Modular Assembly of Metamaterials Using Light Gradients.

This is a report on a pilot study that tests the feasibility of assembling photonic metamaterials (PMs) using light gradient forces. Following a strategy that works like modular construction, light gradient forces, produced by a tightly focused, 1D standing wave optical trap, time-multiplexed across a 2D lattice are used to assemble voxels consisting of prefabricated, monodispersed nanoparticles (NPs) with radii ranging from 30 to 500 nm into 3D structures on a hydrogel scaffold. Hundreds of NPs can be manipulated concurrently into a complex heterogeneous voxel this way, and then the process can be repeated by stitching together voxels to form a metamaterial of any size, shape, and constituency although imperfectly. Imperfections introduce random phase shifts and amplitude variations that can have an adverse effect on the band structure. Regardless, PMs are created this way using two different dielectric NPs, polystyrene and rutile, and then the near-infrared performance for each is analyzed with angle-, wavelength-, and polarization-dependent reflection spectroscopy. The cross-polarized spectra show evidence of a resonance peak. Interestingly, whereas the line shape from the polystyrene array is symmetric, the rutile array is not, which may be indicative of Fano resonance. So, even with the structural defects, reflection spectroscopy reveals a resonance.

Calling the amino acid sequence of a protein/peptide from the nanospectrum produced by a sub-nanometer diameter pore.

The blockade current that develops when a protein translocates across a thin membrane through a sub-nanometer diameter pore informs with extreme sensitivity on the sequence of amino acids that constitute the protein. The current blockade signals measured during the translocation are called a nanospectrum of the protein. Whereas mass spectrometry (MS) is still the dominant technology for protein identification, it suffers limitations. In proteome-wide studies, MS identifies proteins by database search but often fails to provide high protein sequence coverage. It is also not very sensitive requiring about a femtomole for protein identification. Compared with MS, a sub-nanometer diameter pore (i.e. a sub-nanopore) directly reads the amino acids constituting a single protein molecule, but efficient computational tools are still required for processing and interpreting nanospectra. Here, we delineate computational methods for processing sub-nanopore nanospectra and predicting theoretical nanospectra from protein sequences, which are essential for protein identification.

Beyond mass spectrometry, the next step in proteomics.

Proteins can be the root cause of a disease, and they can be used to cure it. The need to identify these critical actors was recognized early (1951) by Sanger; the first biopolymer sequenced was a peptide, insulin. With the advent of scalable, single-molecule DNA sequencing, genomics and transcriptomics have since propelled medicine through improved sensitivity and lower costs, but proteomics has lagged behind. Currently, proteomics relies mainly on mass spectrometry (MS), but instead of truly sequencing, it classifies a protein and typically requires about a billion copies of a protein to do it. Here, we offer a survey that illuminates a few alternatives with the brightest prospects for identifying whole proteins and displacing MS for sequencing them. These alternatives all boast sensitivity superior to MS and promise to be scalable and seem to be adaptable to bioinformatics tools for calling the sequence of amino acids that constitute a protein.

Measurements of the size and correlations between ions using an electrolytic point contact.

The size of an ion affects everything from the structure of water to life itself. In this report, to gauge their size, ions dissolved in water are forced electrically through a sub-nanometer-diameter pore spanning a thin membrane and the current is measured. The measurements reveal an ion-selective conductance that vanishes in pores <0.24 nm in diameter-the size of a water molecule-indicating that permeating ions have a grossly distorted hydration shell. Analysis of the current noise power spectral density exposes a threshold, below which the noise is independent of current, and beyond which it increases quadratically. This dependence proves that the spectral density, which is uncorrelated below threshold, becomes correlated above it. The onset of correlations for Li+, Mg2+, Na+ and K+-ions extrapolates to pore diameters of 0.13 ± 0.11 nm, 0.16 ± 0.11 nm, 0.22 ± 0.11 nm and 0.25 ± 0.11 nm, respectively-consonant with diameters at which the conductance vanishes and consistent with ions moving through the sub-nanopore with distorted hydration shells in a correlated way.

Method for Dynamically Detecting Secretions from Single Cells Using a Nanopore.

