RESUMEN
In the context of neurorehabilitation, there have been rapid and continuous improvements in sensors-based clinical tools to quantify limb performance. As a result of the increasing integration of technologies in the assessment procedure, the need to integrate evidence-based medicine with benchmarking has emerged in the scientific community. In this work, we present the experimental validation of our previously proposed benchmarking scheme for upper limb capabilities in terms of repeatability, reproducibility, and clinical meaningfulness. We performed a prospective multicenter study on neurologically intact young and elderly subjects and post-stroke patients while recording kinematics and electromyography. 60 subjects (30 young healthy, 15 elderly healthy, and 15 post-stroke) completed the benchmarking protocol. The framework was repeatable among different assessors and instrumentation. Age did not significantly impact the performance indicators of the scheme for healthy subjects. In post-stroke subjects, the movements presented decreased smoothness and speed, the movement amplitude was reduced, and the muscular activation showed lower power and lower intra-limb coordination. We revised the original framework reducing it to three motor skills, and we extracted 14 significant performance indicators with a good correlation with the ARAT clinical scale. The applicability of the scheme is wide, and it may be considered a valuable tool for upper limb functional evaluation in the clinical routine.
Asunto(s)
Benchmarking , Electromiografía , Rehabilitación de Accidente Cerebrovascular , Accidente Cerebrovascular , Extremidad Superior , Humanos , Masculino , Femenino , Proyectos Piloto , Rehabilitación de Accidente Cerebrovascular/métodos , Electromiografía/métodos , Adulto , Extremidad Superior/fisiopatología , Anciano , Persona de Mediana Edad , Reproducibilidad de los Resultados , Accidente Cerebrovascular/complicaciones , Accidente Cerebrovascular/fisiopatología , Fenómenos Biomecánicos , Estudios Prospectivos , Adulto Joven , Voluntarios Sanos , Movimiento/fisiología , Destreza Motora/fisiología , AlgoritmosRESUMEN
Idiopathic Parkinson's disease (PD) is the second most common neurodegenerative disorder worldwide. It affects the nervous system, causing motor and non-motor symptomatology. However, its clinical diagnosis remains dependent on the expertise of clinicians, as perceptual clinical scales are often used. Gait stability is one of the most relevant motor signs in PD. Nonetheless, it is usually not reported or quantified, possibly due to its unclear meaning and the high variability of metrics used in the literature. This work aims to identify a reliable and objective indicator that clinicians can use to assess patients in realistic contexts. We focused on the Largest Lyapunov Exponent (LLE), being the most common metric used in previous research works to quantify gait stability. The short and long-term LLEs were calculated in a group of 34 healthy and 42 participants diagnosed with PD. The long-term LLE extracted from the chest, right arm and right foot sensors showed statistical differences between subjects with PD and healthy control (HC) subjects, showing that the HC subjects are more stable than PD patients, whereas the short-term LLE showed the opposite results. Further investigation is required to clarify the reliability of this metric to detect and rate gait stability in people affected with PD.Clinical Relevance- This study is the first step towards the identification of an objective methodology to assess gait stability in clinical settings. Achieving this goal will contribute to improve the understanding and support the diagnosis of gait disorders that cause gait stability problems.
Asunto(s)
Enfermedad de Parkinson , Humanos , Enfermedad de Parkinson/diagnóstico , Reproducibilidad de los Resultados , Marcha/fisiología , Pie , BrazoRESUMEN
This paper proposes a new methodology for the automatic detection of magnetic disturbances from magnetic inertial measurement unit (MIMU) sensors based on deep learning. The proposed approach considers magnetometer data as input to a long short-term memory (LSTM) neural network and obtains a labeled time series output with the posterior probabilities of magnetic disturbance. We trained our algorithm on a data set that reproduces a wide range of magnetic perturbations and MIMU motions in a repeatable and reproducible way. The model was trained and tested using 15 folds, which considered independence in sensor, disturbance direction, and signal type. On average, the network can adequately detect the disturbances in 98% of the cases, which represents a significant improvement over current threshold-based detection algorithms.
