RESUMEN
Cell wall homeostasis in bacteria is tightly regulated by balanced synthesis and degradation of peptidoglycan (PG), allowing cells to expand their sacculus during growth while maintaining physical integrity. In rod-shaped bacteria, actin-like MreB proteins are key players of the PG elongation machinery known as the Rod complex. In the Gram-positive model bacterium Bacillus subtilis depletion of the essential MreB leads to loss of rod shape and cell lysis. However, millimolar concentrations of magnesium in the growth medium rescue the viability and morphological defects of mreB mutants by an unknown mechanism. Here, we used a combination of cytological, biochemical and biophysical approaches to investigate the cell surface properties of mreB null mutant cells and the interactions of Mg2+ with the cell wall of B. subtilis. We show that ∆mreB cells have rougher and softer surfaces, and changes in PG composition indicative of increased DL- and DD-endopeptidase activities as well as increased deacetylation of the sugar moieties. Increase in DL-endopeptidase activity is mitigated by excess Mg2+ while DD-endopeptidase activity remains high. Visualization of PG degradation in pulse-chase experiments showed anisotropic PG hydrolase activity along the sidewalls of ∆mreB cells, in particular at the sites of increased cell width and bulging, while PG synthesis remained isotropic. Overall, our data support a model in which divalent cations maintain rod shape in ∆mreB cells by inhibiting PG hydrolases, possibly through the formation of crosslinks with carboxyl groups of the PG meshwork that affect the capacity of PG hydrolases to act on their substrate.
Asunto(s)
Bacillus subtilis/metabolismo , Proteínas Bacterianas/genética , Magnesio/metabolismo , N-Acetil Muramoil-L-Alanina Amidasa/metabolismo , Bacillus subtilis/genética , Proteínas Bacterianas/metabolismo , Pared Celular/metabolismo , Mutación , N-Acetil Muramoil-L-Alanina Amidasa/genéticaRESUMEN
Ectocarpus is a filamentous brown alga, which cell wall is composed mainly of alginates and fucans (80%), two non-crystalline polysaccharide classes. Alginates are linear chains of epimers of 1,4-linked uronic acids, ß-D-mannuronic acid (M) and α-L-guluronic acid (G). Previous physico-chemical studies showed that G-rich alginate gels are stiffer than M-rich alginate gels when prepared in vitro with calcium. In order to assess the possible role of alginates in Ectocarpus, we first immunolocalised M-rich or G-rich alginates using specific monoclonal antibodies along the filament. As a second step, we calculated the tensile stress experienced by the cell wall along the filament, and varied it with hypertonic or hypotonic solutions. As a third step, we measured the stiffness of the cell along the filament, using cell deformation measurements and atomic force microscopy. Overlapping of the three sets of data allowed to show that alginates co-localise with the stiffest and most stressed areas of the filament, namely the dome of the apical cell and the shanks of the central round cells. In addition, no major distinction between M-rich and G-rich alginate spatial patterns could be observed. Altogether, these results support that both M-rich and G-rich alginates play similar roles in stiffening the cell wall where the tensile stress is high and exposes cells to bursting, and that these roles are independent from cell growth and differentiation.
Asunto(s)
Alginatos/metabolismo , Pared Celular/química , Ácidos Hexurónicos/metabolismo , Phaeophyceae/fisiología , Estrés Mecánico , Resistencia a la Tracción , Pared Celular/metabolismo , Citoesqueleto/fisiología , Propiedades de SuperficieRESUMEN
Tip growth has been studied in pollen tubes, root hairs, and fungal and oomycete hyphae and is the most widely distributed unidirectional growth process on the planet. It ensures spatial colonization, nutrient predation, fertilization, and symbiosis with growth speeds of up to 800 µm h-1. Although turgor-driven growth is intuitively conceivable, a closer examination of the physical processes at work in tip growth raises a paradox: growth occurs where biophysical forces are low, because of the increase in curvature in the tip. All tip-growing cells studied so far rely on the modulation of cell wall extensibility via the polarized excretion of cell wall-loosening compounds at the tip. Here, we used a series of quantitative measurements at the cellular level and a biophysical simulation approach to show that the brown alga Ectocarpus has an original tip-growth mechanism. In this alga, the establishment of a steep gradient in cell wall thickness can compensate for the variation in tip curvature, thereby modulating wall stress within the tip cell. Bootstrap analyses support the robustness of the process, and experiments with fluorescence recovery after photobleaching (FRAP) confirmed the active vesicle trafficking in the shanks of the apical cell, as inferred from the model. In response to auxin, biophysical measurements change in agreement with the model. Although we cannot strictly exclude the involvement of a gradient in mechanical properties in Ectocarpus morphogenesis, the viscoplastic model of cell wall mechanics strongly suggests that brown algae have evolved an alternative strategy of tip growth. This strategy is largely based on the control of cell wall thickness rather than fluctuations in cell wall mechanical properties.
