A parasitic leiomyoma of the sigmoid mesentery with schwannoma-like image findings.

BACKGROUND: Parasitic leiomyoma (PL) consists of uterine fibroids separate from the uterus that grow in extrauterine tissues such as the peritoneum and mesenterium. The diagnosis of PL requires a thorough medical history of laparoscopic myomectomies using a morcellator and the identification of typical magnetic resonance imaging (MRI) findings as uterine fibroids. Imaging diagnosis of PL is occasionally difficult when PL degenerates in various ways, owing to atypical findings on computed tomography (CT) and MRI. CASE PRESENTATION: A 29-year-old woman with a history of laparoscopic myomectomy visited a local hospital with lower abdominal pain. A mesenteric tumor on the sigmoid mesentery was suspected on MRI, and she was referred to our hospital. CT scan showed strong early contrast uptake in the center of the tumor, and MRI T2-weighted images showed high signals at the tumor margins and low signals in the center, suggesting a schwannoma. PL was also part of the differential diagnosis because of the patient's history of laparoscopic myomectomy. With a preoperative diagnosis of a sigmoid colon mesenteric tumor undeniably of malignant origin, laparoscopic resection of the sigmoid mesenteric tumor was performed. Histopathological examination revealed it to be a PL. CONCLUSIONS: We report a case of PL of the sigmoid mesentery with schwannoma-like findings on imaging that was treated laparoscopically. PL is sometimes difficult to distinguish from schwannomas because of the variety of imaging findings, such as uterine fibroids. PL should be considered in the differential diagnosis of mesenteric tumors following laparoscopic myomectomies, even if it does not show typical imaging findings, such as uterine fibroids.

Induction chemotherapy and hepatic artery embolization followed by extended resection for locally advanced gallbladder cancer: a case report.

BACKGROUND: Surgical resection plays a critical role in the curative therapy of patients with gallbladder cancer. However, extended resection for locally advanced gallbladder cancer is a controversial procedure because of the high operative morbidity, mortality, and poor prognosis after surgery, without consensus of its suitability. Several reports have described preoperative treatment modalities to reduce the risk of mortality and morbidity and improve the curability of surgery for locally advanced GBCA. However, only a few well-designed studies have verified the benefits of these preoperative strategies. CASE PRESENTATION: A 62-year-old male patient presented to our department with a gallbladder tumor detected on abdominal ultrasound during an annual medical checkup. Multi-phase enhanced CT revealed a gallbladder tumor with a maximum diameter of 34 mm, invading the right hepatic artery, pancreatic head, hepatic flexure of the colon, and first portion of the duodenum. We diagnosed gallbladder carcinoma as cT4 cN0 cM0 cStage IVA in the Union for International Cancer Control (UICC) classification 8th edition. After administration of 12 cycles of gemcitabine and cisplatin plus S-1 regimen, tumor shrinkage was observed on computed tomography, and elevated serum CA19-9 levels were reduced to normal limits. After preoperative hepatic artery embolization, we performed gallbladder bed resection with pancreaticoduodenectomy (minor hepatopancreatoduodenectomy) and combined resection of the right hepatic artery and hepatic flexure of the colon. Histological examination revealed no evidence of lymph node metastasis (ypT4 ypN0 ycM0 yp Stage IVA in the 8th edition of the UICC). The proximal bile duct and dissected margins were negative. CONCLUSIONS: The combination of induction chemotherapy and preoperative hepatic artery embolization, followed by minor hepatopancreatoduodenectomy and combined resection of the involved arteries and partial colon, could be a feasible treatment strategy for patients with locally advanced gallbladder cancer invading neighboring organs.

Cortical thickness mapping at segmented regions in the distal radius using HR-pQCT.

