The production and physicochemical properties of a biosurfactant mixture obtained from Sphingobacterium detergens.

The commercial application of a new biosurfactant such as the one produced by Sphingobacteriumdetergens needs a cost-effective process and knowledge of its properties. In the present study, a specific medium and a downstream process have been developed to enhance biosurfactant production. Optimal concentrations of nutrients in MCA medium were (g/L) the following: KH(2)PO(4), 1; K(2)HPO(4), 2; CO(NH(2))(2) 0.88; CaCl(2) 0.01; FeSO(4)·7H(2)O, 0.01; MgSO(4)·7H(2)O 0.5; KCl, 1.0; trace elements 0.05 mL. Biosurfactant production in the MCA medium required a bacterial co-metabolism of glucose and an n-alkane. A fed-batch culture with supernatant lyophilization prior to organic extraction produced 466 mg/L of organic extract, which represents a 6.9-fold increase in production. The newly obtained biosurfactant was a complex mixture of molecules. The three characterized fractions consisted of the complete fraction and two second-level purification fractions with apolar and polar characteristics. The complete and apolar fractions have been shown to self-aggregate in the form of lamellar liquid crystals at a high concentration and bilayers at lower concentrations. Negatively charged particles were identified, which were neutralized at a low pH with a concomitant increase in size. The pH affected the surface tension of the solutions congruently with phosphate headgroups.

Isolation and partial characterization of a biosurfactant mixture produced by Sphingobacterium sp. isolated from soil.

Strain 6.2S, isolated from soil and identified as a Sphingobacterium sp., is the first strain in this genus to be reported as a biosurfactant producer, being able to reduce the surface tension of its culture supernatant to 32 mN/m. In this work, biosurfactants from the culture supernatant were purified and partially characterized. The crude extract (10 g/L) was very effective in reducing surface tension (22 mN/m). Thin layer chromatography (TLC) indicated that a mixture of various biosurfactants was present in the 6.2S crude extract. After purification, Fraction A, a phospholipid mixture, reduced surface tension to 33 mN/m. Fraction B was a mixture of lipopetides and at least one glycolipid. The surface tension-concentration curve showed two plateaux, the first of which can be attributed to a critical aggregation concentration of the biosurfactant with a protein (2.7 g/L) and the second to the true cmc in water (6.3g/L).

The physicochemical properties and chemical composition of trehalose lipids produced by Rhodococcus erythropolis 51T7.

This study analyzed the chemical and physical properties of a biosurfactant synthesized by Rhodococcus sp. 51T7. The biosurfactant was a trehalose tetraester (THL) consisting of six components: one major and five minor. The hydrophobic moieties ranged in size from 9 to 11 carbons. The critical micelle concentration (CMC) was 0.037g L(-1) and the interfacial tension against hexadecane was 5mN m(-1). At pH 7.4 the glycolipid CMC/critical aggregation concentration (CAC) was 0.05g L(-1) and at pH 4 it was 0.034g L(-1). A phase diagram revealed effective emulsification with water and paraffin or isopropyl myristate. A composition of 11.3-7.5-81.8 (isopropyl myristate-THL-W) was stable for at least 3 months. The HLB was 11 and the phase behaviour of the glycolipid revealed the formation of lamellar and hexagonal liquid-crystalline textures.

Organotin compounds alter the physical organization of phosphatidylcholine membranes.

Organotin compounds have a broad range of biological activities and are ubiquitous contaminants in the environment. Their toxicity mainly lies in their action on the membrane. In this contribution we study the interaction of tributyltin and triphenyltin with model membranes composed of phosphatidylcholines of different acyl chain lengths using differential scanning calorimetry, (31)P-nuclear magnetic resonance, X-ray diffraction and infrared spectroscopy. Organotin compounds broaden the main gel to liquid-crystalline phase transition, shift the transition temperature to lower values and induce the appearance of a new peak below the main transition peak. These effects are more pronounced in the case of tributyltin and are quantitatively larger as the phosphatidylcholine acyl chain length decreases. Both tributyltin and triphenyltin increase the enthalpy change of the transition in all the phosphatidylcholine systems studied except in dilauroylphosphatidylcholine. Organotin compounds do not affect the macroscopic bilayer organization of the phospholipid but do affect the degree of hydration of its carbonyl moiety. The above evidence supports the idea that organotin compounds are located in the upper part of the phospholipid palisade near the lipid/water interface.