RESUMEN
Effective communication is especially important in the wearable robots (WRs) community, which encloses a great variety of devices across different application domains, e.g., healthcare, occupational, and consumer. In this paper we present a vocabulary of terms with the aim to create a common understanding of terms and concepts among the different fields of expertise relevant in the WRs community. Our goal is to develop shared documentation that could serve as a reference to facilitate the use of accepted definitions in the field. The presented vocabulary is the result of different focus group discussions among experts in the field. The resulting document was then validated by presenting it to the WR community through an online survey. The results of the survey highlight a strong agreement in terms of acceptance of the vocabulary, its usefulness, and applicability of the proposed definitions as well as an overall appreciation for its purpose and target. This work represents a pilot study providing unique material for the WR community, encouraging the use of shared agreed definitions. The reported version of the vocabulary has been made available as a live document in a github repository, for public commenting and further improvements.
Asunto(s)
Dispositivos Electrónicos Vestibles , Humanos , Proyectos Piloto , Grupos Focales , Encuestas y CuestionariosRESUMEN
Powered lower limb exoskeletons have been used in recent decades to support and improve conventional gait rehabilitation programs. In this context, visual feedback is considered a valuable tool to facilitate patient learning and engagement. Treadmill-based lower limb robotic exoskeletons are commonly incorporated with traditional screens or virtual reality (VR) devices. However, these modalities are incompatible with over-ground robotic exoskeletons, in which users should pay attention to multiple elements of the open environment and more complex tasks. Recent advances in augmented reality (AR) technology have unlocked a new way of displaying 3D graphics in untethered wearable devices like Microsoft's Hololens 2 without occluding the rest of the user's field of view. These advances can be crucial in certain situations and position AR as an excellent candidate to improve visual feedback when using robotic exoskeletons. In this work, we present the development of an AR-based audio-visual feedback system that tracks the trunk rotation from an Inertial Measurement Unit (IMU) to aid in walking tasks assisted by a lower limb robotic exoskeleton. A preliminary study was done integrating the H3 robotic exoskeleton with Hololens 2. We observed that displaying posture information is feasible and could help mitigate the unnatural posture often imposed by a robotic exoskeleton.
Asunto(s)
Realidad Aumentada , Dispositivo Exoesqueleto , Humanos , Estudios de Factibilidad , Retroalimentación , Caminata , MarchaRESUMEN
The objective and quantitative assessment of physical human-exoskeletons interaction (pHEI) represents a pressing necessity in the wearable robots field. This process remains of difficult execution, especially for early stage devices, in which the inclusion of human testing could pose ethical and safety concerns. This manuscript proposes a methodology for pHEI assessment based on an active dummy leg named Leg Replica, which is able to sense interaction forces while wearing an exoskeleton. We tested this methodology on a wearable active knee exoskeleton prototype, with the goal to evaluate the effects of a misalignment compensation mechanism. Through this methodology, it was possible to show how the misalignment compensation mechanism was able to reduce the interaction forces during passive exoskeleton motion. Such reduction was less evident when the exoskeleton was active. The tests allowed to identify specific points of improvements for the exoskeleton, enabling a more specific upgrade of the device based on these experimental results. This study demonstrates the ability of the proposed methodology to objectively benchmark different aspects of pHEI, and to accelerate the iterative development of new devices prior to human testing.
Asunto(s)
Dispositivo Exoesqueleto , Procedimientos Quirúrgicos Robotizados , Robótica , Humanos , Pierna , RodillaRESUMEN
Several studies suggest that the central nervous system coordinates muscle activation by modulating neural commands directed to groups of muscles combined to form muscle synergies. Individuals with patellofemoral pain (PFP) move differently from asymptomatic individuals. Understanding the neural strategies involved in the execution of tasks such as walking can help comprehend how the movement is planned and better understand this clinical condition. The objective of this study was to compare muscle synergies between women with and without PFP during walking. Eleven women with PFP and thirteen asymptomatic women were assessed using three-dimensional kinematics and electromyography (EMG) while walking at self-selected speed. Kinematics of the trunk, pelvis and lower limbs were analyzed through the Movement Deviation Profile. Muscle synergies were extracted from the EMG signals of eight lower limb muscles collected throughout the whole gait cycle. Kinematic differences between the two groups (p<0.001, z-score = 3.06) were more evident during loading response, terminal stance, and pre-swing. PFP group presented a lower number of muscle synergies (p = 0.037), and greater variability accounted for (VAFtotal) when using 3 (p = 0.017), 4 (p = 0.004), and 5 (p = 0.012) synergies to reconstruct all EMG signals. The PFP group also presented higher VAFmuscle for rectus femoris (p = 0.048) and gastrocnemius medialis (p = 0.019) when considering 4 synergies. Our results suggest that women with PFP show lower motor complexity and deficit in muscle coordination to execute gait, indicating that gait in PFP is the result of different neural commands compared to asymptomatic women.
