Atypical histological presentation of bone regeneration after insertion of cryoprotected allogeneic bone graft.

BACKGROUND: To evaluate bone regenerative capacity of cryoprotected corticocancellous allogeneic bone graft performed in type II and III post-extraction sockets for ridge preservation after twelve weeks in-vivo. MATERIAL AND METHODS: Twenty-seven type II or III bony-walled extraction sockets (mandible and maxilla) were selected for this study. Following atraumatic tooth-extraction a cryoprotected corticocancellous allogeneic bone graft material and a resorbable porcine-derived collagen membrane were used for ridge preservation. During re-entry surgery at approximately 12 weeks, bone core biopsies were obtained using a 3.2 mm trephine drill and samples were histologically processed and subjected to qualitative and quantitative histomorphometric analysis. Quantitative data was analyzed using a general linear mixed model with results presented as mean values with the corresponding 95% confidence interval values. RESULTS: Healing without incident and ridge preservation allowed for the placement of dental implants after 12 weeks in 25 out of the 27 treated socket sites. Analyses yielded an average of ~21.0±7% of old/native bone, ~17±5.5% of newly regenerated bone (total of ~38±12.8% for all bone), 0.23±0.14% of new bone presenting with nucleating sites within the matrix, ~52±5.12% of soft tissue, and 3.6±2.09% of damaged bone. The average regenerated bone was statistically analogous to that of old/native bone (p=0.355). Furthermore, an atypical histological pattern of bone regeneration was observed, with newly formed bone exhibiting "infiltration-like" behavior and with new bone nucleating sites observed within the demineralized bone matrix. CONCLUSIONS: Cryoprotected corticocancellous allogeneic bone-graft demonstrated osteoconductive, osteoinductive, and osteogenic properties, yielding unique healing patterns which does warrant further investigation.

Impact of implant thread design on insertion torque and osseointegration: a preclinical model.

BACKGROUND: Successful osseointegration of endosteal dental implants has been attributed to implant design, including the macro-, micro- and nano- geometric properties. Based on current literature pertaining to implant design, the resultant cellular and bone healing response is unknown when the thread thickness of the implants is increased, resulting in an increased contact area in implants designed with healing chambers. The aim of this study was to evaluate the effect of two implant designs with different thread profiles on the osseointegration parameters and implant stability at 3- and 6-weeks in vivo using a well-established preclinical dog model. MATERIAL AND METHODS: A total of 48 type V Ti alloy implants were divided in two groups according to their thread design (D1= +0.1x/mm and D2= +0.15x/mm) and placed in an interpolated fashion into the radii of six beagles. Insertion torque was measured at time of placement, radii were extracted for histological processing following 3- and 6-week healing intervals. Histologic and histomorphometric analyses were performed in terms of bone to implant contact (%BIC) and bone area fraction occupancy within implant threads (%BAFO). Statistical analyses were performed through a linear mixed model with fixed factors of time and implant thread design. RESULTS: Surface roughness analysis demonstrated no significant differences in Sa and Sq between D1 and D2 implant designs, which confirmed that both implant designs were homogenous except for their respective thread profiles. For insertion torque, statistically significant lower values were recorded for D1 in comparison to D2 (59.6 ± 11.1 and 78.9 ± 10.1 N⋅cm, respectively). Furthermore, there were no significant differences with respect to histological analysis and histomorphometric parameters, between D1 and D2 at both time points. CONCLUSIONS: Both thread profiles presented equivalent potential to successfully osseointegrate in the osteotomies, with D2 yielding higher mechanical retention upon placement without detrimental bone resorption.

Microtomographic reconstruction of mandibular defects treated with xenografts and collagen-based membranes: A pre-clinical minipig model.

