One-stage prosthodontically driven jaw reconstruction in patients with benign and malignant pathologies: A 7- to 11-year cohort study.

OBJECTIVES: One stage functional jaw reconstruction is defined as the resection and reconstruction of segmental defects in conjunction with the placement of dental implants in an ideal prosthetic position and loaded with a provisional restoration, during one surgical procedure. The aim of the study is to describe clinical outcomes of patients who underwent one stage functional jaw reconstruction. METHODS: Patients who underwent one-stage functional jaw reconstruction, from January 2013 to March 2016 were recalled in 2022 and 2023. Planning and execution for the reconstruction utilized either analogue or digital techniques. Outcome parameters recorded were treatment-related outcomes at patient level, implant-related outcomes and patient-reported outcome measures. RESULTS: Eighteen patients underwent one-stage jaw reconstruction with a total of 57 implants. Four patients had maxillary and 14 had mandibular reconstructions. Ten patients underwent postoperative radiotherapy. Ten patients were planned using analogue and eight by digital planning. Three patients had partial flap necrosis, three patients had plate fractures, implant loss was seen in one patient and four patients died during the period. A functional prosthesis was provided in 16 out of the 18 patients. CONCLUSION: One-stage functional jaw reconstruction is a predictable method for providing rehabilitation with successful outcomes at 7-11 years. However, caution should be exercised when the treatment modality is carried out in patients with malignant pathologies who have undergone radiotherapy.

Intravenous S-ketamine's analgesic efficacy in third molar surgery. A randomized placebo-controlled double-blind clinical trial.

Background: In most cases, a combination of paracetamol and ibuprofen are the optimal treatment for postoperative pain in third molar surgery. If stronger analgesia is required, opioids are traditionally administered. In day-case, surgery; however, opioids should be avoided. Thus, the anaesthetic agent S-ketamine in analgesic doses might be preferred. Methods: The study was designed as a randomized placebo-controlled double-blind clinical trial. The study enrolled healthy subjects according to the American Society of Anaesthesiologists classification; I or II (ASA), aged 18 to 44 years, with a body weight between 50 and 100 kg. The patients were randomized into three groups where two doses of S-ketamine were compared (high: 0.25 mg/kg or low: 0.125 mg/kg) with placebo (saline). Results: A primary outcome of the study was that VAS at 4 h postoperatively, showed no significant difference between the placebo and high-dose S-ketamine group or in the low-dose group. We found a significant difference between the groups for the first 24 h, with a lower VAS-score in the high-dose S-ketamine group. The time to when 50% had taken their first rescue medication was 12 min later in the high-dose ketamine group. Conclusions: Pre-emptive S-ketamine 0.25 mg/kg gave a global significant reduction of pain by VAS during the first 24 h postoperatively. The time from end of surgery to first rescue medication were longer in the high-dose ketamine group compared to both low-dose ketamine and placebo groups.

Oral and maxillofacial surgeons' views on the adoption of additive manufacturing: findings from a nationwide survey.

OBJECTIVES: Hospitals in many European countries have implemented Additive Manufacturing (AM) technology for multiple Oral and Maxillofacial Surgery (OMFS) applications. Although the technology is widely implemented, surgeons also play a crucial role in whether a hospital will adopt the technology for surgical procedures. The study has two objectives: (1) to investigate how hospital type (university or non-university hospital) influences surgeons' views on AM, and (2) to explore how previous experience with AM (AM experience or not) influences surgeons' views on AM. MATERIALS AND METHODS: An online questionnaire to capture surgeons' views was designed, consisting of 11 Likert scale questions formulated according to the Consolidated Framework for Implementation Research (CFIR). The questionnaire was sent to OMF surgeons through the channel provided by the Association of Oral and Maxillofacial Surgery in Sweden. Data were analyzed using the Mann-Whitney U test to identify significant differences among OMF surgeons in terms of organizational form (i.e., university hospital or non-university hospital) and experience of AM (i.e., AM experience or no-experience). RESULTS: In total, 31 OMF surgeons responded to the survey. Views of surgeons from universities and non-universities, as well as between surgeons with experience and no-experience, did not show significant differences in the 11 questions captured across five CFIR domains. However, the "individual characteristics" domain in CFIR, consisting of three questions, did show significant differences between surgeons' experience with AM and no-experience (P-values: P = 0.01, P = 0.01, and P = 0.04). CONCLUSIONS: Surgeons, whether affiliated with university hospitals or non-university hospitals and regardless of their prior experience with AM, generally exhibit a favorable attitude towards AM. However, there were significant differences in terms of individual characteristics between those who had prior experience with AM and those who did not. CLINICAL RELEVANCE: This investigation facilitates the implementation of AM in OMFS by reporting on the views of OMF surgeons on AM.

