RESUMEN
Macroporous niobium-doped tin oxide (NTO) is introduced as a robust alternative to conventional carbon-based catalyst supports to improve the durability and performance of polymer electrolyte fuel cells (PEFCs). Metal oxides like NTO are more stable than carbon under PEFC operational conditions, but they can compromise gas diffusion and water management because of their denser structures. To address this tradeoff, we synthesized macroporous NTO particles using a flame-assisted spray-drying technique employing poly(methyl methacrylate) as a templating agent. X-ray diffraction analysis and scanning electron microscopy confirmed the preservation of crystallinity and revealed a macroporous morphology with larger pore volumes and diameters than those in flame-made NTO nanoparticles, as revealed by mercury porosimetry. The macroporous NTO particles exhibited enhanced maximum current density and reduced gas diffusion resistance relative to commercial carbon supports. Our findings establish a foundation for integrating macroporous NTO structures into PEFCs to optimize durability and performance.
RESUMEN
A commercial X-ray computed tomography (CT) apparatus using a quasi-monochromatic beam was utilized for density estimations and comparisons of a fragmented single fiber. The validation of quasi-monochromaticity of the X-ray source was investigated by radiograph measurements. For the case of a transmittance higher than 50%, the contribution of Cu Kα characteristic X-rays was dominant. To realize a sufficient statistical quality, an attempt to increase the number of averaged voxels was demonstrated using the neighboring slices of the 3D-CT image. A minimum value of the coefficient of variation (CV) was achieved using multiple images rather than using a single image. The observed values of the inverse of the transmitted X-ray intensity (CT value) of the polymers showed a fairly good relationship with their density. An analytical curve derived from measurements of reference samples of known densities could provide the relative density of an unknown fragmented fiber down to the size of 30 µm in diameter and 35 µm in length. The CV of the estimated density was from 1.5 to 2%, which was estimated from the CV of CT values. Moreover, the correlation of CT values was improved with the linear absorption coefficient than the density. A better performance of discrimination of polymers including fibers might be realized with the difference of linear absorption coefficients for X-rays.
RESUMEN
A commercial high-resolution X-ray computed tomography (CT) was utilized for non-destructive analysis of single fibers. The micro-CT apparatus was employed because it is applicable to both colored and colorless fibers. A sample preparation using adhesive sheets was demonstrated, and the method is similar to typical tape-lift sample collection method in crime cases. Different cross-sectional shapes of nylon and polyester single fibers were non-destructively distinguished, and the method is applicable to all types of fibers. Cross-sectional areas, aperture ratios, and volumes of individual fibers were directly and automatically measured using the open-source software. The observed parameters were within a coefficient of variation of 3%. In addition, a mass of a single fragment of a fiber can be estimated when the local density is given.
Asunto(s)
Adhesivos , Tomografía Computarizada por Rayos X , Programas Informáticos , Tomografía Computarizada por Rayos X/métodosRESUMEN
There has been much interest in developing protein adsorbents using nanostructured particles, which can be engineered porous materials with fine control of the surface and pore structures. A significant challenge in designing porous adsorbents is the high percentage of available binding sites in the pores owing to their large surface areas and interconnected pore networks. In this study, continuing the idea of using porous materials derived from natural polymers toward the goal of sustainable development, porous pectin particles are reported. The template-assisted spray drying method using calcium carbonate (CaCO3) as a template for pore formation was applied to prepare porous pectin particles. The specific surface area was controlled from 177.0 to 222.3 m2 g-1 by adjusting the CaCO3 concentration. In addition, the effects of a macroporous structure, the specific surface area, and an interconnected pore network on the protein (lysozyme) adsorption capacity and adsorption mechanism were investigated. All porous pectin particles performed rapid adsorption (â¼65% total capacity within 5 min) and high adsorption capacity, increasing from 1543 to the highest value of 2621 mg g-1. The results are attributed to the high percentage of available binding sites located in the macropores owing to their large surface areas and interconnected pore networks. The macroporous particles obtained in this study showed a higher adsorption capacity (2621 mg g-1) for lysozyme than other adsorbents. Moreover, the rapid uptake and high performance of this material show its potential as an advanced adsorbent for various macromolecules in the food and pharmaceutical fields.