Secreted proteins mediate cell-to-cell communications. Thus, eavesdropping on the secretome could reveal the cellular phenotype, but it is challenging to detect the proteins because they are secreted only in minute amounts and then diluted in blood plasma or contaminated by cell culture medium or the lysate. In this pilot study, it is demonstrated that secretions from single cancer cells can be detected and dynamically analyzed through measurements of blockades in the electrolytic current due to single molecules translocating through a nanopore in a thin inorganic membrane. It is established that the distribution of blockades can be used to differentiate three different cancer cell lines (U937, MDA-MB-231, and MCF-7) in real time and quickly (<20 s). Importantly, the distinctive blockades associated with the chemokine CCL5, a prognostic factor for disease progression in breast cancer, along with other low-mass biomarkers of breast cancer (PI3, TIMP1, and MMP1) were identified in the context of the secretome of these three cell types, tracked with time, and used to provide information on the cellular phenotype.

Single-molecule protein identification by sub-nanopore sensors.

Recent advances in top-down mass spectrometry enabled identification of intact proteins, but this technology still faces challenges. For example, top-down mass spectrometry suffers from a lack of sensitivity since the ion counts for a single fragmentation event are often low. In contrast, nanopore technology is exquisitely sensitive to single intact molecules, but it has only been successfully applied to DNA sequencing, so far. Here, we explore the potential of sub-nanopores for single-molecule protein identification (SMPI) and describe an algorithm for identification of the electrical current blockade signal (nanospectrum) resulting from the translocation of a denaturated, linearly charged protein through a sub-nanopore. The analysis of identification p-values suggests that the current technology is already sufficient for matching nanospectra against small protein databases, e.g., protein identification in bacterial proteomes.

Discriminating Residue Substitutions in a Single Protein Molecule Using a Sub-nanopore.

It is now possible to create, in a thin inorganic membrane, a single, sub-nanometer-diameter pore (i.e., a sub-nanopore) about the size of an amino acid residue. To explore the prospects for sequencing protein with it, measurements of the force and current were performed as two denatured histones, which differed by four amino acid residue substitutions, were impelled systematically through the sub-nanopore one at a time using an atomic force microscope. The force measurements revealed that once the denatured protein, stabilized by sodium dodecyl sulfate (SDS), translocated through the sub-nanopore, a disproportionately large force was required to pull it back. This was interpreted to mean that the SDS was cleaved from the protein during the translocation. The force measurements also exposed a dichotomy in the translocation kinetics: either the molecule slid nearly frictionlessly through the pore or it slipped-and-stuck. When it slid frictionlessly, regardless of whether the molecule was pulled N-terminus or C-terminus first through the pore, regular patterns were observed intermittently in the force and blockade current fluctuations that corresponded to the distance between stretched residues. Furthermore, the amplitude of the fluctuations in the current blockade were correlated with the occluded volume associated with the amino acid residues in the pore. Finally, a comparison of the patterns in the current fluctuations associated with the two practically identical histones supported the conclusion that a sub-nanopore was sensitive enough to discriminate amino acid substitutions in the sequence of a single protein molecule by measuring volumes of 0.1 nm3 per read.

Reading the primary structure of a protein with 0.07 nm3 resolution using a subnanometre-diameter pore.

The primary structure of a protein consists of a sequence of amino acids and is a key factor in determining how a protein folds and functions. However, conventional methods for sequencing proteins, such as mass spectrometry and Edman degradation, suffer from short reads and lack sensitivity, so alternative approaches are sought. Here, we show that a subnanometre-diameter pore, sputtered through a thin silicon nitride membrane, can be used to detect the primary structure of a denatured protein molecule. When a denatured protein immersed in electrolyte is driven through the pore by an electric field, measurements of a blockade in the current reveal nearly regular fluctuations, the number of which coincides with the number of residues in the protein. Furthermore, the amplitudes of the fluctuations are highly correlated with the volumes that are occluded by quadromers (four residues) in the primary structure. Each fluctuation, therefore, represents a read of a quadromer. Scrutiny of the fluctuations reveals that the subnanometre pore is sensitive enough to read the occluded volume that is related to post-translational modifications of a single residue, measuring volume differences of ∼0.07 nm3, but it is not sensitive enough to discriminate between the volumes of all twenty amino acids.

Wiring Together Synthetic Bacterial Consortia to Create a Biological Integrated Circuit.

The promise of adapting biology to information processing will not be realized until engineered gene circuits, operating in different cell populations, can be wired together to express a predictable function. Here, elementary biological integrated circuits (BICs), consisting of two sets of transmitter and receiver gene circuit modules with embedded memory placed in separate cell populations, were meticulously assembled using live cell lithography and wired together by the mass transport of quorum-sensing (QS) signal molecules to form two isolated communication links (comlinks). The comlink dynamics were tested by broadcasting "clock" pulses of inducers into the networks and measuring the responses of functionally linked fluorescent reporters, and then modeled through simulations that realistically captured the protein production and molecular transport. These results show that the comlinks were isolated and each mimicked aspects of the synchronous, sequential networks used in digital computing. The observations about the flow conditions, derived from numerical simulations, and the biofilm architectures that foster or silence cell-to-cell communications have implications for everything from decontamination of drinking water to bacterial virulence.