INTRODUCTION: An advanced method of analyzing the cortical bone microarchitecture of the distal radius using high-resolution peripheral quantitative computed tomography (HR-pQCT) was developed. MATERIALS AND METHODS: The subjects were 60 women (20: aged 30-49, 20: aged 50-69, and 20: aged 70-89 years). The distal radius was scanned by HR-pQCT, and its cortical volumetric bone mineral density (Ct.vBMD), cortical porosity (Ct.Po), and cortical thickness (Ct.Th) were measured. The cortical bone was also divided into three areas according to whether its thickness was < 0.5 mm, 0.5-1.0 mm, or > 1.0 mm, and the percentage of each surface area in the total surface area of cortical bone was calculated (Ct.Th (<0.5), Ct.Th (0.5-1.0), Ct.Th (>1.0), respectively). The cortical bone at the distal radius was further segmented into dorsal, palmar, radial, and ulnar sides, and the above-described parameters were measured in these regions. RESULTS: Integral analysis showed that Ct.vBMD and Ct.Th decreased and Ct.Po increased with age (R = - 0.62, - 0.55, and 0.54). Ct.Th (< 0.5) expanded with age (R = 0.49), with the rate of change between those aged 30-49 years and those aged 50-69 years being 106.7%. On regional analysis, the expansion of Ct.Th (< 0.5) with age was particularly marked on the dorsal and palmar side (R = 0.51 and 0.49), where the rate of change between those aged 30-49 years and those aged 50-69 years was the highest, at 196.1 and 149.6%. CONCLUSION: The method to identify areas of cortical bone thinning in the segmented regions of the dorsal, palmar, radial, and ulnar sides of the distal radius using HR-pQCT may offer a sensitive assessment of age-related deterioration of cortical bone.

Computed tomographic evaluation of three types of screw trajectories for posterior cervical spine fixation: Cervical pedicle screw, lateral mass screw, and paravertebral foramen screw.

Computed tomography (CT) attenuation values of cervical spine were evaluated in vivo using a clinically relevant group. To compare CT attenuation values between cervical pedicle screw (CPS), lateral mass screw (LMS), and paravertebral foramen screw (PVFS) trajectories. CPS and LMS are commonly used for posterior fixation of the cervical spine. The PVFS method has been reported as a new method. CT attenuation values along the screw trajectory are reportedly associated with screw stability. We identified 45 patients who had undergone whole-body CT for trauma with no injury to the cervical spine. Regions of interest (ROIs) were designated along the trajectories that would be used for CPS, LMS, and PVFS through vertebral pedicles and lateral masses of the C3-C6 vertebrae. CT attenuation values of each ROI were measured and compared between each screw trajectories at each cervical vertebral level. Participants were divided into Group I (age, 20-39 years; n = 12), Group II (age, 40-59 years; n = 17), and Group III (age, 60-79 years; n = 16). CT attenuation values of ROIs were compared between each age group. PVFS trajectories showed higher CT attenuation values than LMS trajectories at every vertebral level and also higher values than CPS trajectories at C5 and C6 levels. CT attenuation values at C3 were lower than those at C4 in the LMS trajectory and lower than those at C5 and C6 in the PVFS trajectory. CT attenuation values were lower in the elder group (>60 years old) than in the other 2 groups for all screw trajectories. CT attenuation values suggested that the PVFS technique may be useful for posterior fixation of the cervical spine in elder patients who require more secure fixation.

Combined thoracoscopic and axillary subcutaneous endoscopic thyroidectomy: a novel approach for cervicomediastinal goiters.

PURPOSE: After our group described the first remote-access thyroidectomy series in 2000, the procedure has been further developed. Although a thoracoscopic approach with a conventional open cervical incision for thyroid goiters with mediastinal extension has been performed at many institutions, remote-access thyroidectomy for cervicomediastinal goiters has not been established. We have performed combined thoracoscopic and axillary subcutaneous endoscopic thyroidectomies (axillo-thoracic endoscopic thyroidectomies). Here, we describe a novel technique for performing a remote-access thyroidectomy for a cervicomediastinal goiter (CMG). PATIENTS AND METHODS: The patients with CMGs who agreed to an axillo-thoracic endoscopic thyroidectomy at one of two hospitals in Japan underwent a remote-access thyroidectomy. RESULTS: We performed the axillo-thoracic endoscopic right or left hemithyroidectomy successfully, but most of the patients did not require the thoracoscopic procedure. None of the patients had complications, and none was converted to an open thyroidectomy. CONCLUSIONS: Most thyroid goiters with substernal extension can be removed by the axillary approach, but some cases require a thoracoscopic approach. The novel approach described herein (axillo-thoracic endoscopic thyroidectomy) enables the safe excision of a CMG with high patient satisfaction for selected patients.

