RESUMEN
The production of date syrup yields a substantial amount of date press cake (DPC), fibrous and moisturising material with great potential for generating value through bioprocessing. However, the recalcitrant structure of DPC affects the yield of products in bioprocesses. To boost the accessibility of the structure as well as increase the soluble fraction of carbohydrates and facilitate further enzymatic hydrolysis, hydrothermal and dilute acid (0.5% (v/v) sulfuric acid) pretreatments as cost-effective and feasible methods were applied on DPC at relatively low temperatures (80, 100, 120 and 140 °C) and reaction times (60 and 90 min). The success in pretreatment was then evaluated by a post-enzymatic treatment using an enzyme cocktail of cellulases and hemicelluloses. Based on total accessible sugar with minimum produced inhibitors, an optimal operating condition was considered acid pretreatment at 120 °C for 90 min with a 55.02% increase in total sugar yield. To explore the potential use of pretreated DPC, an anaerobic digestion was conducted on untreated and acid-pretreated DPC at 120 °C for 90 min. The results showed that pretreatment increased the total bioproduct yield, including hydrogen, ethanol, and volatile fatty acid yields, by 59.75%. This demonstrates the significant impact of pretreatment on product yields in a bioprocess.
Asunto(s)
Ácidos Sulfúricos , Hidrólisis , Ácidos Sulfúricos/química , Etanol/química , Temperatura , Ácidos/químicaRESUMEN
The aims of the present research include (1) optimization of extraction from Vaccinium myrtillus leaf waste via investigation of plant material:medium ratio, extraction medium, and extraction period, employing extractions at room and high temperatures, or using ultrasound and microwaves (M, HAE, UAE, and MAE, respectively), (2) physicochemical characterization, and (3) investigation of extract biological potential. The statistical analysis revealed that optimal levels of parameters for the greatest polyphenolic yield were a proportion of 1:30 g/mL, ethyl alcohol 50% (v/v) during 2 min of microwave irradiation. By LC-MS analysis, 29 phenolic components were detected; HAE showed the highest richness of almost all determined polyphenols, while chlorogenic acid and quercetin 3-O-glucuronide were dominant. All extracts showed a high inhibition of Staphylococcus aureus growth. The effect of different parameters on extracts' antioxidant capacity depended on the used tests. The extracts also showed a stimulative influence on keratinocyte viability and anti-inflammatory activity (proven in cell-based ELISA and erythrocyte stabilization assays). The extraction procedure significantly affected the extraction yield (MAE ≥ maceration ≥ UAE ≥ HAE), whereas conductivity, density, surface tension, and viscosity varied in a narrow range. The presented research provides evidence on the optimal extraction conditions and technique, chemical composition, and antioxidant, antimicrobial, anti-inflammatory, and keratinocyte viability properties of bilberry extracts for potential applications in pharmacy and cosmetics.
RESUMEN
Flue gases are the gases which are produced from industries related to chemical manufacturing, petrol refineries, power plants and ore processing plants. Along with other pollutants, sulfur present in the flue gas is detrimental to the environment. Therefore, environmentalists are concerned about its removal and recovery of resources from flue gases due to its activation ability in the atmosphere to transform into toxic substances. This review is aimed at a critical assessment of the techniques developed for resource recovery from flue gases. The manuscript discusses various bioreactors used in resource recovery such as hollow fibre membrane reactor, rotating biological contractor, sequential batch reactor, fluidized bed reactor, entrapped cell bioreactor and hybrid reactors. In conclusion, this manuscript provides a comprehensive analysis of the potential of thermotolerant and thermophilic microbes in sulfur removal. Additionally, it evaluates the efficacy of a multi-enzyme engineered bioreactor in this process. Furthermore, the study introduces a groundbreaking sustainable model for elemental sulfur recovery, offering promising prospects for environmentally-friendly and economically viable sulfur removal techniques in various industrial applications.
