Estimation of time since deposition of semen stain on different fabric types using ATR-FTIR spectroscopy and chemometrics.

Various body fluids such as blood, semen, vaginal secretions, and saliva are frequently encountered at crime scene. In cases of sexual assault, semen stains are one of the most reliable evidence of biological origin. In this study, our objective was to develop a method for estimating the time since deposition of semen stains on five different fabric types using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) Spectroscopy, with a focus on a time frame of up to 8 weeks. Semen samples from six different volunteers were dripped onto five distinct fabric materials, and ATR-FTIR measurements were obtained at 17 different time points. Principal component analysis (PCA) and partial least squares (PLS) methods were employed to differentiate semen stains on various fabric samples and estimate the age of semen stains. Models constructed using PCA and PLSR achieved high R2 values and low root-mean-square error (RMSE). While the performance varies depending on fabric types, it was observed that age estimation of semen stains can be made within following intervals: 0.39-0.76 days for 0-7 day range, 2.59-3.38 days for the 1-8 week range, and 3.98-8.1 days for the 0-56 day range. This study demonstrates the effectiveness of using ATR-FTIR spectroscopy in combination with chemometrics to estimate the age of human semen stains on various fabric types based on time-dependent spectral changes.

Principles, Methods, and Real-Time Applications of Bacteriophage-Based Pathogen Detection.

Bacterial pathogens in water, food, and the environment are spreading diseases around the world. According to a World Health Organization (WHO) report, waterborne pathogens pose the most significant global health risks to living organisms, including humans and animals. Conventional bacterial detection approaches such as colony counting, microscopic analysis, biochemical analysis, and molecular analysis are expensive, time-consuming, less sensitive, and require a pre-enrichment step. However, the bacteriophage-based detection of pathogenic bacteria is a robust approach that utilizes bacteriophages, which are viruses that specifically target and infect bacteria, for rapid and accurate detection of targets. This review shed light on cutting-edge technologies about the novel structure of phages and the immobilization process on the surface of electrodes to detect targeted bacterial cells. Similarly, the purpose of this study was to provide a comprehensive assessment of bacteriophage-based biosensors utilized for pathogen detection, as well as their trends, outcomes, and problems. This review article summaries current phage-based pathogen detection strategies for the development of low-cost lab-on-chip (LOC) and point-of-care (POC) devices using electrochemical and optical methods such as surface-enhanced Raman spectroscopy (SERS).

Platform-agnostic electrochemical sensing app and companion potentiostat.

Electrochemical sensing is ubiquitous in a number of fields ranging from biosensing, to environmental monitoring through to food safety and battery or corrosion characterisation. Whereas conventional potentiostats are ideal to develop assays in laboratory settings, they are in general, not well-suited for field work due to their size and power requirements. To address this need, a number of portable battery-operated potentiostats have been proposed over the years. However, most open source solutions do not take full advantage of integrated circuit (IC) potentiostats, a rapidly evolving field. This is partly due to the constraining requirements inherent to the development of dedicated interfaces, such as apps, to address and control a set of common electrochemical sensing parameters. Here we propose the PocketEC, a universal app that has all the functionalities to interface with potentiostat ICs through a user defined property file. The versatility of PocketEC, developed with an assay developer mindset, was demonstrated by interfacing it, via Bluetooth, to the ADuCM355 evaluation board, the open-source DStat potentiostat and the Voyager board, a custom-built, small footprint potentiostat based around the LMP91000 chip. The Voyager board is presented here for the first time. Data obtained using a standard redox probe, Ferrocene Carboxylic Acid (FCA) and a silver ion assay using anodic stripping multi-step amperometry were in good agreement with analogous measurements using a bench top potentiostat. Combined with its Voyager board companion, the PocketEC app can be used directly for a number of wearable or portable electrochemical sensing applications. Importantly, the versatility of the app makes it a candidate of choice for the development of future portable potentiostats. Finally, the app is available to download on the Google Play store and the source codes and design files for the PocketEC app and the Voyager board are shared via Creative Commons license (CC BY-NC 3.0) to promote the development of novel portable or wearable applications based on electrochemical sensing.

