármacos , Línea Celular Tumoral , Movimiento Celular/efectos de los fármacos , Forma de la Célula/efectos de los fármacos , Dimetilpolisiloxanos/farmacología , Módulo de Elasticidad , Humanos , Microscopía de Fuerza Atómica , Neoplasias/patologíaRESUMEN
Atherosclerosis is a major risk factor for cardiovascular disease. However, mechanisms of interaction of atherosclerotic plaque development and local stiffness of the lamellar structure of the arterial wall are not well established. In the current study, the local Young's modulus of the wall and plaque components were determined for three different groups of healthy, mildly diseased and advanced atherosclerotic human abdominal aortas. Histological staining was performed to highlight the atherosclerotic plaque components and lamellar structure of the aortic media, consisting of concentric layers of elastin and interlamellar zones. The force spectroscopy mode of the atomic force microscopy was utilized to determine Young's moduli of aortic wall lamellae and plaque components at the micron level. The high variability of Young's moduli (E) at different locations of the atherosclerotic plaque such as the fibrous cap (E = 15.5± 2.6 kPa), calcification zone (E = 103.7±19.5 kPa), and lipid pool (E = 3.5±1.2 kPa) were observed. Reduction of elastin lamellae stiffness (18.6%), as well as stiffening of interlamellar zones (50%), were detected in the diseased portion of the medial layer of abdominal aortic wall compared to the healthy artery. Additionally, significant differences in the stiffness of both elastin lamellae and interlamellar zones were observed between the diseased wall and disease-free wall in incomplete plaques. Our results elucidate the alternation of the stiffness of different lamellae in the human abdominal aortic wall with atherosclerotic plaque development and may provide new insight on the remodeling of the aortic wall during the progression of atherosclerosis.
Asunto(s)
Aorta Abdominal/patología , Enfermedades de la Aorta/patología , Aterosclerosis/patología , Tejido Elástico/patología , Microscopía de Fuerza Atómica , Placa Aterosclerótica , Remodelación Vascular , Adulto , Estudios de Casos y Controles , Módulo de Elasticidad , Humanos , Persona de Mediana Edad , Índice de Severidad de la EnfermedadRESUMEN
Altered microenvrionmental mechanical cues induce cytoskeletal remodeling in cells and have a profound impact on their functions as well as rheological properties. This article is aimed to characterize the viscoelastic behavior of endothelial cells, cultivated on variably compliant substrates. Synthetic tunable poly(dimethylsyloxane) substrates, with elastic moduli ranging from 1.5 MPa to 3 kPa, were used to trigger cytoskeletal remodeling of endothelial cells, verified by morphological analysis and actin fluorescent labeling. Elasticity and stress relaxation tests were conducted using an AFM, resulting in a wide range of data. To account for this heterogeneity, fuzzy c-means clustering algorithm was applied to partition elastic data into biologically meaningful groups, representative of different regions in cells. Nanocharacterization of biomechanical properties, along with cytoskeletal studies, proved a significant correlation between substrate flexibility and viscoelasticity of the cells. Regardless of the viscoelastic model applied, increasing substrate rigidity was related to an overall increase in cell stiffness and apparent viscosity (2.95 ± 1.56 kPa and 921.45 ± 102.46 Pa.s for the stiff substrate; 2.17 ± 1.30 kPa and 557.37 ± 494.11 Pa.s for the intermediate substrate), associated with an organized actin cytoskeleton. Conversely, cells on soft substrate were more deformable (1.84 ± 1.3 kPa) and less viscous (327.13 ± 124.25 Pa.s), exhibiting an increased actin disorganization. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 71-80, 2019.
Asunto(s)
Citoesqueleto/metabolismo , Dimetilpolisiloxanos , Células Endoteliales de la Vena Umbilical Humana/metabolismo , Modelos Biológicos , Citoesqueleto/ultraestructura , Células Endoteliales de la Vena Umbilical Humana/ultraestructura , Humanos , Microscopía de Fuerza Atómica , Reología , Propiedades de SuperficieRESUMEN
Substrate stiffness and topography are two powerful means by which mesenchymal stem cells (MSCs) activities can be modulated. The effects of substrate stiffness on the MSCs mechanical properties were investigated previously, however, the role of substrate topography in this regard is not yet well understood. Moreover, in vessel wall, these two physical cues act simultaneously to regulate cellular function, hence it is important to investigate their cooperative effects on cellular activity. Herein, we investigated the combined effects of substrate stiffness, substrate topography and culture time on the mechanical behavior of MSCs. The MSCs were cultured on the stiff and soft substrates with or without micro-grooved topography for 10 days and their viscoelastic properties and smooth muscle (SM) gene expression were investigated on days 2, 6 and 10. In general, substrate topography significantly interacted with substrate stiffness as well as culture time in the modulation of cell viscoelastic behavior and SM gene expression. The micro-grooved, stiff substrates resulted in the maximum cell stiffness and gene expression of α-actin and h1-calponin, and these values were detected to be minimum in the smooth, soft substrates. The findings can be helpful in the mechano-regulation of MSCs for vascular tissue engineering applications.
Asunto(s)
Actinas/genética , Proteínas de Unión al Calcio/genética , Mecanotransducción Celular , Células Madre Mesenquimatosas/metabolismo , Proteínas de Microfilamentos/genética , Miocitos del Músculo Liso/metabolismo , Andamios del Tejido , Actinas/metabolismo , Fenómenos Biomecánicos , Proteínas de Unión al Calcio/metabolismo , Diferenciación Celular , Células Cultivadas , Elasticidad , Regulación de la Expresión Génica , Dureza , Humanos , Células Madre Mesenquimatosas/citología , Proteínas de Microfilamentos/metabolismo , Miocitos del Músculo Liso/citología , Factores de Tiempo , Ingeniería de Tejidos , Viscosidad , CalponinasRESUMEN
Stiffness of the arterial wall and atherosclerotic plaque components is a determinant of the stress field within plaques, which has been suggested to be an indicator of plaque vulnerability. The diversity and inhomogeneous structure of atherosclerotic lesions complicate the characterization of plaque components. In the present study, stiffness of the arterial wall and atherosclerotic plaque components in human coronary arteries was examined in early and developed atherosclerotic lesions. The force-spectroscopy mode of the atomic force microscope and histological examination were used for determination of elastic moduli at specified locations within samples. Fibrous cap (E = 14.1 ± 3.8 kPa) showed lower stiffness than the fibrous tissue beneath the lipid pool (E = 17.6 ± 3.2 kPa). Calcification zones (E = 96.1 ± 18.8 kPa) and lipid pools (E = 2.7 ± 1.8 kPa) were the stiffest and softest components of atherosclerotic lesions, respectively. The increase of media stiffness (%44.8) and reduction of the elastic modulus of the internal elastic lamina (%28.9) was observed in coronary arteries. Moreover, significant differences were observed between the stiffness of medial layer in diseased parts and free-plaque segments in incomplete plaques of coronary arteries. Our results can be used for better understanding of remodeling mechanisms of the arterial wall with plaque development. Graphical abstract Stiffness alteration of the arterial wall and atherosclerotic plaque components with plaque development in coronary arteries.