Clinical outcomes of single implant supported crowns utilising the titanium base abutment: A 7.5-year prospective cohort study.

OBJECTIVE: To assess radiographic, clinical and patient-reported outcomes of single zirconia implant-supported crowns on titanium base abutments (TBA) over a 7.5-year period. METHODS: Twenty-four patients received bone-level titanium implants and screw-retained zirconia implant crowns utilising TBA. Marginal bone level (MBL), clinical parameters (probing depth-PD, bleeding on probing-BoP, plaque control record-PCR), technical complications (USPHS criteria) and patient satisfaction were assessed at crown delivery (baseline), 1 year (FU-1) and at 7.5 years (FU-7.5) of follow-up. RESULTS: Eighteen patients were available for re-examination at 7.5 years. The mean MBL at FU-7.5 (0.35 ± 0.20mm) did not significantly change compared to baseline (0.54 ± 0.39, p=.352) and to FU-1 (0.54 ± 0.45mm, p=0.524). From baseline to 7.5 years, the mean PD increased significantly, from 3.0 ± 0.6mm to 3.7 ± 0.8mm (p=0.005). However, BoP and PCR did not significantly change; (BOP: from 27.1 ± 20.7% to 25.0 ± 20.0%, p=0.498; PCR: from 11.1 ± 21.2% to 25.0 ± 25.1%, p=0.100). Nine patients presented with more than one bleeding site. This denoted a peri-implant mucositis prevalence of 50%, whilst none of the implants presented peri-implantitis. One incidence of minor and major ceramic chipping were reported on 2 out of the 18 crowns, resulting in a prosthetic survival rate of 94.4%. Seventeen patients were highly satisfied with their result. CONCLUSION: Single implant-supported zirconia crowns on TBA displayed: (i) minor number of technical complications, (ii) high prosthetic survival rate, (iii) stable marginal bone level and (iv) high patient satisfaction at 7.5 years. CLINICAL IMPLICATIONS: Titanium base abutments despite their high use in clinical practice, lacked medium- and long-term studies. The presented findings highlight their clinical performance at 7.5 years as they display satisfying radiographic, clinical and patient-related outcomes. TBA appear to be a suitable abutment choice for medium-term implant-supported restorations.

A 7.5-year randomized controlled clinical study comparing cemented and screw-retained one-piece zirconia-based implant-supported single crowns.

OBJECTIVES: To compare marginal bone levels, biological, and technical outcomes of screw-retained versus cemented all-ceramic implant-supported zirconia-based single crowns after an observation period of 7.5 years. METHODS: Forty-four single implants in the esthetic zone in 44 patients (22 females, 22 males) were randomly assigned to two types of restorations: SR (screw-retained); veneered one-piece zirconia abutment and CR (cement-retained); veneered lithium disilicate crown intraorally cemented on a one-piece zirconia abutment. Patients were recalled annually up to 7.5 years and survival rates, biological, and technical parameters assessed. RESULTS: A total of 31 patients attended the 7.5-year follow-up visit (17 SR group, 14 CR group). The survival rate on the restorative level was 77.5% (74.0% CR, 81.0% SR, p = .6399). Median marginal bone loss (MBL) values yielded -0.073 mm (-0.305; 0.238) in the CR and -0.215 mm (-0.500; 0.555) in the SR group (intergroup p = .6194). Mean bleeding on probing (BoP) values were significantly in favor of group SR with 20 ± 17% compared to 40 ± 22% in group CR (p = .011). The overall biological complication rate amounted to 27.5% (42.1% CR, 14.3% SR, p = .0775), whereas the technical complication rate was 32.5% (42.1% CR, 23.8% SR, p = .314). In total, CR restorations showed significantly more complications (84.2% for CR, 38.1% for SR, p = .0041). CONCLUSION: One-piece zirconia-based single crowns on two-piece dental implants exhibited a high rate of technical and biological complications at 7.5 years of follow-up. Cemented restorations revealed significant higher rates of bleeding on probing and total complications compared to screw-retained restorations.