Labeling the Ca2+-ATPase of skeletal muscle sarcoplasmic reticulum with maleimidylsalicylic acid.

Maleimidylsalicylic acid reacts with the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum with high affinity and inhibits the ATPase activity following a pseudo-first-order kinetic with a rate constant of 8.3 m(-1) s(-1). Calcium binding remains unaffected in the maleimide-inhibited ATPase. However, the presence of ATP, ADP, and, to a lesser extent, AMP protects the enzyme against inhibition. Furthermore, ATPase inhibition is accompanied by a concomitant decrease in ATP binding. The stoichiometry of the nucleotide-dependent maleimidylsalicylic acid binding is 6-10 nmol/mg ATPase, which corresponds to the binding of up to one molecule of maleimide/molecule of ATPase. The stoichiometry of maleimide binding is decreased in the presence of nucleotides and in the ATPase previously labeled with fluorescein-5'-isothiocyanate or N-ethylmaleimide A fluorescent peptide was isolated by high performance liquid chromatography after trypsin digestion of the maleimide-labeled ATPase. Analysis of the sequence and mass spectrometry of the peptide leads us to propose Cys(344) as the target for maleimidylsalicylic acid in the inhibition reaction. The effect of Cys(344) modification on the nucleotide site is discussed.

Characterization of phenylmaleimide inhibition of the Ca(2+)-ATPase from skeletal-muscle sarcoplasmic reticulum.

The Ca(2+)-ATPase from sarcoplasmic reticulum reacts with phenylmaleimide, producing the inhibition of the ATPase activity following a pseudo-first-order kinetic with a rate constant of 19 M(-1) s(-1). Calcium and ATP binding are not altered upon phenylmaleimide inhibition. However, the presence of millimolar calcium, and to a lesser extent magnesium, in the inhibition medium enhances the effect of phenylmaleimide, causing a higher degree of inhibition. Solubilization with C(12)E(8) does not affect the ATPase inhibition, excluding any kind of participation of the lipid bilayer. Phosphorylation with ATP in steady-state conditions as well as phosphorylation with inorganic phosphate in equilibrium conditions were strongly inhibited. Conversely, we have found that the occupancy of the phosphorylation site by ortovanadate fully protects against the inhibitory effect of phenylmaleimide, indicating a conformational transition associated with the phosphorylation reaction.

Location of N-cyclohexyl-N'-(4-dimethyl-amino-alpha-naphthyl)carbodiimide- binding site in sarcoplasmic reticulum Ca2+-transporting ATPase.

The Ca2+-transporting ATPase has been labeled with N-cyclohexyl-N'-(4-dimethyl-amino-alpha-naphthyl)carbodiimide (NCD-4), a fluorescent carbodiimide which reacts with carboxyl groups of acidic residues. It has been reported that NCD-4 labels a transmembrane portion of the protein at the high-affinity calcium-binding sites. We have determined the depth of the calcium-sensitive probe by quenching the fluorescence by nitroxide-substituted fatty acids with its spin probe located at different carbons of the fatty acid chain (5, 7, 10, 12 and 16-nitroxide derivatives). We have found that all the calcium-sensitive fluorescence is quenched and that the efficiency of quenching decreases as the n-(4,4-dimethyl-3-oxazolinyloxy) (Doxyl) group is deeper in the membrane. We conclude that the NCD-4 label which is involved in the high-affinity calcium-binding site is located near the water/lipid interface. The fluorescence of the NCD-4 bound to that site can be quenched by acrylamide and Cu2+ but not by iodide, probably due to its anionic nature which will be repulsed by the abundance of negative charges of Glu and Asp residues of NCD-4 located at this site. The hydrophobic location of NCD-4 was confirmed by the fact that its fluorescence could be quenched by the spin label 2,2,6,6-tetramethyl-1-piperidine-N-oxyl but not by 4-hydroxy-2,2,6,6-tetramethyl-1-piperidine-N-oxyl which is much less hydrophobic.

Involvement of an arginyl residue in the nucleotide-binding site of Ca(2+)-ATPase from sarcoplasmic reticulum as seen by reaction with phenylglyoxal.