The effect of silencing the Tip60 gene on the response to radiotherapy in breast cancer cells.

Since patients with triple-negative breast cancer do not respond to hormone therapy, the main treatment method is the combination of chemotherapy and radiotherapy. Because the DNA of the tumor cell is the target in both some chemotherapeutics and radiotherapy, problems may occur in individuals with a high DNA repair pathway. It is suggested that high expression of the Tip60 gene, which has an important role in repairing DNA damage, will increase the repair of DNA double-strand breaks in tumor cells, especially during radiotherapy treatment, thus reducing the response to treatment and adversely affecting treatment. In this study, for the first time, the role of the silenced and active Tip60 gene in response to radiotherapy in MDA-MB-231 and MCF-7 cells was investigated. For this purpose, the Tip60 gene was silenced by applying siRNA to the cell lines and UV was applied. In the study, cytotoxicity and DNA breaks were measured by MTT and COMET methods, and mRNA and protein expression values were measured by PCR and Raman spectrophotometer in silenced, unsilenced, UV-treated, and non-UV-treated cell lines. According to the results of the study, increased DNA damage was observed in MCF-7 cell lines in which the Tip60 gene was silenced, and radiotherapy was applied, compared to the cell lines with the Tip60 gene active. It was observed that DNA damage in MDA-MB-231 cell lines was less than in cell lines with the active Tip60 gene.

Microfluidic-based blood immunoassays.

Microfluidics enables the integration of whole protocols performed in a laboratory, including sample loading, reaction, extraction, and measurement steps on a single system, which offers significant advantages thanks to small-scale operation combined with precise fluid control. These include providing efficient transportation mechanisms and immobilization, reduced sample and reagent volumes, fast analysis and response times, lower power requirements, lower cost and disposability, improved portability and sensitivity, and greater integration and automation capability. Immunoassay is a specific bioanalytical method based on the interaction of antigens and antibodies, which is utilized to detect bacteria, viruses, proteins, and small molecules in several areas such as biopharmaceutical analysis, environmental analysis, food safety, and clinical diagnostics. Because of the advantages of both techniques, the combination of immunoassays and microfluidic technology is considered one of the most potential biosensor systems for blood samples. This review presents the current progress and important developments in microfluidic-based blood immunoassays. After providing several basic information about blood analysis, immunoassays, and microfluidics, the review points out in-depth information about microfluidic platforms, detection techniques, and commercial microfluidic blood immunoassay platforms. In conclusion, some thoughts and future perspectives are provided.

Overcoming obstacles: Analysis of blood and semen stains washed with different chemicals with ATR-FTIR.

INTRODUCTION: Blood and semen stains are the most common biological stains encountered at crime scenes. The washing of biological stains is a common application that perpetrators use to spoil the crime scene. With a structured experiment approach, this study aims to investigate the effects of washing with various chemicals on the ATR-FTIR detection of blood and semen stains on cotton. MATERIALS AND METHODS: On cotton pieces, a total of 78 blood and 78 semen stains were applied, and each group of six stains was immersed or mechanically cleaned in water, 40% methanol, 5% sodium hypochlorite solution, 5% hypochlorous acid solution, 5 g/L soap dissolved pure water, and 5 g/L dishwashing detergent dissolved water. ATR-FTIR spectra gathered from all stains and analyzed with chemometric tools. RESULTS AND DISCUSSION: According to performance parameters of developed models, PLS-DA is a powerful tool for discrimination of washing chemical for both washed blood and semen stains. Results from this study show that FTIR is promising for use in detecting blood and semen stains that have become invisible to the naked eye due to washing of the findings. CONCLUSION: Our approach allows blood and semen to be detected on cotton pieces using FTIR combined with chemometrics, even though it is not visible to the naked eye. Washing chemicals also can be distinguished via FTIR spectra of stains.

