Environmental prospective of valorizing corn processing effluent to produce ferulic acid grafted chitosan polymer.

The food industry requires new production models that include more environmentally friendly waste management practices, considering that the environmental loads of solid waste and wastewater associated with this sector cause damage to the receiving ecosystems. The approach considered in this study focuses on the design and environmental assessment of an enzymatic process for the valorization of ferulic acid present in the effluent of a corn tortilla plant. The ferulic acid can be immobilized on chitosan so that the ferulic acid grafted chitosan can be used as a bioactive film with enhanced antioxidant properties with potential applications in the biotechnology sector. Its real projection approach requires the evaluation of its environmental and economic performance, trying to identify its benefits and potential in the value chain, using the Techno-Economic Analysis (TEA) as a phase for the conceptual design of the process and the Life Cycle Assessment (LCA) methodology for the environmental evaluation. It should be noted that the TEA indicators are promising, since the values of the financial indicators obtained are representative of the economic profitability, which makes the ferulic acid valorization a viable process. In terms of the environmental impact of the process, the buffer dose and the chitosan production process are identified as the main critical points. This double benefit in environmental and economic terms shows that the valorization of ferulic acid for chitosan functionalization is a promising alternative to improve the sustainability performance of corn processing.

Metabolic and ultrastructural renal changes in adult Wistar rats fed by a cafeteria diet.

PURPOSE: To evaluate, by quantitative and qualitative methods, the glomerular ultrastructure in Wistar rats fed a cafeteria diet. METHODS: Male Wistar rats were divided into two groups at 21 days of age: control (C, n = 10) and cafeteria diet (CAF, n = 8). The animals were followed up until 5 months of age, followed by euthanasia. The blood, kidneys, and fat deposits--epididymal, retroperitoneal, and subcutaneous--were extracted and analyzed. Data were analyzed by Student's t test, and p < 0.05 was considered statistically significant. RESULTS: The cafeteria diet promoted glucose intolerance, hyperglycemia (p < 0.0001), and deposition of retroperitoneal fat (p < 0.005). Scanning electron microscopy revealed that the length of the foot process was similar in both groups. The quantitative analyses by transmission electron microscopy revealed that the cafeteria diet reduced the thickness of the glomerular basement membrane (p < 0.05). CONCLUSIONS: The intake of lipids and simple carbohydrates were found to be associated with alteration in the glomerular ultrastructure. However, more studies are needed to evaluate not only the effects of high-protein and high-fat diets on components of the glomerular filtration barrier, but also renal physiology.

Acinetobacter baumannii, a Multidrug-Resistant Opportunistic Pathogen in New Habitats: A Systematic Review.

In recent years, humanity has begun to face a growing challenge posed by a rise in the prevalence of antibiotic-resistant bacteria. This has resulted in an alarming surge in fatalities and the emergence of increasingly hard-to-manage diseases. Acinetobacter baumannii can be seen as one of these resilient pathogens due to its increasing prevalence in hospitals, its resistance to treatment, and its association with elevated mortality rates. Despite its clinical significance, the scientific understanding of this pathogen in non-hospital settings remains limited. Knowledge of its virulence factors is also lacking. Therefore, in this review, we seek to shed light on the latest research regarding the ecological niches, microbiological traits, and antibiotic resistance profiles of Acinetobacter baumannii. Recent studies have revealed the presence of this bacterium in a growing range of environmental niches, including rivers, treatment plants, and soils. It has also been discovered in diverse food sources such as meat and vegetables, as well as in farm animals and household pets such as dogs and cats. This broader presence of Acinetobacter baumannii, i.e., outside of hospital environments, indicates a significant risk of environmental contamination. As a result, greater levels of awareness and new preventive measures should be promoted to address this potential threat to public health.

Revolutionizing Three-Dimensional Printing: Enhancing Quality Assurance and Point-of-Care Integration through Instrumentation.