Adoption of additive manufacturing in oral and maxillofacial surgery among university and non-university hospitals in Sweden: findings from a nationwide survey.

PURPOSE: Additive manufacturing (AM) is an innovative printing technology that can manufacture 3-dimensional solid objects by adding layers of material from model data. AM in oral and maxillofacial surgery (OMFS) provides several clinical applications such as surgical guides and implants. However, the adoption of AM in OMFS is not well covered. The purpose was to study the adoption of AM in OMFS in university and non-university hospitals in Sweden. Three research questions were addressed: What is the degree of using AM solutions in university and non-university hospitals?; What are AM solutions used?; How are the AM solutions accessed (production mode) in university hospitals and non-university hospitals? METHODS: A survey was distributed to OMF surgeons in Sweden. The questionnaire consisted of 16 questions. Data were analyzed through descriptive and content analysis. RESULTS: A total of 14 university and non-university hospitals were captured. All 14 hospitals have adopted AM technology and 11 of the hospitals adopted AM in OMFS. Orthognathic and trauma surgery are two major types of surgery that involve AM technology where material extrusion and vat polymerization are the two most used AM technologies in OMFS. The primary application of AM was in medical models and guides. CONCLUSION: Majority of Swedish university hospitals and non-university hospitals have adopted AM in OMFS. The type of hospital (university or non-university hospital) has no impact on AM adoption. AM in OMFS in Sweden can be perceived to be a mature clinical application.

Quantification of Bone Height and Bone Volume Around Dental Implants After Open Maxillary Sinus Elevation Surgery Using CBCT.

Purpose: To assess, using CBCT, the volume and height of bone formation after open maxillary sinus elevation without the use of grafts. Materials and Methods: The study was retrospective and included 24 patients with a total of 67 implants. CBCT examinations were conducted at baseline (0 to 43 days postsurgery) and after an average healing period of 6.2 months (range: 5.1 to 7.8 months). The image analysis included metal artifact reduction, registration, and a standardized protocol for segmenting the anatomical structures of the maxillary sinus, including calculating the 3D volumetric changes after bone formation. Conventional manual 2D measurement of vertical bone formation was executed for comparison. Clinical factors assumed to be relevant for bone formation were obtained from patient medical records. Results: One implant was lost before prosthetic loading, representing an early implant loss rate of 1.5%. Differences in intra- and interexaminer reproducibility were registered for the conventional 2D method (P < .05). The average vertical bone formation measured with the 2D method was 4.8 mm (4.6 to 5.0 mm), covering 60.2% of the implant height within the sinus. The average volumetric bone formation measured with the developed 3D image-analysis method was 801 mm3 in total and 195 mm3 in a restricted region around each implant. Bone formation was registered in 62% of the volume of the restricted region. A correlation regarding bone formation was found between the two methods (R2 = 0.705). Clinical factors such as age, smoking, general health, and postoperative complications did not correlate with the amount of bone formed. Conclusion: CBCT image analysis is a promising method for objective 3D evaluation of bone formation after sinus elevation. A correlation was seen between the manually measured bone height (2D) and the bone volume in a restricted region around each implant using the developed method (3D). Reducing visual interpretation minimizes errors related to examiner reliability. Clinical factors did not significantly affect the volumetric bone formation.

Oral manifestations and dental considerations of patients with hereditary hemorrhagic telangiectasia: a scoping review.