Live Bacterial Physiology Visualized with 5 nm Resolution Using Scanning Transmission Electron Microscopy.

It is now possible to visualize at nanometer resolution the infection of a living biological cell with virus without compromising cell viability using scanning transmission electron microscopy (STEM). To provide contrast while preserving viability, Escherichia coli and P1 bacteriophages were first positively stained with a very low concentration of uranyl acetate in minimal phosphate medium and then imaged with low-dose STEM in a microfluidic liquid flow cell. Under these conditions, it was established that the median lethal dose of electrons required to kill half the tested population was LD50 = 30 e(-)/nm(2), which coincides with the disruption of a wet biological membrane, according to prior reports. Consistent with the lateral resolution and high-contrast signal-to-noise ratio (SNR) inferred from Monte Carlo simulations, images of the E. coli membrane, flagella, and the bacteriophages were acquired with 5 nm resolution, but the cumulative dose exceeded LD50. On the other hand, with a cumulative dose below LD50 (and lower SNR), it was still possible to visualize the infection of E. coli by P1, showing the insertion of viral DNA within 3 s, with 5 nm resolution.

Direct, concurrent measurements of the forces and currents affecting DNA in a nanopore with comparable topography.

We report direct, concurrent measurements of the forces and currents associated with the translocation of a single-stranded DNA molecule tethered to the tip of an atomic force microscope (AFM) cantilever through synthetic pores with topagraphies comparable to the DNA. These measurements were performed to gauge the signal available for sequencing and the electric force required to impel a single molecule through synthetic nanopores ranging from 1.0 to 3.5 nm in diameter in silicon nitride membranes 6-10 nm thick. The measurements revealed that a molecule can slide relatively frictionlessly through a pore, but regular fluctuations are observed intermittently in the force (and the current) every 0.35-0.72 nm, which are attributed to individual nucleotides translating through the nanopore in a turnstile-like motion.

Single cell transfection with single molecule resolution using a synthetic nanopore.

We report the development of a single cell gene delivery system based on electroporation using a synthetic nanopore, that is not only highly specific and very efficient but also transfects with single molecule resolution at low voltage (1 V) with minimal perturbation to the cell. Such a system can be used to control gene expression with unprecedented precision--no other method offers such capabilities.

Biological noise abatement: coordinating the responses of autonomous bacteria in a synthetic biofilm to a fluctuating environment using a stochastic bistable switch.

Noise is inherent to single cell behavior. Its origins can be traced to the stochasticity associated with a few copies of genes and low concentrations of protein and ligands. We have studied the mechanisms by which the response of noisy elements can be entrained for biological signal processing. To elicit predictable biological function, we have engineered a gene environment that incorporates a gene regulatory network with the stringently controlled microenvironment found in a synthetic biofilm. The regulatory network leverages the positive feedback found in quorum-sensing regulatory components of the lux operon, which is used to coordinate cellular responses to environmental fluctuations. Accumulation of the Lux receptor in cells, resulting from autoregulation, confers a rapid response and enhanced sensitivity to the quorum-sensing molecule that is retained after cell division as epigenetic memory. The memory of the system channels stochastic noise into a coordinated response among quorum-sensing signal receivers in a synthetic biofilm in which the noise diminishes with repeated exposure to noisy transmitters on the input of a signaling cascade integrated into the same biofilm. Thus, gene expression in the receivers, which are autonomous and do not communicate with each other, is synchronized to fluctuations in the environment.

Epigenetic memory emerging from integrated transcription bursts.

Some autonomous bacteria coordinate their actions using quorum-sensing (QS) signals to affect gene expression. However, noise in the gene environment can compromise the cellular response. By exercising precise control over a cell's genes and its microenvironment, we have studied the key positive autoregulation element by which the lux QS system integrates noisy signals into an epigenetic memory. We observed transcriptional bursting of the lux receptor in cells stimulated by near-threshold levels of QS ligand. The bursts are integrated over time into an epigenetic memory that confers enhanced sensitivity to the ligand. An emergent property of the system is manifested in pattern formation among phenotypes within a chemical gradient.

Direct visualization of single-molecule translocations through synthetic nanopores comparable in size to a molecule.

