Yeasts volatile organic compounds (VOCs) as potential growth enhancers and molds biocontrol agents of mushrooms mycelia.

Volatile organic compounds (VOCs) produced by yeasts can positively affect crops, acting as antifungals or biostimulants. In this study, Aureobasidium pullulans and Metschnikowia pulcherrima were evaluated as potential antagonists of Trichoderma spp., common fungal pathogen in mushroom cultivation. To assess the biocontrol ability and biostimulant properties of the selected yeast species, in vitro co-culture and VOCs exposure assays were conducted. In both assays, VOCs produced by Aureobasidium spp. showed the stronger antifungal activity with a growth inhibition up to 30 %. This result was further confirmed by the higher volatilome alcohol content revealed by solid phase microextraction-gas chromatography mass spectrometry (SPME/GC-MS). Overall, Aureobasidium strains can be potentially used as biocontrol agent in Pleorotus ostreatus and Cyclocybe cylindracea mycelial growth, without affecting their development as demonstrated by VOCs exposure assay and Fourier-transform infrared spectroscopy (FT-IR). Conversely, M. pulcherrima was characterized by a lower or absent antifungal properties and by a volatilome composition rich in isobutyl acetate, an ester often recognized as plant growth promoter. As confirmed by FT-IR, Lentinula mycelia exposed to M. pulcherrima VOCs showed a higher content of proteins and lipids, suggesting an improvement of some biochemical properties. Our study emphasizes that VOCs produced by specific yeast strains are potentially powerful alternative to synthetic fungicide in the vegetative growth of mushroom-forming fungi and also able to modify their biochemical composition.

Reverse engineering DNA origami nanostructure designs from raw scaffold and staple sequence lists.

Designs for scaffolded DNA origami nanostructures are commonly and minimally published as the list of DNA staple and scaffold sequences required. In nearly all cases, high-level editable design files (e.g. caDNAno) which generated the low-level sequences are not made available. This de facto 'raw sequence' exchange format allows published origami designs to be re-attempted in the laboratory by other groups, but effectively stops designs from being significantly modified or re-purposed for new future applications. To make the raw sequence exchange format more accessible to further design and engineering, in this work we propose the first algorithmic solution to the inverse problem of converting staple/scaffold sequences back to a 'guide schematic' resembling the original origami schematic. The guide schematic can be used to aid the manual re-input of an origami into a CAD tool like caDNAno, hence recovering a high-level editable design file. Creation of a guide schematic can also be used to double check that a list of staple strand sequences does not have errors and indeed does assemble into a desired origami nanostructure prior to costly laboratory experimentation. We tested our reverse algorithm on 36 diverse origami designs from the literature and found that 29 origamis (81 %) had a good quality guide schematic recovered from raw sequences. Our software is made available at https://revnano.readthedocs.io.

Light-Up Split Broccoli Aptamer as a Versatile Tool for RNA Assembly Monitoring in Cell-Free TX-TL Systems, Hybrid RNA/DNA Origami Tagging and DNA Biosensing.

Binary light-up aptamers are intriguing and emerging tools with potential in different fields. Herein, we demonstrate the versatility of a split Broccoli aptamer system able to turn on the fluorescence signal only in the presence of a complementary sequence. First, an RNA three-way junction harbouring the split system is assembled in an E. coli-based cell-free TX-TL system where the folding of the functional aptamer is demonstrated. Then, the same strategy is introduced into a 'bio-orthogonal' hybrid RNA/DNA rectangle origami characterized by atomic force microscopy: the activation of the split system through the origami self-assembly is demonstrated. Finally, our system is successfully used to detect the femtomoles of a Campylobacter spp. DNA target sequence. Potential applications of our system include the real-time monitoring of the self-assembly of nucleic-acid-based devices in vivo and of the intracellular delivery of therapeutic nanostructures, as well as the in vitro and in vivo detection of different DNA/RNA targets.

Detection of Listeria monocytogenes in foods with a textile organic electrochemical transistor biosensor.