OBJECTIVE: We examined the range, nature, and extent of research conducted regarding the oral and dental implications of hereditary hemorrhagic telangiectasia (HHT) to identify gaps in the research and knowledge of the field. STUDY DESIGN: We performed a scoping review according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews and 2017 Guidance for the Conduct of Joanna Briggs Institute Scoping Reviews. We searched the MEDLINE and Web of Science databases for all full-text articles published in English from December 1946 to October 2022. RESULTS: We identified 103 articles describing oral and dental considerations of patients with HHT, primarily case reports. Most reported oral telangiectasias of the tongue, lips, and palate. Many reported management of bleeding and the use or recommendation of prophylactic antibiotics before dental procedures. CONCLUSIONS: Oral telangiectasias are commonly found in patients with hereditary hemorrhagic telangiectasia, and dental professionals may be the first to diagnose it in their patients. Early detection and diagnosis are important to prevent potentially fatal outcomes, and prophylactic antibiotics before procedures may be warranted.

Factors Affecting Complete Oral Rehabilitation in Patients With Vascularized Free Fibula Flap Mandibular Reconstruction: A 10-Year Retrospective Study.

The fibula is the preferred bone flap for mandibular reconstructions due to its many advantages, including the possibility to insert dental implants. All patients who received a mandibular reconstruction with a vascularized free fibula flap at the Uppsala University Hospital between 2009 and 2019 were retrospectively examined regarding the proportion of implant insertion and factors that affected implant outcome. Forty-one patients had 42 fibula flap reconstructions. Eleven patients (27%) received dental implants and 8 (20%) completed dental rehabilitation. Patient death and cancer recurrence were the main reasons for not receiving implants. The survival rates of implants placed in irradiated and nonirradiated fibulas were 15% and 76%, respectively. Less than 20% of reconstructed patients received an implant-supported prosthesis. Implants placed in an irradiated fibula should be considered at high risk for implant loss.

Early Second Free Flap is Required in Osteoradionecrosis-related Nonunion after Primary Mandible Reconstruction.

Osteoradionecrosis (ORN) manifested as symptomatic nonunion between primary free flap and native mandible after primary bony reconstruction of the mandible is an entity not included in current conventional ORN staging guidelines. This article reports on and proposes early management of this debilitating condition using a chimeric scapular tip free flap (STFF). Methods: A retrospective review was performed examining cases with bony nonunion at the junction of primary free fibula flap (FFF) and native mandible at a single center over a 10-year duration, which required a second free bone flap. Details of each case (patient demographics, oncological details, primary surgery, presentation, and secondary surgery) were documented and analyzed. Outcomes of the treatment were assessed. Results: Four patients (two men and two women; age range, 42-73 years) out of a total of 46 primary FFF were identified. All patients presented with symptoms of low-grade ORN and radiological signs of nonunion. All cases were reconstructed with chimeric STFF. The duration of follow-up ranged from 5 to 20 months. All patients reported resolution of symptoms and radiological evidence of union. Two of four patients subsequently received osseointegrated dental implants. Conclusions: Institutional rate of nonunion after primary FFF requiring a second free bone flap is 8.7%. All the patients of this cohort presented with a similar clinical entity easily discounted as an infected nonunion postosseous flap reconstruction. There is no ORN grading system that currently guides the management of this cohort. Good outcomes are possible with early surgical intervention with a chimeric STFF.

Bone formation beyond the skeletal envelope using calcium phosphate granules packed into a collagen pouch-a pilot study.

In this proof-of-concept, bone neoformation beyond the skeletal envelope is explored by using a collagen pouch (n= 6) packed with calcium phosphate (CaP) granules placed over the frontal bone in sheep (n= 3). At 13 weeks, macroscopic examination showed specimens covered by an adherent fibrinous envelope with slight vascularization. Histology revealed colonization of the implant by newly formed woven bone and fibrous connective tissue. Surface osteoblasts as well as material-filled macrophages, lymphocytes, polymorphonuclear cells and giant cells were also found in large quantities surrounding the newly formed bone tissue inside the collagen pouch. On the side facing the recipient bone, the collagen membrane had to a large extent been resorbed and bridging bone formation was clearly visible between the test article and recipient bone. On the other side facing soft tissue, the collagen pouch remained intact with a visible fibrous capsule. This study demonstrated that the use of a collagen sleeve as a container for CaP granules allows for good neoformation beyond the skeletal envelope with bridging bone formation clearly visible between the test article and recipient bone. Additionally, in this model, macrophages rather than osteoclasts appear to modulate CaP granule resorption and remodeling into new bone. This construct opens new perspectives for treatment methods that could be used for bone augmentation and restoration of cranio-maxillofacial defects and malformations.