Asunto(s)
Síndrome de Dolor Patelofemoral , Humanos , Femenino , Caminata/fisiología , Marcha/fisiología , Extremidad Inferior/fisiología , Músculo Esquelético/fisiología , Electromiografía , Fenómenos BiomecánicosRESUMEN
One important point in the development of a brain-machine Interface (BMI) commanding an exoskeleton is the assessment of the cognitive engagement of the subject during the motor imagery tasks conducted. However, there are not many databases that provide electroencephalography (EEG) data during the use of a lower-limb exoskeleton. The current paper presents a database designed with an experimental protocol aiming to assess not only motor imagery during the control of the device, but also the attention to gait on flat and inclined surfaces. The research was conducted as an EUROBENCH subproject in the facilities sited in Hospital Los Madroños, Brunete (Madrid). The data validation reaches accuracies over 70% in the assessment of motor imagery and attention to gait, which marks the present database as a valuable resource for researches interested on developing and testing new EEG-based BMIs.
Asunto(s)
Electroencefalografía , Dispositivo Exoesqueleto , Cognición , Electroencefalografía/métodos , Extremidad Inferior , Caminata , HumanosRESUMEN
Exoskeletons are becoming the reference technology for assistance and augmentation of human motor functions in a wide range of application domains. Unfortunately, the exponential growth of this sector has not been accompanied by a rigorous risk assessment (RA) process, which is necessary to identify the major aspects concerning the safety and impact of this new technology on humans. This situation may seriously hamper the market uptake of new products. This paper presents the results of a survey that was circulated to understand how hazards are considered by exoskeleton users, from research and industry perspectives. Our analysis aimed to identify the perceived occurrence and the impact of a sample of generic hazards, as well as to collect suggestions and general opinions from the respondents that can serve as a reference for more targeted RA. Our results identified a list of relevant hazards for exoskeletons. Among them, misalignments and unintended device motion were perceived as key aspects for exoskeletons' safety. This survey aims to represent a first attempt in recording overall feedback from the community and contribute to future RAs and the identification of better mitigation strategies in the field.
Asunto(s)
Dispositivo Exoesqueleto , Traumatismos de la Médula Espinal , Humanos , Encuestas y CuestionariosRESUMEN
Evaluating human-exoskeleton interaction typically requires experiments with human subjects, which raises safety issues and entails time-consuming testing procedures. This paper presents a mechatronic replica of a human leg, which was designed to quantify physical interaction dynamics between exoskeletons and human limbs without the need for human testing. In the first part of this work, we present the mechanical, electronic, sensory system and software solutions integrated in our leg replica prototype. In the second part, we used the leg replica to test its interaction with two types of commercially available wearable devices, i.e. an active full leg exoskeleton and a passive knee orthosis. We ran basic test examples to demonstrate the functioning and benchmarking potential of the leg replica to assess the effects of joint misalignments on force transmission. The integrated force sensors embedded in the leg replica detected higher interaction forces in the misaligned scenario in comparison to the aligned one, in both active and passive modalities. The small standard deviation of force measurements across cycles demonstrates the potential of the leg replica as a standard test method for reproducible studies of human-exoskeleton physical interaction.
