A method for detecting ureteral stent encrustations in medical CT images based on Mask-RCNN and 3D morphological analysis.

Objective: To develop and validate a method for detecting ureteral stent encrustations in medical CT images based on Mask-RCNN and 3D morphological analysis. Method: All 222 cases of ureteral stent data were obtained from the Fifth Affiliated Hospital of Sun Yat-sen University. Firstly, a neural network was used to detect the region of the ureteral stent, and the results of the coarse detection were completed and connected domain filtered based on the continuity of the ureteral stent in 3D space to obtain a 3D segmentation result. Secondly, the segmentation results were analyzed and detected based on the 3D morphology, and the centerline was obtained through thinning the 3D image, fitting and deriving the ureteral stent, and obtaining radial sections. Finally, the abnormal areas of the radial section were detected through polar coordinate transformation to detect the encrustation area of the ureteral stent. Results: For the detection of ureteral stent encrustations in the ureter, the algorithm's confusion matrix achieved an accuracy of 79.6% in the validation of residual stones/ureteral stent encrustations at 186 locations. Ultimately, the algorithm was validated in 222 cases, achieving a ureteral stent segmentation accuracy of 94.4% and a positive and negative judgment accuracy of 87.3%. The average detection time per case was 12 s. Conclusion: The proposed medical CT image ureteral stent wall stone detection method based on Mask-RCNN and 3D morphological analysis can effectively assist clinical doctors in diagnosing ureteral stent encrustations.

Molecular and spatial signatures of human and rat corpus cavernosum physiopathological processes at single-cell resolution.

The composition and cellular heterogeneity of the corpus cavernosum (CC) microenvironment have been characterized, but the spatial heterogeneity at the molecular level remains unexplored. In this study, we integrate single-cell RNA sequencing (scRNA-seq) and spatial transcriptome sequencing to comprehensively chart the spatial cellular landscape of the human and rat CC under normal and disease conditions. We observe differences in the proportions of cell subtypes and marker genes between humans and rats. Based on the analysis of the fibroblast (FB) niche, we also find that the enrichment scores of mechanical force signaling vary across different regions and correlate with the spatial distribution of FB subtypes. In vitro, the soft and hard extracellular matrix (ECM) induces the differentiation of FBs into apolipoprotein (APO)+ FBs and cartilage oligomeric matrix protein (COMP)+ FBs, respectively. In summary, our study provides a cross-species and physiopathological transcriptomic atlas of the CC, contributing to a further understanding of the molecular anatomy and regulation of penile erection.

Dimension compensation of printed master molds by a desktop LCD 3D printer for high-precision microfluidic applications.

Recent advances in low-cost liquid crystal display (LCD) 3D printing have popularized its use in creating microfluidic master molds and complete devices. However, the quality and precision of these fabrications often fall short of the rigorous standards required for advanced microfluidic applications. This study introduces a novel approach to enhance the dimensional accuracy of microchannels produced using a desktop LCD 3D printer. We propose a method for dimension compensation, optimize the printing parameters, and provide a straightforward post-treatment technique to ensure high-quality curing of polydimethylsiloxane (PDMS) in master molds made from photosensitive resin. Our investigation assesses the precision of 3D printing across three different scales of square cross-section microchannels by measuring their widths and heights, leading to the determination of optimal printing parameters that minimize dimensional errors. The dimensional errors are further reduced by introducing a series of dimension compensation factors, which correct the nominal dimensions of the microchannels by using the compensation factors in 3D printing. The dimensional accuracy is significantly improved after compensation even in fabricating complex microchannels of triangular cross-sections. Finally, a spiral channel of trapezoidal-like cross-section with tilted edges is fabricated for microfluidic application, and highly efficient particle separation is realized in the channel. The proposed method provides new insights for utilizing desktop LCD 3D printers to achieve high-accuracy microstructures necessary for advanced microfluidic applications.