3D surface defect map for assessing buccolingual profile of single tooth gaps following alveolar ridge preservation.

AIM: A new, non-invasive approach suggests using single intraoral optical scanning to analyze the ridge profile of single-tooth gaps following alveolar ridge preservation in the absence of a baseline scan. This method involves creating a three-dimensional (3D) surface map to identify and assess contour changes and ridge profiles based on the adjacent teeth. MATERIALS AND METHODS: The present study was designed as a cross-sectional pilot analysis on a convenience sample of patients undergoing alveolar ridge preservation. Intraoral optical scans were taken on 23 patients, capturing data from 30 edentulous sites. The digital models were then imported into an image analysis software for a 3D surface defect map analysis performed by one examiner. This analysis characterized the buccolingual profile of the single tooth gap relative to the adjacent teeth. 10 linear divergence points, spaced 0.5 mm apart in a corona-apical direction, were identified at the midfacial aspect of the sites. Based on these points the sites were plotted and grouped in three different buccolingual profiles (linear, concave, and convex). Clinical parameters including Keratinized mucosa Width (KMW), and soft tissue phenotype with Colorvue biotype probes were also recorded. RESULTS: Three different buccolingual patterns (linear, convex, and concave) were identified. Seven sites exhibited a linear profile, 10 sites displayed a concave shape, and 13 showed a convex profile. The linear profile had surface discrepancies similar to the neighboring teeth. In contrast, the convex profile revealed mid-buccal discrepancy localized only at the crestal aspect, while the concave had an extended divergence ranging from 1 to 5 mm below the soft tissue margin. Univariate and multiple logistic regression analyses did not reveal any statistically significant variables influencing profilometric analysis; however, when combining phenotype and KMW, thick phenotypes demonstrated a higher proportion of concavity (OR = 4.83) compared to thin ones, suggesting a significant trend. With every 1 mm of increase in KMW, the probability of showing a concavity decreased (p = 0.057). CONCLUSION: A 3D surface defect map represents a useful tool for objectively quantifying ridge defects and profiles by assessing profilometric and surface differences compared to adjacent dentition using a single intraoral scan. This method also indicates that KMW may play a critical role in preventing concavity defects. The 3D defect map can guide decision-making during soft tissue augmentation procedures by emphasizing the specific location of the defect and providing more detailed insights into its localization. These parameters can enable the tailoring of flap management and soft tissue grafting strategies to address the patient's individual needs.

Clinical, radiographic and patient-reported outcomes of zirconia and titanium implants in the posterior zone after 1 year of loading-A randomized controlled trial.

OBJECTIVE: To assess the clinical, radiographic and patient-reported outcomes (PROMs) of posterior zirconia and titanium implants at 1 year of implant loading. MATERIALS AND METHODS: Forty-two patients with two adjacent missing teeth were enrolled in a randomized controlled trial with a within-subject controlled design. Each patient received one zirconia (Zr) and one titanium (Ti) implant, with the mesial and distal positions randomized. The implant restoration consisted of multiple layered zirconia, with the buccal aspect veneered. In group Zr, the restoration was intraorally cemented onto the one-piece Zr implant, whereas in group Ti, the restoration was extraorally cemented onto the titanium base abutment and intraorally screw-retained onto the Ti implant. Examinations were performed following restoration delivery at baseline (BL) and at 1 year. Measurements included clinical parameters, radiographic outcomes (MBL) and PROMs. RESULTS: Bleeding on probing showed an increase from BL to 1 year (34 ± 30% for Zr; 25 ± 21% for Ti). MBL remained stable with minimal changes from BL to 1 year, measuring 0.1 ± 0.4 mm (mean ± SD) for Zr and -0.1 ± 0.7 mm for Ti. Veneering fractures were the most frequent technical complication and amounted to 17.5% in group Zr and 5% in group Ti (p = .100). Patients preferred Zr implants for their soft tissue color, with a significant difference in perception between patients and clinicians (p < .017). CONCLUSION: The study showed that both Zr and Ti implants had similar clinical outcomes, despite a high prevalence of mucositis and a few technical complications. Both implant types demonstrated stable marginal bone levels and similar patient-reported outcome measures.