Asunto(s)
Contaminantes Atmosféricos , Contaminantes Ambientales , Gases/química , Azufre/química , Reactores BiológicosRESUMEN
Rhodosporidium toruloides, an oleaginous yeast, is a potential feedstock for biodiesel production due to its ability to utilize lignocellulosic biomass-derived hydrolysate with a considerably high lipid titer of 50-70 % w/w. Hence, for the first-time environmental assessment of large-scale R. toruloides-based biodiesel production from wood hydrolysate and crude glycerol was conducted. The global warming potential was observed to be 0.67 kg CO2 eq./MJ along with terrestrial ecotoxicity of 1.37 kg 1,4-DCB eq./MJ and fossil depletion of 0.13 kg oil eq./MJ. The highest impacts for global warming (â¼45 %) and fossil depletion (â¼37 %) are attributed to the use of chloroform for lipid extraction while fuel consumption for transportation contributed more than 50 % to terrestrial ecotoxicity. Further, sensitivity analysis revealed that maximizing biodiesel yield by increasing lipid yield and solid loading could contribute to reduced environmental impacts. In nutshell, this investigation reveals that environmental impact varies with the type of chemical utilized.
Asunto(s)
Basidiomycota , Glicerol , Rhodotorula , Biocombustibles , Madera , LípidosRESUMEN
BACKGROUND: As demand for high quality animal feed continues to raise, it becomes increasingly important to minimize the environmental impact of feed production. An appealing sustainable approach to provide feed fractions is to use organic residues from agro-food industry. In this regard, volatile fatty acids (VFAs) such as acetic, propionic and butyric acids, derived from bioconversion of organic residues can be used as precursors for production of microbial protein with ruminant feed inclusion potential. This study aims to investigate the in vitro digestibility of the Aspergillus oryzae edible fungal biomass cultivated on VFAs-derived from anaerobic digestion of residues. The produced fungal protein biomass, along with hay clover silage and rapeseed meal were subjected to various in vitro assays using two-stage Tilley and Terry (TT), gas, and bag methods to evaluate and compare its digestibility for application in ruminant feed. RESULTS: The produced fungal biomass contained a higher crude protein (CP) (41%-49%) and rather similar neutral detergent fiber (NDF) (41%-56%) compared to rapeseed meal. The rumen in vitro dry matter digestibility (IVDMD) of the fungal biomass in the TT method ranged from 82% to 88% (statistically similar to that of the gas method (72% to 85%)). The IVDMD of fungal biomass were up to 26% and 40% greater than that of hay clover silage and rapeseed meal, respectively. The type of substrate and bag method had pronounced effect on the fermentation products (ammonium-N (NH4+-N), total gas and VFAs). Fungal biomass digestion resulted in the highest release of NH4+-N (340-540 mg/L) and the ratio of acetate to propionate ratio (3.5) among subjected substrates. CONCLUSION: The results indicate that gas method can be used as a reliable predictor for IVDMD as well as fermentation products. Furthermore, the high IVDMD and fermentation product observed for Aspergillus oryzae fungal biomass digestion, suggest that the supplementation of fungal biomass will contribute to improving the rumen digestion by providing necessary nitrogen and energy to the ruminant and microbiota.
RESUMEN
BACKGROUND: A cost-effective pretreatment and saccharification process is a necessary prerequisite for utilizing lignocellulosic biomass (LCB) in biofuel and biomaterials production. Utilizing a multifunctional enzyme with both pretreatment and saccharification functions in a single step for simultaneous biological pretreatment and saccharification process (SPS) will be a green method of low cost and high efficiency. Manganese peroxidase (MnP, EC 1.11.1.13), a well-known lignin-degrading peroxidase, is generally preferred for the biological pretreatment of biomass. However, exploring the role and performance of MnP in LCB conversion will promote the application of MnP for lignocellulose-based biorefineries. RESULTS: In this study, we explored the ability of an MnP from Moniliophthora roreri, MrMnP, in LCB degradation. With Mn2+ and H2O2, MrMnP decomposed 5.0 g/L carboxymethyl cellulose to 0.14 mM of reducing sugar with a conversion yield of 5.0 mg/g, including 40 µM cellobiose, 70 µM cellotriose, 20 µM cellotetraose, and 10 µM cellohexaose, and degraded 1.0 g/L mannohexaose to 0.33 µM mannose, 4.08 µM mannotriose, and 4.35 µM mannopentaose. Meanwhile, MrMnP decomposed 5.0 g/L lichenan to 0.85 mM of reducing sugar with a conversion yield of 30.6 mg/g, including 10 µM cellotriose, 20 µM cellotetraose, and 80 µM cellohexose independently of Mn2+ and H2O2. Moreover, the versatility of MrMnP in LCB deconstruction was further verified by decomposing locust bean gum and wheat bran into reducing sugars with a conversion yield of 54.4 mg/g and 29.5 mg/g, respectively, including oligosaccharides such as di- and tri-saccharides. The catalytic mechanism underlying MrMnP degraded lignocellulose was proposed as that with H2O2, MrMnP oxidizes Mn2+ to Mn3+. Subsequently, it forms a complex with malonate, facilitating the degradation of CMC and mannohexaose into reducing sugars. Without H2O2, MrMnP directly oxidizes malonate to hydroperoxyl acetic acid radical to form compound I, which then attacks the glucosidic bond of lichenan. CONCLUSION: This study identified a new function of MrMnP in the hydrolysis of cellulose and hemicellulose, suggesting that MrMnP exhibits its versatility in the pretreatment and saccharification of LCB. The results will lead to an in-depth understanding of biocatalytic saccharification and contribute to forming new enzymatic systems for using lignocellulose resources to produce sustainable and economically viable products and the long-term development of biorefinery, thereby increasing the productivity of LCB as a green resource.