Three-dimensional printing in the field of additive manufacturing shows potential for customized medicines and solving gaps in paediatric formulations. Despite successful clinical trials, 3D printing use in pharmaceutical point-of-care is limited by regulatory loopholes and a lack of Pharmacopoeia guidelines to ensure quality. Semi-solid extrusion is a 3D printing technology that stands out for its versatility, but understanding the fluid dynamics of the semi-solid mass is critical. The aim of this research is to look into the advantages of instrumenting a 3D printer with a semi-solid extrusion motor-driven printhead, which is able to record the printing pressure over time, for in situ characterization of the semi-solid mass and quality evaluation of dosage forms. Four formulations using hydrochlorothiazide as the active pharmaceutical ingredient and several excipients were used. Their flow properties were studied at different printing speeds and temperatures using traditional techniques (rheometer and Texture Analyzer) and the proposed semi-solid extrusion motor-driven printhead incorporated into a printing platform. In addition, the influence of printing speed in the printing process was also evaluated by the study of printing pressure and printlet quality. The results demonstrated the similarities between the use of a Texture Analyzer and the semi-solid extrusion motor-driven. However, the latter enables temperature selection and printing speed in accordance with the printing process which are critical printing parameters. In addition, due to the incorporation of a sensor, it was possible to conclude, for the first time, that there is a link between changes in essential printing parameters like printing speed or formulations and variations in printing pressure and printlet quality attributes such as the energy require to obtain a single dosage unit, weight or diameter. This breakthrough holds a lot of potential for assuring the quality of 3D printing dosage forms and paving the way for their future incorporation into point-of-care settings.

A microfluidic card-based electrochemical assay for the detection of sulfonamide resistance genes.

Most electroanalytical detection schemes for DNA markers require considerable time and effort from expert personnel to thoroughly follow the analysis and obtain reliable outcomes. This work aims to present an electrochemical assay performed inside a small card-based platform powered by microfluidic manipulation, requiring minimal human intervention and consumables. The assay couples a sample/signal dual amplification and DNA-modified magnetic particles for the detection of DNA amplification products. Particularly, the sul1 and sul4 genes involved in the resistance against sulfonamide antibiotics were analyzed. As recognized by the World Health Organization, antimicrobial resistance threatens global public health by hampering medication efficacy against infections. Consequently, analytical methods for the determination of such genes in environmental and clinical matrices are imperative. Herein, the resistance genes were extracted from E. coli cells and amplified using an enzyme-assisted isothermal amplification at 37 °C. The amplification products were analyzed in an easily-produced, low-cost, card-based set-up implementing a microfluidic system, demanding limited manual work and small sample volumes. The target amplicon was thus captured and isolated using versatile DNA-modified magnetic beads injected into the microchannel and exposed to the various reagents in a continuously controlled microfluidic flow. After the optimization of the efficiency of each phase of the assay, the platform achieved limits of detections of 44.2 pmol L-1 for sul1 and 48.5 pmol L-1 for sul4, and was able to detect down to ≥500-fold diluted amplification products of sul1 extracted from E. coli living cells in around 1 h, thus enabling numerous end-point analyses with a single amplification reaction.

Maintaining the permanence principle of death during normothermic regional perfusion in controlled donation after the circulatory determination of death: Results of a prospective clinical study.

One concern about the use of normothermic regional perfusion (NRP) in controlled donation after the circulatory determination of death (cDCD) is that the brain may be perfused. We aimed to demonstrate that certain technical maneuvers preclude such brain perfusion. A nonrandomized trial was performed on cDCD donors. In abdominal normothermic regional perfusion (A-NRP), the thoracic aorta was blocked with an intra-aortic occlusion balloon. In thoracoabdominal normothermic regional perfusion (TA-NRP), the arch vessels were clamped and the cephalad ends vented to the atmosphere. The mean intracranial arterial blood pressure (ICBP) was invasively measured at the circle of Willis. Ten cDCD donors subject to A-NRP or TA-NRP were included. Mean ICBP and mean blood pressure at the thoracic and the abdominal aorta during the circulatory arrest were 17 (standard deviation [SD], 3), 17 (SD, 3), and 18 (SD, 4) mmHg, respectively. When A-NRP started, pressure at the abdominal aorta increased to 50 (SD, 13) mmHg, while the ICBP remained unchanged. When TA-NRP was initiated, thoracic aorta pressure increased to 71 (SD, 18) mmHg, but the ICBP remained unmodified. Recorded values of ICBP during NRP were 10 mmHg. In conclusion, appropriate technical measures applied during NRP preclude perfusion of the brain in cDCD. This study might help to expand NRP and increase the number of organs available for transplantation.