Relationships between QUS and HR-pQCT, DXA, and bone turnover markers.

INTRODUCTION: Relationship of quantitative ultrasound (QUS) with high-resolution peripheral quantitative computed tomography (HR-pQCT), dual-energy X-ray absorptiometry (DXA), and bone-related biochemical markers was analyzed. MATERIALS AND METHODS: The subjects were 480 individuals. Speed of sound (SOS) was measured by calcaneal QUS. Volumetric bone mineral density (vBMD) and microarchitecture of trabecular and cortical bone in the distal radius and tibia were assessed by HR-pQCT. Areal bone mineral density (aBMD) in the lumbar spine and proximal femur were measured by DXA. TRACP-5b, P1NP, 25 (OH) vitamin D, and pentosidine were evaluated by biochemical tests. The correlation of each parameter was analyzed for all subjects and by sex and age group. RESULTS: QUS was moderately correlated with Tb.vBMD and Tb.BV/TV in the radius and tibia. No correlation was seen with Ct.vBMD or cortical porosity (Ct.Po). Although a correlation was seen with cortical thickness (Ct.Th) in the tibia in all subjects, no correlation was seen in women aged ≥ 60 years. QUS showed moderate correlations with aBMD in the proximal femur. Although moderate correlation was seen with aBMD in the lumbar spine in all subjects, no correlation was seen in subjects aged ≥ 60 years. No significant correlations were seen between QUS and biochemical markers. CONCLUSIONS: Moderate correlations were seen between QUS and Tb.vBMD and microarchitecture in the radius and tibia and aBMD of the proximal femur. On the other hand, practically no correlations were seen with Ct.vBMD or Ct.Po and the bone-related biochemical markers. Only in middle age, moderate correlations were seen with Ct.Th in the tibia and with aBMD of the lumbar spine.

Remote-access hemithyroidectomy in a patient with papillary thyroid cancer after ipsilateral irradiation: a case report.

Remote-access thyroidectomy (RAT) is becoming a more frequently used approach that can avoid scars in the neck and provide better cosmetic results than open surgery. However, there has been no surgical indication for RAT in patients who have a history of cervical treatment (surgery or irradiation), and the use of RAT has been avoided in such patients. Here, we report a case in which a remote-access endoscopic hemithyroidectomy and central lymph node dissection by the anterior chest approach was successfully performed in a patient with papillary thyroid carcinoma (a 77-year-old Japanese male) after he had undergone ipsilateral cervical radiation therapy to parotid gland cancer (mucoepidermoid carcinoma) thirteen years earlier. Regarding trocar insertion, a 30-mm skin incision was made in the left anterior chest approx. 5 cm below the clavicle. Two 5-mm trocars were inserted through the 30-mm incision. We then insufflated with carbon dioxide to 6 mmHg. One additional 5-mm trocar was placed cephalad to the 30-mm incision. When we performed this RAT, we detected no effect of the prior irradiation. To the best of our knowledge, this is the first report of RAT after irradiation. The cosmetic outcome of RAT is clearly superior, and the present case demonstrates that a RAT can be safely performed in carefully selected patients even after irradiation.

Scoping review of approaches used for remote-access parathyroidectomy: A contemporary review of techniques, tools, pros and cons.