Dynamic Characteristics of Composite Sandwich Panel with Triangular Chiral (Tri-Chi) Honeycomb under Random Vibration.

A full triangular chiral (Tri-Chi) honeycomb, combining a honeycomb structure with triangular chiral configuration, notably impacts the Poisson's ratio (PR) and stiffness. To assess the random vibration properties of a composite sandwich panel with a Tri-Chi honeycomb core (CSP-TCH), a two-dimensional equivalent Reissner-Mindlin model (2D-ERM) was created using the variational asymptotic method. The precision of the 2D-ERM in free and random vibration analysis was confirmed through numerical simulations employing 3D finite element analysis, encompassing PSD curves and RMS responses. Furthermore, the effects of selecting the model class were quantified through dynamic numerical examples. Modal analysis revealed that the relative error of the first eight natural frequencies predicted by the 2D-ERM consistently remained below 7%, with the modal cloud demonstrating high reliability. The PSD curves and their RMS values closely aligned with 3D finite element results under various boundary conditions, with a maximum error below 5%. Key factors influencing the vibration characteristics included the ligament-rib angle of the core layer and layup modes of the composite facesheets, while the rib-to-ligament thickness ratio and the aspect ratio exert minimal influence. The impact of the ligament-rib angle on the vibration properties primarily stems from the significant shift in the core layer's Poisson's ratio, transitioning from negative to positive. These findings offer a rapid and precise approach for optimizing the vibration design of CSP-TCH.

Construction of cationic meso-thiazolium-BODIPY AIE fluorescent probes for viscosity imaging in dual organelles.

Two new cationic meso-thiazolium-BODIPY-based water-soluble and red-shifted fluorescent probes were constructed for the first time. They can monitor cellular viscosity in dual organelles and show aggregation-induced emission (AIE), which is ascribed to the efficient restricted rotation of meso-thiazolium in viscous or hindered systems. Probe 3 with an N-benzyl group shows better AIE as compared to probe 2 with an N-methyl group.

Pan-cancer subclonal mutation analysis of 7,827 tumors predicts clinical outcome.

Intra-tumor heterogeneity is an important driver of tumor evolution and therapy response. Advances in precision cancer treatment will require understanding of mutation clonality and subclonal architecture. Currently the slow computational speed of subclonal reconstruction hinders large cohort studies. To overcome this bottleneck, we developed Clonal structure identification through Pairwise Penalization, or CliPP, which clusters subclonal mutations using a regularized likelihood model. CliPP reliably processed whole-genome and whole-exome sequencing data from over 12,000 tumor samples within 24 hours, thus enabling large-scale downstream association analyses between subclonal structures and clinical outcomes. Through a pan-cancer investigation of 7,827 tumors from 32 cancer types, we found that high subclonal mutational load (sML), a measure of latency time in tumor evolution, was significantly associated with better patient outcomes in 16 cancer types with low to moderate tumor mutation burden (TMB). In a cohort of prostate cancer patients participating in an immunotherapy clinical trial, high sML was indicative of favorable response to immune checkpoint blockade. This comprehensive study using CliPP underscores sML as a key feature of cancer. sML may be essential for linking mutation dynamics with immunotherapy response in the large population of non-high TMB cancers.

Exploring e-sports fans' motivation for watching live streams based on self-determination theory.