Brachytherapy and osteoradionecrosis in patients with base of tongue cancer.

BACKGROUND: Base of tongue cancer incidence and patient survival is increasing why treatment sequelae becomes exceedingly important. Osteoradionecrosis (ORN) is a late adverse effect of radiotherapy and brachytherapy (BT) could be a risk factor. Brachytherapy is used in three out of six health care regions in Sweden. AIMS: Investigate if patients treated in regions using BT show an increased risk for ORN and whether brachytherapy has any impact on overall survival. MATERIAL AND METHODS: We used data from the Swedish Head and Neck Cancer Register between 2008-2014. Due to the nonrandomized nature of the study and possible selection bias we compared the risk for ORN in brachy vs non-brachy regions. RESULTS: Fifty out of 505 patients (9.9%) developed ORN; eight of these were treated in nonbrachy regions (16%), while 42 (84%) were treated in brachy regions. Neither age, sex, TNM-classification/stage, p16, smoking, neck dissection, or chemotherapy differed between ORN and no-ORN patients. The risk for ORN was significantly higher for patients treated in brachy regions compared to non-brachy regions (HR = 2,63, p = .012), whereas overall survival did not differ (HR = 0.95, p = .782). CONCLUSIONS AND SIGNIFICANCE: Brachytherapy ought to be used cautiously for selected patients or within prospective randomized studies.

In vivo trueness and precision of full-arch implant scans using intraoral scanners with three different acquisition protocols.

OBJECTIVES: To evaluate an in situ reference acquisition method for implant positions in complete edentulous maxillae using an industrial scanner and allowing for in vivo trueness analysis of the restorative workflow. To assess in vivo trueness and precision of intraoral scanners (IOS) using different acquisition protocols. Furthermore, to compare IOS trueness with impression-based models and implant-supported fixed dentures (IFD) in a parallel study on the same cohort using the same in situ reference scan. METHODS: Six scan-bodies mounted to maxillary implants in five subjects were reference scanned (REF) using an industrial scanner. Subjects were scanned with IOS three times using three different protocols: control (CT), dental floss assisted (DF), and acrylic splint (SP). CAD-files of scan-bodies with inter-aligned analogues were geometry-aligned to REF, and SP. Scan-bodies were aligned to CT and DF in proprietary dental laboratory software and exported with analogue positions. Resulting six CAD-analogues per scan were Globally Aligned using a consistent geometry-based alignment. Deviations were computed after a Reference Point System Alignment at the implant/prosthetic platform for Cartesian axes with a linear Resultant. RESULTS: Resultant trueness was CT: 41±11 µm, DF: 49±22 µm, SP: 55±8 µm. Resultant precision was CT: 48±7 µm, DF: 50±7 µm, SP: 45±6 µm. CONCLUSIONS: This method is applicable for assessing trueness of maxillary full-arch implant scans in vivo. The CT protocol was most accurate. CT trueness showed no difference to digitised impression-based models in parallel study. CT was more accurate than IFD in a parallel study. CT displayed similar numerical trueness as existing in vitro studies. CLINICAL SIGNIFICANCE: Using IOS to acquire full-arch implant scans is controversial. The modified protocol in this pilot shows promising results in the maxilla where great care was taken to manage non-attached tissues when a modified scanning pattern was used. However, other IOS may show varying results in vivo. A completed scan does not necessarily equate to an accurate scan.

Haptic-Assisted Surgical Planning (HASP) in a Case of Bilateral Mandible Fracture.

Restoring normal skeletal anatomy in patients with complex trauma to the mandible can be difficult, the difficulty often increasing with an edentulous mandible. This study describes a case of a displaced edentulous bilateral mandibular fracture, which was preoperatively planned with the in-house haptic-assisted surgery planning system (HASP). A model of the virtually restored mandible was 3D-printed at the hospital and a reconstruction plate was outlined beforehand with the printed mandible as a template and served as a guide during surgery. This case suggests HASP as a valuable preoperative tool in the planning phase when dealing with maxillofacial trauma cases. With the application of virtual planning, the authors could analyze the desired outcome and were further supported in surgery by the guidance of the reconstruction plate outlined on the restored model of the mandible.