Evaluation of an automatized AMBU ESSI-1 INC designed at the Instituto Nacional de Cardiología Ignacio Chávez / Evaluación del AMBU automatizado ESSI-1 INC diseñado en el Instituto Nacional de Cardiología Ignacio Chávez

Abstract Objective: The objectives of this study were to evaluate an automated device for ventilatory support based on AMBU manufactured in March 2020. Methods: The ESSI-1 INC was evaluated through pulmonary mechanics and physiology parameters through compensatory spirometer tests (TISSOTs), and an artificial lung Model5600i Dual Adult PNEU VIEW SYSTEM; it was also compared to the anesthetic ventilatory support equipment (AEONMED 7500) in porcine models, measuring ventilatory, hemodynamic and gasometric parameters. Results: This equipment (ESSI-1 INC) was successfully tested by mechanical and biological models, such as pigs in which its performance was evaluated in terms of variability of tidal volume, ventilation frequency, and I/E relationship versus the manual performance of two medical interns. All the results turned out as expected and were satisfactory. Conclusions: It is safe and effective equipment and should be tested and used in diverse clinical conditions to standardize the ventilatory safety and care of patients who require it.

Resumen Objetivo: Evaluar un dispositivo automatizado para la asistencia ventilatoria basado en un AMBU manufacturado en Marzo del 2020. Métodos: El ESSI-1 INC fue evaluado por medio de parámetros fisiológicos y mecánica pulmonar a través de pruebas de espirómetro compensatorios (TISSOT); pulmón artificial (Modelo 5600i Dual Adult PNEU VIEW SYSTEM); así como su desempeño comparado a la máquina de anestesia (AEONMED 7500) en modelos porcinos, midiendo criterios ventilatorios, hemodinámicos y gasométricos. Resultados: Este equipo (ESSI-1 INC) fue exitosamente probado por modelos mecánicos y biológicos, tales como cerdos donde su desempeño fue evaluado en términos de la variabilidad del volumen tidal, frecuencia ventilatoria, y relación I/E versus el desempeño manual de dos médicos. Todos los resultados finalizaron como se esperaba de forma satisfactoria. Conclusiones: Es un equipo seguro y efectivo, el cual debería ser probado y usado en distintas condiciones clínicas para estandarizar la seguridad ventilatoria y cuidado de pacientes que lo requieran.

Evaluation of an automatized AMBU ESSI-1 INC designed at the Instituto Nacional de Cardiología Ignacio Chávez.

OBJECTIVE: The objectives of this study were to evaluate an automated device for ventilatory support based on AMBU manufactured in March 2020. METHODS: The ESSI-1 INC was evaluated through pulmonary mechanics and physiology parameters through compensatory spirometer tests (TISSOTs), and an artificial lung Model5600i Dual Adult PNEU VIEW SYSTEM; it was also compared to the anesthetic ventilatory support equipment (AEONMED 7500) in porcine models, measuring ventilatory, hemodynamic and gasometric parameters. RESULTS: This equipment (ESSI-1 INC) was successfully tested by mechanical and biological models, such as pigs in which its performance was evaluated in terms of variability of tidal volume, ventilation frequency, and I/E relationship versus the manual performance of two medical interns. All the results turned out as expected and were satisfactory. CONCLUSIONS: It is safe and effective equipment and should be tested and used in diverse clinical conditions to standardize the ventilatory safety and care of patients who require it.