A nanopore is the ultimate analytical tool. It can be used to detect DNA, RNA, oligonucleotides, and proteins with submolecular sensitivity. This extreme sensitivity is derived from the electric signal associated with the occlusion that develops during the translocation of the analyte across a membrane through a pore immersed in electrolyte. A larger occluded volume results in an improvement in the signal-to-noise ratio, and so the pore geometry should be made comparable to the size of the target molecule. However, the pore geometry also affects the electric field, the charge density, the electro-osmotic flow, the capture volume, and the response time. Seeking an optimal pore geometry, we tracked the molecular motion in three dimensions with high resolution, visualizing with confocal microscopy the fluorescence associated with DNA translocating through nanopores with diameters comparable to the double helix, while simultaneously measuring the pore current. Measurements reveal single molecules translocating across the membrane through the pore commensurate with the observation of a current blockade. To explain the motion of the molecule near the pore, finite-element simulations were employed that account for diffusion, electrophoresis, and the electro-osmotic flow. According to this analysis, detection using a nanopore comparable in diameter to the double helix represents a compromise between sensitivity, capture volume, the minimum detectable concentration, and response time.

Using a nanopore for single molecule detection and single cell transfection.

We assert that it is possible to trap and identify proteins, and even (conceivably) manipulate proteins secreted from a single cell (i.e. the secretome) through transfection via electroporation by exploiting the exquisite control over the electrostatic potential available in a nanopore. These capabilities may be leveraged for single cell analysis and transfection with single molecule resolution, ultimately enabling a careful scrutiny of tissue heterogeneity.

High-yield transfer printing of metal-insulator-metal nanodiodes.

Nanoscale metal-insulator-metal (MIM) diodes represent important devices in the fields of electronic circuits, detectors, communication, and energy, as their cutoff frequencies may extend into the "gap" between the electronic microwave range and the optical long-wave infrared regime. In this paper, we present a nanotransfer printing method, which allows the efficient and simultaneous fabrication of large-scale arrays of MIM nanodiode stacks, thus offering the possibility of low-cost mass production. In previous work, we have demonstrated the successful transfer and electrical characterization of macroscopic structures. Here, we demonstrate for the first time the fabrication of several millions of nanoscale diodes with a single transfer-printing step using a temperature-enhanced process. The electrical characterization of individual MIM nanodiodes was performed using a conductive atomic force microscope (AFM) setup. Our analysis shows that the tunneling current is the dominant conduction mechanism, and the electrical measurement data agree well with experimental data on previously fabricated microscale diodes and numerical simulations.

Imaging in real-time with FRET the redox response of tumorigenic cells to glutathione perturbations in a microscale flow.

Despite the potential benefits of selective redox-modulating strategies for cancer therapy, an efficacious methodology for testing therapies remains elusive because of the difficulty in measuring intracellular redox potentials over time. In this report, we have incorporated a new FRET-based biosensor to follow in real time redox-sensitive processes in cells transformed to be tumorigenic and cultured in a microfluidic channel. A microfluidic network was used to control micro-scale flow near the cells and at the same time deliver drugs exogenously. Subsequently, the response of a redox homeostasis circuit was tested, namely reduced glutathione (GSH)/oxidized glutathione(GSSG), to diamide, a thiol oxidant, and two drugs used for cancer therapies: BSO (L-buthionine-[SR]-sulfoximine) and BCNU (carmustine). The main outcome from these experiments is a comparison of the temporal depletion and recovery of GSH in single living cells in real-time. These data demonstrate that mammalian cells are capable of restoring a reduced intracellular redox environment in minutes after an acute oxidative insult is removed. This recovery is significantly delayed by (i) the inhibition of GSH biosynthesis by BSO; (ii) the inactivation of glutathione reductase by BCNU; and (iii) in tumorigenic cells relative to an isogenic non-tumorigenic control cell line.

Slowing the translocation of double-stranded DNA using a nanopore smaller than the double helix.

It is now possible to slow and trap a single molecule of double-stranded DNA (dsDNA), by stretching it using a nanopore, smaller in diameter than the double helix, in a solid-state membrane. By applying an electric force larger than the threshold for stretching, dsDNA can be impelled through the pore. Once a current blockade associated with a translocating molecule is detected, the electric field in the pore is switched in an interval less than the translocation time to a value below the threshold for stretching. According to molecular dynamics (MD) simulations, this leaves the dsDNA stretched in the pore constriction with the base-pairs tilted, while the B-form canonical structure is preserved outside the pore. In this configuration, the translocation velocity is substantially reduced from 1 bp/10 ns to approximately 1 bp/2 ms in the extreme, potentially facilitating high fidelity reads for sequencing, precise sorting, and high resolution (force) spectroscopy.