Foods contaminated by pathogens are responsible for foodborne diseases which have socioeconomic impacts. Many approaches have been extensively investigated to obtain specific and sensitive methods to detect pathogens in food, but they are often not easy to perform and require trained personnel. This work aims to propose a textile organic electrochemical transistor-based (OECT) biosensor to detect L. monocytogenes in food samples. The analyses were performed with culture-based methods, Listeria Precis™ method, PCR, and our textile OECT biosensor which used poly(3,4-ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS) (PEDOT:PSS) for doping the organic channel. Atomic force microscopy (AFM) was used to obtain topographic maps of the gold gate. The electrochemical activity on gate electrodes was measured and related to the concentration of DNA extracted from samples and hybridized to the specific capture probe immobilized onto the gold surface of the gate. This assay reached a limit of detection of 1.05 ng/µL, corresponding to 0.56 pM of L. monocytogenes ATCC 7644, and allowed the specific and rapid detection of L. monocytogenes in the analyzed samples. KEYPOINTS: • Textile organic electrochemical transistors functionalized with a specific DNA probe • AFM topographic and surface potential maps of a functionalized gold gate surface • Comparison between the Listeria monocytogenes Precis™ method and an OECT biosensor.

A last-in first-out stack data structure implemented in DNA.

DNA-based memory systems are being reported with increasing frequency. However, dynamic DNA data structures able to store and recall information in an ordered way, and able to be interfaced with external nucleic acid computing circuits, have so far received little attention. Here we present an in vitro implementation of a stack data structure using DNA polymers. The stack is able to record combinations of two different DNA signals, release the signals into solution in reverse order, and then re-record. We explore the accuracy limits of the stack data structure through a stochastic rule-based model of the underlying polymerisation chemistry. We derive how the performance of the stack increases with the efficiency of washing steps between successive reaction stages, and report how stack performance depends on the history of stack operations under inefficient washing. Finally, we discuss refinements to improve molecular synchronisation and future open problems in implementing an autonomous chemical data structure.

Cotranscriptional Folding of a Bio-orthogonal Fluorescent Scaffolded RNA Origami.

The scaffolded origami technique is an attractive tool for engineering nucleic acid nanostructures. This paper demonstrates scaffolded RNA origami folding in vitro in which, for the first time, all components are transcribed simultaneously in a single-pot reaction. Double-stranded DNA sequences are transcribed by T7 RNA polymerase into scaffold and staple strands able to correctly fold in a high synthesis yield into the nanoribbon. Synthesis is successfully confirmed by atomic force microscopy, and the unpurified transcription reaction mixture is analyzed by an in gel-imaging assay where the transcribed RNA nanoribbons are able to capture the specific dye through the reconstituted split Broccoli aptamer showing a clear green fluorescent band. Finally, we simulate the RNA origami in silico using the nucleotide-level coarse-grained model oxRNA to investigate the thermodynamic stability of the assembled nanostructure in isothermal conditions over a period of time. Our work suggests that the scaffolded origami technique is a viable, and potentially more powerful, assembly alternative to the single-stranded origami technique for future in vivo applications.

Is the existence of a mutualistic relationship between Lobesia botrana and Botrytis cinerea well-founded?

Some studies have highlighted benefits for Lobesia botrana by adding Botrytis cinerea mycelium to an artificial larval diet and have suggested a mutualistic relationship between the two organisms on grapevine, hypothesizing that fungal sterols were the nutritional factor involved. Because the nutritional quality of an artificial diet should be similar to grapes to allow extrapolation of the results to the field conditions, in the current study L. botrana larval performance was compared when larvae were fed on grapes (berries) or two artificial diets either with or without enrichment with B. cinerea. Based on sterol analysis, the two artificial diets had high cholesterol content, but relative to berries showed comparable and low phytosterol contents, respectively (high- and low-phytosterol, HPh, and LPh). While larval fitness on the HPh diet was similar to berries, the LPh diet led to higher mortality and worse larval performance. The addition of the fungus compensated for the shortage in the LPh diet but did not improve the HPh diet. Supplementing the LPh diet with linoleic acid, which is supplied also from B. cinerea, partially improved larval performance. In a field experiment, females did not show any egg-laying preferences towards naturally botrytized bunches. The positive effect of B. cinerea on the moth's next generation that is reported in the literature could be a consequence of fungus developed inside berry tunnels bored by larvae. Therefore, based on our data and previous reports the existence of a mutualistic relationship between L. botrana and B. cinerea is not well-founded.

