RESUMEN
A biosensor is a promising alternative tool for the detection of clinically relevant analytes. Optical fiber as a transducer element in biosensors offers low cost, biocompatibility, and lack of electromagnetic interference. Moreover, due to the miniature size of optical fibers, they have the potential to be used in microfluidic chips and in vivo applications. The number of optical fiber biosensors are extensively growing: they have been developed to detect different analytes ranging from small molecules to whole cells. Yet the widespread applications of optical fiber biosensor have been hindered; one of the reasons is the lack of suitable packaging for their real-life application. In order to translate optical fiber biosensors into clinical practice, a proper embedding of biosensors into medical devices or portable chips is often required. A proper packaging approach is frequently as challenging as the sensor architecture itself. Therefore, this review aims to give an unpack different aspects of the integration of optical fiber biosensors into packaging platforms to bring them closer to actual clinical use. Particularly, the paper discusses how optical fiber sensors are integrated into flow cells, organized into microfluidic chips, inserted into catheters, or otherwise encased in medical devices to meet requirements of the prospective applications.
RESUMEN
A dielectric waveguide, inserted into blood vessels, supports its basic mode that is being scattered by a near-field intravascular inclusion. A rigorous integral equation formulation is performed and the electromagnetic response from that inhomogeneity is semi-analytically evaluated. The detectability of the formation, based on spatial distribution of the recorded signal, is estimated by considering various inclusion sizes, locations and textural contrasts. The proposed technique, with its variants and generalizations, provides a generic versatile toolbox to efficiently model biosensor layouts involved in healthcare monitoring and disease screening.
Asunto(s)
Técnicas Biosensibles , Técnicas Biosensibles/métodos , Humanos , Vasos Sanguíneos/diagnóstico por imagen , Modelos TeóricosRESUMEN
The feature issue of Biomedical Optics Express titled "Advances in Optical Biosensors for Biomedical Applications" presents a comprehensive collection of cutting-edge optical biosensor research. With the growing demand for sensitive, label-free, and real-time detection of biological analytes, optical biosensors have emerged as important devices in a wide range of biomedical applications, including medical diagnostics, bioanalysis, and personalised healthcare. This collection of 26 papers highlights recent advances and innovations in the development, design, and implementation of optical biosensors. The feature issue serves as an opportunity for disseminating ground-breaking findings, promoting new ideas, and inspiring further developments in optical biosensors for medical applications. The authors provide breakthrough technology, innovative approaches, and practical clinical applications that have the potential to revolutionize healthcare and biomedical research.
RESUMEN
Biosensors are established as promising analytical tools for detecting various analytes important in biomedicine and environmental monitoring. Using fiber optic technology as a sensing element in biosensors offers low cost, high sensitivity, chemical inertness, and immunity to electromagnetic interference. Optical fiber sensors can be used in in vivo applications and multiplexed to detect several targets simultaneously. Certain configurations of optical fiber technology allow the detection of analytes in a label-free manner. This review aims to discuss recent advances in label-free optical fiber biosensors from a technological and application standpoint. First, modern technologies used to build label-free optical fiber-based sensors will be discussed. Then, current applications where these technologies are applied are elucidated. Namely, examples of detecting soluble cancer biomarkers, hormones, viruses, bacteria, and cells are presented.