In vivo trueness of full-arch implant-supported CAD/CAM restorations and models based on conventional impressions.

OBJECTIVES: To evaluate a method for in situ reference acquisition of implant positions in complete edentulous maxillae using an industrial scanner. To assess in vivo trueness of full-arch implant-supported fixed dentures (IFD) and dental models based on conventional impressions. METHODS: In five subjects, scan-bodies were mounted to six maxillary implants and scanned three times using an industrial scanner (REF). Original impression-based models used to manufacture existing IFDs, (MOD1), and models fabricated from new polyether impressions, (MOD2), were scanned three times with a laboratory scanner. Scan-bodies were aligned and exported with analogue positions corresponding to implant positions. Implant analogues were mounted onto existing IFDs and scanned three times (BRIDGE). CAD files of scan-bodies with inter-aligned CAD-analogues were geometry-aligned to REF. CAD-analogues were aligned to exported files of MOD1 and MOD2, and to BRIDGE. Resulting six CAD-analogues were Globally Aligned using a consistent geometry-based alignment. Deviations were computed after a Reference Point System Alignment at the implant/prosthetic platform for Cartesian axes and a linear Resultant. RESULTS: REF precision was 9.3 ± 1 µm. In vivo trueness for Resultant was MOD1: 36±16 µm, MOD2: 28±7 µm and BRIDGE: 70±23 µm, where MOD1 and MOD2 were statistically significantly different from BRIDGE. In vitro manufacturing trueness of Resultant when MOD1 acted reference for BRIDGE was: 69 ± 22. CONCLUSIONS: This method can be applied for assessing in vivo trueness. CAD/CAM processed IFD showed deviations twice that of impression-based models, however, errors from impressions and subsequent model scans were not additive to the entire workflow.

[Osler's disease - a disease with a wide variety of clinical manifestations deserving multidisciplinary competence]. / Mångfasetterade morbus Osler kräver multidisciplinär kunskap.

Hereditary haemorrhagic telangiectasia (HHT, Osler disease) is an autosomal dominant disease with a prevalence of about 1 in 5 000. The most common symptom is epistaxis in 90 percent of patients, with an average onset at the age of 12 years. Pulmonary arteriovenous malformations are present in 15-35 percent of patients and are associated with embolic complications, such as stroke and cerebral abscesses.  No causative treatment for HHT exists. Iron deficiency anaemia is a common complication. It is treated with oral or intravenous iron replacement depending on the response to tranexamic acid and local treatments. Bevacizumab has been reported to be effective in reducing bleeding complications as well as hepatic and cardiac failure. A multidisciplinary center for the treatment of HHT was established at the University Hospital in Uppsala in 2009.

Five-Step Scapula Tip Flap Harvesting for Oromaxillofacial Defects Reconstruction.

SUMMARY: In the last 10 years, there has been an increased focus on the scapula tip free flap for head and neck reconstructions. Its several advantages make it a versatile and reliable reconstructive option for patients with orofacial compound defects. The aim of this article is to present a systematic surgical approach for the harvesting of the scapula tip free flap. Herein, a step-by-step surgical approach and some technical tips are described to make the scapula tip flap dissection simpler, safer, and more straightforward.

Mandibular resection in patients with head and neck cancer: acute and long-term complications after reconstruction.