RESUMEN
Volatile fatty acids (VFAs) supplementation in ruminants' diet as a source of energy and chemical precursors and their effect on animal's physiology and well-being has long been of scientific interest. Production of VFAs through anaerobic digestion of agro-industrial residues not only creates value but also presents an alternative sustainable approach for ruminant feed supplementation. Therefore, this study aimed to investigate the bioconversion of agro-industrial residues produced in large quantities such as apple pomace (AP), thin stillage (Ts), and potato protein liquor (PPL) to VFAs, fully complying to regulations set for ruminant feed supplement production. In this regard, batch acidogenic fermentation assays (pH 6-10) and semi-continuous immersed membrane bioreactor (iMBR) were applied. In batch assays, at pH 10 the co-digestion of Ts and PPL produced the highest VFAs concentration (14.2 g/L), indicating a yield of 0.85 g CODVFAs/g volatile solids (VS)added. The optimum batch condition was then applied in the iMBR for in situ fermentation and recovery of VFAs at different organic loading rates (OLR). With increasing the OLR to 3.7 gVS/L.day, the highest VFAs concentration of 28.6 g/L (1,2 g CODVFAs /gVSadded) was achieved. Successful long-term (114 days) membrane filtration was conducted in a media with a maximum of 40 g/L of total solids (TS), facing irreversible membrane fouling in the final stages. Acidogenic fermentation using an iMBR has the potential to play an important role in the future of feed additive provision through the biorefining of agro-industrial wastes via the carboxylate platform, given the role of VFAs production from organic residues.
RESUMEN
Brewer's spent grain (BSG) is a clean byproduct from the food sector, comprising 85% of the brewing process solid byproducts. BSG is mainly used as low-quality animal feed and often ends up in landfills due to its short shelf life. However, considering its abundant availability and high nutritional content, BSG holds the potential for biorefineries to produce valuable products. The recalcitrant nature of BSG poses a challenge, requiring pretreatment steps. Therefore, this study focused on valorizing BSG obtained from organosolv pretreatment by producing food- and feed-grade single-cell protein (SCP). The BSG was subject to organosolv pretreatment at 180C for 2 h with 50% v/v ethanol as solvent. Filamentous fungi N. intermedia and A. oryzae were cultivated on as-received and different fractions of organosolv-treated BSG to evaluate the effect of factors such as pretreatment, fungal strain, pretreated fraction content, and substrate loading on fungal biomass yield, biomass composition (protein content), and metabolite production. A. oryzae cultivation on all tested substrates yielded 7%-40% more biomass than N. intermedia. Cultivating A. oryzae on organosolv liquor resulted in the highest biomass protein content (44.8% ± 0.7%) with a fungal biomass concentration of 5.1 g/L. A three-fold increase in the substrate loading increased the ethanol-to-substrate yield by 50%, while protein content was decreased by 23%. Finally, a biorefinery concept was proposed to integrate the organosolv pretreatment of BSG with fungal cultivation for maximum yield of SCP while obtaining other products such as lignin and ethanol, providing a sustainable rout for managing BSG.