After our coauthors described the first remote-access parathyroidectomy (RAP) series in 2000, several other approaches were developed. No systematic review has been performed to classify and evaluate RAP techniques. We performed a literature search using PubMed and Cochrane Library (CENTRAL). A total of 71 studies met our inclusion/exclusion criteria. RAP can be categorized into five approaches: (1) endoscopic and robotic axillary, (2) anterior chest, (3) transoral, (4) retroauricular, and (5) a combination of these approaches. The limited data in the literature suggest that the cure rates and safety of RAP are in no way inferior to those of open parathyroidectomy. Each approach has its advantages and disadvantages, and the recommendations for the selection of each approach are listed. The selection of approach methods might depend on the surgeon's experience and familiarity and the patient's preference and disease status.

Randomized controlled trial of daily teriparatide, weekly high-dose teriparatide, or bisphosphonate in patients with postmenopausal osteoporosis: The TERABIT study.

PURPOSE: The effects of daily teriparatide (20 µg) (D-PTH), weekly high-dose teriparatide (56.5 µg) (W-PTH), or bisphosphonates (BPs) on areal bone mineral density (aBMD), bone turnover markers (BTMs), volumetric BMD (vBMD), microarchitecture, and estimated strength were investigated in postmenopausal osteoporosis patients. METHODS: The study participants were 131 women with a history of fragility fractures. They were randomized to receive D-PTH, W-PTH, or BPs (alendronate or risedronate) for 18 months. Dual-energy X-ray absorptiometry (DXA), BTMs, and high-resolution peripheral quantitative CT (HR-pQCT) parameters were evaluated at baseline and after 6 and 18 months of treatment. The primary endpoint was the change (%) in cortical thickness (Ct.Th) after 18 months' treatment compared with baseline. RESULTS: DXA showed that D-PTH, W-PTH, and BPs increased lumbar spine aBMD (+12.0%, +8.5%, and +6.8%) and total hip aBMD (+3.0%, +2.1%, and +3.0%), but D-PTH and W-PTH decreased 1/3 radius aBMD (-4.1%, -3.0%, -1.4%) after 18 months. On HR-pQCT, D-PTH increased trabecular vBMD (Tb.vBMD) at the distal radius and tibia after 18 months (+6.4%, +3.7%) compared with the BPs group, decreased cortical volumetric tissue mineral density (Ct.vTMD) (-1.8%, -0.9%) compared with the other groups, increased Ct.Th (+1.3%, +3.9%), and increased failure load (FL) (+4.7%, +4.4%). W-PTH increased Tb.vBMD (+5.3%, +1.9%), maintained Ct.vTMD (-0.7%, +0.2%) compared with D-PTH, increased Ct.Th (+0.6%, +3.6%), and increased FL (+4.9%, +4.5%). The BPs increased Tb.vBMD only in the radius (+2.0%, +0.2%), maintained Ct.vTMD (-0.6%, +0.3%), increased Ct.Th (+0.5%, +3.4%), and increased FL (+3.9%, +2.8%). CONCLUSIONS: D-PTH and W-PTH comparably increased Ct.Th, the primary endpoint. D-PTH had a strong effect on trabecular bone. Although D-PTH decreased Ct.vTMD, it increased Ct.Th and total bone strength. W-PTH had a moderate effect on trabecular bone, maintained Ct.vTMD, and increased Ct.Th and total bone strength to the same extent as D-PTH.

Analysis of bone erosions in rheumatoid arthritis using HR-pQCT: Development of a measurement algorithm and assessment of longitudinal changes.

PURPOSE: The purpose of this study was to establish an algorithm for measuring bone erosions at metacarpophalangeal (MCP) joints using high-resolution peripheral quantitative computed tomography (HR-pQCT), to investigate the precision of measurements, and to assess longitudinal changes in bone erosions among patients with rheumatoid arthritis (RA). METHODS: The 2nd and 3rd MCP joints were scanned at a voxel size of 60.7 µm using second-generation HR-pQCT. Bone erosions on MCP joints were identified using a semi-automated algorithm we developed, and each erosion parameter was measured. Measurement reproducibility was evaluated in 19 healthy subjects using intraclass correlation coefficients (ICCs) and root mean square percent coefficient of variance (RMS%CV). Finally, longitudinal changes in bone erosions over a period of 12 months were assessed in 26 patients with RA based on the calculated least significant change (LSC). RESULTS: Reproducibilities for measurement parameters regarding bone erosions with our algorithm were good (all ICCs ≥ 0.98; all RMS%CVs < 5%). No erosion parameters showed significant changes after 12 months of treatment in terms of median values in all erosions, while both progression and repair of erosions were observed individually (e.g., erosion volume: progression, 26% (+0.62 mm3); repair, 34% (-0.85 mm3); no change, 40%). CONCLUSIONS: The measurement algorithm developed for bone erosions at MCP joints showed good reproducibility. Both progression and repair of bone erosions were observed in patients with RA even after 12 months of appropriate treatment. Our algorithm may be useful to investigate the etiology of RA and assess drug efficacy.