1. Chemical modification of the Ca(2+)-ATPase with phenylglyoxal, as a modifier of arginine residues, leads to an almost total loss of the ATPase activity. The presence of nucleotides in the reaction medium protects against the binding of 18 nmol of phenylglyoxal/mg of protein and this reduction in the binding of phenylglyoxal is accompanied by a substantial retention of ATPase activity. The incorporation of phenylglyoxal to the protein alters neither calcium binding nor phosphorylation from inorganic phosphate. Nevertheless the binding of nucleotides is dramatically inhibited and, consequently, so is phosphorylation from ATP. Fluorescein 5'-isothiocyanate labelling of the phenylglyoxal-modified ATPase is not affected but, on the other hand, phenylglyoxal is not able to modify the fluorescein 5'-isothiocyanate-prelabelled ATPase. The way in which ATPase inhibition depends on the presence of phenylglyoxal indicates that this process occurs in a pseudo-first-order reaction. However, the dependence of the apparent first-order rate constant on phenylglyoxal concentration appears to be more complex and an inhibition mechanism of two steps, with phenylglyoxal binding, has to be taken into account. 2. We have found that phenylglyoxal labels both A and B tryptic fragments, but only B fragment labelling is prevented by ATP. The sequencing of peptides from mild acid hydrolysis of phenylglyoxal-labelled ATPase shows that phenylglyoxal is located in the Ala506-Gly595 peptide that is a part of the B fragment. 3. We conclude that phenylglyoxal inactivates the calcium pump in a two-step mechanism in which the second step is irreversible. Phenylglyoxal labels an arginyl residue in the Ala506-Gly595 peptide that can be protected by the binding of ATP to its site.

Extensive proteolytic digestion of the (Ca2+ + Mg2+)-ATPase from sarcoplasmic reticulum leads to a highly hydrophobic proteinaceous residue with a mainly alpha-helical structure.

The purified (Ca2+ + Mg2+)-ATPase from sarcoplasmic reticulum was subjected to extensive proteolysis by using trypsin and proteinase K. This digestion led to the elimination of a considerable portion of the protein, so that the lipid to protein weight ratio was increased from 0.44 in the purified ATPase to 1.20 after extensive proteolysis. After the digestion, the residue was found to be considerably enriched in hydrophobic amino acids. FT-IR spectroscopic studies indicated that the secondary structure of the proteolytic residue was enriched in alpha-helix with 75%, compared with 48% in the intact purified ATPase. FT-IR studies using ATR polarization showed that the alpha-helical part of the residue of proteolytic digestion was considerably more polarized than the purified ATPase, indicating that, on average, the alpha-helices of the residual protein should lie with an orientation closer to the normal to the plane of the membrane. Thermal denaturation studies showed that the residue of proteolysis was considerably more stable than the intact purified ATPase. This would be compatible with the residue being protected from denaturation by its hydrophobic location within the membrane. This study is experimental evidence of the alpha-helical structure of the membrane part of this protein, as suggested by predictions made from its known primary structure (Brandl et al., 1986).

A kinetic study of an unstable enzyme measured through coupling reactions. Application to the self-inactivation of detergent-solubilized Ca(2+)-ATPase from sarcoplasmic reticulum.

A methodology for the kinetic study of the self-inactivation of an unstable enzyme has been developed by using the transient-phase approach when the enzymatic activity is measured through a coupled enzyme system. An experimental design has been developed and applied to the inactivation of the Ca(2+)-ATPase from sarcoplasmic reticulum solubilized in the monomeric state. The catalytic activity of the ATP hydrolysis is determined in the presence of pyruvate kinase and lactate dehydrogenase as auxiliary enzymes, and the oxidation of the last substrate, NADH, is continuously monitored. The experimental results show that both substrates, ATP and calcium, protect against enzyme inactivation. This enzyme, the monomeric ATPase, fulfills the catalytic cycle of the native ATPase, and free enzyme and first-calcium bound enzyme are proposed as the intermediates which are being inactivated.

Intramolecular distances within the Ca(2+)-ATPase from sarcoplasmic reticulum as estimated through fluorescence energy transfer between probes.

