Plasma Activation of Microplates Optimized for One-Step Reagent-Free Immobilization of DNA and Protein.

Activated microplates are widely used in biological assays and cell culture to immobilize biomolecules, either through passive physical adsorption or covalent cross-linking. Covalent attachment gives greater stability in complex biological mixtures. However, current multistep chemical activation methods add complexity and cost, require specific functional groups, and can introduce cytotoxic chemicals that affect downstream cellular applications. Here, we show a method for one-step linker-free activation of microplates by energetic ions from plasma for covalent immobilization of DNA and protein. Two types of energetic ion plasma treatment were shown to be effective: plasma immersion ion implantation (PIII) and plasma-activated coating (PAC). This is the first time that PIII and PAC have been reported in microwell plates with nonflat geometry. We confirm that the plasma treatment generates radical-activated surfaces at the bottom of wells despite potential shadowing from the walls. Comprehensive surface characterization studies were used to compare the PIII and PAC microplate surface composition, wettability, radical density, optical properties, stability, and biomolecule immobilization density. PAC plates were found to have more nitrogen and lower radical density and were more hydrophobic and more stable over 3 months than PIII plates. Optimal conditions were obtained for high-density DNA (PAC, 0 or 21% nitrogen, pH 3-4) and streptavidin (PAC, 21% nitrogen, pH 5-7) binding while retaining optical properties required for typical high-throughput biochemical microplate assays, such as low autofluorescence and high transparency. DNA hybridization and protein activity of immobilized molecules were confirmed. We show that PAC activation allows for high-density covalent immobilization of functional DNA and protein in a single step on both 96- and 384-well plates without specific linker chemistry. These microplates could be used in the future to bind other user-selected ligands in a wide range of applications, for example, for solid phase polymerase chain reaction and stem cell culture and differentiation.

Linker-protein G mediated functionalization of polystyrene-encapsulated upconversion nanoparticles for rapid gene assay using convective PCR.

The authors report on a simplified approach to encapsulate upconversion nanoparticles (UCNPs) in polystyrene spheres by mini-emulsion polymerisation. The resulting particles (PS-UCNP) are hydrophilic, stable and suitable for biomolecular recognition and biosensing applications. Also, a strategy was developed for bioconjugation of antibodies onto the surface of the PS-UCNPs by using the bifunctional fusion protein linker-protein G (LPG). LPG mediates the functionalisation of PS-UCNPs with antibodies against digoxigenin allowing for specific labelling of convective PCR (cPCR) amplicons. Lambda DNA was amplified using cPCR on a heat block for 30 min using the digoxigenin labelled forward and biotin labelled reverse primers. The antibody functionalised PS-UCNPs bind to the digoxigenin end of the cPCR amplicons. Finally, the streptavidin labelled magnetic beads were used to selectively capture the PS-UCNP-labelled cPCR amplicons and the upconversion signal was detected at 537 nm under 980 nm excitation. This sandwich approach enables direct recognition of the target lambda DNA with a detection limit of 103 copies µL-1. The upconversion signal decreased proportionally to the concentration of the lambda DNA with a linear response between 107 and 103 copies of DNA. Graphical abstract Schematic representation of polystyrene-encapsulated upconversion nanoparticles (PS-UCNPs) prepared by mini-emulsion polymerisation. The PS-UCNPs were functionalised with anti-digoxigenin antibody using the fusion protein linker-protein G (LPG). Detection of digoxigenin-labelled amplicons is achieved (a) by using the antibody-functionalised LPG@PS-UCNP labels; (b) magnetic separation, and (c) 980 nm laser light for detection of the green upconversion luminescence peaking at 537 nm.

A plasma ion bombardment process enabling reagent-free covalent binding of multiple functional molecules onto magnetic particles.