This study seeks to examine the multifaceted influences of diverse motivational factors on the live streaming engagement of e-sports fans based on self-determination theory. While previous research has focused on the offline participation in e-sports events, the shift towards live streaming engagement has created a new and underexplored area: the motivations for live streaming viewing among e-sports fans. Consequently, this research develops an e-sports Live Streaming Viewing Motivation Scale for evaluating both intrinsic and extrinsic motivations underlying e-sports fans' live streaming engagement, and then utilises SPSS 26.0 and AMOS 26.0 to assess the reliability and validity of the scale. Subsequently, multiple linear regression analysis of 1052 questionnaires is employed to construct models and evaluate hypotheses. Findings indicate that : (1) Intrinsic motivation exhibits significant impact on the live viewing behaviour of e-sports fans. (2) However, the impact of extrinsic motivation is insignificant. (3) When both intrinsic and extrinsic motivations coexist, intrinsic motivation maintains a positive impact, whereas extrinsic motivation demonstrates a negative influence. (4) The motivational influence is multifaceted; notably, dimensions such as idol worship, leisure entertainment, and competitive stimulation positively affect live viewing motivation, while belonging identification, social engagement, and peripheral activities exert a negative impact. In conclusion, intrinsic motivation emerges as the primary driving force behind e-sports fans' live streaming viewing behaviour. Extrinsic motivation fails to independently influence live streaming engagement and even dampens enthusiasm when combined with intrinsic motivation. Theoretically, this study contributes to the existing literature on Self-determination theory and motivations behind e-sports live streaming viewing behaviour. It not only refines the motivation scale, but also elucidates the impact of various motivations on viewing behaviour. Practically, it provides insights for optimising e-sports products and services.

Critical Effects of Insoluble Additives in Liquid Electrolytes for Metal Batteries.

Rechargeable metal batteries have received widespread attention due to their high energy density by using pure metal as the anode. However, there are still many fundamental problems that need to be solved before approaching practical applications. The critical ones are low charge/discharge current due to slow ion transport, short cycle lifetime due to poor anode/cathode stability, and unsatisfied battery safety. To tackle these problems, various strategies have been suggested. Among them, electrolyte additive is one of the most widely used strategies. Most of the additives currently studied are soluble, but their reliability is questionable, and they can easily affect the electrochemical process, causing unwanted battery performance decline. On the contrary, insoluble additives with excellent chemical stability, high mechanical strength, and dimensional tunability have attracted considerable research exploration recently. However, there is no timely review on insoluble additives in metal batteries yet. This review summarizes various functions of insoluble additives: ion transport modulation, metal anode protection, cathode amelioration, as well as battery safety enhancement. Future research directions and challenges for insoluble solid additives are also proposed. It is expected this review will stimulate inspiration and arouse extensive studies on further improvement in the overall performance of metal batteries.

Fabrication of High Thermal Conductivity Aluminum Nitride Ceramics via Digital Light Processing 3D Printing.

The sintering of high-performance ceramics with complex shapes at low temperatures has a significant impact on the future application of ceramics. A joint process of digital light processing (DLP) 3D printing technology and a nitrogen-gas pressure-assisted sintering method were proposed to fabricate AlN ceramics in the present work. Printing parameters, including exposure energy and time, were optimized for the shaping of green bodies. The effects of sintering temperature, as well as nitrogen pressure, on the microstructure, density, and thermal conductivity of AlN ceramics were systematically discussed. A high thermal conductivity of 168 W·m-1·K-1 was achieved by sintering and holding at a significantly reduced temperature of 1720 °C with the assistance of a 0.6 MPa nitrogen-gas pressure. Further, a large-sized AlN ceramic plate and a heat sink with an internal mini-channel structure were designed and successfully fabricated by using the optimized printing and sintering parameters proposed in this study. The heat transfer performance of the ceramic heat sink was evaluated by infrared thermal imaging, showing excellent cooling abilities, which provides new opportunities for the development of ceramic heat dissipation modules with complex geometries and superior thermal management properties.

Association between atherogenic index of plasma and depressive symptoms in US adults: Results from the National Health and Nutrition Examination Survey 2005 to 2018.