Fluorescence energy transfer measurements have been carried out to estimate intramolecular distances between probes bound to Ca(2+)-transporting ATPase (Ca(2+)-ATPase) as well as distances between these probes and the phospholipid headgroup. The nucleotide binding site was monitored by using 1,N6-ethenoadenosine 5'-triphosphate, a fluorescent analogue of ATP, and also by labelling Lys515 with fluorescein 5'-isothiocyanate. Three different cysteine residues were individually labelled using the following probes: 5-[(2-iodoacetyl)aminoethyl]amino-naphthalene-1-sulfonic acid (I-AEDANS), 7-chloro-4-nitro-2,1,3-benzoxadiazole (NBD-Cl) and fluorescent maleimides. The surface of the membrane was labelled by reconstitution with fluorescent phospholipids (fluorescein and rhodamine derivatives). We found a distance of 4.1 nm from the nucleotide binding site to NBD (at Cys344), and the same distance to fluorescent maleimides (at Cys364). The AEDANS label (at Cys670,672) was found separated 3.5 nm from NBD, 4.4 nm from fluorescent maleimides, and 3.9 nm from the lipid matrix. The NBD label was 3.2 nm apart from fluorescent maleimides and 2.2 nm from the lipid matrix. Finally, fluorescent maleimides were found to be located 4.2 nm above the membrane surface. All these distances agree with a molecular model in which NBD is located in the stalk portion of the Ca(2+)-ATPase, near the surface of the membrane, and the rest of the probes are above it, in the globular domain of the protein.

Characterization of ruthenium red-binding sites of the Ca(2+)-ATPase from sarcoplasmic reticulum and their interaction with Ca(2+)-binding sites.

Sarcoplasmic reticulum Ca(2+)-ATPase has previously been shown to bind and dissociate two Ca2+ ions in a sequential mode. This behaviour is confirmed here by inducing sequential Ca2+ dissociation with Ruthenium Red. Ruthenium Red binds to sarcoplasmic reticulum vesicles (6 nmol/mg) with a Kd = 2 microM, producing biphasic kinetics of Ca2+ dissociation from the Ca(2+)-ATPase, decreasing the affinity for Ca2+ binding. Studies on the effect of Ca2+ on Ruthenium Red binding indicate that Ruthenium Red does not bind to the high-affinity Ca(2+)-binding sites, as suggested by the following observations: (i) micromolar concentrations of Ca2+ do not significantly alter Ruthenium Red binding to the sarcoplasmic reticulum; (ii) quenching of the fluorescence of fluorescein 5'-isothiocyanate (FITC) bound to Ca(2+)-ATPase by Ruthenium Red (resembling Ruthenium Red binding) is not prevented by micromolar concentrations of Ca2+; (iii) quenching of FITC fluorescence by Ca2+ binding to the high-affinity sites is achieved even though Ruthenium Red is bound to the Ca(2+)-ATPase; and (iv) micromolar Ca2+ concentrations prevent inhibition of the ATP-hydrolytic capability by dicyclohexylcarbodi-imide modification, but Ruthenium Red does not. However, micromolar concentrations of lanthanides (La3+ and Tb3+) and millimolar concentrations of bivalent cations (Ca2+ and Mg2+) inhibit Ruthenium Red binding as well as quenching of FITC-labelled Ca(2+)-ATPase fluorescence by Ruthenium Red. Studies of Ruthenium Red binding to tryptic fragments of Ca(2+)-ATPase, as demonstrated by ligand blotting, indicate that Ruthenium Red does not bind to the A1 subfragment. Our observations suggest that Ruthenium Red might bind to a cation-binding site in Ca(2+)-ATPase inducing fast release of the last bound Ca2+ by interactions between the sites.

Effect of diethylstilbestrol and related compounds on the Ca(2+)-transporting ATPase of sarcoplasmic reticulum.

Diethylstilbestrol is a potent inhibitory agent of the Ca(2+)-ATPase activity of sarcoplasmic reticulum membranes. Other structurally related molecules, such as dienestrol or hexestrol having hydroxyl groups at para positions of the two benzene rings produce similar effects. The absence or derivatization of the hydroxyl groups as occurs with trans-stilbene or diethylstilbestrol dipropionate converts the structure in an activating agent of the enzyme. The Ca2+ transport profiles in the presence of the referred drugs reproduces the same behavior observed for the hydrolytic activity. There is also a clear indication of a membrane-mediated mechanism of these drugs. Ligand binding experiments at equilibrium indicate that diethylstilbestrol decreases the affinity for Ca2+ of the high affinity Ca2+ sites. Functional studies reveal that the activation/inhibition induced by these drugs is correlated with decreased levels of phosphoenzyme at steady state, and these levels are sensitive to the Ca2+ concentration. Chase experiments of [32P]phosphoenzyme and 45Ca2+ indicate a slight activation effect of diethylstilbestrol dipropionate on Ca2+ dissociation during the enzyme turnover. The use of different anthroyloxy derivatives of stearic acid as a fluorescent probe suggest that diethylstilbestrol and other inhibitory agents could be located close to the polar region of the lipid bilayer, which interferes with the Ca(2+)-binding sites, whereas the activators trans-stilbene and diethylstilbestrol dipropionate may have a deeper position into the membrane, which accelerates the Ca2+ translocation process.