Effect of Membrane Fixation and the Graft Combinations on Horizontal Bone Regeneration: Radiographic and Histologic Outcomes in a Canine Model.

The aim of this study was to determine the effect of membrane fixation and combinations of bone substitute materials and barrier membranes on horizontal bone regeneration in peri-implant defects. Eight mongrel dogs underwent chronic buccal peri-implant dehiscence defects creation and were randomized into 4 groups: (a) deproteinized bovine bone mineral 1 (DBBM1) with a native collagen membrane (CM) (BB group, positive control group), (b) DBBM1 with native CM and 2 fixation pins (BBP group), (c) DBBM2 with a cross-linked CM (XC group), and (d) DBBM2 with cross-linked CM and 2 fixation pins (XCP group). Following 16 weeks of healing, tissues were radiographically and histomorphometrically analyzed. The total augmented area was significantly larger in the BBP, XC, and XCP groups compared to the BB group (4.27 ± 3.21, 7.17 ± 7.23, and 6.91 ± 5.45 mm2 versus 1.35 ± 1.28 mm2, respectively; P = 0.022). No significant difference for the augmented tissue thickness was observed among the 4 groups. The augmented tissue thickness measured at 3 mm below the implant shoulder was higher in BBP, XC, and XCP than that in BB (2.43 ± 1.53, 2.62 ± 1.80, and 3.18 ± 1.96 mm versus 0.80 ± 0.90 mm, respectively), trending toward significance (P = 0.052). DBBM2 and a cross-linked CM were significantly more favorable for horizontal bone regeneration compared to DBBM1 and a native CM. However, when DBBM1 and a native CM were secured with fixation pins, outcomes were similar. The addition of pins did not lead to more favorable outcomes when a cross-linked CM was used.

Does an untreated peri-implant dehiscence defect affect the progression of peri-implantitis?: A preclinical in vivo experimental study.

OBJECTIVE: To investigate the early impact of plaque accumulation in a buccal dehiscence defect on peri-implant marginal bone resorption. MATERIALS AND METHODS: In six male Mongrel dogs, four dental implants were placed in the posterior maxilla on both sides (two implants per side). Based on the group allocation, each implant was randomly assigned to one of the following four groups to decide whether buccal dehiscence defect was prepared and whether silk ligation was applied at 8 weeks post-implant placement for peri-implantitis induction: UC (no defect without ligation); UD (defect without ligation); LC (no defect with ligation); and LD (defect with ligation) groups. Eight weeks after disease induction, the outcomes from radiographic and histologic analyses were statistically analyzed (p < .05). RESULTS: Based on radiographs, the exposed area of implant threads was smallest in group UC (p < .0083). Based on histology, both the distances from the implant platform to the first bone-to-implant contact point and to the bone crest were significantly longer in the LD group (p < .0083). In the UD group, some spontaneous bone fill occurred from the base of the defect at 8 weeks after implant placement. The apical extension of inflammatory cell infiltrate was significantly more prominent in the LD and LC groups compared to the UC group (p < .0083). CONCLUSION: Plaque accumulated on the exposed implant surface had a negative impact on maintaining the peri-implant marginal bone level, especially when there was a dehiscence defect around the implant.

Enhancing guided bone regeneration with cross-linked collagen-conjugated xenogeneic bone blocks and membrane fixation: A preclinical in vivo study.