An ECL sensor combined with a paper electrode for the determination of phenylalanine.

Herein, a unique electrochemiluminescence (ECL) sensor combined with a paper electrode was proposed for the detection of phenylalanine (L-Phe) in blood samples. The L-Phe detection was performed by converting L-Phe into ammonia using phenylalanine ammonia-lyase (PAL) enzyme and the ECL signal of Ru(bpy)32+ was produced in combination with ammonia as a co-reactant. In this report, we used AuNP decorated paper electrodes to obtain the ECL signal of Ru-(bpy)32+ in the presence of NH3. The produced ammonia molecules were carried to the working electrode and their contact with the sample was cut off. Since there was no contact between the sample matrix and the electrode, the developed method achieved excellent selectivity. According to experimental data, a linear increase of the ECL signals with the logarithms of varying L-Phe concentrations between 1.5 × 10-2 and 1.211 mM was observed with a correlation coefficient (R2) of 0.9898 and a limit of detection (LOD) of 8.4 × 10-3 mM. The proposed method was efficiently applied for L-Phe detection in reference blood samples and the average recovery was calculated as 96.8%. Furthermore, the HPLC-UV method as a comparison verified that the recovery values provided by the proposed method were acceptable with a similarity of 95.1% for L-Phe detection in a reference blood sample. The results showed that the developed ECL sensor combined with the paper electrode can be considered as a promising unique and powerful technique for a point-of-care diagnosis of PKU.

Effect of different molecular weight and terminal group PLGA on docetaxel nanoparticles: characterization and cytotoxic activity of castration-resistant prostate cancer cells.

The choice of polymer and its compatibility with drug used determine the fate of nanoparticle in therapy. There has been limited sources about effect of resomer differentiation in nanoparticle related with physical and chemical properties and also biological activities of product. Therefore, we aimed to formulate docetaxel-loaded polylactic-co-glycolic acid nanoparticles with different molecular weights (Resomer 502 and 504) and terminal groups (Resomer 502H and 504H) and to investigate the effect of these resomers on nanoparticle character, prostate cancer, and healthy cells. Docetaxel-loaded PLGA nanoparticles were prepared by single emulsion solvent evaporation method. Surface characterizations were carried out by zeta sizer and scanning electron microscopy. Encapsulation efficiency, in vitro drug release profiles, and cytotoxic activity were determined. Main effect on the surface morphology of nanoparticles was the molecular weight of the polymer. The groups with acid terminal function have higher encapsulation and reaction efficiency. In all formulations, in vitro release was observed after 334 h at pH 7.4 and 240 h at pH 5.6. Also, the groups with high molecular weight showed selective cytotoxicity. These resomers especially RG 504 and RG 504H have potential to be used as a low-dose and high-efficiency extended-release drug delivery system in the treatment of prostate cancer.

Escherichia coli Enumeration in a Capillary-Driven Microfluidic Chip with SERS.

Pathogen detection is still a challenging issue for public health, especially in food products. A selective preconcentration step is also necessary if the target pathogen concentration is very low or if the sample volume is limited in the analysis. Plate counting (24-48 h) methods should be replaced by novel biosensor systems as an alternative reliable pathogen detection technique. The usage of a capillary-driven microfluidic chip is an alternative method for pathogen detection, with the combination of surface-enhanced Raman scattering (SERS) measurements. Here, we constructed microchambers with capillary microchannels to provide nanoparticle-pathogen transportation from one chamber to the other. Escherichia coli (E. coli) was selected as a model pathogen and specific antibody-modified magnetic nanoparticles (MNPs) as a capture probe in a complex milk matrix. MNPs that captured E. coli were transferred in a capillary-driven microfluidic chip consisting of four chambers, and 4-aminothiophenol (4-ATP)-labelled gold nanorods (Au NRs) were used as the Raman probe in the capillary-driven microfluidic chip. The MNPs provided immunomagnetic (IMS) separation and preconcentration of analytes from the sample matrix and then, 4-ATP-labelled Au NRs provided an SERS response by forming sandwich immunoassay structures in the last chamber of the capillary-driven microfluidic chip. The developed SERS-based method could detect 101-107 cfu/mL of E. coli with the total analysis time of less than 60 min. Selectivity of the developed method was also tested by using Salmonella enteritidis (S. enteritidis) and Staphylococcus aureus (S. aureus) as analytes, and very weak signals were observed.