Asunto(s)
Phaeophyceae/crecimiento & desarrollo , Raíces de Plantas/crecimiento & desarrollo , Forma de la Célula , Pared Celular , Recuperación de Fluorescencia tras Fotoblanqueo/métodos , Ácidos Indolacéticos/metabolismo , Modelos BiológicosRESUMEN
Diatoms are known for their intricate, silicified cell walls (frustules). Silica polymerization occurs in a compartment called the silica deposition vesicle (SDV) and it was proposed that the cytoskeleton influences silica patterning through the SDV membrane (silicalemma) via interactions with transmembrane proteins. In this work we identify a family of proteins associated with the silicalemma, named SAPs for Silicalemma Associated Proteins. The T. pseudonana SAPs (TpSAPs) are characterized by their motif organization; each contains a transmembrane domain, serine rich region and a conserved cytoplasmic domain. Fluorescent tagging demonstrated that two of the TpSAPs were localized to the silicalemma and that the intralumenal region of TpSAP3 remained embedded in the silica while the cytoplasmic region was cleaved. Knockdown lines of TpSAP1 and 3 displayed malformed valves; which confirmed their roles in frustule morphogenesis. This study provides the first demonstration of altering silica structure through manipulation of a single gene.
Asunto(s)
Diatomeas/fisiología , Ingeniería Genética , Membranas Intracelulares/metabolismo , Proteínas de la Membrana/genética , Proteínas de la Membrana/metabolismo , Orgánulos/metabolismo , Dióxido de Silicio/metabolismo , Secuencia de Aminoácidos , Expresión Génica , Técnicas de Silenciamiento del Gen , Genes Reporteros , Proteínas de la Membrana/química , Transporte de ProteínasRESUMEN
The ability of excess Mg2+ to compensate the absence of cell wall related genes in Bacillus subtilis has been known for a long time, but the mechanism has remained obscure. Here, we show that the rigidity of wild-type cells remains unaffected with excess Mg2+ , but the proportion of amidated meso-diaminopimelic (mDAP) acid in their peptidoglycan (PG) is significantly reduced. We identify the amidotransferase AsnB as responsible for mDAP amidation and show that the gene encoding it is essential without added Mg2+ . Growth without excess Mg2+ causes ΔasnB mutant cells to deform and ultimately lyse. In cell regions with deformations, PG insertion is orderly and indistinguishable from the wild-type. However, PG degradation is unevenly distributed along the sidewalls. Furthermore, ΔasnB mutant cells exhibit increased sensitivity to antibiotics targeting the cell wall. These results suggest that absence of amidated mDAP causes a lethal deregulation of PG hydrolysis that can be inhibited by increased levels of Mg2+ . Consistently, we find that Mg2+ inhibits autolysis of wild-type cells. We suggest that Mg2+ helps to maintain the balance between PG synthesis and hydrolysis in cell wall mutants where this balance is perturbed in favor of increased degradation.