OBJECTIVE: This study, utilizing data from the U.S. National Health and Nutrition Examination Survey (NHANES) between 2005 and 2018, investigates the association between the atherogenic index of plasma (AIP), a lipid biomarker, and symptoms of depression in American adults. METHODS: In this cross-sectional study of 12,534 adults aged 20 years and older, depressive symptoms were measured utilizing the Patient Health Questionnaire-9 (PHQ-9) scale. Weighted logistic regression models were employed to scrutinize the independent relationship between AIP levels and the likelihood of developing such symptoms. Moreover, a series of subgroup analyses were conducted to delve deeper into these relationships. RESULTS: Following adjustment for confounders, logistic regression by grouping AIP into quartiles revealed a significant association between AIP and an augmented likelihood of self-reported depression. Participants in the fourth quartile (Q4) exhibited a higher odds ratio (OR = 1.34, 95 % CI: 1.02-1.75, p < 0.05) compared to those in the first quartile (Q1). Notably, subgroup analysis unveiled significant interactions involving the smoking and diabetes subgroups, indicating that smoking status and diabetes may modify the relationship between AIP and depression incidence. CONCLUSION: This study reveals a positive correlation between AIP and the self-reported likelihood of depression among US adults, thereby underscoring AIP's potential clinical utility as a biomarker for depressive disorders. Our findings emphasize the necessity to consider and optimize cardiovascular health factors within depression management strategies and offer fresh insights into the development of risk stratification and intervention methods for psychiatric conditions.

Targeting dysregulated phago-/auto-lysosomes in Sertoli cells to ameliorate late-onset hypogonadism.

Age-related changes in testicular function can impact health and well-being. The mechanisms underlying age-related testicular dysfunction, such as late-onset hypogonadism (LOH), remain incompletely understood. Using single-cell RNA sequencing on human testes with LOH, we delineated Sertoli cells (SCs) as pivotal metabolic coordinators within the testicular microenvironment. In particular, lysosomal acidity probing revealed compromised degradative capacity in aged SCs, hindering autophagy and phagocytic flux. Consequently, SCs accumulated metabolites, including cholesterol, and have increased inflammatory gene expression; thus, we termed these cells as phago-/auto-lysosomal deregulated SCs. Exposure to a high-fat diet-induced phago-/auto-lysosomal dysregulated-like SCs, recapitulating LOH features in mice. Notably, efferent ductular injection and systemic TRPML1 agonist administration restored lysosomal function, normalizing testosterone deficiency and associated abnormalities in high-fat diet-induced LOH mice. Our findings underscore the central role of SCs in testis aging, presenting a promising therapeutic avenue for LOH.

Exploration of Novel Meso-C═N-BODIPY-Based AIE Fluorescent Rotors with Large Stokes Shifts for Organelle-Viscosity Imaging.

The research on fluorescent rotors for viscosity has attracted extensive interest to better comprehend the close relationships of microviscosity variations with related diseases. Although scientists have made great efforts, fluorescent probes for cellular viscosity with both aggregation-induced emissions (AIEs) and large Stokes shifts to improve sensing properties have rarely been reported. Herein, we first report four new meso-C═N-substituted BODIPY-based rotors with large Stokes shifts, investigate their viscosity/AIE characteristics, and perform cellular imaging of the viscosity in subcellular organelles. Interestingly, the meso-C═N-phenyl group-substituted probe 6 showed an obvious 594 nm fluorescence enhancement in glycerol and a moderate 650 nm red AIE emission in water. Further, on attaching CF3 to the phenyl group, a similar phenomenon was observed for 7 with red-shifted emissions, attributed to the introduction of a phenyl group, which plays a key role in the red AIE emissions and large Stokes shifts. Comparatively, for phenyl-group-free probes, both the meso-C═N-trifluoroethyl group and thiazole-substituted probes (8 and 9) exhibited good viscosity-responsive properties, while no AIE was observed due to the absence of phenyl groups. For cellular experiments, 6 and 9 showed good lysosomal and mitochondrial targeting properties, respectively, and were further successfully used for imaging viscosity through the preincubation of monensin and lipopolysaccharide (LPS), indicating that C═N polar groups potentially work as rotatable moieties and organelle-targeting groups, and the targeting difference might be ascribed to increased charges of thiazole. Therefore, in this study, we investigated the structural relationships of four meso-C═N BODIPY-based rotors with respect to their viscosity/AIE characteristics, subcellular-targeting ability, and cellular imaging for viscosity, potentially serving as AIE fluorescent probes with large Stokes shifts for subcellular viscosity imaging.