Rapid determination of alpha-tocopherol in sarcoplasmic reticulum membranes by reverse phase HPLC.

A simple isocratic high performance liquid chromatograph (HPLC) system is described to perform a rapid separation, identification and quantitative determination of vitamin E (alpha-tocopherol) in biological membranes. It makes use of a reverse phase C18 column with pure methanol as the mobile phase, and an ultraviolet detector which enables its quantification in the nanogram scale. This procedure was applied to lipid extracts from whole muscle homogenate and from a preparation of sarcoplasmic reticulum vesicles from skeletal muscle, where the vitamin E contents was determined.

On the effect of lysophosphatidylcholine, platelet activating factor and other surfactants on calcium permeability in sarcoplasmic reticulum vesicles.

The effect of low concentrations of lysophosphatidylcholine (LPC), platelet-activating factor (PAF) and other surfactants (Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate) on membrane permeability of native sarcoplasmic reticulum vesicles and sarcoplasmic reticulum lipid vesicles, has been studied. Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate were all able to permeabilize membranes at concentrations of surfactants below their critical micellar concentration (CMC) in both lipid and native vesicles, being the K0.5 of calcium release from native vesicles lower than that from lipid vesicles. The values of these K0.5 were well correlated with the corresponding CMC values for each type of membrane. However, both LPC and PAF behaved in a different way since, although they induced permeabilization of the native vesicles at values of K0.5 close to their CMC, their K0.5 values for permeabilizing vesicles, prepared by using lipids extracted from sarcoplasmic reticulum, were much higher than their corresponding CMC.

Characterization of the steady-state calcium fluxes in skeletal sarcoplasmic reticulum vesicles. Role of the Ca2+ pump.

Unidirectional Ca2+ fluxes (influx and efflux), supported by ATP as a phosphate-donor substrate, were measured without alteration of the lumenal Ca2+ content in longitudinal sarcoplasmic reticulum vesicles. The referred fluxes are dependent on extravesicular Ca2+, ATP and ADP. They are unaffected by ruthenium red but inhibited by quercetin. The Ca2+ fluxes at steady state are drastically diminished when ATP is substituted by acetylphosphate although the addition of 10 microM ADP increases the apparent rate constants more than eight fold. The observed fluxes appear to be dependent on Ca2(+)-ATPase phosphoenzyme transitions. The results indicate that: (a) the slow Ca2+ release, due to the passive permeability of the membrane, is a minor component of the total Ca2+ efflux, and (b) the ATPase protein is basically operating as a Ca2+/Ca2+ exchanger at steady state. Kinetic resolution of the Ca2+ fluxes, measured by isotopic tracer and rapid filtration techniques can be recreated by computer simulation of the ATPase reaction cycle featuring some modifications to account for the fast Ca2+/Ca2+ exchange and the uncoupling effect observed at steady state.

Effect of protease digestion on the secondary structure of sarcoplasmic reticulum Ca2(+)-ATPase as seen by FT-i.r. spectroscopy.

1. Upon controlled protein cleavage the catalytic activity of the Ca2(+)-ATPase from sarcoplasmic reticulum is drastically reduced concomitantly with small but significant changes in secondary structure as seen by Fourier transformed infrared (FT-i.r.) spectroscopy, although no loss of protein bound to the membrane is found. 2. FT-i.r. band fitting procedures show a reduction in the beta-sheet and turns content of the protein which is accompanied by an increase in alpha-helix and/or random structure. 3. These changes in the secondary structure of the protein appear to be well correlated to the tryptic digestion pattern and also to changes in the ATP hydrolysis rate of the Ca2(+)-ATPase. 4. It is concluded that these small changes reflect the disruption of key domains of the protein, which lie outside of the membrane matrix, leading to loss of enzymatic activity. 5. FT-i.r. spectroscopy appears to be a very useful technique to study changes in secondary structure of proteins.