Isothermal folding of a light-up bio-orthogonal RNA origami nanoribbon.

RNA presents intringuing roles in many cellular processes and its versatility underpins many different applications in synthetic biology. Nonetheless, RNA origami as a method for nanofabrication is not yet fully explored and the majority of RNA nanostructures are based on natural pre-folded RNA. Here we describe a biologically inert and uniquely addressable RNA origami scaffold that self-assembles into a nanoribbon by seven staple strands. An algorithm is applied to generate a synthetic De Bruijn scaffold sequence that is characterized by the lack of biologically active sites and repetitions larger than a predetermined design parameter. This RNA scaffold and the complementary staples fold in a physiologically compatible isothermal condition. In order to monitor the folding, we designed a new split Broccoli aptamer system. The aptamer is divided into two nonfunctional sequences each of which is integrated into the 5' or 3' end of two staple strands complementary to the RNA scaffold. Using fluorescence measurements and in-gel imaging, we demonstrate that once RNA origami assembly occurs, the split aptamer sequences are brought into close proximity forming the aptamer and turning on the fluorescence. This light-up 'bio-orthogonal' RNA origami provides a prototype that can have potential for in vivo origami applications.

Genomic Structural Variations Affecting Virulence During Clonal Expansion of Pseudomonas syringae pv. actinidiae Biovar 3 in Europe.

Pseudomonas syringae pv. actinidiae (Psa) biovar 3 caused pandemic bacterial canker of Actinidia chinensis and Actinidia deliciosa since 2008. In Europe, the disease spread rapidly in the kiwifruit cultivation areas from a single introduction. In this study, we investigated the genomic diversity of Psa biovar 3 strains during the primary clonal expansion in Europe using single molecule real-time (SMRT), Illumina and Sanger sequencing technologies. We recorded evidences of frequent mobilization and loss of transposon Tn6212, large chromosome inversions, and ectopic integration of IS sequences (remarkably ISPsy31, ISPsy36, and ISPsy37). While no phenotype change associated with Tn6212 mobilization could be detected, strains CRAFRU 12.29 and CRAFRU 12.50 did not elicit the hypersensitivity response (HR) on tobacco and eggplant leaves and were limited in their growth in kiwifruit leaves due to insertion of ISPsy31 and ISPsy36 in the hrpS and hrpR genes, respectively, interrupting the hrp cluster. Both strains had been isolated from symptomatic plants, suggesting coexistence of variant strains with reduced virulence together with virulent strains in mixed populations. The structural differences caused by rearrangements of self-genetic elements within European and New Zealand strains were comparable in number and type to those occurring among the European strains, in contrast with the significant difference in terms of nucleotide polymorphisms. We hypothesize a relaxation, during clonal expansion, of the selection limiting the accumulation of deleterious mutations associated with genome structural variation due to transposition of mobile elements. This consideration may be relevant when evaluating strategies to be adopted for epidemics management.

DNA origami nanorobot fiber optic genosensor to TMV.

In the quest of greater sensitivity and specificity of diagnostic systems, one continually searches for alternative DNA hybridization methods, enabling greater versatility and where possible field-enabled detection of target analytes. We present, herein, a hybrid molecular self-assembled scaffolded DNA origami entity, intimately immobilized via capture probes linked to aminopropyltriethoxysilane, onto a glass optical fiber end-face transducer, thus producing a novel biosensor. Immobilized DNA nanorobots with a switchable flap can then be actuated by a specific target DNA present in a sample, by exposing a hemin/G-quadruplex DNAzyme, which then catalyzes the generation of chemiluminescence, once the specific fiber probes are immersed in a luminol-based solution. Integrating organic nanorobots to inorganic fiber optics creates a hybrid system that we demonstrate as a proof-of-principle can be utilized in specific DNA sequence detection. This system has potential applications in a wide range of fields, including point-of-care diagnostics or cellular in vivo biosensing when using ultrathin fiber optic probes for research purposes.

Designing Uniquely Addressable Bio-orthogonal Synthetic Scaffolds for DNA and RNA Origami.