OBJECTIVE: To determine whether combining cross-linked (CL) collagen-integrated xenogeneic bone blocks stabilized with the fixation of resorbable collagen membranes (CM) can enhance guided bone regeneration (GBR) in the overaugmented calvarial defect model. MATERIALS AND METHODS: Four circular defects with a diameter of 8 mm were prepared in the calvarium of 13 rabbits. Defects were randomly assigned to receive one of the following treatments: (i) non-cross-linked (NCL) porcine-derived collagen-embedded bone block covered by a CM without fixation (NCL + unfix group); (ii) NCL bone block covered by CM with fixation using bone-tack (NCL + fix group); (iii) cross-linked (CL) porcine-derived collagen-embedded bone block covered by CM without fixation (CL + unfix group); and (iv) CL bone block covered by CM with fixation using bone-tack fixation (CL + fix group). The efficacy of GBR was assessed through histological and molecular analyses after 2 and 8 weeks. RESULTS: At 2 weeks, there were no significant differences in histologically measured areas of newly formed bone among the groups. At 8 weeks, however, the CL + fix group exhibited a larger area of new bone (5.08 ± 1.09 mm2, mean ± standard deviation) compared to the NCL + unfix (1.62 ± 0.42 mm2; p < .0083), NCL + fix (3.97 ± 1.39 mm2) and CL + unfix (2.55 ± 1.04 mm2) groups. Additionally, the expression levels of tumour necrosis factor-alpha, fibroblast growth factor-2, vascular endothelial growth factor, osteocalcin and calcitonin receptor were significantly higher in the CL + fix group compared to the other three groups (p < .0083). CONCLUSION: Cross-linked bone blocks stabilized with collagen membrane fixation can significantly enhance GBR.

Effects of implant placement timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical canine model.

AIM: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model. MATERIALS AND METHODS: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively. RESULTS: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder. CONCLUSIONS: CTG generally led to greater tissue thickness than VCMX.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Impact of keratinized mucosa on implant-health related parameters: A 10-year prospective re-analysis study.

AIM: To investigate whether the lack of keratinized mucosa (KM) affects peri-implant health after 10 years of loading. MATERIALS AND METHODS: Data from 74 patients with 148 implants from two randomized controlled studies comparing different implant systems were included and analyzed. Clinical parameters including bleeding on probing (BOP), probing depth (PD), plaque index, marginal bone loss (MBL), and KM width (KMW) at buccal sites were collected at baseline (time of the final prosthesis insertion), 5-year and 10 years postloading. Multivariable logistic and linear regression models by means of a generalized estimated equation (GEE) were used to evaluate the influence of buccal KM on peri-implant clinical parameters; BOP, MBL, PD, and adjusted for implant type (one-piece or two-piece) and compliance. RESULTS: A total of 35 (24.8%) implants were healthy, 67 (47.5%) had mucositis and 39 (27.6%) were affected by peri-implantitis. In absence of buccal KM (KM = 0 mm), 75% of the implants exhibited mucositis, while in the presence of KM (KMW >0 mm) 41.2% exhibited mucositis. Regarding peri-implantitis, the corresponding percentages were 20% (KM = 0 mm) and 26.7% (KM >0 mm). Unadjusted logistic regression showed that the presence of buccal KM tended to reduce the odds of showing BOP at buccal sites (OR: 0.28 [95% CI, 0.07 to 1.09], p = 0.06). The adjusted logistic regression model revealed that having buccal KM (OR: 0.21 [95% CI, 0.05 to 0.85], p = 0.02) and using two-piece implants (OR: 0.34 [95% CI, 0.15 to 0.75], p = 0.008) significantly reduced the odds of showing BOP. Adjusted linear regression by means of GEE showed that KM and two-piece implants were associated with reduced MBL and MBL changes (p < 0.05). CONCLUSION: The lack of buccal KM appears to be linked with peri-implant parameters such as BOP and MBL, but the association is weak. The design of one-piece implants may account for their increased odds of exhibiting BOP.

Augmentation of keratinized tissue using autogenous soft-tissue grafts and collagen-based soft-tissue substitutes at teeth and dental implants: Histological findings in a pilot pre-clinical study.