Asunto(s)
Pectinas , Proteínas , Adsorción , Polímeros , PorosidadRESUMEN
Non-destructive observations of cross-sectional shapes of acrylic single fibers using X-ray computed tomography (CT) were performed. A commercial X-ray CT apparatus (Rigaku nano3DX) was employed because of its micrometer-scale spatial resolution and remarkable image contrast for soft matter. We assessed two types of sample support, a paraffin strip and a nylon string, for single fiber samples in terms of easy handling and sample recovery. Fixed individual single fibers were loaded into a narrow polyimide tube in both cases, and the tube ensured that the sample remained in the field of view during the CT measurements. In both cases, the cross-sectional shapes of individual single fibers could be distinguished, with a circular shape for one sample and a triangular shape for the other. However, the support using a nylon string was found to be more suitable for further analysis. The cross-sectional profile of the obtained tomographic image showed a clear difference between polyimide and nylon. The intensity ratio or the image contrast corresponded to that of the local densities. It was also found that the effect of the artifact appeared at around the boundaries of the objects, but the local density could still be utilized for examining individual single fibers.
RESUMEN
Gold-silica (Au-SiO2) nanohybrids are of great technological importance, and it is crucial to develop facile synthetic protocols to prepare Au-SiO2 nanohybrids with novel structures. Here we report the bioinspired synthesis of pomegranate-like SiO2@Au nanoparticles (P-SiO2@Au NPs) via one-step aqueous synthesis from chloroauric acid and tetraethyl orthosilicate mediated by a basic amino acid, arginine. Effects of chloroauric acid, tetraethyl orthosilicate, and arginine on the morphology and optical property of the products are investigated in detail. The P-SiO2@Au NPs achieve tunable plasmon resonance depending on the amount of chloroauric acid, which affects the size and shape of the P-SiO2@Au NPs. Finite-difference time-domain simulations are performed, revealing that the plasmon peak red-shifts with increasing particle size. Arginine serves as the reducing and capping agents for Au as well as the catalyst for SiO2 formation and also promotes the combination of Au and SiO2. Formation process of the P-SiO2@Au NPs is clarified through time-course analysis. The P-SiO2@Au NPs show good sensitivity for both colloidal and paper-based surface-enhanced Raman scattering measurements. They achieve enhancement factors of 4.3 × 107-8.5 × 107 and a mass detection limit of ca. 1 ng using thiophenol as the model analyte.
RESUMEN
Adsorption performance in the biosorption of tungsten using Escherichia coli cells can be significantly improved by using cell suspensions that have been heat-treated at ⩽100°C. In the case of E. coli cells suspension heated at 100°C, the aqueous tungsten ions concentration rapidly decreased from 0.8mmol/L to practically zero within 1h. This biosorption time is much shorter than that of non-heat treated E. coli cells (7h). Furthermore, the adsorption saturation amount for cells heat-treated at 100°C was significantly increased up to 1.62mmol-W/g-E. coli compared to the unheated E. coli cells case (0.62mmol-W/g-E. coli). Determination of the surface potential and surface structure along with quantitative analyses of free amino acids of heat-treated E. coli cells were also carried out and revealed that heated cells have a high zeta potential and express a higher concentration of amino acids on the cell surface.
Asunto(s)
Escherichia coli/química , Tungsteno/química , Adsorción , Calefacción , Microscopía Electrónica de Rastreo , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Agua/químicaRESUMEN
Pd cathode catalysts for polymer electrolyte fuel cells have been covered with silica layers a few nanometres thick. The silica-coated Pd catalysts showed high activity and excellent durability for the oxygen reduction under the severe cathode conditions of PEFCs, while Pd catalysts without silica-coating were seriously deactivated under the same conditions. The coverage of Pd metal with silica prevents the diffusion of Pd species out of the silica layers.
RESUMEN
Tablets containing both paracetamol (PM) and cloperastine hydrochloride (CLH) in a combination formulation prepared by standard vertical granulation technology were found to have altered pharmaceutical properties. The hardness and disintegration time of tablets containing both PM and CLH gradually increased during storage, and the cross-screw did not operate smoothly during preparation of the mixed powder. The objective of the present study was to investigate the mechanism of formation of eutectic mixtures consisting of PM and CLH. Binary mixtures of PM and CLH in various proportions were prepared as physical mixtures and analyzed by DSC to study their thermal behavior. Phase diagrams obtained from the endothermic peaks due to melting of physical mixtures of PM and CLH demonstrated the formation of eutectic mixtures with eutectic temperatures of 86.9-110.2 degrees C depending on the ratio of constituents. The formation of the eutectic mixture was studied for a 50:50 mol.% ratio of PM and CLH. PXRD analysis revealed that the eutectic mixture of PM and CLH is structurally different from native PM and CLH. The most probable interaction sites between PM and CLH were demonstrated by DSC analysis of a binary mixture of PM and CLH prepared by melt quenching.