Differences in the flexion and extension phases during kneeling investigated by kinematic and contact point analyses: a cross-sectional study.

BACKGROUND: Kneeling is necessary for certain religious and ceremonial occasions, crouching work, and gardening, which many people take part in worldwide. However, there have been few reports about kneeling activities. The purpose of this study was to clarify the kinematics of kneeling. METHODS: The subjects were 15 healthy young males. Kneeling activity was analysed within a knee flexion angle from 100° to maximum flexion (maxflex, mean ± SD = 161.3 ± 3.2°). The kinematic and contact point (CP) analyses were performed using a 2D/3D registration method, in which a 3D bone model created from computed tomography images was matched to knee lateral fluoroscopic images and analysed on a personal computer. RESULTS: In the kinematic analysis, the femur translated 37.5 mm posteriorly and rotated 19.8° externally relative to the tibia during the knee flexion phase. During the knee extension phase, the femur translated 36.4 mm anteriorly, which was almost the same amount as in the knee flexion phase. However, the femur rotated only 7.4° internally during the knee extension phase. In the CP analysis, the amount of anterior translation of the CP in the knee extension phase was greater in the medial CP and smaller in the lateral CP than that of posterior translation in the knee flexion phase. CONCLUSIONS: In kneeling, there was a difference in the rotational kinematics between the flexion phase and the extension phase. The kinematic difference between the flexion and extension phases may have some effect on the meniscus and articular cartilage.

Long-Term Results of Kyocera Modular Limb Salvage System after Resection of Tumors in the Distal Part of the Femur: Report from Japanese Musculoskeletal Oncology Group Study.

BACKGROUND: The distal femur is a common site of bone tumors. After surgical resection, prosthetic replacement is a major reconstruction method. We aimed to elucidate the long-term outcomes of the Kyocera Modular Limb Salvage (KMLS) systems after resection of tumors in the distal part of the femur. METHODS: Between 1998 and 2014, 125 patients were treated at 14 institutions. There were 59 males and 66 females, with a mean age of 35 years. The mean follow-up period was 132 months. RESULTS: There had been 65 additional surgeries, including 56 revisions and 9 amputations: 15 for aseptic loosening, 14 for stem breakage, 13 for deep infection, 13 for rotator-hinge bushing failure, 5 for local recurrence, and 5 for others. Implant survival rates at 10 and 15 years were 58.5% and 39.4%. The cumulative incidence of 15-year revision for femoral stem breakage was 31.7% in patients with cementless fixation. The 15-year cumulative incidence of revision for aseptic loosening was 19.8% in patients with cement fixation. CONCLUSIONS: KMLS systems represent a reliable system with long-term results. Stem breakage should be considered in patients with cementless and/or smaller femoral stem sizes. Aseptic loosening should be considered in patients with cement systems after 10 years.

Bone microstructure in healthy men measured by HR-pQCT: Age-related changes and their relationships with DXA parameters and biochemical markers.