Asunto(s)
Bebidas Alcohólicas , Grano Comestible , Animales , Fermentación , Grano Comestible/química , Grano Comestible/metabolismo , Lignina/análisis , Etanol/análisis , Etanol/metabolismoRESUMEN
Volatile fatty acids (VFAs) appear to be an economical carbon feedstock for the cost-effective production of polyhydroxyalkanoates (PHAs). The use of VFAs, however, could impose a drawback of substrate inhibition at high concentrations, resulting in low microbial PHA productivity in batch cultivations. In this regard, retaining high cell density using immersed membrane bioreactor (iMBR) in a (semi-) continuous process could enhance production yields. In this study, an iMBR with a flat-sheet membrane was applied for semi-continuous cultivation and recovery of Cupriavidus necator in a bench-scale bioreactor using VFAs as the sole carbon source. The cultivation was prolonged up to 128 h under an interval feed of 5 g/L VFAs at a dilution rate of 0.15 (d-1), yielding a maximum biomass and PHA production of 6.6 and 2.8 g/L, respectively. Potato liquor and apple pomace-based VFAs with a total concentration of 8.8 g/L were also successfully used in the iMBR, rendering the highest PHA content of 1.3 g/L after 128 h of cultivation. The PHAs obtained from both synthetic and real VFA effluents were affirmed to be poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with a crystallinity degree of 23.8 and 9.6%, respectively. The application of iMBR could open an opportunity for semi-continuous production of PHA, increasing the feasibility of upscaling PHA production using waste-based VFAs.
RESUMEN
Due to resource scarcity, current industrial systems are switching from waste treatment, such as wastewater treatment and biomass, to resource recovery (RR). Biofuels, manure, pesticides, organic acids, and other bioproducts with a great market value can be produced from wastewater and activated sludge (AS). This will not only help in the transition from a linear economy to a circular economy, but also contribute to sustainable development. However, the cost of recovering resources from wastewater and AS to produce value-added products is quite high as compared to conventional treatment methods. In addition, most antioxidant technologies remain at the laboratory scale that have not yet reached the level at industrial scale. In order to promote the innovation of resource recovery technology, the various methods of treating wastewater and AS to produce biofuels, nutrients and energy are reviewed, including biochemistry, thermochemistry and chemical stabilization. The limitations of wastewater and AS treatment methods are prospected from biochemical characteristics, economic and environmental factors. The biofuels derived from third generation feedstocks, such as wastewater are more sustainable. Microalgal biomass are being used to produce biodiesel, bioethanol, biohydrogen, biogas, biooils, bioplastics, biofertilizers, biochar and biopesticides. New technologies and policies can promote a circular economy based on biological materials.
Asunto(s)
Microalgas , Aguas Residuales , Aguas del Alcantarillado , Biocombustibles , BiomasaRESUMEN
This article provides an overview of biochar application for organic waste co-composting and its biochemical transformation mechanism. As a composting amendment, biochar work in the adsorption of nutrients, the retention of oxygen and water, and the promotion of electron transfer. These functions serve the micro-organisms (physical support of niche) and determine changes in community structure beyond the succession of composing primary microorganisms. Biochar mediates resistance genes, mobile gene elements, and biochemical metabolic activities of organic matter degrading. The participation of biochar enriched the α-diversity of microbial communities at all stages of composting, and ultimately reflects the high γ-diversity. Finally, easy and convincing biochar preparation methods and characteristic need to be explored, in turn, the mechanism of biochar on composting microbes at the microscopic level can be studied in depth.