We report a plasma immersion ion implantation process for functionalizing polymer coated magnetic particles, converting them into a universal covalent binding platform for the simultaneous binding of multiple molecular agents without the need for specialised chemical linking groups. As an example, we demonstrate the improvement of wettability and the control of surface charge of polystyrene coated magnetic particles, enhancing biomolecule attachment density with strong covalent binding. We demonstrate the preparation of multifunctional magnetic particles where two or more types of molecule are co-immobilized. This enables a platform technology with simultaneous multiple covalent binding of molecules drawn from oligonucleotides, antibodies and enzymes suitable for targeted nanoparticle diagnostic and therapies.

Increasing binding density of yeast cells by control of surface charge with allylamine grafting to ion modified polymer surfaces.

Plasma immersion ion implantation (PIII) treatment of polymers creates a biointerface capable of direct covalent immobilization of biomolecules. The immobilization of protein molecules is achieved by covalent bonds formed between embedded radicals on the treated surface and amino acid side chains and cells can be immobilized through cell-wall proteins. The attachment density of negatively charged entities on a PIII treated surface is inhibited by its negative surface charge at neutral pH. To reduce the negative charge of PIII treated surfaces in phosphate buffer (pH 7.4, 11mM), we develop an effective approach of grafting allylamine monomers onto the treated surface. The results reveal reactions between allylamine and radicals on the PIII treated surface. One of these triggers polymerization, increasing the number of amine groups grafted. As a consequence, the PIII treated polystyrene surface after allylamine exposure becomes more hydrophobic and less negatively charged in phosphate buffer. Using yeast cells as an example, we have shown a significant improvement (6-15 times) of cell density immobilized on the PIII treated surface after exposure to allylamine.

Influence of pH on yeast immobilization on polystyrene surfaces modified by energetic ion bombardment.

Plasma immersion ion implantation (PIII) treatment is a novel method for immobilizing yeast on polymer surfaces by covalent linkage. This study of the immobilization of Saccharomyces cerevisiae in both rehydrated and cultured forms showed that the density of cell attachment on PIII treated polystyrene (PS) was strongly dependent on the pH of the incubation medium and was higher for rehydrated yeast. A study of the surface charge was undertaken to explain this result. A high density of cell attachment occurs in acidic conditions (pH 3-5) and a significantly reduced cell density occurs in neutral and alkaline buffers (pH 6-10) for both types of yeast. Force measurements using atomic force microscopy show that a negative charge is present on polystyrene after PIII treatment. The charge is close to zero at pH 3 to pH 5 and increasingly negative from pH 6 to pH 10. Both rehydrated yeast and cultured yeast have negative electrophoretic mobility in the pH range studied. The repulsive forces are weak in acidic buffers and stronger in neutral and alkaline buffers, in good agreement with the cell densities observed. Rehydrated yeast cells are found to be more hydrophobic than cultured yeasts in the same buffer. The higher hydrophobicity explains the higher attachment of rehydrated yeast compared to cultured yeast.

Ion-implanted polytetrafluoroethylene enhances Saccharomyces cerevisiae biofilm formation for improved immobilization.

The surface of polytetrafluoroethylene (PTFE) was modified using plasma immersion ion implantation (PIII) with the aim of improving its ability to immobilize yeast. The density of immobilized cells on PIII-treated and -untreated PTFE was compared as a function of incubation time over 24 h. Rehydrated yeast cells attached to the PIII-treated PTFE surface more rapidly, with higher density, and greater attachment strength than on the untreated surface. The immobilized yeast cells were removed mechanically or chemically with sodium hydroxide and the residues left on the surfaces were analysed with Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). The results revealed that the mechanism of cell attachment on both surfaces differs and a model is presented for each. Rapid attachment on the PIII-treated surface occurs through covalent bonds of cell wall proteins and the radicals on the treated surface. In contrast, on the untreated surface, only physisorbed molecules were found in the residue and lipids were more highly concentrated than proteins. The presence of lipids in the residue was found to be a consequence of damage to the plasma membrane during the rehydration process and the increased cell stress was also apparent by the amount of Hsp12 in the protein residue. The immobilized yeast cells on PIII-treated PTFE were found to be as active as yeast cells in suspension.