AIM: To histomorphometrically assess three treatment modalities for gaining keratinized tissue (KT) at teeth and at dental implants. MATERIALS AND METHODS: In five dogs, the distal roots of the mandibular second, third and fourth premolars were extracted. Dental implants were placed at the distal root areas 2 months later. After another 2 months, KT augmentation was performed at both distal (implants) and at mesial root (teeth) areas in the presence (wKT groups) or absence (w/oKT groups) of a KT band at the mucosal/gingival level. Three treatment modalities were applied randomly: apically positioned flap only (APF), free gingival grafts (FGGs) and xenogeneic collagen matrices (XCMs). A combination of the above produced six groups. Two months later, tissue sections were harvested and analysed histomorphometrically. RESULTS: The median KT height and length were greatest at implants with FGG in both wKT (3.7 and 5.1 mm, respectively) and w/oKT groups (3.7 and 4.6 mm), and at teeth with FGG in wKT groups (3.7 and 6.1 mm) and with APF in the w/oKT groups (3.9 and 4.4 mm). The XCM and APF produced more favourable results at teeth than at implants. CONCLUSIONS: FGG was advantageous in gaining KT, especially at implants.

Randomized controlled multi-centre study comparing shorter dental implants (6 mm) to longer dental implants (11-15 mm) in combination with sinus floor elevation procedures: 10-year data.

AIM: To compare implant survival and complication rates between shorter and standard-length implants with sinus augmentation and restored with single crowns, at 10 years of loading. MATERIALS AND METHODS: One-hundred and one patients (137 implants) with a ridge height of 5-7 mm in the posterior maxilla were randomly assigned to two treatment modalities: shorter implants (6 mm) (group short [GS]) or standard-length implants (11-15 mm) with sinus grafting (group graft [GG]). Following the insertion of final restorations, patients were regularly recalled for up to 10 years. Assessed outcomes encompassed implant survival, marginal bone levels (MBLs), biological and technical parameters and patient-reported outcome measures (OHIP-49 = Oral Health Impact Profile). Non-parametric statistical analysis was used to analyse the data. RESULTS: For the 5- to 10-year follow-up period, 77 patients with 105 implants (GS: 36 patients/48 implants; GG: 41/57) were available for re-examination (drop-out rate 21%). Implant survival rates at the patient level were 96.0% (GS; 2 failures) and 100% (GG) (inter-group p = .24). Median MBLs amounted to 0.00 mm (min 0.00; max 3.25; GS) and 0.00 mm (min 0.00; max 4.55; GG) (inter-group p = .73). Technical complications predominantly occurred within the first 5 years (inter-group p > .05). Peri-implantitis rates were 4.2% (GS) and 13.3% (GG) (intergroup p = .37). Median OHIP-49 scores were 7.00 (0.00; 39.00; GS) and 9.00 (0.00; 196; GG) (inter-group p = .61) at 10 years. CONCLUSIONS: Based on similar 10-year implant survival rates, reduced patient morbidity and lower costs, the use of shorter dental implants might well serve as an alternative treatment concept to longer implants placed in conjunction with sinus grafting for patients with a limited ridge height in the posterior maxilla. Study register: https://clinicaltrials.gov/ct2/show/NCT01030523.

Clinical and histological wound healing patterns of collagen-based substitutes: An experimental randomized controlled trial in standardized palatal defects in humans.