Magneto-Immunoassay for the Detection and Quantification of Human Growth Hormone.

Physiological and endocrine maintenance of a normal human growth hormone (hGH) concentration is crucial for growth, development, and a number of essential biological processes. In this study, we describe the preparation and characterization of magnetic nanoparticles coated with a gold shell (MNPs-Au). The optimal surface concentration of monoclonal anti-hGH antibodies (m-anti-hGH) on magnetic nanoparticles, as well as conditions that decrease non-specific interactions during the magneto-immunoassay, were elaborated. After the selective recognition, separation, and pre-concentration of hGH by MNPs-Au/m-anti-hGH and the hGH interaction with specific polyclonal biotin-labeled antibodies (p-anti-hHG-B) and streptavidin modified horseradish peroxidase (S-HRP), the MNPs-Au/m-anti-hGH/hGH/p-anti-hGH-B/S-HRP immunoconjugate was formed. The concentration of hGH was determined after the addition of 3,3',5,5'-tetramethylbenzidine and hydrogen peroxide substrate solution for HRP; the absorbance at 450 nm was registered after the addition of STOP solution. The developed sandwich-type colorimetric magneto-immunoassay is characterized by a clinically relevant linear range (from 0.1 to 5.0 nmol L-1, R2 0.9831), low limit of detection (0.082 nmol L-1), and negligible non-specific binding of other antibodies or S-HRP. The obtained results demonstrate the applicability of the developed magneto-immunoassay for the concentration and determination of hGH in the serum. Additionally, important technical solutions for the development of the sandwich-type colorimetric magneto-immunoassay are discussed.

A fluorescent biosensor based on quantum dot-labeled streptavidin and poly-l-lysine for the rapid detection of Salmonella in milk.

Salmonella, as a common foodborne pathogen in dairy products, poses a great threat to human health. We studied a new detection method based on quantum dots (QD). A fluorescent biosensor with multiple fluorescent signal amplification based on a streptavidin (SA) biotin system and the polyamino linear polymer poly-l-lysine (PLL) were established to detect Salmonella in milk. First, Salmonella was captured on a black 96-well plate with paired Salmonella mAb to form a double-antibody sandwich. Second, SA was immobilized on biotin-modified mAb by SA-biotin specific bond. Then, the biotin-modified polylysine (BT-PLL) was bound on SA and specifically bonded again through the SA-biotin system. Finally, water-soluble CdSe/ZnS QD-labeled SA was added to a black 96-well plate for covalent coupling with BT-PLL. The fluorescent signal was amplified in a dendritic manner by the layer-by-layer overlap of SA and biotin and the covalent coupling of biotinylated PLL. Under optimal conditions, the detection limit was 4.9 × 103 cfu/mL in PBS. The detection limit was 10 times better than that of the conventional sandwich ELISA. In addition, the proposed biosensor was well specific and could be used for detecting Salmonella in milk samples.

Impedimetric detection of miRNA biomarkers using paper-based electrodes modified with bulk crystals or nanosheets of molybdenum disulfide.