OBJETIVO: Evaluar un dispositivo automatizado para la asistencia ventilatoria basado en un AMBU manufacturado en Marzo del 2020. MÉTODOS: El ESSI-1 INC fue evaluado por medio de parámetros fisiológicos y mecánica pulmonar a través de pruebas de espirómetro compensatorios (TISSOT); pulmón artificial (Modelo 5600i Dual Adult PNEU VIEW SYSTEM); así como su desempeño comparado a la máquina de anestesia (AEONMED 7500) en modelos porcinos, midiendo criterios ventilatorios, hemodinámicos y gasométricos. RESULTADOS: Este equipo (ESSI-1 INC) fue exitosamente probado por modelos mecánicos y biológicos, tales como cerdos donde su desempeño fue evaluado en términos de la variabilidad del volumen tidal, frecuencia ventilatoria, y relación I/E versus el desempeño manual de dos médicos. Todos los resultados finalizaron como se esperaba de forma satisfactoria. CONCLUSIONES: Es un equipo seguro y efectivo, el cual debería ser probado y usado en distintas condiciones clínicas para estandarizar la seguridad ventilatoria y cuidado de pacientes que lo requieran.

Consequences of gaining an extra chromosome.

Mistakes in chromosome segregation leading to aneuploidy are the primary cause of miscarriages in humans. Excluding sex chromosomes, viable aneuploidies in humans include trisomies of chromosomes 21, 18, or 13, which cause Down, Edwards, or Patau syndromes, respectively. While individuals with trisomy 18 or 13 die soon after birth, people with Down syndrome live to adulthood but have intellectual disabilities and are prone to multiple diseases. At the cellular level, mistakes in the segregation of a single chromosome leading to a cell losing a chromosome are lethal. In contrast, the cell that gains a chromosome can survive. Several studies support the hypothesis that gaining an extra copy of a chromosome causes gene-specific phenotypes and phenotypes independent of the identity of the genes encoded within that chromosome. The latter, referred to as aneuploidy-associated phenotypes, are the focus of this review. Among the conserved aneuploidy-associated phenotypes observed in yeast and human cells are lower viability, increased gene expression, increased protein synthesis and turnover, abnormal nuclear morphology, and altered metabolism. Notably, abnormal nuclear morphology of aneuploid cells is associated with increased metabolic demand for de novo synthesis of sphingolipids. These findings reveal important insights into the possible pathological role of aneuploidy in Down syndrome. Despite the adverse effects on cell physiology, aneuploidy is a hallmark of cancer cells. Understanding how aneuploidy affects cell physiology can reveal insights into the selective pressure that aneuploid cancer cells must overcome to support unlimited proliferation.

Characterization and Validation of a New 3D Printing Ink for Reducing Therapeutic Gap in Pediatrics through Individualized Medicines.

3D printing technology can be used to develop individualized medicines in hospitals and pharmacies, allowing a high degree of personalization and the possibility to adjust the dose of the API based on the quantity of material extruded. The main goal of incorporating this technology is to have a stock of API-load print cartridges that could be used at different storage times and for different patients. However, it is necessary to study the extrudability, stability, and buildability of these print cartridges during storage time. A paste-like formulation containing hydrochlorothiazide as a model drug was prepared and distributed in five print cartridges, each of which was studied for different storage times (0 h-72 h) and conditions, for repeated use on different days. For each print cartridge, an extrudability analysis was performed, and subsequently, 100 unit forms of 10 mg hydrochlorothiazide were printed. Finally, various dosage units containing different doses were printed, taking into account the optimized printing parameters based on the results of the extrudability analysis carried out previously. An appropriate methodology for the rapid development of appropriate SSE 3DP inks for pediatrics was established and evaluated. The extrudability analysis and several parameters allowed the detection of changes in the mechanical behavior of the printing inks, the pressure interval of the steady flow, and the selection of the volume of ink to be extruded to obtain each of the required doses. The print cartridges were stable for up to 72 h after processing, and orodispersible printlets containing 6 mg to 24 mg of hydrochlorothiazide can be produced using the same print cartridge and during the same printing process with guaranteed content and chemical stability. The proposed workflow for the development of new printing inks containing APIs will allow the optimization of feedstock material and human resources in pharmacy or hospital pharmacy services, thus speeding up their development and reducing costs.

Current status of pancreatic cancer with oligometastasis.