Asunto(s)
Dispositivo Exoesqueleto , Humanos , Pierna , Benchmarking , Programas Informáticos , Fenómenos BiomecánicosRESUMEN
The idea of this Special Issue arose from the technological advances in bionic, robotic, and neural rehabilitation systems and the common need to comprehend in detail how human anatomical structures can be replicated or controlled. Motor control theories, among others, include the generalized control program theory, the equilibrium point hypothesis, or the optimal control approach in which neural commands to the muscles are a result of the central nervous system solving an optimization problem for a specific cost function. No matter the alternative interpretation selected to replicate biological control of human movements, artificial "anatomies" should consider not only motor capabilities from the central nervous system but integrate bioinspired mechanical features (such as compliance) in artificial limbs. The development of wearable robotics and neuroprosthetic systems for human movement compensation and control is naturally inspired by human anatomy and biology. Cutting-edge technological advances in the field of biomedical and neural engineering are bringing us more and more close to a new artificial anatomy with which humans could augment their motor capabilities or replace them after they are compromised. Either augmentative/assistive or rehabilitation technologies in the near future will require engineering solutions based on novel approaches to create usable neurorobotic and neuroprosthetic systems for the most relevant societal needs.
Asunto(s)
Prótesis Neurales , Robótica , Humanos , Movimiento , Sistema Nervioso CentralRESUMEN
Cumulative back muscle fatigue plays a role in the occurrence of low-back injuries in occupations that require repetitive lifting of heavy loads and working in forward leaning postures. Lift-support exoskeletons have the potential to reduce back and hip muscle activity, thereby delaying the onset of fatigue in these muscles. Therefore, exoskeletons are being considered a potentially important tool to further reduce workload-related injuries. However, today no standards have been established on how to benchmark the support level of lift-support exoskeletons. This work proposes an experimental protocol to quantify the support level of a lift-support exoskeletons on instant changes in muscle activity and fatigue development while maintaining a static forward leaning posture. It then applies the protocol to experimentally assess the effect of the support provided by a commercially available lift-support exoskeleton, the LiftSuit 2.0 (Auxivo AG, Schwerzenbach, Switzerland), on the user. In a sample of 14 participants, the amplitude of the muscle activity of the back muscles and hip muscles () was significantly reduced. Wearing the exoskeleton significantly reduced the amount of fatigue developed during the task (). Changes in muscle fatigue can be objectively recorded and correlated with relevant changes for exoskeleton users: the time a task can be performed and perceived low-back fatigue. Thus, including such measures of fatigue in standardized benchmarking procedures will help quantify the benefits of exoskeletons for occupational use.
RESUMEN
BACKGROUND: In neurorehabilitation, we are witnessing a growing awareness of the importance of standardized quantitative assessment of limb functions. Detailed assessments of the sensorimotor deficits following neurological disorders are crucial. So far, this assessment has relied mainly on clinical scales, which showed several drawbacks. Different technologies could provide more objective and repeatable measurements. However, the current literature lacks practical guidelines for this purpose. Nowadays, the integration of available metrics, protocols, and algorithms into one harmonized benchmarking ecosystem for clinical and research practice is necessary. METHODS: This work presents a benchmarking framework for upper limb capacity. The scheme resulted from a multidisciplinary and iterative discussion among several partners with previous experience in benchmarking methodology, robotics, and clinical neurorehabilitation. We merged previous knowledge in benchmarking methodologies for human locomotion and direct clinical and engineering experience in upper limb rehabilitation. The scheme was designed to enable an instrumented evaluation of arm capacity and to assess the effectiveness of rehabilitative interventions with high reproducibility and resolution. It includes four elements: (1) a taxonomy for motor skills and abilities, (2) a list of performance indicators, (3) a list of required sensor modalities, and (4) a set of reproducible experimental protocols. RESULTS: We proposed six motor primitives as building blocks of most upper-limb daily-life activities and combined them into a set of functional motor skills. We identified the main aspects to be considered during clinical evaluation, and grouped them into ten motor abilities categories. For each ability, we proposed a set of performance indicators to quantify the proposed ability on a quantitative and high-resolution scale. Finally, we defined the procedures to be followed to perform the benchmarking assessment in a reproducible and reliable way, including the definition of the kinematic models and the target muscles. CONCLUSIONS: This work represents the first unified scheme for the benchmarking of upper limb capacity. To reach a consensus, this scheme should be validated with real experiments across clinical conditions and motor skills. This validation phase is expected to create a shared database of human performance, necessary to have realistic comparisons of treatments and drive the development of new personalized technologies.