Asunto(s)
Ácido Diaminopimélico/metabolismo , Peptidoglicano/metabolismo , Bacillus subtilis/metabolismo , Proteínas Bacterianas/metabolismo , Pared Celular/metabolismo , Hidrólisis , Magnesio/metabolismo , Peptidoglicano/biosíntesisRESUMEN
Cells are sophisticated integrators of mechanical stimuli that lead to physiological, biochemical, and genetic responses. The bioluminescence of dinoflagellates, alveolate protists that use light emission for predator defense, serves as a rapid noninvasive whole-cell reporter of mechanosensitivity. In this study, we used atomic force microscopy (AFM) to explore the relationship between cell mechanical properties and mechanosensitivity in live cells of the dinoflagellate Pyrocystis lunula. Cell stiffness was 0.56 MPa, consistent with cells possessing a cell wall. Cell response depended on both the magnitude and velocity of the applied force. At the maximum stimulation velocity of 390 µm s(-1), the threshold response occurred at a force of 7.2 µN, resulting in a contact time of 6.1 ms and indentation of 2.1 µm. Cells did not respond to a low stimulation velocity of 20 µm s(-1), indicating a velocity dependent response that, based on stress relaxation experiments, was explained by the cell viscoelastic properties. This study demonstrates the use of AFM to study mechanosensitivity in a cell system that responds at fast timescales, and provides insights into how viscoelastic properties affect mechanosensitivity. It also provides a comparison with previous studies using hydrodynamic stimulation, showing the discrepancy in cell response between direct compressive forces using AFM and those within flow fields based on average flow properties.
Asunto(s)
Dinoflagelados/fisiología , Pared Celular/fisiología , Módulo de Elasticidad , Mediciones Luminiscentes , Microscopía de Fuerza Atómica/métodos , Microscopía Electroquímica de Rastreo , Imagen Óptica , Estimulación Física/métodos , ViscosidadRESUMEN
Over the last few years, a growing interest has been directed toward the use of macroalgae as a source of energy, food and molecules for the cosmetic and pharmaceutical industries. Besides this, macroalgal development remains poorly understood compared to other multicellular organisms. Brown algae (Phaeophyceae) form a monophyletic lineage of usually large multicellular algae which evolved independently from land plants. In their environment, they are subjected to strong mechanical forces (current, waves, and tide), in response to which they modify rapidly and reversibly their morphology. Because of their specific cellular features (cell wall composition, cytoskeleton organization), deciphering how they cope with these forces might help discover new control mechanisms of cell wall softening and cellulose synthesis. Despite the current scarcity in knowledge on brown algal cell wall dynamics and protein composition, we will illustrate, in the light of methods adapted to Ectocarpus siliculosus, to what extent atomic force microscopy can contribute to advance this field of investigation.
RESUMEN
Organic components associated with diatom cell wall silica are important for the formation, integrity, and function of the cell wall. Polysaccharides are associated with the silica, however their localization, structure, and function remain poorly understood. We used imaging and biochemical approaches to describe in detail characteristics of insoluble organic components associated with the cell wall in 5 different diatom species. Results show that an insoluble organic matrix enriched in mannose, likely the diatotepum, is localized on the proximal surface of the silica cell wall. We did not identify any organic matrix embedded within the silica. We also identified a distinct material consisting of glucose polymer with variable localization depending on the species. In some species this component was directly involved in the morphogenesis of silica structure while in others it appeared to be only a structural component of the cell wall. A novel glucose-rich structure located between daughter cells during division was also identified. This work for the first time correlates the structure, composition, and localization of insoluble organic matrices associated with diatom cell walls. Additionally we identified a novel glucose polymer and characterized its role during silica structure formation.
Asunto(s)
Pared Celular/química , Diatomeas/química , División Celular/fisiología , Pared Celular/ultraestructura , Diatomeas/ultraestructura , Cromatografía de Gases y Espectrometría de Masas , Glucosa/análisis , Manosa/análisis , Microscopía de Fuerza Atómica , Microscopía Fluorescente , Morfogénesis , Polimerizacion , Dióxido de Silicio/análisisRESUMEN
BACKGROUND: Silicon plays important biological roles, but the mechanisms of cellular responses to silicon are poorly understood. We report the first analysis of cell cycle arrest and recovery from silicon starvation in the diatom Thalassiosira pseudonana using whole genome microarrays. RESULTS: Three known responses to silicon were examined, 1) silicified cell wall synthesis, 2) recovery from silicon starvation, and 3) co-regulation with silicon transporter (SIT) genes. In terms of diatom cell wall formation, thus far only cell surface proteins and proteins tightly associated with silica have been characterized. Our analysis has identified new genes potentially involved in silica formation, and other genes potentially involved in signaling, trafficking, protein degradation, glycosylation and transport, which provides a larger-scale picture of the processes involved. During silicon starvation, an overrepresentation of transcription and translation related genes were up-regulated, indicating that T. pseudonana is poised to rapidly recover from silicon starvation and resume cell cycle progression upon silicon replenishment. This is in contrast to other types of limitation, and provides the first molecular data explaining the well-established environmental response of diatoms to grow as blooms and to out-compete other classes of microalgae for growth. Comparison of our data with a previous diatom cell cycle analysis indicates that assignment of the cell cycle specific stage of particular cyclins and cyclin dependent kinases should be re-evaluated. Finally, genes co-varying in expression with the SITs enabled identification of a new class of diatom-specific proteins containing a unique domain, and a putative silicon efflux protein. CONCLUSIONS: Analysis of the T. pseudonana microarray data has provided a wealth of new genes to investigate previously uncharacterized cellular phenomenon related to silicon metabolism, silicon's interaction with cellular components, and environmental responses to silicon.