RESUMEN
The accuracy and efficacy of medical treatment would be greatly improved by the continuous and real-time monitoring of protein biomarkers. Identification of cancer biomarkers in patients with solid malignant tumors is receiving increasing attention. Existing techniques for detecting cancer proteins, such as the enzyme-linked immunosorbent assay, require a lot of work, are not multiplexed, and only allow for single-time point observations. In order to get one step closer to clinical usage, a dynamic platform for biosensing the cancer biomarker CD44 using a single-mode optical fiber-based ball resonator biosensor was designed, constructed and evaluated in this work. The main novelty of the work is an in-depth study of the capability of an in-house fabricated optical fiber biosensor for in situ detection of a cancer biomarker (CD44 protein) by conducting several types of experiments. The main results of the work are as follows: (1) Calibration of the fabricated fiber-optic ball resonator sensors in both static and dynamic conditions showed similar sensitivity to the refractive index change demonstrating its usefulness as a biosensing platform for dynamic measurements; (2) The fabricated sensors were shown to be insensitive to pressure changes further confirming their utility as an in situ sensor; (3) The sensor's packaging and placement were optimized to create a better environment for the fabricated ball resonator's performance in blood-mimicking environment; (4) Incubating increasing protein concentrations with antibody-functionalized sensor resulted in nearly instantaneous signal change indicating a femtomolar detection limit in a dynamic range from 7.1 aM to 16.7 nM; (5) The consistency of the obtained signal change was confirmed by repeatability studies; (6) Specificity experiments conducted under dynamic conditions demonstrated that the biosensors are highly selective to the targeted protein; (7) Surface morphology studies by AFM measurements further confirm the biosensor's exceptional sensitivity by revealing a considerable shift in height but no change in surface roughness after detection. The biosensor's ability to analyze clinically relevant proteins in real time with high sensitivity offers an advancement in the detection and monitoring of malignant tumors, hence improving patient diagnosis and health status surveillance.
Asunto(s)
Técnicas Biosensibles , Neoplasias , Humanos , Biomarcadores de Tumor , Técnicas Biosensibles/métodos , Tecnología de Fibra Óptica/métodos , Fibras Ópticas , Proteínas , Neoplasias/diagnóstico , Receptores de HialuranosRESUMEN
Bite force measurements are crucial in the realm of biomedical research, particularly in the areas of dentistry and orthodontic care. Various intraoral devices have been used to assess biting force, but each has limitations and drawbacks. Fiber optic sensors (FOSs) offer advantages such as electrical inertness, immunity to electromagnetic interference, and high sensitivity. Distributed fiber optic sensing allows an increase in the number of sensing points and can interrogate numerous reflections from scattering events within an optical fiber. We present four dental bites with heights of 6 mm, which enabled bilateral measurements. U-shaped sensors were prepared by embedding fibers into silicone by folding a single-mode fiber into four lines and multiplexing eight parallel nanoparticle-doped fibers. Dental bite models were created using two silicone materials (Sorta Clear 18 and Sorta Clear 40). The developed sensors were calibrated by applying weights up to 900 g, resulting in a linear response. Experiments were conducted to compare the efficacy of the dental bites. The collection of massive data was enabled by constructing a 2D map of the dental bites during multi-point sensing.
RESUMEN
Detection of biomarkers for tracking disease progression is becoming increasingly important in biomedicine. Using saliva as a diagnostic sample appears to be a safe, cost-effective, and non-invasive approach. Salivary interleukin-8 levels demonstrate specific changes associated with diseases such as obstructive pulmonary disease, squamous cell carcinoma, oral cancer, and breast cancer. Traditional protein detection methods, such as enzyme-linked immunosorbent assay (ELISA), mass spectrometry, and Western blot are often expensive, complex, and time-consuming. In this study, an optical fiber-based biosensor was developed to detect salivary IL-8 protein in a label-free manner. The biosensor was able to achieve an ultra-low limit detection of 0.91 fM. Moreover, the tested concentration range was wide: from 273 aM to 59 fM. As a proof-of-concept for detecting the protein in real clinical samples, the detection was carried out in artificial saliva. It was possible to achieve high sensitivity for the target protein and minimal signal alterations for the control proteins.