Asunto(s)
Enfermedades del Sistema Nervioso , Rehabilitación de Accidente Cerebrovascular , Accidente Cerebrovascular , Benchmarking , Ecosistema , Humanos , Reproducibilidad de los Resultados , Rehabilitación de Accidente Cerebrovascular/métodos , Extremidad SuperiorRESUMEN
Previous implementations of closed-loop peripheral electrical stimulation (PES) strategies have provided evidence about the effect of the stimulation timing on tremor reduction. However, these strategies have used traditional signal processing techniques that only consider phase prediction and might not model the non-stationary behavior of tremor. Here, we tested the use of long short-term memory (LSTM) neural networks to predict tremor signals using kinematic data recorded from Essential Tremor (ET) patients. A dataset comprising wrist flexion-extension data from 12 ET patients was pre-processed to feed the predictors. A total of 180 models resulting from the combination of network (neurons and layers of the LSTM networks, length of the input sequence and prediction horizon) and training parameters (learning rate) were trained, validated and tested. Predicted tremor signals using LSTM-based models presented high correlation values (from 0.709 to 0.998) with the expected values, with a phase delay between the predicted and real signals below 15 ms, which corresponds approximately to 7.5% of a tremor cycle. The prediction horizon was the parameter with a higher impact on the prediction performance. The proposed LSTM-based models were capable of predicting both phase and amplitude of tremor signals outperforming results from previous studies (32--56% decreased phase prediction error compared to the out-of-phase method), which might provide a more robust PES-based closed-loop control applied to PES-based tremor reduction.
Asunto(s)
Memoria a Corto Plazo , Temblor , Humanos , Temblor/diagnóstico , Redes Neurales de la Computación , MuñecaRESUMEN
This study describes the software methodology designed for systematic benchmarking of bipedal systems through the computation of performance indicators from data collected during an experimentation stage. Under the umbrella of the European project Eurobench, we collected approximately 30 protocols with related testbeds and scoring algorithms, aiming at characterizing the performances of humanoids, exoskeletons, and/or prosthesis under different conditions. The main challenge addressed in this study concerns the standardization of the scoring process to permit a systematic benchmark of the experiments. The complexity of this process is mainly due to the lack of consistency in how to store and organize experimental data, how to define the input and output of benchmarking algorithms, and how to implement these algorithms. We propose a simple but efficient methodology for preparing scoring algorithms, to ensure reproducibility and replicability of results. This methodology mainly constrains the interface of the software and enables the engineer to develop his/her metric in his/her favorite language. Continuous integration and deployment tools are then used to verify the replicability of the software and to generate an executable instance independent of the language through dockerization. This article presents this methodology and points at all the metrics and documentation repositories designed with this policy in Eurobench. Applying this approach to other protocols and metrics would ease the reproduction, replication, and comparison of experiments.
RESUMEN
Legged robotic technologies have moved out of the lab to operate in real environments, characterized by a wide variety of unpredictable irregularities and disturbances, all this in close proximity with humans. Demonstrating the ability of current robots to move robustly and reliably in these conditions is becoming essential to prove their safe operation. Here, we report an in-depth literature review aimed at verifying the existence of common or agreed protocols and metrics to test the performance of legged system in realistic environments. We primarily focused on three types of robotic technologies, i.e., hexapods, quadrupeds and bipeds. We also included a comprehensive overview on human locomotion studies, being it often considered the gold standard for performance, and one of the most important sources of bioinspiration for legged machines. We discovered that very few papers have rigorously studied robotic locomotion under irregular terrain conditions. On the contrary, numerous studies have addressed this problem on human gait, being nonetheless of highly heterogeneous nature in terms of experimental design. This lack of agreed methodology makes it challenging for the community to properly assess, compare and predict the performance of existing legged systems in real environments. On the one hand, this work provides a library of methods, metrics and experimental protocols, with a critical analysis on the limitations of the current approaches and future promising directions. On the other hand, it demonstrates the existence of an important lack of benchmarks in the literature, and the possibility of bridging different disciplines, e.g., the human and robotic, towards the definition of standardized procedures that will boost not only the scientific development of better bioinspired solutions, but also their market uptake.