Asunto(s)
Diatomeas/genética , Silicio/metabolismo , Transcriptoma , Secuencia de Aminoácidos , Ciclo Celular/genética , Pared Celular/metabolismo , Quinasas Ciclina-Dependientes/genética , Quinasas Ciclina-Dependientes/metabolismo , Ciclinas/genética , Ciclinas/metabolismo , Diatomeas/metabolismo , Datos de Secuencia Molecular , Análisis de Secuencia por Matrices de Oligonucleótidos , Alineación de SecuenciaRESUMEN
BACKGROUND: The diatom cell wall, called the frustule, is predominantly made out of silica, in many cases with highly ordered nano- and micro-scale features. Frustules are built intracellularly inside a special compartment, the silica deposition vesicle, or SDV. Molecules such as proteins (silaffins and silacidins) and long chain polyamines have been isolated from the silica and shown to be involved in the control of the silica polymerization. However, we are still unable to explain or reproduce in vitro the complexity of structures formed by diatoms. METHODS/PRINCIPAL FINDING: In this study, using fluorescence microscopy, scanning electron microscopy, and atomic force microscopy, we were able to compare and correlate microtubules and microfilaments with silica structure formed in diversely structured diatom species. The high degree of correlation between silica structure and actin indicates that actin is a major element in the control of the silica morphogenesis at the meso and microscale. Microtubules appear to be involved in the spatial positioning on the mesoscale and strengthening of the SDV. CONCLUSIONS/SIGNIFICANCE: These results reveal the importance of top down control over positioning of and within the SDV during diatom wall formation and open a new perspective for the study of the mechanism of frustule patterning as well as for the understanding of the control of membrane dynamics by the cytoskeleton.
Asunto(s)
Citoesqueleto/metabolismo , Dióxido de Silicio/metabolismo , Citoesqueleto de Actina/metabolismo , Actinas/química , Pared Celular , Diatomeas , Microscopía de Fuerza Atómica/métodos , Microscopía Electrónica de Rastreo/métodos , Microscopía Fluorescente/métodos , Microtúbulos/metabolismo , Modelos Biológicos , Péptidos/metabolismo , Poliaminas/metabolismo , Dióxido de Silicio/químicaRESUMEN
Diatoms are unicellular algae that make cell walls out of silica with highly ornate features on the nano- to microscale. The complexity and variety of diatom cell wall structures exceeds those possible with synthetic materials chemistry approaches. Understanding the design and assembly processes involved in diatom silicification should provide insight into patterning on the unicellular level, and information for biomimetic approaches for materials synthesis. In this report we examine the formation of distinct cell wall structures (valves and girdle bands) in the diatom Cyclotella cryptica by high resolution imaging using SEM, AFM, and fluorescence microscopy. Special attention was paid to imaging structural intermediates, which provided insight into the underlying design and assembly principles involved. Distinct stages in valve formation were identified, indicating a transition from a fractally organized structure to a dynamic pathway-dependent process. Substructures in the valves appeared to be pre-positioned prior to complete silicification, suggesting that organics responsible for these structures were pre-assembled and put in place. Microtubules and microfilamentous actin play significant roles in the positioning process, and actin is also important in the pathway-dependent expansion of the front of silicification. Our results indicate that even though all silica structures in C. cryptica are made of assemblies of nanoparticulate silica, control of meso- and microscale structure occurs on a higher order. It is apparent that diatoms integrate bottom up and top down control and synthesis mechanisms to form the diversity of structures possible.