Paper-based electrodes modified with molybdenum disulfide (MoS2) in the form of bulk crystals or exfoliated nanosheets were developed and used as a biosensing platform for the impedimetric detection of miRNAs (miRNA-155 and miRNA-21) related to early diagnosis of lung cancer. For this purpose, MoS2 crystals or nanosheets were used for the modification of the working electrode area of paper-based platform for the first time in this study. The proposed assay offers sensitive and selective detection of microRNAs by electrochemical impedance spectroscopy (EIS) technique. The entire assay, both the electrode modification and the miRNA detection being completed in 30 min and a single sample droplet (5 µL) was enough to cover working electrode area which enabled analysis in low sample volumes. The limits of detection (LOD) for miRNA-21 and miRNA-155 were calculated both in buffer and fetal bovine serum media. It is found that the LOD is varying between 1 and 200 ng/mL. In comparison to nanosheets, a larger electroactive surface area was obtained with bulk MoS2 resulting in lower LOD values on miRNA detection. The paper-based electrodes showed high specificity towards their target sequences. Moreover, they effectively discriminated single base mismatched non-target sequences. The advantages of these MoS2 paper based electrodes include high sensitivity, and low-cost provide great potential for improved monitoring of miRNA biomarkers even in artificial serum media.

Surface-enhanced Raman scattering-based detection of plasmin activity by specific peptide substrate.

In this study, a new surface-enhanced Raman scattering (SERS)-based method has been developed for the detection of plasmin activity. Firstly, different peptide sequences, which are specific to plasmin, were examined. Then, SERS substrates were prepared by chosen peptide substrate. Enzyme activity was determined by pursuing the reduction of DTNB band at 1331 cm-1 with Raman spectroscopy. The reduction in SERS intensity was related to the plasmin activity, and changes in SERS intensity vs. plasmin concentration graph was obtained. Limit of detection (LOD) and limit of quantification (LOQ) values were calculated as 2.14 U/mL and 6.42 U/mL, respectively. Intra- and inter-day repeatability results were determined as 1.45% and 1.47% relative standard deviation (RSD). Also, recovery of the method was determined for the plasmin spiked milk samples. The results demonstrated that the proposed method could be successfully used to detect the plasmin activity in milk samples.

A capillary driven microfluidic chip for SERS based hCG detection.

In this study, a capillary driven microfluidic chip-based immunoassay was developed for the determination of Human Chorionic Gonadotropin (hCG) protein, which is prohibited by the World Anti-Doping Agency (WADA). Here, we used antibody modified magnetic metal organic framework nanoparticles (MMOFs) as a capture prob in urine sample. MMOF captured hCG was transferred in a capillary driven microfluidic chip consisting of four chambers, and the interaction of MMOF with gold nanorods labelled with 5,5'-Dithiobis-(2-nitrobenzoic acid) (DTNB) as a Raman label was carried out in the capillary driven microfluidic chip. The movement of MMOF through first chamber to the last chamber was achieved with a simple magnet. In the last chamber of capillary driven microfluidic chip, SERS signals of DTNB molecules from the sandwich complex were recorded using a Raman spectrophotometer. The selectivity of the developed method was demonstrated by applying the same procedure for the detection of Human Luteinizing Hormone (hLH), Human Chorionic Gonadotropin Hormone (hGH) and Immunoglobulin G (IgG) protein. The regression coefficient and limit of detection obtained from the standard addition method were found as 0,9985 and 0,61 IU/L, respectively. Furthermore, the conventional ELISA method confirmed that the results obtained by the presented method were acceptable with the similarity of 97.9% in terms of average recovery value, for the detection of hCG in urine samples. The analysis system developed for target proteins will be an alternative technique such as Western Blot used in routine analysis that is expensive and time consuming.

Construction of a sensitive and selective plasmonic biosensor for prostate specific antigen by combining magnetic molecularly-imprinted polymer and surface-enhanced Raman spectroscopy.