AIM: To evaluate the progression of wound healing of standardized palatal defects in groups using three different collagen-based wound dressings and a control group, in terms of wound closure, pain perception and descriptive histology. MATERIALS AND METHODS: Twenty participants were enrolled in this experimental study, in whom four palatal defects were created. The defects (6 mm diameter, 3 mm depth) were randomly assigned to one of four treatment modalities: C (control), MG (Mucograft®), MD (mucoderm®) and FG (Fibro-Gide®). Photographs were taken, and pain assessment was performed before and after treatment and at 5, 7, 9, 12, 14 and 16 days after surgery. All participants wore a palatal splint for a duration of 16 days. RESULTS: All groups achieved complete wound closure at 14 days. The percentage of the remaining open wound on day 7 amounted to 49.3% (C; interquartile range [IQR]: 22.6), 70.1% (FG; IQR: 20.7), 56.8% (MD; IQR: 26.3) and 62.2% (MG; IQR: 34.4). Statistically significant differences were found between FG and C (p =.01) and between MD and FG (p =.04). None of the participants rated pain higher than 4 out of 10 during the entire study period. CONCLUSIONS: Collagen-based wound dressings provide coverage of open defects, albeit without acceleration of wound closure or reduction of pain. FG (which is not intended for open oral wounds) showed slower wound closure compared to C and MD.

Clinical Outcomes of Tooth- and Implant-Supported Restorations Performed in a University-based Undergraduate Program after 13-15 Years.

AIMS: To assess the clinical concept of patient treatment with fixed tooth- and implant-supported restorations in a university-based undergraduate program after 13 - 15 years. METHODS: Thirty patients (mean age 56 years) who had received multiple tooth- and implant-supported restorations were recalled after 13-15 years. The clinical assessment comprised of biological and technical parameters as well as patient satisfaction. Data were analyzed descriptively and the 13-15-year survival rates for tooth- and implant-supported single crowns and fixed dental prostheses were calculated. RESULTS: The survival rate of tooth-supported restorations amounted to 88.3% (single crowns) and 69.6% (fixed dental prostheses); in implants it reached 100% for all types of reconstructions. Overall, 92.4% of all reconstructions were free of technical complications. The most common technical complication was chipping of the veneering ceramic (tooth-supported restorations: 5.5%; implant-supported restorations: 13-15.9%) regardless of the material used. At teeth, increased probing depth ≥5mm was the most frequent biological complication (22.8%), followed by endodontic complications of root-canal treated teeth (14%) and loss of vitality at abutment teeth (8.2%). Peri-implantitis was diagnosed in 10.2% of implants. CONCLUSION: Results of this study indicate that the clinical concept implemented in the undergraduate program and performed by undergraduate students works well. The clinical outcomes are similar to those reported in the literature. In general, the majority of biological complications occurrs in reconstructed teeth, whereas implant-supported restorations are more prone to technical complications.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Survival and complication rates of two dental implant systems supporting fixed restorations: 10-year data of a randomized controlled clinical study.

OBJECTIVES: To compare clinical, radiographic, biological and technical long-term outcomes of two types of dental implants over a period of 10 years. MATERIALS AND METHODS: Ninety-eight implants were placed in 64 patients, randomly allocated to one of two manufacturers (AST and STM). All implants were loaded with fixed restorations. Outcome measures were assessed at implant insertion (Ti), at baseline examination (TL), at 1, 3, 5, 8 and 10 (T10) years. Data analysis included survival, bone level changes, complications and clinical measures. RESULTS: Re-examination was performed in 43 patients (23 AST and 20 STM) at 10 years. The implant level analysis was based on 37 (AST) and 32 (STM) implants. Survival rates of 100% were obtained for both groups. The median changes of the marginal bone levels between baseline and T10 (the primary endpoint) amounted to a loss of 0.07 mm for group AST and a gain of 0.37 mm for group STM (intergroup p = 0.008). Technical complications occurred in 27.0% of the implants in group AST and in 15.6% in group STM. The prevalence of peri-implant mucositis was 29.7% (AST) and 50.1% (STM). The prevalence of peri-implantitis amounted to 0% (AST) and 6.3% (STM). CONCLUSIONS: Irrespective of the implant system used, the survival rates after 10 years were high. Minimal bone level changes were observed, statistically significant but clinically negligible in favor of STM. Technical complications were more frequently encountered in group AST, while group STM had a higher prevalence of peri-implant mucositis.