Asunto(s)
Citoesqueleto de Actina/fisiología , Pared Celular/metabolismo , Pared Celular/ultraestructura , Diatomeas/metabolismo , Diatomeas/ultraestructura , Morfogénesis/fisiología , Citoesqueleto de Actina/metabolismo , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Microtúbulos/metabolismo , Microtúbulos/fisiología , Nanoestructuras/ultraestructuraRESUMEN
Among diatoms, Phaeodactylum tricornutum is a peculiar species that exists in three morphotypes with distinct cell wall structures and low silica content. X-ray photoelectron spectroscopy (XPS) analysis was performed on P. tricornutum and compared with diatom Thalassiosira pseudonana; the results provide new information on the chemical composition (elements, chemical functions, classes of biochemical compounds) of the cell surface. Two types of silicon were found: condensed silica (SiO(2)) and weakly polymerised silicate. Cells of T. pseudonana showed the highest concentration of silicon, with a majority in the form of condensed silica. For the fusiform and triradiate morphotypes of P. tricornutum, the majority of the small concentration of silica found was in the form of weakly polymerised silicate. For all morphotypes of P. tricornutum, higher polysaccharide concentrations replaced silica as a structural part of the cell wall. In both diatoms, a high concentration of lipids was measured, in the form of carboxylic esters. Protonated nitrogen and phosphate were found in correlated amounts and attributed not only to phospholipids but also to phosphoproteins. Chloride ions characterised by a high electron density might be associated to these moieties. Sulfate groups were also detected, principally in P. tricornutum, and attributed to monoesters of polysaccharides.
Asunto(s)
Diatomeas/química , Cloruros/química , Diatomeas/citología , Lípidos/química , Nitrógeno/química , Fosfatos/química , Fosfoproteínas/química , Silicatos/química , Silicio/química , Dióxido de Silicio/química , Espectrofotometría , Sulfatos/química , Propiedades de Superficie , Rayos XRESUMEN
A major issue in the study of biosilicification processes is the harsh chemical conditions required for silica dissolution, which often lead to denaturation of the associated bio-organic matter. In order to demonstrate the potential of solid state NMR for investigating silicified materials of natural origin, this technique was applied to isotopically enriched Thalassiosira pseudonana diatom cells. (29)Si, (1)H,(31)P, (13)C and (15)N solid state NMR studies were performed on whole cells, SDS-extracted and H(2)O(2)-cleaned silica shells. Cross-polarization techniques were useful for identifying the presence of mobile and rigid molecules, allowing loosely bound and silica-entrapped species to be discriminated. Successive cleaning procedures efficiently eliminated weakly associated organic matter. The H(2)O(2)-cleaned silica shell still contained carbohydrates (mainly chitin) and proteins as well as lipids. This suggests that the role of lipids in diatom shell formation may have been underestimated so far, demonstrating the potential of solid state NMR for studying composite biomaterials.
Asunto(s)
Pared Celular/química , Diatomeas/química , Resonancia Magnética Nuclear Biomolecular/métodos , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Dióxido de Silicio/químicaRESUMEN
The ultrastructure and mechanical properties of the fusiform, triradiate and ovoid morphotypes of Phaeodactylum tricornutum were investigated using atomic force microscopy. Using topographic imaging, we showed that the surface of the ovoid form is rougher than those of the two other specimens, and coated with an outer layer of extracellular polymers. Using spatially resolved force-indentation curves, we found that the valve of the ovoid form is about five times stiffer (Young modulus of approximately 500 kPa) than those of the other forms (approximately 100 kPa), a finding fully consistent with the fact that only the ovoid form has a silica valve, whereas the valves in the other two consist mostly of organic material. Notably, the girdle region of both fusiform and ovoid forms was five times softer than the valve, suggesting that this region is poor in silica and enriched in organic material. For the triradiate form, we showed the arms to be softer than the core region, presumably as a result of organelle localization. Last, we observed mucilaginous footprints of moderate stiffness (approximately 100 kPa) in the vicinity of ovoid diatoms, which we believe are secreted extracellular polymers.