Asunto(s)
Compostaje , Microbiota , Suelo , Carbón Orgánico , EstiércolRESUMEN
In this study, the effects of different treatments of the oat slurry on the nutritional, functional, and sensorial properties of oat milk were evaluated. The sprouting and sprouting-acidic treatments have the highest oat milk yield (91.70%) and protein extraction yield (82.74%), respectively. The protein concentrations of alkali, sprouting-acidic, and α-amylase-alkali treatments were significantly (p < .05) higher than other treatments. The alkali treatments showed higher fat content (0.66%). In addition, acidic and alkali treatments in single or combined with other treatments showed the highest dry matter and energy value. The carbohydrate content of α-amylase-alkali treatment (4.35%) was higher than other treatments and also, all acidic treatments showed higher ash content (>1) compared to the other treatments. Furthermore, the sprouting-α-amylase and acidic-α-amylase showed the lowest starch (0.28%) and the highest reducing sugar content (3.15%) compared to the other treatments, respectively. Moreover, the α-amylase-alkali treatment showed the highest total phenolic content and antioxidant activity (342.67 mg GAE/L and 183.08 mg BHT eq/L, respectively). Furthermore, sensory evaluation of most treatments showed acceptable scores (≥7) for consumers, especially in the case of α-amylase, sprouting, and α-amylase-sprouting treatments. Results show that the different treatments had different effects on the nutritional, functional, and sensorial properties of oat milk. In conclusion, from the nutritional and functional point of view, the two-stage treatments were more effective than singular treatments on investigated factors proposing their application in functional plant milk preparation.
RESUMEN
Environmental contamination is considered a major issue with the growing urbanization and industrialization. In this context, the scientific society is engaged in searching for a sustainable, safe, and eco-friendly solution. Sustainable materials such as biochar play an important role in environmental contamination. It has some specific properties such as micropores which increase the surface area to bind the pollutants. This review endeavors to analyze the potential of fruit wastes especially tropical fruit tree residues as potential candidates for producing highly efficient biochar materials. The review discusses various aspects of biochar production viz. pyrolysis, torrefaction, hydrothermal carbonization, and gasification. In addition, it discusses biochar use as an adsorbent, wastewater treatment, catalyst, energy storage, carbon sequestration and animal feed. The review put forward a critical discussion about key aspects of applying biochar to the environment.
Asunto(s)
Frutas , Árboles , Animales , Carbón Orgánico/química , Suelo/químicaRESUMEN
Since the first years of history, microbial fermentation products such as bread, wine, yogurt and vinegar have always been noteworthy regarding their nutritional and health effects. Similarly, mushrooms have been a valuable food product in point of both nutrition and medicine due to their rich chemical components. Alternatively, filamentous fungi, which can be easier to produce, play an active role in the synthesis of some bioactive compounds, which are also important for health, as well as being rich in protein content. Therefore, this review presents some important bioactive compounds (bioactive peptides, chitin/chitosan, ß-glucan, gamma-aminobutyric acid, L-carnitine, ergosterol and fructooligosaccharides) synthesized by fungal strains and their health benefits. In addition, potential probiotic- and prebiotic fungi were researched to determine their effects on gut microbiota. The current uses of fungal based bioactive compounds for cancer treatment were also discussed. The use of fungal strains in the food industry, especially to develop innovative food production, has been seen as promising microorganisms in obtaining healthy and nutritious food.
Fungal-based bioactive compounds have various health benefits.Prebiotic fungi play an active role in the regulation of gut microbiota.Anti-tumor effective fungal components will contribute to alternative medicine.Beta-glucan and chitin are the most promising fungal metabolites for cancer treatment.
RESUMEN
Filamentous fungi serve as potential candidates in the production of different value-added products. In the context of food, there are several advantages of using filamentous fungi for food. Among the main advantages is that the fungal biomass used food not only meets basic nutritional requirements but that it is also rich in protein, low in fat, and free of cholesterol. This speaks to the potential of filamentous fungi in the production of food that can substitute animal-derived protein sources such as meat. Moreover, life-cycle analyses and techno-economic analyses reveal that fungal proteins perform better than animal-derived proteins in terms of land use efficiency as well as global warming. The present article provides an overview of the potential of filamentous fungi as a source of food and food supplements. The commercialization potential as well as social, legal and safety issues of fungi-based food products are discussed.