RESUMEN
BACKGROUND: Lesions of the distal phalanges of the fingers frequently involve the nail bed. There are few therapeutic options for nail-bed reconstruction and they often lead to painful scars and onychodystrophy. We present our experience with the distal adipofascial laterodigital reverse flap. METHODS: Fifteen patients (average age 46.33 years, range 28-73) with tumors or traumatic injuries (crush injuries, nail avulsion, and partial fingertip amputations) of the nail bed, underwent digital reconstruction through the distal adipofascial laterodigital reverse flap from June 2018 to August 2019. The size of the fingertip defect covered with the flap was ranged between 1.1 × 1.1 and 1.6 × 1.2 cm (average size 1.4 × 1.2 cm). The flap was harvested enrolling subcutaneous tissue from the lateral aspect of the middle and distal phalanx from the less damaged side. RESULTS: The average size of the harvested flaps was 1.3 × 1.2 cm (range 1.1 × 1.0 to 1.4 × 1.1 cm). All adipofascial flaps survived entirely and the nail bed healed in all patients, with an average healing time of 21 days and a subsequent regrowth of the nail. The follow up ranged from 6 to 12 months, with a mean of 7 months. CONCLUSIONS: The distal reverse adipofascial flap provides a very versatile and reliable coverage of the distal finger and its nail bed. It is a rapid and reproducible surgical procedure with poor morbidity for the donor site. LEVEL OF EVIDENCE: IV.
Asunto(s)
Traumatismos de los Dedos , Procedimientos de Cirugía Plástica , Humanos , Adulto , Persona de Mediana Edad , Anciano , Traumatismos de los Dedos/cirugía , Colgajos Quirúrgicos/cirugía , Trasplante de Piel/métodos , Dedos/cirugíaRESUMEN
In this work, we present the development and biofunctionalization of a fiber-optic ball-resonator biosensor for the real-time detection of vaccinia poxvirus. We fabricated several ball-tip resonators, functionalized through a silanization process to immobilize two bioreceptors: the monoclonal anti-L1R antibody targeting the L1R protein, and the polyclonal rabbit serum antibodies targeting the whole vaccinia virus (VV) pathogen. Experimental measurements were carried out to detect VV in concentrations from 103 to 108 plaque-forming units (PFU), with a limit of detection of around 1.7-4.3 × 103 PFU and a log-quadratic pattern, with a response up to 5 × 10-4 RIU (refractive index units). The specificity was assessed against herpes simplex virus, used as a non-specific control, with the best results obtained with anti-L1R monoclonal antibodies, and through the detection of vaccinia virus/herpes simplex-1 combination. The obtained results provide a real-time viral recognition with a label-free sensing platform, having rapid response and ease of manufacturing, and paving the road to the seamless detection of poxviruses affecting different human and animal species using optical fibers.
Asunto(s)
Técnicas Biosensibles , Poxviridae , Vaccinia , Animales , Humanos , Conejos , Virus Vaccinia , Tecnología de Fibra ÓpticaRESUMEN
Reconstruction of osseous defects of the distal phalanx of the thumb is usually addressed with free bone grafts or free vascularized bone flaps. Some reports demonstrated the possibility to harvest an osteo-cutaneous flap in the dorso-ulnar side of the first metacarpal bone with success. In the same manner, no reports are present in the literature in which bone deficits were reconstructed with this flap elevated as an exclusively osseous flap. We report our successful experience with one case of distal phalanx reconstruction of the thumb by mean of the dorso-ulnar reverse flow pedicled osseous flap. The patient was a 45-year-old woman with symptoms related to a cystic bone tumor that involved the entirety of the distal phalanx of the thumb. Flap dimensions were calculated based on x-ray gap measures, which resulted in need of 1.5 × 0.8 × 0.5 cm flap dimensions. An osseous flap was harvested and transposed from the ulnar side of the first metacarpal bone. K-wire fixation was utilized for bone flap stabilization. No complications occurred and excellent functional result was evaluated at 6 months follow-up. In our opinion, the flap may be considered as an alternative to free bone grafts in situations in which perilesional tissues may jeopardize the process of free graft taking and in cases in which free vascularized bone flaps are not feasible for patient or surgeon decision.