OBJECTIVE: The primary purpose of this cross-sectional study was to investigate the characteristics of age-related changes in bone microstructure on high-resolution peripheral quantitative computed tomography (HR-pQCT), areal bone mineral density (aBMD) on dual-energy X-ray absorptiometry (DXA), and bone-related biochemical markers in men. The secondary purpose of this study was to examine how bone microstructure is related to aBMD and biochemical markers. METHODS: The subjects were 128 healthy Japanese men (20-97 years old). Bone microstructure was measured in the distal radius and tibia using second-generation HR-pQCT; aBMD in the proximal femur and lumbar spine was measured with DXA; and tartrate-resistant acid phosphatase-5b (TRACP-5b), type I procollagen-N-propeptide (P1NP), 25(OH) vitamin D, and pentosidine concentrations were measured by blood tests. RESULTS: In trabecular bone, the trabecular volumetric BMD (Tb.vBMD) and trabecular number (Tb.N) were lower with age (r = -0.23, -0.35) (r = -0.36,-0.33), and trabecular separation (Tb.Sp) and the star volume of marrow space (V*ms) were higher with age (r = 0.29, 0.41) (r = 0.34, 0.38) in both the radius and tibia. In cortical bone, cortical volumetric BMD (Ct.vBMD) was lower with age (r = -0.25, -0.52), and cortical porosity (Ct.Po) was higher with age (r = 0.67, 0.62) in both the radius and tibia. In the tibia, cortical thickness (Ct.Th) and cortical area (Ct.Ar) were lower with age (r = -0.40) (r = -0.43), whereas, in the radius, they were maintained, and periosteal perimeter (Ct.Pm) was higher with age (r = 0.35). aBMD in the proximal femur and P1NP were lower, and pentosidine was higher with increased age, whereas aBMD in the lumbar spine, TRACP-5b, and 25(OH) vitamin D had no relationships with age. DXA and HR-pQCT showed strong correlations particularly with femoral aBMD and tibial Tb.vBMD and Ct.Ar (r = 0.61) (r = 0.61), whereas no DXA parameters were related with Ct.Po. In correlations between biochemical markers and HR-pQCT, TRACP-5b and total P1NP were negatively correlated with Ct.vBMD (r = -0.31) (r = -0.35), but almost no other correlations were seen. CONCLUSIONS: Age-related changes of the bone microstructure in men were characterized by decreases in trabecular and cortical vBMD associated with decreased trabecular number, cavitation of the trabecular structure, and increased cortical porosity. Femoral aBMD was strongly related to bone microstructure in the tibia, whereas both lumbar aBMD and femoral aBMD were not related to Ct.Po, and biochemical markers showed almost no relationships with bone microstructure.

Differences in bone mineral density and morphometry measurements by fixed versus relative offset methods in high-resolution peripheral quantitative computed tomography.

INTRODUCTION: High-resolution peripheral quantitative computed tomography (HR-pQCT), which enables in vivo analysis of bone morphometry, is widely used in osteoporosis research. The scan position is usually determined by the fixed offset method; however, there are concerns that the scan position can become relatively proximal if limb length is short. The present study compared bone mineral density and morphometry measured using the fixed and relative offset methods, in which the scan position is determined based on the lengths of the forearm and lower leg, and investigated factors responsible for measurement differences between the two methods. METHODS: A total of 150 healthy Japanese subjects, comprising 75 men and 75 women, with a mean age of 45.1 years, were enrolled in this study. The distal radius and tibia were scanned using the fixed and relative offset methods; the fixed offset method involved scanning the radius and tibia at 9 mm and 22 mm, respectively, proximal to their distal articular surfaces. By contrast, the relative offset method entailed scanning the radius at 4% of the forearm length and the tibia at 7.3% of the lower leg length, proximal to their respective distal articular surfaces. The percent overlap between the scan positions of the two methods was measured using the scout views. Measurement values obtained with the two methods were compared. The correlation between the differences in the values among the two methods and forearm length, lower leg length, and body height was examined. RESULTS: The subjects had a mean height of 164.3 ± 14.3 cm, mean forearm length of 252.9 ± 17.3 mm, and mean lower leg length of 346.7 ± 22.3 mm. The mean percent overlap was 85.0 ± 9.1% (59.2-99.6%) for the radius and 79.8 ± 12.5% (48.3-99.8%) for the tibia. Fixed offset scanning yielded higher total volumetric bone mineral density (Tt.vBMD) and cortical vBMD (Ct.vBMD) and greater cortical thickness (Ct.Th) (all p < 0.001). The differences between the two methods in terms of Tt.vBMD, Ct.vBMD and Ct.Th were significantly greater with shorter forearm length, lower leg length, and body height (radius: 0.51 < |r| < 0.63, tibia: 0.61 < |r| < 0.95). CONCLUSION: Measurements of bone mineral density and morphometry obtained using the fixed offset method differed from those obtained using the relative offset method, which takes body size into account. Shorter body height, forearm length, and lower leg length were found to correlate with greater measurement differences. In populations with smaller stature, use of the fixed offset method results in relatively proximal images; thus, caution should be exercised when comparing groups of different height.