BACKGROUND: The goal of this study was to evaluate hard tissue response following guided bone regeneration using commercially available bovine bone grafts and collagen membranes; bilayer collagen membrane and porcine pericardium-based membrane, by means of a non-destructive three-dimensional (3D) computerized volumetric analysis following microtomography reconstruction. MATERIAL AND METHODS: Bone regenerative properties of various bovine bone graft materials were evaluated in the Göttingen minipig model. Two standardized intraosseous defects (15mm x 8mm x 8mm) were created bilaterally of the mandible of eighteen animals (n=72 defects). Groups were nested within the same subject and randomly distributed among the sites: (i) negative control (no graft and membrane), (ii) bovine bone graft/bilayer collagen membrane (BOB) (iii) Bio-Oss® bone graft/porcine pericardium-based membrane (BOJ) and (iv) cerabone® bone graft/porcine pericardium-based membrane (CJ). Samples were harvested at 4, 8, and 12-week time points (n=6 animal/time point). Segments were scanned using computerized microtomography (µCT) and three dimensionally reconstructed utilizing volumetric reconstruction software. Statistical analyses were performed using IBM SPSS with a significance level of 5%. RESULTS: From a temporal perspective, tridimensional evaluation revealed gradual bone ingrowth with the presence of particulate bone grafts bridging the defect walls, and mandibular architecture preservation over time. Volumetric analysis demonstrated no significant difference between all groups at 4 weeks (p>0.127). At 8 and 12 weeks there was a higher percentage of new bone formation for control and CJ groups when compared to BOB and BOJ groups (p<0.039). The natural bovine bone graft group showed more potential for graft resorption over time relative to bovine bone graft, significantly different between 4 and 8 weeks (p<0.003). CONCLUSIONS: Volumetric analysis yielded a favorable mandible shape with respect to time through the beneficial balance between graft resorption/bone regenerative capacity for the natural bovine bone graft.

Assessing osseointegration of metallic implants with boronized surface treatment.

BACKGROUND: Modification of endosteal implants through surface treatments have been investigated to improve osseointegration. Boronization has demonstrated favorable mechanical properties, but limited studies have assessed translational, in vivo outcomes. This study investigated the effect of implant surface boronization on bone healing. MATERIAL AND METHODS: Two implant surface roughness profiles (acid etched, machined) in CP titanium (type II) alloy implants were boronized by solid-state diffusion until 10-15µm boron coating was achieved. The surface-treated implants were placed bilaterally into 5 adult sheep ilia for three and six weeks. Four implant groups were tested: boronized machined (BM), boronized acid-etched (BAA), control machined (CM), and control acid-etched (CAA). Osseointegration was quantified by calculating bone to implant contact (BIC) and bone area fraction occupancy (BAFO). RESULTS: Both implant types treated with boronization had BIC values not statistically different from machined control implants at t=3 weeks, and significantly less than acid-etched control (p<0.02). BAFO values were not statistically different for all 3-week groups except machined control (significantly less at p <0.02). BAFO had a significant downward trend from 3 to 6 weeks in both boronized implant types (p<0.03) while both control implant types had significant increases in BIC and BAFO from 3 to 6 weeks. CONCLUSIONS: Non-decalcified histology depicted intramembranous-like healing/remodeling in bone for controls, but an absence of this dynamic process in bone for boronized implants. These findings are inconsistent with in vitro work describing bone regenerative properties of elemental Boron and suggests that effects of boron on in vivo bone healing warrant further investigation.

Osteogenic parameters surrounding trabecular tantalum metal implants in osteotomies prepared via osseodensification drilling.

BACKGROUND: Surgical fixation of implants into bone for the correction of bone deformities or defects is a traditional approach for skeletal stabilization. Important measures of efficacy of implants include implant stability and osseointegration-the direct interaction between living bone and an implant. Osseointegration depends on successful implant placement and subsequent bone remodeling. This study utilized osseodensification drilling (OD) in a low bone density model using trabecular metal (TM) implants. MATERIAL AND METHODS: Three osteotomy sites, Regular, OD-CW (clockwise), and OD-CCW (counterclockwise), were prepared in each ilium of three female sheep. Drilling was performed at 1100rpm with saline irrigation. Trabecular metal (TM) (Zimmer, Parsippany, NJ, USA) implants measuring 3.7mm in diameter x 10mm length were placed into respective osteotomies. A three-week period post-surgery was given to allow for healing to take place after which all three sheep were euthanized and the ilia were collected. Samples were prepared, qualitatively and quantitatively analyzed using histology micrographs and image analysis software (ImageJ, NIH, Bethesda, MD). Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were quantified to evaluate the osseointegration parameters. RESULTS: All implants exhibit successful bone formation in the peri-implant environment as well as within the open spaces of the trabecular network. Osseointegration within the TM (quantified by %BIC) as a function of drilling technique was more pronounced in OD samples(p>0.05). The %BAFO however shows a significant difference (p=0.036) between the CCW and R samples. Greater bone volume and frequency of bone chips are observed in OD samples. CONCLUSION: The utilization of OD as a design for improved fixation of hardware was supported by increased levels of stability, both primary and secondary. Histological data with OD provided notably different results from those of the regular drilling method.