BACKGROUND: Pancreatic cancer is the seventh leading cause of death worldwide, with ductal adenocarcinoma as the most frequent neoplasm. Half of the patients who are diagnosed have metastases at the time of diagnosis. OBJECTIVE: A review of the treatment of resectable pancreatic adenocarcinoma with oligometastatic disease was carried out in order to present an overview of the existing evidence. METHOD: A bibliographic search was carried in PubMed/Medline, Clinical Key and Index Medicus vhith MESH terms, from the year 1993 to 2022. RESULTS: Patients with liver or lung metastases due to pancreatic ductal adenocarcinoma who undergo surgery and chemotherapy have a longer survival in carefully selected patients. CONCLUSIONS: The evidence regarding surgery in patients with pancreatic ductal adenocarcinoma and oligometastasis is limited and further randomized controlled trials are needed for both scenarios. As well as established criteria that help the selection of patients who can receive this type of treatment.

ANTECEDENTES: El cáncer pancreático es la séptima causa de muerte en el mundo, siendo el adenocarcinoma ductal del páncreas la neoplasia más frecuente. La mitad de los pacientes que son diagnosticados presentan metástasis al momento del diagnóstico. OBJETIVO: Se realizó una revisión sobre el tratamiento del adenocarcinoma pancreático resecable con enfermedad oligometastásica con el fin de presentar un panorama sobre la evidencia existente. MÉTODO: Se realizó una búsqueda bibliográfica en PubMed/Medline, Clinical Key e Index Medicus con términos MESH desde 1993 hasta 2022. RESULTADOS: Los pacientes con metástasis hepáticas o pulmonares por adenocarcinoma ductal de páncreas que son sometidos a cirugía y quimioterapia tienen una mayor sobrevida en casos cuidadosamente seleccionados. CONCLUSIONES: La evidencia respecto a la cirugía en pacientes con adenocarcinoma ductal de páncreas y oligometástasis es limitada y se necesitan ensayos controlados aleatorizados adicionales para ambos escenarios, así como criterios bien establecidos que ayuden a la selección de los pacientes que pueden recibir este tipo de tratamiento.

Enhanced Vulnerability of Diabetic Mice to Hypervirulent Streptococcus agalactiae ST-17 Infection.

Streptococcus agalactiae (Group B Streptococcus, GBS) is the leading cause of neonatal sepsis and meningitis but has been recently isolated from non-pregnant adults with underlying medical conditions like diabetes. Despite diabetes being a key risk factor for invasive disease, the pathological consequences during GBS infection remain poorly characterized. Here, we demonstrate the pathogenicity of the GBS90356-ST17 and COH1-ST17 strains in streptozotocin-induced diabetic mice. We show that GBS can spread through the bloodstream and colonize several tissues, presenting a higher bacterial count in diabetic-infected mice when compared to non-diabetic-infected mice. Histological sections of the lungs showed inflammatory cell infiltration, collapsed septa, and red blood cell extravasation in the diabetic-infected group. A significant increase in collagen deposition and elastic fibers were also observed in the lungs. Moreover, the diabetic group presented red blood cells that adhered to the valve wall and disorganized cardiac muscle fibers. An increased expression of KC protein, IL-1ß, genes encoding immune cell markers, and ROS (reactive oxygen species) production was observed in diabetic-infected mice, suggesting GBS promotes high levels of inflammation when compared to non-diabetic animals. Our data indicate that efforts to reverse the epidemic of diabetes could considerably reduce the incidence of invasive infection, morbidity and mortality due to GBS.

Kidney transplantation reduces the risk of chronic limb threatening ischemia and amputation among patients with end-stage renal disease on hemodialysis.