Optimization of Diagnosis-Related Groups for 14,246 Patients with Uterine Leiomyoma in a Single Center in Western China Using a Machine Learning Model.

Background: Uterine leiomyoma (UL) is one of the most common benign tumors in women, and its incidence is gradually increasing in China. The clinical complications of UL have a negative impact on women's health, and the cost of treatment poses a significant burden on patients. Diagnosis-related groups (DRG) are internationally recognized as advanced healthcare payment management methods that can effectively reduce costs. However, there are variations in the design and grouping rules of DRG policies across different regions. Therefore, this study aims to analyze the factors influencing the hospitalization costs of patients with UL and optimize the design of DRG grouping schemes to provide insights for the development of localized DRG grouping policies. Methods: The Mann-Whitney U-test or the Kruskal-Wallis H-test was employed for univariate analysis, and multiple stepwise linear regression analysis was utilized to identify the primary influencing factors of hospitalization costs for UL. Case combination classification was conducted using the exhaustive chi-square automatic interactive detection (E-CHAID) algorithm within a decision tree framework. Results: Age, occupation, number of hospitalizations, type of medical insurance, Transfer to other departments, length of stay (LOS), type of UL, admission condition, comorbidities and complications, type of primary procedure, other types of surgical procedures, and discharge method had a significant impact on hospitalization costs (P<0.05). Among them, the type of primary procedure, other types of surgical procedures, and LOS were the main factors influencing hospitalization costs. By incorporating the type of primary procedure, other types of surgical procedures, and LOS into the decision tree model, patients were divided into 11 DRG combinations. Conclusion: Hospitalization costs for UL are mainly related to the type of primary procedure, other types of surgical procedures, and LOS. The DRG case combinations of UL based on E-CHAID algorithm are scientific and reasonable.

The relationship between eye canting and vertical craniofacial skeletal asymmetry in adult patients with dento-maxillofacial deformities.

BACKGROUND: Whether eye canting in patients with asymmetric dento-maxillofacial deformities is the result of anatomical asymmetry or a compensatory head position remains controversial. OBJECTIVE: This cross-sectional study aims to verify whether eye canting is correlated with craniofacial skeletal asymmetry. METHODS & MATERIALS: This study was performed by measuring the computed tomographic scans of 223 patients with dento-maxillofacial deformities in Mimics 21.0 software. First grouping was determined based on the intersection angle between the line passing through bilateral lateral canthus point and Frankfurt horizontal plane, and final grouping was based on measurements of the pregroups. RESULTS: The patients were finally categorized into three groups: symmetry group (n = 163), asymmetry subgroups 1 (n = 33) and asymmetry subgroups 2 (n = 27). The results of multiple linear regression and comparisons among groups suggests the presence of orbital skeletal asymmetry in patients with eye canting and the eye canting is partly increment dependent of orbital skeletal asymmetry when using bilateral ears as the reference. The result also reveals that there is a greater angle between the line through bilateral ocular landmarks and the line through the bilateral ear landmarks in patients with ocular canting compared to patient without eye canting. CONCLUSION: Patients with asymmetric dento-maxillofacial deformities and with eye canting have vertical asymmetry of the orbital and cranial skeletal landmarks. These symmetry differences between the eyes and ears may affect the overall craniofacial symmetry after orthognathic surgery.

Translation and validation of a simplified Chinese version of the psychosocial assessment tool.