Stromal cells associated with soft tissue augmentation by a volume stable collagen matrix (VCMX) are predominated by anti-inflammatory/reparative macrophages.

Aim: To define immunophenotypes of stromal inflammatory and endothelial cells and fibroblasts 3-months post-augmentation of the peri-implant soft tissue using a porcine cross-linked collagen matrix (VCMX). Methods: Peri-implant soft tissue samples were obtained from 12 patients at the lining mucosa (LM) - masticatory mucosa (MM) junction, before and at 3-months post-augmentation. Immunohistochemical stains for identification of inflammatory cells [T (CD3) and B (CD20) lymphocytes, plasma cells (CD138)], macrophages (CD68-pro-inflammatory, CD163-anti-inflammatory/reparative), endothelial cells (CD31, CD34) and fibroblasts (CD90, TE-7), were performed. Differences in the mean positively-stained cells pre- and post-augmentation was analyzed by Wilcoxon Signed-Rank Test. Results: CD31+ endothelial cells showed increased mean numbers in MM2 compared to MM1 (p=0.025) and in LM2 compared to LM1 (p=0.047). CD163+ anti-inflammatory macrophages showed mean numbers in MM2 higher than MM1 (p=0.021) and in LM2 than LM1 (p=0.012). All other cell phenotypes showed insignificant changes between pre- and post-augmentation. Conclusion: This molecular study provided novel insight on the frequency of phenotypes of stromal cells in the wound healing process 3-months post-augmentation with VCMX, with anti-inflammatory CD163+ macrophages being predominant. This should be further investigated in order to find novel therapeutic approaches to modulate and promote the VCMX-related healing process.

Early implant placement in sites with ridge preservation or spontaneous healing: histologic, profilometric, and CBCT analyses of an exploratory RCT.

PURPOSE: The aim of this study was to compare changes in soft and hard tissue and the histologic composition following early implant placement in sites with alveolar ridge preservation or spontaneous healing (SH), as well as implant performance up to 1 year after crown insertion. METHODS: Thirty-five patients with either intact buccal bone plates or dehiscence of up to 50% following single-tooth extraction of incisors, canines, or premolars were included in the study. They were randomly assigned to undergo one of three procedures: deproteinized bovine bone mineral with 10% collagen (DBBM-C) covered by a collagen matrix (DBBM-C/CM), DBBM-C alone, or SH. At 8 weeks, implant placement was carried out, and cone-beam computed tomography scans and impressions were obtained for profilometric analysis. Patients were followed up after the final crown insertion and again at 1 year post-procedure. RESULTS: Within the first 8 weeks following tooth extraction, the median height of the buccal soft tissue contour changed by -2.11 mm for the DBBM-C/CM group, -1.62 mm for the DBBM-C group, and -1.93 mm for the SH group. The corresponding height of the buccal mineralized tissue changed by -0.27 mm for the DBBM-C/CM group, -2.73 mm for the DBBM-C group, and -1.48mm for the SH group. The median contour changes between crown insertion and 1 year were -0.19 mm in the DBBM-C/CM group, -0.09 mm in the DBBM-C group, and -0.29 mm in the SH group. CONCLUSIONS: Major vertical and horizontal ridge contour changes occurred, irrespective of the treatment modality, up to 8 weeks following tooth extraction. The DBBM-C/CM preserved more mineralized tissue throughout this period, despite a substantial reduction in the overall contour. All 3 protocols led to stable tissues for up to 1 year.

Efficacy of a collagen matrix for soft tissue augmentation after implant placement compared to connective tissue grafts: A multicenter, noninferiority, randomized controlled trial.