Effect of implant placement depth on the peri-implant bone defect configurations in ligature-induced peri-implantitis: An experimental study in dogs.

BACKGROUND: The subcrestal placement of implant platform has been considered a key factor in the preservation of crestal bone, but the influence of implant placement depth on bone remodeling combined with peri-implantitis is not fully understood. The aim of this study was to assess the effect of the crestal or subcrestal placement of implants on peri-implant bone defects of ligature-induced peri-implantitis in dogs. MATERIAL AND METHODS: Eight weeks after tooth extraction in six beagle dogs, two different types of implants (A: OsseoSpeed(TM), Astra, Molndal, Sweden; B: Integra-CP(TM), Bicon, Boston, USA) were placed at either crestal or subcrestal (-1.5 mm) positions on one side of the mandible. Ligature-induced peri-implantitis was initiated four weeks after the installation of the healing abutment connections. After 12 weeks, tissue biopsies were processed for histological analyses. RESULTS: Supra-alveolar bone loss combined with a shallow infrabony defect was observed in crestal level implants while deep and wide infrabony defects were present in subcrestal level groups. Subcrestal groups showed significantly greater ridge loss, depths and widths of infrabony defects when compared to crestal groups (P <0.001). CONCLUSIONS: Within the limitations of the animal study, it can be stated that the implants at subcrestal position displayed greater infra-osseous defect than implants at crestal position under an experimental ligature-induced peri-implantitis.

Absence of spontaneous response improvement beyond day +100 after autologous stem cell transplantation in multiple myeloma.

The response evaluation after autologous stem-cell transplantation (ASCT) is usually performed at day +100 in patients with multiple myeloma (MM). A recent report suggests that improvement in the response can be observed beyond day +100. The aim of the present study has been to evaluate the rate of improved response and outcome beyond day +100 after ASCT, with and without maintenance therapy. One hundred and forty-four patients who underwent single ASCT with chemosensitive disease and achieved less than CR at day 100 post ASCT were evaluated. Seventy-four patients (51.4%) did not receive any maintenance with only one of them showing an upgrade in the response. The remaining 70 patients (48.6%) received maintenance therapy; eleven of them (15.7%) improved their response beyond day +100. The outcome of these patients was better than those who did not upgrade their response in both progression-free survival and overall survival (P=0.019 and P=0.031, respectively). In conclusion, the improvement in response beyond day +100 after ASCT in patients not receiving any therapy is exceedingly rare. A minority of patients receiving maintenance therapy after ASCT upgrades their response and this finding is associated with better outcome.

Effect of low speed drilling on osseointegration using simplified drilling procedures.

Our aim was to find out whether simplified drilling protocols would provide biological responses comparable to those of conventional drilling protocols at the low rotational speed of 400rpm. Seventy-eight root form endosseous implants with diameters of 3.75, 4.2, and 5mm were placed into canine tibias and allowed to heal for 3 and 5 weeks. After the dogs had been killed, the samples of implanted bone were retrieved and processed for non-decalcified histological sectioning. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) analyses were made on the histological sections. Implants treated by the simplified protocol resulted in BIC and BAFO values comparable to those obtained with the conventional drilling protocol, and there were no significant differences in the technique or diameter of the drilling. The results suggest that the simplified procedure gives biological outcomes comparable to those of the conventional procedure.

The combined effects of undersized drilling and implant macrogeometry on bone healing around dental implants: an experimental study.