Asunto(s)
Falanges de los Dedos de la Mano , Procedimientos de Cirugía Plástica , Femenino , Humanos , Persona de Mediana Edad , Pulgar/cirugía , Colgajos Quirúrgicos/cirugía , Falanges de los Dedos de la Mano/cirugía , Trasplante ÓseoRESUMEN
Radiofrequency ablation (RFA) is a minimally invasive form of thermotherapy with great potential in cancer care, having the capability of selectively ablating tumoral masses with a surface area of several cm2. When performing RFA in the proximity of a blood vessel, the heating profile changes due to heat dissipation, perfusion, and impedance changes. In this work, we provide an experimental framework for the real-time evaluation of 2D thermal maps in RFA neighboring a blood vessel; the experimental setup is based on simultaneous scanning of multiple fibers in a distributed sensing network, achieving a spatial resolution of 2.5 × 4 mm2 in situ. We also demonstrate an increase of ablating potential when injecting an agarose gel in the tissue. Experimental results show that the heat-sink effect contributes to a reduction of the ablated region around 30-60% on average; however, the use of agarose significantly mitigates this effect, enlarging the ablated area by a significant amount, and ablating an even larger surface (+15%) in the absence of blood vessels.
Asunto(s)
Ablación por Catéter , Neoplasias , Ablación por Radiofrecuencia , Humanos , Ablación por Catéter/métodos , Fibras Ópticas , Sefarosa , HígadoRESUMEN
Fiber-optic sensors are a powerful tool to investigate physical properties like temperature, strain, and pressure. Such properties make these sensors interesting for many applications including biomedical applications. Fiber sensors are also a great platform for distributed sensing by using the principles of optical frequency domain reflectometry. Distributed sensing is becoming more and more used to achieve high-resolution measurements and to map physical properties of biomaterials at small scale, thus obtaining 2D and 3D mapping of a particular area of interest. This work aims at building and investigating a 2D sensing carpet based on a distributed fiber sensing technique, to map local pressure applied to the carpet. The two-dimensional mapping is obtained by embedding a single-mode optical fiber inside a soft silicone carpet. The fiber has been bent and arranged in a specific configuration characterized by several parallel lines. Different fiber fixation methods have been investigated by means of a comparative analysis to perform better characterization and to achieve a more precise response of the carpet. The best pressure sensitivity coefficient (0.373 pm/kPa or considering our setup 1.165 nm/kg) was detected when the fiber was fully embedded inside the silicone carpet. This paper demonstrates the possibility of mapping a 2D distributed pressure over a surface with a resolution of 2 mm by 2 mm. The surface of investigation is 2 cm by 6 cm, containing 310 sensing points. The sensing carpet has been validated selecting several preferential positions, by testing the consistency of the results over different portions of the carpet.
Asunto(s)
Pisos y Cubiertas de Piso , Siliconas , Fibras Ópticas , Tecnología de Fibra Óptica , TemperaturaRESUMEN
Fiber-optic ball resonators are an attractive technology for refractive index (RI) sensing and optical biosensing, as they have good sensitivity and allow for a rapid and repeatable manufacturing process. An important feature for modern biosensing devices is the multiplexing capacity, which allows for interrogating multiple sensors (potentially, with different functionalization methods) simultaneously, by a single analyzer. In this work, we report a multiplexing method for ball resonators, which is based on a spatial-division multiplexing approach. The method is validated on four ball resonator devices, experimentally evaluating both the cross-talk and the spectral shape influence of one sensor on another. We show that the multiplexing approach is highly efficient and that a sensing network with an arbitrary number of ball resonators can be designed with reasonable penalties for the sensing capabilities. Furthermore, we validate this concept in a four-sensor multiplexing configuration, for the simultaneous detection of two different cancer biomarkers across a widespread range of concentrations.