Selective and sensitive detection of cancer biomarkers in serum samples is critical for early diagnosis of cancer. Prostate specific antigen is an important biomarker of prostate cancer, which ranks high among cancer-related deaths of men over 50 years old. Herein, a novel analytical method was introduced for detection of PSA by combining high selectivity of molecularly-imprinted polymers and high sensitivity of surface-enhanced Raman spectroscopy (SERS). Firstly, magnetic nanoparticles were grafted with an imprinted layer by using tannic acid as a functional monomer, diethylenetriamine as a cross-linker and prostate specific antigen as a template molecule. Detailed surface characterization and re-binding experiment results indicated that the imprinting of the antigen was successful with an imprinting factor of 5.58. The prepared magnetic molecularly imprinted polymers (MMIPs) were used as an antibody-free capture probe and labeled with gold nanoparticles that were modified with anti-PSA and a Raman reporter, namely 5,5'-dithiobis-(2-nitrobenzoic acid). Thus, a plasmonic structure (sandwich complex) was formed between MMIP and the SERS label. The limit of detection and limit of quantification of the designed sensor were 0.9 pg/mL and 3.2 pg/mL, respectively. The sensor also showed high recovery rates (98.0-100.1% for healthy person and 99.0-101.3% for patient) with low standard deviations (less than 4.3% for healthy person and less than 3.3% for patient) for PSA in serum samples. Compared with the traditional immunoassays, the proposed method has several advantages like low cost, reduced detection procedure, fast response, high sensitivity and selectivity. It is believed that the proposed method can be potentially used for selective and sensitive determination of tumor marker of prostate cancer in clinical applications.

Paper-Based Electrochemical Biosensors for Voltammetric Detection of miRNA Biomarkers Using Reduced Graphene Oxide or MoS2 Nanosheets Decorated with Gold Nanoparticle Electrodes.

Paper-based biosensors are considered simple and cost-efficient sensing platforms for analytical tests and diagnostics. Here, a paper-based electrochemical biosensor was developed for the rapid and sensitive detection of microRNAs (miRNA-155 and miRNA-21) related to early diagnosis of lung cancer. Hydrophobic barriers to creating electrode areas were manufactured by wax printing, whereas a three-electrode system was fabricated by a simple stencil approach. A carbon-based working electrode was modified using either reduced graphene oxide or molybdenum disulfide nanosheets modified with gold nanoparticle (AuNPs/RGO, AuNPs/MoS2) hybrid structures. The resulting paper-based biosensors offered sensitive detection of miRNA-155 and miRNA-21 by differential pulse voltammetry (DPV) in only 5.0 µL sample. The duration in our assay from the point of electrode modification to the final detection of miRNA was completed within only 35 min. The detection limits for miRNA-21 and miRNA-155 were found to be 12.0 and 25.7 nM for AuNPs/RGO and 51.6 and 59.6 nM for AuNPs/MoS2 sensors in the case of perfectly matched probe-target hybrids. These biosensors were found to be selective enough to distinguish the target miRNA in the presence of single-base mismatch miRNA or noncomplementary miRNA sequences.

Replacement of antibodies with bacteriophages in lateral flow assay of Salmonella Enteritidis.

In this study, the analytical performance of bacteriophages for Salmonella Enteritidis was investigated using lateral flow assay (LFA) technique. The analytical performance characteristics of bacteriophages were compared with antibodies which are regularly used as analyte-specific agents in the lateral flow immunoassay test strip. Bacteriophages could be an alternative analyte-specific agents to antibodies in lateral flow assay testing of bacteria since they offer comparable sensitivity, specificity, and accuracy. In the present study, Surface Enhanced Raman Spectroscopy (SERS) and colorimetric measurements were combined in one platform and sensitive quantitation of target bacteria was accomplished with a total quantitative analysis time of less than 30 min. The developed Salmonella Enteritidis F5-4 phage-based LFA specifically responds to Salmonella Enteritidis, while lower SERS responses to different bacteria types including Bacillus subtilis, Micrococcus luteus, Escherichia coli, Salmonella Typhimurium were observed. The developed test strips were also applied for the determination of Salmonella Enteritidis in spiked chicken and egg samples.