This study investigated the effect of undersized preparations with two different implant macrogeometries. There were four experimental groups: group 1, conical implant with an undersized osteotomy of 3.2mm; group 2, conical implant with an undersized osteotomy of 3.5mm; group 3, cylindrical implant with an undersized osteotomy of 3.2mm; group 4, cylindrical implant with an undersized osteotomy of 3.5mm. Implants were placed in one side of the sheep mandible (n=6). After 3 weeks, the same procedure was conducted on the other side; 3 weeks later, euthanasia was performed. All implants were 4mm×10mm. Insertion torque was recorded for all implants during implantation. Retrieved samples were subjected to histological sectioning and histomorphometry. Implants of groups 1 and 2 presented significantly higher insertion torque than those of groups 3 and 4 (P<0.001). No differences in bone-to-implant contact or bone area fraction occupied were observed between the groups at 3 weeks (P>0.24, and P>0.25, respectively), whereas significant differences were observed at 6 weeks between groups 1 and 2, and between groups 3 and 4 (P<0.01). Undersized drilling affected the biological establishment of bone formation around both dental implant macrogeometries.

The impact of a modified cutting flute implant design on osseointegration.

Information concerning the effects of the implant cutting flute design on initial stability and its influence on osseointegration in vivo is limited. This study evaluated the early effects of implants with a specific cutting flute design placed in the sheep mandible. Forty-eight dental implants with two different macro-geometries (24 with a specific cutting flute design - Blossom group; 24 with a self-tapping design - DT group) were inserted into the mandibular bodies of six sheep; the maximum insertion torque was recorded. Samples were retrieved and processed for histomorphometric analysis after 3 and 6 weeks. The mean insertion torque was lower for Blossom implants (P<0.001). No differences in histomorphometric results were observed between the groups. At 3 weeks, P=0.58 for bone-to-implant contact (BIC) and P=0.52 for bone area fraction occupied (BAFO); at 6 weeks, P=0.55 for BIC and P=0.45 for BAFO. While no histomorphometric differences were observed, ground sections showed different healing patterns between the implants, with better peri-implant bone organization around those with the specific cutting flute design (Blossom group). Implants with the modified cutting flute design had a significantly reduced insertion torque compared to the DT implants with a traditional cutting thread, and resulted in a different healing pattern.

Pattern of relapse and progression after autologous SCT as upfront treatment for multiple myeloma.

The achievement of CR is the crucial step for a prolonged PFS and OS after an autologous SCT in multiple myeloma (MM). Unfortunately, even with the use of new regimens and the current high CR rates, most, if not all, patients will ultimately relapse or progress. We analyzed the type of relapse or progression (asymptomatic vs symptomatic), clinical features including the presence of extramedullary involvement and time to next treatment in 211 patients who underwent melphalan-based autologous SCT over an 18-year period at our institution. After autologous SCT, serological or asymptomatic relapse/progression was observed in about one half of the patients. The treatment-free interval was significantly longer in patients relapsing from CR than in those progressing from PR (P=0.017). Patients with serological relapse/progression had a significantly longer OS than those relapsing from symptomatic disease (P=0.002). The relapse pattern was similar to the initial clinical presentation. Survival after relapse/progression was shorter in those patients with a 24-h urine M-protein excretion of at least 200 mg (P=0.048). Extramedullary involvement was frequent (24%), being the highest risk in patients with extramedullary involvement at diagnosis (P=0.001).

Evaluation of bone response to various anorganic bovine bone xenografts: an experimental calvaria defect study.

This in vivo study investigated the in vivo performance of two newly developed synthetic bone substitutes and compared them to commercially available xenografts (Bio-Oss, Geistlich Pharma AG, Switzerland; OsteoGraf, Dentsply, USA). The materials were tested in a rabbit calvaria model, and the bone forming properties were observed at 4 and 8 weeks after implantation by means of histomorphometry and micro computed tomography (micro-CT). Defects without any graft material were used as negative controls. Micro-CT showed that all materials tested presented new bone formation that filled the defects at both time points, whereas the negative control presented less bone formation, with soft tissue infiltration into the defects. Comparable bone fill percentages were observed for histomorphometric and micro-CT results. Even though no statistically significant difference was found quantitatively between all of the bone graft substitute groups, a higher mean decrease in graft material filling the defects, along with higher remodelling activity, was evident for the experimental materials compared to the commercially available xenografts at 8 weeks. The results indicate that the experimental materials possess high degradability, along with osteoconduction comparable to commercially available xenografts.

Bone apposition to laminin-1 coated implants: histologic and 3D evaluation.