Total endoscopic thyroidectomy after open neck biopsy of the follicular lymphoma of the thyroid gland.

Remote-access total endoscopic thyroidectomy (TET) is a recently established approach that can avoid producing scars in the neck. There are no clear surgical indications for TET for benign nodules or for malignant tumors at present. We report a successful TET in a 50-year-old Japanese woman with follicular lymphoma of the thyroid gland after an open neck biopsy. She had been referred to us with a neck tumor noted 2 months earlier. Because of adhesion, we performed a combined resection of the thyroid and partial right sternohyoid muscle. To the best of our knowledge, there is no other report of a TET performed after open neck surgery. Our patient's case demonstrates that (a) the cosmetic outcome of TET is clearly superior to that of conventional open neck surgery, and (b) a TET can be suitable even for reoperation if carefully selected.

Effects of monthly intravenous ibandronate on bone mineral density and microstructure in patients with primary osteoporosis after teriparatide treatment: The MONUMENT study.

PURPOSE: To investigate the effects of sequential therapy with monthly intravenous ibandronate on bone mineral density (BMD) and microstructure in patients with primary osteoporosis who received teriparatide treatment. METHODS: Sixty-six patients with primary osteoporosis who had undergone teriparatide treatment for more than 12 months (mean 18.6 months) received sequential therapy with 1 mg/month intravenous ibandronate for 12 months. The patients were evaluated using dual-energy X-ray absorptiometry (DXA), quantitative ultrasound, bone turnover markers, and high-resolution peripheral quantitative computed tomography (HR-pQCT) at baseline and 6 and 12 months after beginning administration. RESULTS: At 12 months after beginning sequential therapy, the bone resorption marker, tartrate-resistant acid phosphatase-5b, decreased by 39.5%, with 82.3% of the patients exhibiting levels within the normal limit. DXA revealed that the BMD of the lumbar spine increased by 3.2%, with 79.0% of the patients exhibiting a response, and 40.3% experiencing an increase in BMD over 5%. HR-pQCT revealed that the cortical thickness of the distal tibia was increased by 2.6%. The cortical area increased by 2.5%, and the buckling ratio (an index of cortical instability) decreased by 2.5%. Most parameters of the trabecular bone showed no significant changes. These changes in the cortical bone were observed in both the distal radius and tibia and appeared beginning 6 months after treatment initiation. CONCLUSIONS: Sequential therapy with monthly intravenous ibandronate increased the BMD and improved the cortical bone microstructure of osteoporotic patients who had undergone teriparatide treatment.

Precision of 3D Registration Analysis for Longitudinal Study of Second-Generation HR-pQCT.