Nanotechnology and synthetic biology are rapidly converging, with DNA origami being one of the leading bridging technologies. DNA origami was shown to work well in a wide array of biotic environments. However, the large majority of extant DNA origami scaffolds utilize bacteriophages or plasmid sequences thus severely limiting its future applicability as a bio-orthogonal nanotechnology platform. In this paper we present the design of biologically inert (i.e., "bio-orthogonal") origami scaffolds. The synthetic scaffolds have the additional advantage of being uniquely addressable (unlike biologically derived ones) and hence are better optimized for high-yield folding. We demonstrate our fully synthetic scaffold design with both DNA and RNA origamis and describe a protocol to produce these bio-orthogonal and uniquely addressable origami scaffolds.

Draft genome of a Xanthomonas perforans strain associated with pith necrosis.

Xanthomonas perforans causes bacterial spot of tomato and pepper. A genome draft of an unusual isolate (strain 4P1S2), differing in that it was associated with stem pith necrosis, was assembled from Illumina MiSeq sequencing data using the draft of X. perforans strain 91-118 as a reference. The resulting draft (accession number JRWW00000000) largely overlapped with the reference draft. In addition, the reads not mapping on the reference assembly were selected and used for a further assembly, that revealed a large putative plasmid. The analysis of the predicted proteins showed only few gene features that could be potentially implicated in the switch of a phytopathological behavior.

Plasmon resonance tuning using DNA origami actuation.

A strategy for an innovative, continuous and reversible LSPR tuning using DNA origami actuation to modulate the nanometric separation of two gold nanoparticles has been developed. The actuation mechanism is based on DNA hybridization, in particular three different DNA sequences were shown to induce resonance shift of up to 6 nm.

Draft Genome Sequence of a Hypersensitive Reaction-Inducing Pantoea agglomerans Strain Isolated from Olive Knots Caused by Pseudomonas savastanoi pv. savastanoi.

Pantoea agglomerans strains inducing a hypersensitive reaction in tobacco leaves are frequently isolated inside olive knots caused by Pseudomonas savastanoi pv. savastanoi. Here, we report the draft genome sequence of the Italian P. agglomerans strain, which is able to increase olive knot disease severity when coinoculated with P. savastanoi pv. savastanoi.

A DNA origami nanorobot controlled by nucleic acid hybridization.

A prototype for a DNA origami nanorobot is designed, produced, and tested. The cylindrical nanorobot (diameter of 14 nm and length of 48 nm) with a switchable flap, is able to respond to an external stimulus and reacts by a physical switch from a disarmed to an armed configuration able to deliver a cellular compatible message. In the tested design the robot weapon is a nucleic acid fully contained in the inner of the tube and linked to a single point of the internal face of the flap. Upon actuation the nanorobot moves the flap extracting the nucleic acid that assembles into a hemin/G-quadruplex horseradish peroxidase mimicking DNAzyme catalyzing a colorimetric reaction or chemiluminescence generation. The actuation switch is triggered by an external nucleic acid (target) that interacts with a complementary nucleic acid that is beard externally by the nanorobot (probe). Hybridization of probe and target produces a localized structural change that results in flap opening. The flap movement is studied on a two-dimensional prototype origami using Förster resonance energy transfer and is shown to be triggered by a variety of targets, including natural RNAs. The nanorobot has potential for in vivo biosensing and intelligent delivery of biological activators.

Genome wide sequence analysis grants unbiased definition of species boundaries in "Candidatus Phytoplasma".