OBJECTIVE: This study aimed to analyze the risk of chronic limb threatening ischemia (CLTI) or amputation among patients with end-stage renal disease (ESRD) entering a hemodialysis (HD) program and to evaluate the protective effect associated with kidney transplantation (KT). DESIGN, MATERIAL AND METHODS: Retrospective cohort of all consecutive ESRD patients entering into a HD program at our institution between 2000 and 2010. Collected variables included baseline characteristics (pre-entry in hemodialysis), time on HD program, KT and the composite outcome of chronic limb threatening ischemia or need for any amputation (CLTI/AMP). Patients with previous symptomatic peripheral arterial disease or amputation were excluded. RESULTS: The study group included 336 patients (mean age 63 years, 66% male). The mean follow up was 6.7 years with an average time on HD of 4.2 years. Ninety two patients (27.4 %) underwent transplantation. CLTI free survival rates were 90.3 % and 82.6 % at 5 and 10 years, respectively. The episodes of CLT involved 28 revascularization procedures (17 endovascular and 11 open surgeries), 18 minor amputations and 20 major amputations. KT was associated with a protective effect over the development of CLTI (HR: 0.065; CI 95% 0.02-0.21) after adjustment for confounding factors. The long-term survival of non-transplanted patients was 45 % and 15 % at 5 and 10 years, respectively and the long-term survival in transplanted patients was 89% and 80% at 5 and 10 years, respectively; but decreased to 47 % at 1 year and 18.2 % at 5 years once CLTI occurred. CONCLUSION: Patients on HD program show a notorious risk of chronic limb threatening ischemia or amputation over time. Once this complication occurs, patient's survival is markedly reduced. Transplantation confers an independent protective effect over the development of chronic limb threatening ischemia or amputation.

A Structural Analysis of Host-Parasite Interactions in Achatina fulica (Giant African Snail) Infected with Angiostrongylus cantonensis.

Angiostrongylus cantonensis is a nematode parasite that resides in the pulmonary arteries of rodents, serving as its definitive hosts. The life cycle involves several species of non-marine gastropods as intermediate hosts, and the African giant snail Achatina fulica is considered one of the most important around the world. Experimental data concerning A. cantonensis infection in the African giant snail remains notably limited. This helminth causes eosinophilic meningitis or meningoencephalitis in humans, representing an emergent zoonosis in Brazil. Understanding the host-parasite relationship through the application of new tools is crucial, given the complex interaction between zoonosis and the intricate mechanisms involving wild/human hosts, parasite adaptation, and dispersion. The objective of this study was to employ SEM as a novel methodology to understand the structural organization of the host tissue, particularly the granuloma formation. This sheds light on the complex balance between A. fulica and A. cantonensis. Nine three-month-old snails were randomly selected and exposed for 24 h to a concentration of 2000 L1/dose of A. cantonensis. A necropsy was performed 37 days after the infection, and the samples were examined using light and scanning electron microscopy (SEM). The histopathological results revealed third-stage larvae of A. cantonensis associated with granulomas distributed throughout the head-foot mass, mantle, and kidney. Scanning electron microscopy of the histological section surface showed that the granuloma is surrounded by a cluster of spherical particles, which are distributed in the region bordering the larvae. This reveal details of the nematode structure, demonstrating how this methodology can enhance our understanding of the role of granulomas in molluscan tissue. The structural characteristics of granuloma formation in A. fulica suggest it as an excellent invertebrate host for A. cantonensis. This relationship appears to provide protection to the parasite against the host's immune defense system while isolating the snail's tissue from potential exposure to nematode antigens.

Seguridad y eficacia de la bioprótesis de válvula cardiaca INC en humanos / Safety and efficacy of the INC bioprosthetic heart valve in humans

Resumen Introducción: Las bioprótesis de válvulas cardiacas son el estándar de oro para el reemplazo quirúrgico de la válvula aórtica en pacientes seleccionados. Objetivo: Evaluar la seguridad y eficacia de la válvula cardiaca bioprotésica del Instituto Nacional de Cardiología (INC) en humanos. Métodos: Estudio unicéntrico que incluyó 341 pacientes que se sometieron a reemplazo valvular quirúrgico único de válvula aórtica con válvula INC. Resultados: Se realizaron 318 implantes de novo (93 %) y 23 como segunda cirugía (7 %); las puntuaciones STS fueron de 1.4 y 1.8 % y el seguimiento de 42 y 46 meses, respectivamente. No existieron diferencias en las complicaciones ni en la tasa de implantación de marcapasos. Ambos grupos mantuvieron una FEVI normal. Se observó mejoría global en la clase funcional con empeoramiento solo en dos pacientes del grupo de novo. La disfunción de la prótesis INC que ameritó reintervención quirúrgica se observó en ocho pacientes (4.65 %) del grupo de novo versus un paciente (7.69 %) con segunda cirugía. Conclusiones: La válvula cardiaca INC es eficaz y segura, se asocia a baja tasa de complicaciones y mejoría de la clase funcional durante el seguimiento a largo plazo. Se necesitan estudios prospectivos comparativos de esta válvula.