BACKGROUND: The Psychosocial Assessment Tool (PAT2.0) is widely used to assess psychosocial risk in families of children with cancer. Our study aims to apply PAT2.0 to Chinese patients and assess the reliability, content validity, and construct validity of the Chinese version. METHODS: A total of 161 participants completed the study, each with only one child diagnosed with cancer. Psychometric evaluations, including internal consistency, score distribution, test-retest reliability, and construct validity, were conducted. RESULTS: Cronbach's alpha values ranged from 0.732 to 0.843, indicating good internal consistency. Additionally, intraclass correlation coefficient values ranged from 0.869 to 0.984, indicating excellent test-retest reliability. The Simplified Chinese version of PAT2.0 demonstrated high construct validity in factor analyses and correlations with the General Functioning Subscale of the Family Assessment Device. CONCLUSION: The translation process of the Chinese version of PAT2.0 was successful, proving its applicability for psychosocial evaluation and interventions in families of children with cancer in China.

Artificial cavernosa-like tissue based on multibubble Matrigel and a human corpus cavernous fibroblast scaffold.

Ex vivo tissue culture of the human corpus cavernosum (CC) can be used to explore the tissue structural changes and complex signaling networks. At present, artificial CC-like tissues based on acellular or three-dimensional (3D)-printed scaffolds are used to solve the scarcity of primary penis tissue samples. However, inconvenience and high costs limit the wide application of such methods. Here, we describe a simple, fast, and economical method of constructing artificial CC-like tissue. Human CC fibroblasts (FBs), endothelial cells (ECs), and smooth muscle cells (SMCs) were expanded in vitro and mixed with Matrigel in specific proportions. A large number of bubbles were formed in the mixture by vortexing combined with pipette blowing, creating a porous, spongy, and spatial structure. The CC FBs produced a variety of signaling factors, showed multidirectional differentiation potential, and grew in a 3D grid in Matrigel, which is necessary for CC-like tissue to maintain a porous structure as a cell scaffold. Within the CC-like tissue, ECs covered the surface of the lumen, and SMCs were located inside the trabeculae, similar to the structure of the primary CC. Various cell components remained stable for 3 days in vitro , but the EC content decreased on the 7 th day. Wingless/integrated (WNT) signaling activation led to lumen atrophy and increased tissue fibrosis in CC-like tissue, inducing the same changes in characteristics as in the primary CC. This study describes a preparation method for human artificial CC-like tissue that may provide an improved experimental platform for exploring the function and structure of the CC and conducting drug screening for erectile dysfunction therapy.

Anion-Reinforced Solvating Ionic Liquid Electrolytes Enabling Stable High-Nickel Cathode in Lithium-Metal Batteries.

Ionic liquid electrolytes (ILEs) are promising to develop high-safety and high-energy-density lithium-metal batteries (LMBs). Unfortunately, ILEs normally face the challenge of sluggish Li+ transport due to increased ions' clustering caused by Coulombic interactions. Here a type of anion-reinforced solvating ILEs (ASILEs) is discovered, which reduce ions' clustering by enhancing the anion-cation coordination and promoting more anions to enter the internal solvation sheath of Li+ to address this concern. The designed ASILEs, incorporating chlorinated hydrocarbons and two anions, bis(fluorosulfonyl) imide (FSI-) and bis(trifluoromethanesulfonyl) imide (TFSI-), aim to enhance Li+ transport ability, stabilize the interface of the high-nickel cathode material (LiNi0.8Co0.1Mn0.1O2, NCM811), and retain fire-retardant properties. With these ASILEs, the Li/NCM811 cell exhibits high initial specific capacity (203 mAh g-1 at 0.1 C), outstanding capacity retention (81.6% over 500 cycles at 1.0 C), and excellent average Coulombic efficiency (99.9% over 500 cycles at 1.0 C). Furthermore, an Ah-level Li/NCM811 pouch cell achieves a notable energy density of 386 Wh kg-1, indicating the practical feasibility of this electrolyte. This research offers a practical solution and fundamental guidance for the rational design of advanced ILEs, enabling the development of high-safety and high-energy-density LMBs.