The phytoplasmas are currently named using the Candidatus category, as the inability to grow them in vitro prevented (i) the performance of tests, such as DNA-DNA hybridization, that are regarded as necessary to establish species boundaries, and (ii) the deposition of type strains in culture collections. The recent accession to complete or nearly complete genome sequence information disclosed the opportunity to apply to the uncultivable phytoplasmas the same taxonomic approaches used for other bacteria. In this work, the genomes of 14 strains, belonging to the 16SrI, 16SrIII, 16SrV and 16SrX groups, including the species "Ca. P. asteris", "Ca. P. mali", "Ca. P. pyri", "Ca. P. pruni", and "Ca. P. australiense" were analyzed along with Acholeplasma laidlawi, to determine their taxonomic relatedness. Average nucleotide index (ANIm), tetranucleotide signature frequency correlation index (Tetra), and multilocus sequence analysis of 107 shared genes using both phylogenetic inference of concatenated (DNA and amino acid) sequences and consensus networks, were carried out. The results were in large agreement with the previously established 16S rDNA based classification schemes. Moreover, the taxonomic relationships within the 16SrI, 16SrIII and 16SrX groups, that represent clusters of strains whose relatedness could not be determined by 16SrDNA analysis, could be comparatively evaluated with non-subjective criteria. "Ca. P. mali" and "Ca. P. pyri" were found to meet the genome characteristics for the retention into two different, yet strictly related species; representatives of subgroups 16SrI-A and 16SrI-B were also found to meet the standards used in other bacteria to distinguish separate species; the genomes of the strains belonging to 16SrIII were found more closely related, suggesting that their subdivision into Candidatus species should be approached with caution.

The influence of local factors on the prediction of fumonisin contamination in maize.

BACKGROUND: Contamination by mycotoxins is a major concern to the maize industry in north-east Italy where maize grain is often spoiled by Fusarium spp. In this work, fumonisins, deoxynivalenol and zearalenone were determined and an artificial neural network (ANN) model suitable for predicting mycotoxin contamination of maize at harvest time was developed. RESULTS: The occurrence of deoxynivalenol and zearalenone was very limited, while fumonisins concentration ranged from 163 and to 3663 µg kg(-1) in 2007, and from 333 to 11473 µg kg(-1) in 2008. Statistical data analysis of factors affecting fumonisins concentration revealed that irrigation, chemical treatment against the European corn borer and harvest date significantly affected the level of contamination (P < 0.05), although the relevance of the factors was different in 2007 and 2008. The neural network approach showed a significant correlation between ascertained values and predictions based on agronomic data. CONCLUSION: This is the first time that an artificial neural network has been used to predict fumonisin accumulation in maize: the prediction has been shown to have the potential for the development of a new approach for the rapid cataloging of grain lots.

Air analysis in the assessment of fumonisin contamination risk in maize.

BACKGROUND: In maize-growing areas where fumonisin contamination is endemic, there is an urgent need for novel methods to assess the quality of grain lots before their delivery to common drying and storage collection centres. Aerobiological samples of fungal spores released during harvest were analysed to establish a relationship between fumonisin contamination and the abundance of pathogen propagules collected in the combine harvester using a cyclone and membrane filters. Filter-captured propagules were analysed by direct plating, immunoenzymatic assay of specific Fusarium extracellular polysaccharides and real time polymerase chain reaction of the extracted DNA using fum1, a gene involved in the biosynthesis of fumonisin, as a target. RESULTS: The results showed that time of harvest and environmental conditions strongly influenced the efficiency and performance of the collection system. The data obtained were informative in comparing individual samples collected under similar conditions. The immunoenzymatic assay provided the most reliable data, which improved the ability of a neural network to predict the fumonisin content of lots, when added to agronomic, environmental and phytosanitary data. CONCLUSION: This is the first attempt to evaluate the Fusarium propagules dispersed during harvesting as a predictive means to assess maize quality. A method based on cyclone/filter capture and immunological detection has been shown to be feasible and to have the potential for the development of a continuous monitoring system, but the prediction capabilities in the present implementation were limited.

Ochratoxin A-producing strains of Penicillium spp. isolated from grapes used for the production of "passito" wines.

The post-harvest mycobiota of dried grapes, used in Friuli Venezia Giulia (Northern-East Italy) for the production of "passito" dessert wines, was investigated in order to detect potential ochratoxin A (OTA)-producers. Five grape cultivars were analysed and only isolates belonging to the genera Aspergillus and Penicillium were evaluated. No Aspergillus spp. was found while 379 strains of Penicillium spp. were isolated. Four strains produced UV fluorescent metabolites on grape juice agar and synthetic liquid media as observed by thin-layer chromatography (TLC). Three of these resulted OTA producers when analyzed by high pressure liquid chromatography (HPLC), following immunoaffinity column purification. According to the results of morphological examinations and ribosomal DNA sequencing, the OTA producer strains did not belong to the species P. verrucosum or P. nordicum. The corresponding passito wines did not contain OTA.