Abstract Introduction: Heart valve bioprostheses are the gold standard for aortic valve surgical replacement in selected patients. Objective: To evaluate the safety and efficacy of the of the National Institute of Cardiology (INC) bioprosthetic heart alve of the National Institute of Cardiology (INC) bioprosthetic heart valve in humans. Methods: Single-center study that ncluded 341 patients who underwent single surgical aortic valve replacement with INC heart valve. Results: 318 implants were performed de novo (93%) and 23 as redo surgery (7%); STS scores were 1.4 and 1.8%, and follow-up was for 42 and 46 months, respectively. There were no differences in clinical complications or pacemaker implantation rate. Both groups maintained a normal LVEF. Overall improvement in functional class was observed, with worsening only in two patients of the de novo group. INC prosthesis dysfunction requiring surgical reintervention was observed in eight patients (4.65%) of the de novo group vs. one patient in the redo group. Conclusions: The INC heart valve is efficacious and safe, and is associated with a The INC heart valve is efficacious and safe, and is associated with a low rate of complications and functional class improvement during long-term follow-up. Prospective, comparative studies of this valve are required.

Integrating pressure sensor control into semi-solid extrusion 3D printing to optimize medicine manufacturing.

Semi-solid extrusion (SSE) is a three-dimensional printing (3DP) process that involves the extrusion of a gel or paste-like material via a syringe-based printhead to create the desired object. In pharmaceuticals, SSE 3DP has already been used to manufacture formulations for human clinical studies. To further support its clinical adoption, the use of a pressure sensor may provide information on the printability of the feedstock material in situ and under the exact printing conditions for quality control purposes. This study aimed to integrate a pressure sensor in an SSE pharmaceutical 3D printer for both material characterization and as a process analytical technology (PAT) to monitor the printing process. In this study, three materials of different consistency were tested (soft vaseline, gel-like mass and paste-like mass) under 12 different conditions, by changing flow rate, temperature, or nozzle diameter. The use of a pressure sensor allowed, for the first time, the characterization of rheological properties of the inks, which exhibited temperature-dependent, plastic and viscoelastic behaviours. Controlling critical material attributes and 3D printing process parameters may allow a quality by design (QbD) approach to facilitate a high-fidelity 3D printing process critical for the future of personalized medicine.

Three-Dimensional Models of Soil-Transmitted Helminth Eggs from Light Microscopy Images.

The World Health Organization indicates that more than 1.5 billion people are infected with geohelminths. Soil-transmitted helminths prevail mostly in tropical and subtropical regions, in areas with inadequate hygiene and sanitation conditions, and basic health education problems. Nematode eggs are structures of resistance and infection by fecal-oral transmission. When STH eggs are ingested, they can infect the potential host, causing abdominal pain, diarrhea, anemia, malnutrition, and physical-cognitive impacts in children. Taking advantage of the increasing employment of three-dimensional models of these structured based on light microscopy images to improve the research area and education could be an alternative to improve health education and spread scientific information on transmission and prevention. The objective of this work was to produce 3D printed models from bi-dimensional images of eggs based on their real morphological and morphometric characteristics. The virtual models were reconstructed from the acquisition and selection of images obtained using light microscopy. After selecting referential images, we constructed the models based on the vectorization of the egg structures. After vectorization, 3D modeling was performed and printed in PLA. 3D models have a high potential to contribute to the advanced morphological studies and teaching of parasitological sciences, enriching the teaching-learning process applicable in presential or remote teaching of basic education, undergraduate, and post-graduation classes.

A cost-effectiveness analysis of the introduction of a specialised consultation with duplex ultrasound assessment prior to vascular access surgery for haemodialysis.