BACKGROUND: The treatment of head and neck cancer is an intensive multimodal treatment that has a great impact on the individual patient. AIMS/OBJECTIVES: This study aimed to evaluate acute and long-term complications associated with mandibular resections and reconstructions. MATERIAL AND METHODS: We retrospectively retrieved data on complications and recurrences among patients that underwent mandibular resections and reconstructions for treating oral cavity cancer (n = 190 patients) and osteoradionecrosis (ORN, n = 72). Reconstructions included composite grafts (n = 177), soft tissue flaps (n = 61), or primary closure without any graft (n = 24). RESULTS: Forty-two patients that underwent reconstructions with composite grafts displayed serious complications (Clavien-Dindo ≥ IIIa). The complication rates were similar between patients treated for oral cavity cancer and patients treated for ORN. Patients that underwent a primary closure without any graft, had a significantly lower risk of complications compared to patients that underwent the other treatments. After hospitalization, 181 patients (69%) had at least one complication. CONCLUSIONS: A majority of patients undergoing resection and reconstruction due to oral cancer/ORN suffered from postoperative complications regardless of indication, comorbidity status or reconstruction technique. The risk of Clavien-Dindo grade IIIa-V events was significantly lower for patients treated with primary closure without grafts. SIGNIFICANCE: The results from this study clarifies the importance of in-depth analyse prior to decision of treatment for patients with head and neck cancer.

Localized IgG4-related disease manifested on the tongue: a case report.

Immunoglobulin G4-related disease (IgG4-RD) is an immune-mediated fibroinflammatory condition that can affect multiple organs. IgG4-RD may show a variety of initial symptoms. In the oral mucosa, lesions present as inflammatory fibrosis with a large number of IgG4-positive plasma cells. Evaluating treatment is a well-known problem in IgG4-RD due to the absence of an established assessment system. There are difficulties in defining the severity of the disease, which is why treatment is primarily based on its clinical manifestations. We present a case report of localized IgG4-RD with ulcerative and proliferative manifestations on the tongue, which clinically mimicked oral squamous cell carcinoma. A tumor-like lesion on the tongue can indicate something else other than the malignant or reactive changes commonly found in the oral mucosa. Multiple differential diagnoses of these atypical oral lesions, including localized IgG4-RD, should be considered.

Evaluation of in-house, haptic assisted surgical planning for virtual reduction of complex mandibular fractures.

PURPOSE: The management of complex mandible fractures, i.e. severely comminuted or fractures of edentulous/atrophic mandibles, can be challenging. This is due to the three-dimensional loss of bone, which limits the possibility for accurate anatomic reduction. Virtual surgery planning (VSP) can provide improved accuracy and shorter operating times, but is often not employed for trauma cases because of time constraints and complex user interfaces limited to two-dimensional interaction with three-dimensional data. METHODS: In this study, we evaluate the accuracy, precision, and time efficiency of the haptic assisted surgery planning system (HASP), an in-house VSP system that supports stereo graphics, six degrees-of-freedom input, and haptics to improve the surgical planning. Three operators performed planning in HASP on computed tomography (CT) and cone beam computed tomography (CBCT) images of a plastic skull model and on twelve retrospective cases with complex mandible fractures. RESULTS: The results show an accuracy and reproducibility of less than 2 mm when using HASP for virtual fracture reduction, with an average planning time of 15 min including time for segmentation in the software BoneSplit. CONCLUSION: This study presents an in-house haptic assisted planning tool for cranio-maxillofacial surgery with high usability that can be used for preoperative planning and evaluation of complex mandible fractures.

Evaluation of upper labial frenectomy: A randomized, controlled comparative study of conventional scalpel technique and Er:YAG laser technique.

OBJECTIVES: Abnormalities in the maxillary frenum may lead to esthetic or functional limitations and need to be corrected with a surgical intervention called frenectomy. The aim of the study was to compare frenectomies performed using Er:YAG laser technology with those using a conventional scalpel technique. Comparisons were of patients' experiences, treatment times, bleeding during treatment and wound healing. MATERIAL AND METHODS: The trial was performed as a prospective, randomized and controlled, single-blind investigation. A total of 40 patients requiring frenectomy were randomly assigned to groups which underwent either conventional or Er:YAG laser treatment. Patients' experiences, treatment time, bleeding and wound healing were evaluated immediately after surgery and 5 days, 12 days and 3 months after surgery. RESULTS: Significant increase in time spent in surgery and bleeding was seen with conventional scalpel surgery. Directly after surgery the wound area was significantly larger in the laser group but at the 5-day evaluation no difference could be observed between the groups. Finally, patients were satisfied with both methods, giving them the same assessments. CONCLUSION: In the frenectomy procedure, laser surgery is faster and causes less bleeding and may be advantageous in frenectomies.