OBJECTIVES: To test whether soft tissue volume augmentation using a collagen matrix (VCMX) leads to noninferior results in terms of gain of mucosal thickness at single implant sites, compared to connective tissue grafts (SCTG). METHODS: The study was designed as a multi-center randomized controlled clinical trial. Subjects in need of soft tissue volume augmentation at single tooth implant sites were consecutively recruited at nine centers. The deficient mucosal thickness at the implant sites (one per patient) was augmented by applying either a VCMX or a SCTG. Patients were examined at 120 days (abutment connection = primary endpoint), 180 days (final restoration), and 360 days (1-year after insertion of the final restoration). Outcome measures included: transmucosal probing of the mucosal thickness (crestal = primary outcome), profilometric measurements of the tissue volume, and patient-reported outcome measures (PROMs). RESULTS: Out of the 88 patients, 79 attended the one-year follow-up. The median increase of the crestal mucosal thickness between pre-augmentation and 120 days was 0.3 ± 2.1 mm in the VCMX group and 0.8 ± 1.6 mm in the SCTG group (p = .455). Non-inferiority of the VCMX compared to the SCTG was not observed. The respective numbers at the buccal aspect amounted to 0.9 ± 2.0 mm (VCMX) and 1.1 ± 1.4 mm (SCTG; p = .431). PROMs including pain perception favored the VCMX group. CONCLUSION: It remains inconclusive whether soft tissue augmentation using a VCMX is noninferior to SCTG in terms of crestal mucosal thickening at single implant sites. However, the use of collagen matrices favors PROMs especially pain perception, while achieving similar buccal volume gains along with comparable clinical and aesthetic parameters to SCTG.

The 3D emergence profile on implant-supported restorations: A method for evaluating restorative angles.

STATEMENT OF PROBLEM: Emerging evidence indicates that the emergence profile and subsequent restorative angle play a crucial role in clinical outcomes and can potentially affect the development and progression of peri-implant diseases. However, the traditional evaluation of the emergence profile and angle has been limited to mesial and distal sites using periapical x-rays, without considering the buccal sites. PURPOSE: To describe a novel 3D method to estimate the emergence profile and restorative angles around single implant-supported crowns including buccal sites. MATERIALS AND METHODS: A total of 30 implant-supported crowns (11 molars, 8 premolars, 8 central incisors and 1 canine) were extra-orally scanned using an intraoral scanner and the STL files produced were imported into a 3D software. The crown/abutment interface of each crown was delineated, and apico-coronal lines were automatically drawn following the shape of the crown. Three reference points were defined on the apico-coronal lines at the transition edge of the biological (BC) and the esthetic zone (EC) and the resulting angles were then calculated. The reliability of the measurements (2D and 3D) were assessed using the intraclass correlation coefficient (ICC). RESULTS: In anterior restorations, the mean angle of the esthetic zone amounted to 162 ± 14° at mesial sites, to 140 ± 10° at buccal sites and to 163 ± 11° at distal sites. The corresponding angles at the biological zones, amounted to 155 ± 13° at mesial sites, 139 ± 15° at buccal sites and 157 ± 5° at distal sites. In posterior restorations, the mean angle of the esthetic zone amounted to 162 ± 12° at mesial sites, to 157 ± 13 at buccal sites and to 162 ± 11 at distal sites. The corresponding angles at the biological zone, amounted to 158 ± 8 at mesial sites, 150 ± 15° at buccal sites and 156 ± 10 at distal sites. The ICC for all measurements ranged between 0.77 and 0.99 indicating a good intra-examiner reliability. CONCLUSION: Within the limitations of the present study, the 3D analysis seems to be a reliable and applicable method for the quantitative evaluation of the emergence profile in daily practice. Future randomized clinical trials are needed to assess whether a 3D analysis with the ensuing the emergence profile serves as a predictor for clinical outcomes. CLINICAL SIGNIFICANCE: The development and implementation of a 3D workflow will provide technicians and dentists with the ability to assess the restorative angle of implant-supported restorations during the provisional phase and the final restoration. This approach may help achieve an aesthetically pleasing restoration while minimizing potential clinical complications.