Asunto(s)
Robótica , Marcha , Humanos , Locomoción , Robótica/métodosRESUMEN
Exoskeletons and exosuits have witnessed unprecedented growth in recent years, especially in the medical and industrial sectors. In order to be successfully integrated into the current society, these devices must comply with several commercialization rules and safety standards. Due to their intrinsic coupling with human limbs, one of the main challenges is to test and prove the quality of physical interaction with humans. However, the study of physical human-exoskeleton interactions (pHEI) has been poorly addressed in the literature. Understanding and identifying the technological ways to assess pHEI is necessary for the future acceptance and large-scale use of these devices. The harmonization of these evaluation processes represents a key factor in building a still missing accepted framework to inform human-device contact safety. In this review, we identify, analyze, and discuss the metrics, testing procedures, and measurement devices used to assess pHEI in the last ten years. Furthermore, we discuss the role of pHEI in safety contact evaluation. We found a very heterogeneous panorama in terms of sensors and testing methods, which are still far from considering realistic conditions and use-cases. We identified the main gaps and drawbacks of current approaches, pointing towards a number of promising research directions. This review aspires to help the wearable robotics community find agreements on interaction quality and safety assessment testing procedures.
Asunto(s)
Dispositivo Exoesqueleto , Robótica , Diseño de Equipo , Humanos , Robótica/métodosRESUMEN
Arm cycling is a bimanual motor task used in medical rehabilitation and in sports training. Understanding how muscle coordination changes across different biomechanical constraints in arm cycling is a step toward improved rehabilitation approaches. This exploratory study aims to get new insights on motor control during arm cycling. To achieve our main goal, we used the muscle synergies analysis to test three hypotheses: 1) body position with respect to gravity (sitting and supine) has an effect on muscle synergies; 2) the movement size (crank length) has an effect on the synergistic behavior; 3) the bimanual cranking mode (asynchronous and synchronous) requires different synergistic control. Thirteen able-bodied volunteers performed arm cranking on a custom-made device with unconnected cranks, which allowed testing three different conditions: body position (sitting vs. supine), crank length (10 cm vs. 15 cm), and cranking mode (synchronous vs. asynchronous). For each of the eight possible combinations, subjects cycled for 30 s while electromyography of eight muscles (four from each arm) were recorded: biceps brachii, triceps brachii, anterior deltoid, and posterior deltoid. Muscle synergies in this eight-dimensional muscle space were extracted by nonnegative matrix factorization. Four synergies accounted for over 90% of muscle activation variances in all conditions. Results showed that synergies were affected by body position and cranking mode but practically unaffected by movement size. These results suggest that the central nervous system may employ different motor control strategies in response to external constraints such as cranking mode and body position during arm cycling.NEW & NOTEWORTHY Recent studies analyzed muscle synergies in lower limb cycling. Here, we examine upper limb cycling and specifically the effect of body position with respect to gravity, movement size, and cranking mode on muscle coordination during arm cranking tasks. We show that altered body position and cranking mode affects modular organization of muscle activities. To our knowledge, this is the first study assessing motor control through muscle synergies framework during upper limb cycling with different constraints.
Asunto(s)
Brazo/fisiología , Fenómenos Biomecánicos/fisiología , Actividad Motora/fisiología , Músculo Esquelético/fisiología , Desempeño Psicomotor/fisiología , Adulto , Electromiografía , Femenino , Gravitación , Humanos , Masculino , Adulto JovenRESUMEN
The science and technology of wearable robots are steadily advancing, and the use of such robots in our everyday life appears to be within reach. Nevertheless, widespread adoption of wearable robots should not be taken for granted, especially since many recent attempts to bring them to real-life applications resulted in mixed outcomes. The aim of this article is to address the current challenges that are limiting the application and wider adoption of wearable robots that are typically worn over the human body. We categorized the challenges into mechanical layout, actuation, sensing, body interface, control, human-robot interfacing and coadaptation, and benchmarking. For each category, we discuss specific challenges and the rationale for why solving them is important, followed by an overview of relevant recent works. We conclude with an opinion that summarizes possible solutions that could contribute to the wider adoption of wearable robots.