Age-Related Changes in Urethral Structure and Responds to Injury: Single-Cell Atlas of a Rat Model of Vaginal Birth Injury induced Stress Urinary Incontinence.

Stress urinary incontinence (SUI) greatly affects the daily life of numerous women and is closely related to a history of vaginal delivery and aging. We used vaginal balloon dilation to simulate vaginal birth injury in young and middle-aged rats to produce a SUI animal model, and found that young rats restored urethral structure and function well, but not the middle-aged rats. To identify the characteristics of cellular and molecular changes in the urethral microenvironment during the repair process of SUI. We profiled 51,690 individual female rat urethra cells from 24 and 48 weeks old, with or without simulated vaginal birth injury. Cell interaction analysis showed that signal networks during repair process changed from resting to active, and aging altered the distribution but not the overall level of cell interaction in the repair process. Similarity analysis showed that muscle, fibroblasts, and immune cells underwent large transcriptional changes during aging and repair. In middle-aged rats, cell senescence occurs mainly in the superficial and middle urothelium due to cellular death and shedding, and the basal urothelium expressed many Senescence-Associated Secretory Phenotype (SASP) genes. In conclusion, we established the aging and vaginal balloon dilation (VBD) model of female urethral cell anatomy and the signal network landscape, which provides an insight into the normal or disordered urethra repair process and the scientific basis for developing novel SUI therapies.

Achieving High Initial Coulombic Efficiency and Capacity in a Surface Chemical Grafting Layer of Plateau-type Sodium Titanate.

The plateau-type sodium titanate with suitable sodiation potential is a promising anode candidate for high safe and high energy density of sodium-ion batteries (SIBs). However, the poor initial Coulombic efficiency (ICE) and cyclic instability of sodium titanate are attributed to the unstable interfacial structure along with the decomposition of electrolytes, resulting in the continuous formation of solid electrolyte interface (SEI) film. To address this issue, a chemical grafting method is developed to fabricate a highly stable interface layer of inert Al2O3 on the sodium titanate anode, rendering the high ICE and excellent cycling stability. Based on theoretical calculations, NaPF6 are more likely adsorption on the Al2O3 surface and produce sodium fluoride. The formation of a thin and dense SEI film with rich sodium fluoride achieves the low interfacial resistances and charge-transfer resistances. Benefitting from our design, the obtained sodium titanate exhibits a high ICE from 67.7 % to 79.4 % and an enhanced reversible capacity from 151 mAh g-1 to 181 mAh g-1 at 20 mA g-1, along with an increase in capacity retention from 56.5 % to 80.6 % after 500 cycles. This work heralds a promising paradigm for rational regulation of interfacial stability to achieve high-performance anodes for SIBs.

Critical Review of Emerging Pre-metallization Technologies for Rechargeable Metal-Ion Batteries.

Low Coulombic efficiency, low-capacity retention, and short cycle life are the primary challenges faced by various metal-ion batteries due to the loss of corresponding active metal. Practically, these issues can be significantly ameliorated by compensating for the loss of active metals using pre-metallization techniques. Herein, the state-of-the-art development in various pr-emetallization techniques is summarized. First, the origin of pre-metallization is elaborated and the Coulombic efficiency of different battery materials is compared. Second, different pre-metallization strategies, including direct physical contact, chemical strategies, electrochemical method, overmetallized approach, and the use of electrode additives are summarized. Third, the impact of pre-metallization on batteries, along with its role in improving Coulombic efficiency is discussed. Fourth, the various characterization techniques required for mechanistic studies in this field are outlined, from laboratory-level experiments to large scientific device. Finally, the current challenges and future opportunities of pre-metallization technology in improving Coulombic efficiency and cycle stability for various metal-ion batteries are discussed. In particular, the positive influence of pre-metallization reagents is emphasized in the anode-free battery systems. It is envisioned that this review will inspire the development of high-performance energy storage systems via the effective pre-metallization technologies.