INTRODUCTION: Duplex ultrasound (DUS) is increasingly used before vascular access (VA) surgery for haemodialysis. However, the cost-effectiveness of this approach is unknown. Our objective was to assess whether the introduction of a specialised consultation with DUS assessment modifies the cost and the time delay to achieve a first VA valid for haemodialysis. PATIENTS AND METHODS: Prospective cohort of patients undergoing a first VA (June 2014-July 2017) after a specialised consultation with DUS (ECO group). They were compared with a historical cohort (January 2012-May 2014) where VA was indicated exclusively by clinical evaluation (CLN group). We analysed the cost related to visits, DUS assessments, interventions, hospital admissions and graft materials to achieve a first VA valid for haemodialysis at least during 1 month. RESULTS: 86 patients in the CLN group were compared with 92 in the ECO group. Patients in the ECO group were younger (68.4 vs. 64.0 years; P=.038) but no other differences were seen among groups. The average cost to achieve a first AV valid for haemodialysis was significantly lower in the ECO group (2707 vs. 3347€; P=.024). There was a higher cost associated with DUS assessments in the ECO group yet the CLN group had a higher cost related to follow-up visits, successive surgical interventions, prosthetic material, days of hospital admission and catheters. The mean time needed to achieve a first AV valid for haemodialysis was also shorter in the ECO group (49.9 vs. 82.9 days, P=.002). CONCLUSION: The introduction of a specialised vascular access consultation with DUS prior to VA surgery has reduced the cost necessary to achieve a first VA valid for haemodialysis. From the patient's point of view this has meant less interventions and hospital admissions and a shortening of the time delay.

De novo sphingolipid biosynthesis necessitates detoxification in cancer cells.

Sphingolipids play important signaling and structural roles in cells. Here, we find that during de novo sphingolipid biosynthesis, a toxic metabolite is formed with critical implications for cancer cell survival. The enzyme catalyzing the first step in this pathway, serine palmitoyltransferase complex (SPT), is upregulated in breast and other cancers. SPT is dispensable for cancer cell proliferation, as sphingolipids can be salvaged from the environment. However, SPT activity introduces a liability as its product, 3-ketodihydrosphingosine (3KDS), is toxic and requires clearance via the downstream enzyme 3-ketodihydrosphingosine reductase (KDSR). In cancer cells, but not normal cells, targeting KDSR induces toxic 3KDS accumulation leading to endoplasmic reticulum (ER) dysfunction and loss of proteostasis. Furthermore, the antitumor effect of KDSR disruption can be enhanced by increasing metabolic input (via high-fat diet) to allow greater 3KDS production. Thus, de novo sphingolipid biosynthesis entails a detoxification requirement in cancer cells that can be therapeutically exploited.

Microbes associated with spontaneous cacao fermentations - A systematic review and meta-analysis.

Chocolate is a product of the fermentation of cacao beans. Performed on-farm or at local cooperatives, these are spontaneous cacao fermentations (SCFs). To better understand SCFs, this study sought to identify SCF microbes, their interrelationships, and other key parameters that influence fermentation. This is important because differences in fermentation can have an impact on final product quality. In this study, a systematic data extraction was performed, searching for literature that identified microbes from SCFs. Each unique microbe, whether by location or by fermentation material, was extracted from the articles, along with parameters associated with fermentation. Data were collected and analyzed for three interactions: microbe-to-geography, microbe-to-fermentation method, and microbe-to-microbe. The goal was to attribute microbes to geographical locations, fermentation materials, or to other microbes. Statistically significant relationships will reveal target areas for future research. Over 1700 microbes (440 unique species) were identified across 60 articles. The top three countries represented are Brazil (22 articles, n = 612 microbes), the Ivory Coast (14 articles, n = 237), and Ghana (10 articles, n = 257). Several countries were far less, or never represented, and should be considered for future research. No specific relationship was identified with microbes to either geographical location or fermentation method. Using a Presence-Absence chart, 127 microbe-to-microbe interactions were identified as statistically significant. Data extraction into SCF research has revealed major gaps of knowledge for the cacao microbiome. By better understanding the cacao microbiome, researchers will be able to identify key microbes and fermentation parameters to better influence the fermentation.