OBJECTIVE: The objective of this research was to develop 3D registration analysis method in longitudinal studies of high-resolution peripheral quantitative computed tomography (HR-pQCT), to analyze ranges of bone microstructure parameters in addition to standard parameters, and to test the precision of these measurements. METHODS: Scans of HR-pQCT and analysis of bone microstructure were performed at 3 times in 15 subjects. The 3 images were matched 3-dimensionally, and bone microstructures were analyzed in the common region. In addition to standard measurement parameters of geometry, bone mineral density (BMD), trabecular bone, and cortical bone, parameters showing plate to rod-like structure, connectivity, cavity formation of trabecular bone, and bending stability of cortical bone were also measured. Precision was evaluated with the root mean square percent coefficient variance (RMS%CV). RESULTS: RMS%CV was 0.1%-1.3% for geometry, 0.6%-1.9% for BMD, 0.8%-3.3% for trabecular bone, 2.1%-9.8% for additionally measured trabecular bone, 1.0%-3.4% for cortical bone excluding Ct.Po, 6.0%-6.1% for Ct.Po, and 0.8%-1.5% for additionally measured cortical bone. Precision was higher for 3D registration than for 2D registration in geometry, BV/TV, and Ct.Po. CONCLUSIONS: 3D registration analysis of a range of bone microstructural parameters in longitudinal analysis of HR-pQCT showed good precision, offering potential for contributing to future research on osteoporosis and bone metabolic diseases.

Enhancement of low-spatial-frequency components by a new phase-contrast STEM using a probe formed with an amplitude Fresnel zone plate.

Electron microscopy is a powerful tool for visualizing the shapes of sub-nanometer objects. However, Contrast Transfer Function (CTF) principally restricts lower frequency components in the image. To overcome this problem, phase-plate techniques have been proposed and currently Hole Free Phase Plate (HFPP) and Volta Phase Plate (VPP) are widely used especially for biological specimens to retrieve low frequency information of the sample's potential distributions. In this report, we have developed a new phase-contrast scanning transmission electron microscope (STEM) in which a probe beam including side robes is formed with an amplitude Fresnel zone plate (FZP) and the interference patterns produced by the zero and first order diffracted waves generated by the FZP are detected. We name it FZP Phase Contrast STEM (FZP-PC-STEM) hereinafter. The amplitude FZP was manufactured by using focused ion beam (FIB) equipment, and the diffraction data were collected by using diffraction imaging technique. The validity of our proposed optical model was confirmed by comparing experimental and simulated images. Observations of carbon nanotube (CNT) bundles by using this method showed that the contrast of low-spatial-frequency components in the CNT image was significantly enhanced. This method does not, in principle, require the post-image processing used in the diffraction imaging method, and it can be easily introduced into pre-existing equipment without major modifications. The stability and robustness of the FZP inserted in condenser system were also confirmed during long-time operation. We expect that the FZP-PC-STEM will be widely applicable to high-contrast observations of low-Z samples with simple and easy operation.

Deterioration of bone microstructure by aging and menopause in Japanese healthy women: analysis by HR-pQCT.

INTRODUCTION: Second-generation high-resolution peripheral quantitative computed tomography (HR-pQCT) has provide higher quality of bone images with a voxel size of 61 µm, enabling direct measurements of trabecular thickness. In addition to the standard parameters, the non-metric trabecular parameters such as trabecular morphology (plate to rod-like structures), connectivity, and anisotropy can also be analyzed. The purpose of this study is to investigate deterioration of bone microstructure in healthy Japanese women by measuring standard and non-metric parameters using HR-pQCT. MATERIALS AND METHODS: Study participants were 61 healthy Japanese women (31-70 years). The distal radius and tibia were scanned using second-generation HR-pQCT, and microstructures of trabecular and cortical bone were measured. Non-metric trabecular parameters included structure model index (SMI), trabecular bone pattern factor (TBPf), connectivity density (Conn.D), number of nodes (N.Nd/TV), degree of anisotropy (DA), and star volume of marrow space (V*ms). Estimated bone strength was evaluated by micro finite element analysis. Associations between bone microstructure, estimated bone strength, age, and menopause were analyzed. RESULTS: Trabecular number declined with age, and trabecular separation increased. SMI and TBPf increased, Conn.D and N.Nd/TV declined, and V*ms increased. Cortical BMD and thickness declined with age, and porosity increased. Stiffness and failure load decreased with age. Cortical thickness and estimated bone strength were affected by menopause. Cortical thickness was most associated with estimated bone strength. CONCLUSIONS: Trabecular and cortical bone microstructure were deteriorated markedly with age. Cortical thickness decreased after menopause and was most related to bone strength. Non-metric parameters give additional information about osteoporotic changes of trabecular bone.