Laminin-1 has been reported as one of the factors responsible for the nucleation of calcium phosphates and, in vitro, has been reported to selectively recruit osteoprogenitors. This article focused on its in vivo effects, and evaluated the effect of laminin-1 local application on osseointegration. Polished cylindrical hydroxyapatite implants were coated with laminin-1 (test) and the bone responses in the rabbit tibiae after 2 and 4 weeks were evaluated and compared to the non-coated implants (control). Before the samples were processed for histological sectioning, they were three-dimensionally analysed with micro computed tomography (µCT). Both evaluation methods were analysed with regards to bone area around the implant and bone to implant contact. From the histologic observation, new bone formation around the laminin-1 coated implant at 2 weeks seemed to have increased the amount of supporting bone around the implant, however, at 4 weeks, the two groups presented no notable differences. The two-dimensional and three-dimensional morphometric evaluation revealed that both histologic and three-dimensional analysis showed some tendency in favour of the test group implants, however there was no statistical significance between the test and control group results.

Nano hydroxyapatite-coated implants improve bone nanomechanical properties.

Nanostructure modification of dental implants has long been sought as a means to improve osseointegration through enhanced biomimicry of host structures. Several methods have been proposed and demonstrated for creating nanotopographic features; here we describe a nanoscale hydroxyapatite (HA)-coated implant surface and hypothesize that it will hasten osseointegration and improve its quality relative to that of non-coated implants. Twenty threaded titanium alloy implants, half prepared with a stable HA nanoparticle surface and half grit-blasted, acid-etched, and heat-treated (HT), were inserted into rabbit femurs. Pre-operatively, the implants were morphologically and topographically characterized. After 3 weeks of healing, the samples were retrieved for histomorphometry. The nanomechanical properties of the surrounding bone were evaluated by nanoindentation. While both implants revealed similar bone-to-implant contact, the nanoindentation demonstrated that the tissue quality was significantly enhanced around the HA-coated implants, validating the postulated hypothesis.

Prediction and detection of ovulation by the measurement of urinary pregnanetriol-3 alpha-glucuronide. A multicentre study.

The urine excretion pattern of pregnanetriol 3 alpha-glucuronide (PT-3G) throughout the menstrual cycle in 26 normal ovulating women was evaluated in a multicentre study. The concentration of PT-3G was measured by radioimmunoassay in daily samples of early morning urine (EMU) from 20 women for three consecutive cycles and from 6 women who conceived during the period of study. PT-3G was also measured in 24-h urine samples from 5 additional women. The peak of urine LH was used as a reference point for ovulation (Day 0). The EMU concentration of PT-3G in the follicular phase of 60 normal ovulatory cycles was 5.10 mumol/l +/- 0.11 (arithmetic mean +/- SE). The first PT-3G defined rise (CUSUM analysis) occurred during the late follicular phase (Days -3 to 0) with a PT-3G maximum excretion (9.69 mumol/1 +/- 0.55) on Day 0, whereas a PT-3G excretion peak occurred during mid-luteal phase (Days +5 to +9). The overall PT-3G excretion during the luteal phase (8.06 mumol/1 +/- 0.17) was significantly higher than that of the follicular phase (P less than 0.001). A further sustained increase in PT-3G excretion was noted after day +11 in the conceptional cycles. The 24-h excretion profile of PT-3G was similar to that obtained in EMU samples. No inter-centre significant variation was noticed in terms of PT-3G concentration values. The results were interpreted as demonstrating that the PT-3G excretion profile throughout the cycle exhibits a close resemblance to that of serum 17-OH progesterone. The data also indicates that although the immunoanalytical measurement of this urine steroid metabolite does not give an early sign for the occurrence of ovulation, it can be used for both the immediate prediction and the detection of ovulation.

A rapid and sensitive radioimmunoassay for norethisterone.

A direct radioimmunoassay for the measurement of norethisterone (NET) in unextracted serum samples was developed. The combined use of a highly specific unpurified antiserum and heat treatment of diluted serum samples obviated both extraction and chromatographic procedures. The direct NET assay fulfilled all the quality control parameters. When this assay was compared with other methods involving either solvent extraction and/or chromatographic purification procedures, no significant differences were observed. The overall results were interpreted as demonstrating that this simple, rapid and reliable NET assay can be used as a helpful tool in metabolic and pharmacokinetic studies of this contraceptive progestogen.