Asunto(s)
Técnicas Biosensibles , Refractometría , Refractometría/métodos , Tecnología de Fibra Óptica , Técnicas Biosensibles/métodos , Fibras ÓpticasRESUMEN
Currently, significant progress is being made in the prevention, treatment and prognosis of many types of cancer, using biological markers to assess current physiological processes in the body, including risk assessment, differential diagnosis, screening, treatment determination and monitoring of disease progression. The interaction of protein coding gene CD44 with the corresponding ligands promotes the processes of invasion and migration in metastases. The study of new and rapid methods for the quantitative determination of the CD44 protein is essential for timely diagnosis and therapy. Current methods for detecting this protein use labeled assay reagents and are time consuming. In this paper, a fiber-optic biosensor with a spherical tip coated with a thin layer of zinc oxide (ZnO) with a thickness of 100 nm, deposited using a low-cost sol-gel method, is developed to measure the CD44 protein in the range from 100 aM to 100 nM. This sensor is easy to manufacture, has a good response to the protein change with detection limit of 0.8 fM, and has high sensitivity to the changes in the refractive index (RI) of the environment. In addition, this work demonstrates the possibility of achieving sensor regeneration without damage to the functionalized surface. The sensitivity of the obtained sensor was tested in relation to the concentration of the control protein, as well as without antibodies-CD44.
Asunto(s)
Técnicas Biosensibles , Óxido de Zinc , Resonancia por Plasmón de Superficie/métodos , Tecnología de Fibra Óptica , Técnicas Biosensibles/métodos , RefractometríaRESUMEN
In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs' application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones' hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring.
Asunto(s)
Técnicas Biosensibles , Tecnología de Fibra Óptica , Análisis Costo-Beneficio , Humanos , Fibras Ópticas , Teléfono InteligenteRESUMEN
Bacterial biofilms are one of the most important challenges that modern medicine faces due to the difficulties of diagnosis, antibiotic resistance, and protective mechanisms against aggressive environments. For these reasons, methods that ensure the inexpensive and rapid or real-time detection of biofilm formation on medical devices are needed. This study examines the possibilities of using optical- and fiber-based biosensors to detect and analyze early bacterial biofilms. In this study, the biofilm-forming model organism Pseudomonas aeruginosa was inoculated on the surface of the optical sensor and allowed to attach for 2 h. The biosensors were made by a fiber-tip ball resonator, fabricated through a CO2 laser splicer on a single-mode fiber, forming a weak reflective spectrum. An optical backscatter reflectometer was used to measure the refractive index detected by the sensors during different growth periods. The early biofilm concentration was determined by crystal violet (CV) binding assay; however, such a concentration was lower than the detection limit of this assay. This work presents a new approach of biofilm sensing in the early attachment stage with a low limit of detection up to 10-4 RIU (refractive index units) or 35 ± 20 × 103 CFU/mL (colony formed units).
Asunto(s)
Técnicas Biosensibles , Fibras Ópticas , Bacterias , Biopelículas , Pseudomonas aeruginosa , RefractometríaRESUMEN
In this work, we report the design of an optical fiber distributed sensing network for the 2-dimensional (2D) in situ thermal mapping of advanced methods for radiofrequency thermal ablation. The sensing system is based on six high-scattering MgO-doped optical fibers, interleaved by a scattering-level spatial multiplexing approach that allows simultaneous detection of each fiber location, in a 40 × 20 mm grid (7.8 mm2 pixel size). Radiofrequency ablation (RFA) was performed on bovine phantom, using a pristine approach and methods mediated by agarose and gold nanoparticles in order to enhance the ablation properties. The 2D sensors allow the detection of spatiotemporal patterns, evaluating the heating properties and investigating the repeatability. We observe that agarose-based ablation yields the widest ablated area in the best-case scenario, while gold nanoparticles-mediated ablation provides the best trade-off between the ablated area (53.0-65.1 mm2, 61.5 mm2 mean value) and repeatability.