Asunto(s)
Dieta Vegana , Hongos , Animales , Humanos , Suplementos Dietéticos , Proteínas Fúngicas/metabolismo , Hongos/metabolismo , Calentamiento GlobalRESUMEN
The inevitable need for waste valorisation and management has revolutionized the way in which the waste is visualised as a potential biorefinery for various product development rather than offensive trash. Biowaste has emerged as a potential feedstock to produce several value-added products. Bioenergy generation is one of the potential applications originating from the valorisation of biowaste. Bioenergy production requires analysis and optimization of various parameters such as biowaste composition and conversion potential to develop innovative and sustainable technologies for most effective utilization of biowaste with enhanced bioenergy production. In this context, feedstocks, such as food, agriculture, beverage, and municipal solid waste act as promising resources to produce renewable energy. Similarly, the concept of microbial fuel cells employing biowaste has clearly gained research focus in the past few decades. Despite of these potential benefits, the area of bioenergy generation still is in infancy and requires more interdisciplinary research to be sustainable alternatives. This review is aimed at analysing the bioconversion potential of biowaste to renewable energy. The possibility of valorising underutilized biowaste substrates is elaborately presented. In addition, the application and efficiency of microbial fuel cells in utilizing biowaste are described in detail taking into consideration of its great scope. Furthermore, the review addresses the significance bioreactor development for energy production along with major challenges and future prospects in bioenergy production. Based on this review it can be concluded that bioenergy production utilizing biowaste can clearly open new avenues in the field of waste valorisation and energy research. Systematic and strategic developments considering the techno economic feasibilities of this excellent energy generation process will make them a true sustainable alternative for conventional energy sources.
Asunto(s)
Residuos de Alimentos , Residuos Sólidos , Residuos Sólidos/análisis , Bioingeniería , Fuentes Generadoras de Energía , Reactores Biológicos , Biocombustibles/análisisRESUMEN
Tropical fruit wastes (TFW) are considered as the major source of food and nutrition in the topical countries. In the recent years, modernization of agriculture has increased the tropical fruit production. Higher fruit production led to an increasing abundance in the tropical fruit waste. In general, the tropical fruit waste has no economic value and ends up in landfill. But in recent years it was observed that the tropical fruit waste can be valorized to produce value-added products ranging from compost, phytochemicals, and food products to biofuels. The tropical fruit waste has great potential to produce useful products in tropical areas. This review literature is an endeavor to understand the major tropical fruit wastes and their composition. The review presents a detailed investigation on tropical fruit waste composition, its conversion potential, role of microbes in waste valorization, production of commercially valuable products and future perspectives in waste valorization.
Asunto(s)
Compostaje , Frutas , Frutas/química , Biocombustibles/análisis , Residuos/análisisRESUMEN
By utilizing their powerful metabolic versatility, filamentous fungi can be utilized in bioprocesses aimed at achieving circular economy. With the current digital transformation within the biomanufacturing sector, the interest of automating fungi-based systems has intensified. The purpose of this paper was therefore to review the potentials connected to the use of automation and artificial intelligence in fungi-based systems. Automation is characterized by the substitution of manual tasks with mechanized tools. Artificial intelligence is, on the other hand, a domain within computer science that aims at designing tools and machines with the capacity to execute functions that would usually require human aptitude. Process flexibility, enhanced data reliability and increased productivity are some of the benefits of integrating automation and artificial intelligence in fungi-based bioprocesses. One of the existing gaps that requires further investigation is the use of such data-based technologies in the production of food from fungi.
Asunto(s)
Inteligencia Artificial , Tecnología , Humanos , Reproducibilidad de los Resultados , Automatización , HongosRESUMEN
3-Hydroxypropionic acid (3-HP) and 1,3-propanediol (1,3-PDO) are value-added chemicals with versatile applications in the chemical, pharmaceutical, and food industries. Nevertheless, sustainable production of 3-HP and 1,3-PDO is often limited by the lack of efficient strains and suitable fermentation configurations. Herein, attempts have been made to improve the co-production of both metabolites through metabolic engineering of Escherichia coli and process optimization. First, the 3-HP and 1,3-PDO co-biosynthetic pathways were recruited and optimized in E. coli, followed by coupling the pathways to the transhydrogenase-mediated cofactor regeneration systems that increased cofactor availability and product synthesis. Next, pathway rebalancing and block of by-product formation significantly improved 3-HP and 1,3-PDO net titer. Subsequently, glycerol flux toward 3-HP and 1,3-PDO synthesis was maximized by removing metabolic repression and fine-tuning the glycerol oxidation pathway. Lastly, the combined fermentation process optimization and two-stage pH-controlled fed-batch fermentation co-produced 140.50 g/L 3-HP and 1,3-PDO, with 0.85 mol/mol net yield.