Paper-based electrode assemble for impedimetric detection of miRNA.

In the present work, a paper-based electrode assemble was developed and implemented to detect target microRNA 155 (miRNA 155) via electrochemical impedance spectroscopy (EIS) measurements. In this concept, gold nanoparticles (AuNPs) modified paper based electrode assemble system (AuNP-PE) was designed, and characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and EIS measurements. The impedimetric detection of miRNA 155 was performed by measuring the fractional change at the charge transfer resistance (Rct). The detection limits were found as 33.8 nM in PBS and 93.4 nM in fetal bovine serum (FBS) medium, respectively. The selectivity of the proposed assay was tested against to non-complementary (NC) and mismatch (MM) miRNA sequences in the presence of mixture sample containing miRNA:NC (1:1) and miRNA:MM (1:1) in PBS (pH 7.40) or FBS. The analytical performance and the selectivity of impedimetric biosensor were also tested in FBS.

A disposable gold-cellulose nanofibril platform for SERS mapping.

In this study, we present a disposable and inexpensive paper-like gold nanoparticle-embedded cellulose nanofibril substrate for the rapid enumeration of Escherichia coli (E. coli) using surface-enhanced Raman scattering (SERS) mapping. A disposable SERS substrate was simply constructed by mixing CNF and gold chloride solution at 120 °C in a water bath. The application of the resulting substrate was carried out by enrichment and SERS detection of E. coli. To this end, the spherical gold nanoparticle-embedded cellulose nanofibril substrate was used as a scavenger for E. coli. After the target bacteria E. coli were separated from the matrix via oriented antibodies, the sandwich assay procedure was carried out using 5,5-dithiobis-(2-nitrobenzoic acid) (DTNB)-coated Au nanorod particles that acted as SERS mapping probes. The distribution density of DTNB was demonstrated visually using SERS mapping, and the assay was completed in one hour. The correlation between the E. coli and SERS mapping signals was found to be linear within the range of 15 cfu mL-1 to 1.5 × 105 cfu mL-1. The limit of detection for the SERS mapping assay was determined to be 2 cfu mL-1. The selectivity of the developed method was examined with Micrococcus luteus (M. luteus), Bacillus subtilis (B. subtilis), and Enterobacter aerogenes (E. aerogenes), which did not produce any significant response. Furthermore, the developed method was evaluated for detecting E. coli in artificially contaminated samples, and the results were compared with those of the plate-counting method.

Multiplex enumeration of Escherichia coli and Salmonella enteritidis in a passive capillary microfluidic chip.

Multiplex detection and quantification of bacteria in water by using portable devices are particularly essential in low and middle-income countries where access to clean drinking water is limited. Addressing this crucial problem, we report a highly sensitive immunoassay sensor system utilizing the fluorescence technique with magnetic nanoparticles (MNPs) to separate target bacteria and two different types of quantum dots (CdTe and Ni doped CdTe QDs) incorporated into a passive microfluidic chip to transport and to form sandwich complexes for the detection of two target bacteria, namely Escherichia coli (E. coli) and Salmonella enteritidis (S. enteritidis) in less than 60 min. The assay is carried out on a capillary driven microfluidic chip that can be operated by merely pipetting the samples and reagents, and fluorescence measurements are done by using a handheld fluorescence spectrophotometer, which renders the system portable. The linear range of the method was found to be 101 to 105 cfu mL-1 for both E. coli and S. enteritidis. The limit of detection (LOD) was calculated to be 5 and 3 cfu mL-1 for E. coli and S. enteritidis, respectively. The selectivity of the method was examined by testing Enterobacter dissolvens (E. dissolvens) and Staphylococcus aureus (S. aureus) samples, and no significant interference was observed. The method was also demonstrated to detect bacteria in tap water and lake water samples spiked with target bacteria.