Asunto(s)
Ablación por Catéter , Nanopartículas del Metal , Ablación por Radiofrecuencia , Animales , Ablación por Catéter/métodos , Bovinos , Oro , SefarosaRESUMEN
Measuring cancer biomarkers at ultralow detection limit and high sensitivity could be a promising tool for early diagnosis, monitoring treatment and post-treatment recurrence. Soluble CD44 is a promising diagnostic and prognostic biomarker in several types of cancer including gastric, colon and breast cancer. Several highly sensitive biosensors have been built to measure this important biomarker. However, they did not reach attomolar level of detection. The aim of this work was to build a biosensor capable of detecting CD44 concentrations down to attomolar (aM) level while measuring it in a wide concentration range. Herein, we demonstrate a biosensor that offers 4 key advantages over existing platforms for CD44 detection: 1) detection of CD44 was carried out in a diluted serum down to attomolar level (4.68 aM) which is about 6 orders of magnitude lower than that of a traditional ELISA; 2) fabrication of the sensor is done in a fast way using inexpensive materials making it a disposable fiber optic biosensor; 3) detection of CD44 was performed in a wide dynamic range previously not shown in other similar biosensors; 4) a proof-of-concept experiment was performed using the biosensor to embed it in a catheter to measure the protein in flow conditions.
Asunto(s)
Técnicas Biosensibles , Neoplasias de la Mama , Biomarcadores de Tumor , Femenino , Tecnología de Fibra Óptica , Humanos , Receptores de Hialuranos , Límite de Detección , Fibras ÓpticasRESUMEN
This work presents an experimental investigation of the effect of chemical etching on the refractive index (RI) sensitivity of tilted fiber Bragg gratings (TFBGs). Hydrofluoric acid (HF) was used stepwise in order to reduce the optical fiber diameter from 125 µm to 13 µm. After each etching step, TFBGs were calibrated using two ranges of RI solutions: the first one with high RI variation (from 1.33679 RIU to 1.37078 RIU) and the second with low RI variation (from 1.34722 RIU to 1.34873 RIU). RI sensitivity was analyzed in terms of wavelength shift and intensity change of the grating resonances. The highest amplitude sensitivities obtained are 1008 dB/RIU for the high RI range and 8160 dB/RIU for the low RI range, corresponding to the unetched TFBG. The highest wavelength sensitivities are 38.8 nm/RIU for a fiber diameter of 100 µm for the high RI range, and 156 nm/RIU for a diameter of 40 µm for the small RI range. In addition, the effect of the etching process on the spectral intensity of the cladding modes, their wavelength separation and sensor linearity (R2) were studied as well. As a result, an optimization of the etching process is provided, so that the best trade-off between sensitivity, intensity level, and fiber thickness can be obtained.
Asunto(s)
Fibras Ópticas , RefractometríaRESUMEN
Thermal ablation therapy is known as an advantageous alternative to surgery allowing the treatment of multiple tumors located in hard-to-reach locations or treating patients with medical conditions that are not compatible with surgery. Appropriate heat propagation and precise control over the heat propagation is considered a weak point of thermal ablation therapy. In this work, silver nanoparticles (AgNPs) are used to improve the heat propagation properties during the thermal ablation procedure. Green-synthesized silver nanoparticles offer several attractive features, such as excellent thermal conductivity, biocompatibility, and antimicrobial activity. A distributed multiplexed fiber optic sensing system is used to monitor precisely the temperature change during nanoparticle-assisted radiofrequency ablation. An array of six MgO-based nanoparticles doped optical fibers spliced to single-mode fibers allowed us to obtain the two-dimensional thermal maps in a real time employing optical backscattering reflectometry at 2 mm resolution and 120 sensing points. The silver nanoparticles at 5, 10, and 20 mg/mL were employed to investigate their heating effects at several positions on the tissue regarding the active electrode. In addition, the pristine tissue and tissue treated with agarose solution were also tested for reference purposes. The results demonstrated that silver nanoparticles could increase the temperature during thermal therapies by propagating the heat. The highest temperature increase was obtained for 5 mg/mL silver nanoparticles introduced to the area close to the electrode with a 102% increase of the ablated area compared to the pristine tissue.