A study on a broadband photodetector based on hybrid 2D copper oxide/reduced graphene oxide.

These days, photodetectors are a crucial part of optoelectronic devices, ranging from environmental monitoring to international communication systems. Therefore, fabricating these devices at a low cost but obtaining high sensitivity in a wide range of wavelengths is of great interest. This report introduces a simple solution-processed hybrid 2D structure of CuO and rGO for broadband photodetector applications. Particularly, 2D CuO acts as the active material, absorbing light to generate electron-hole pairs, while 2D rGO plays the role of a transport layer, driving charge carriers between two electrodes. Our device exhibits remarkable sensitivity to a wide wavelength range from 395 nm to 945 nm (vis-NIR region). Interestingly, our devices' responsivity and photoconductive gain were calculated (under 395 nm wavelength excitation) to be up to 8 mA W-1 and 28 fold, respectively, which are comparable values with previous publications. Our hybrid 2D structure between rGO and CuO enables a potential approach for developing low-cost but high-performance optoelectronic devices, especially photodetectors, in the future.

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods.

Optoelectronic devices have various applications in medical equipment, sensors, and communication systems. Photodetectors, which convert light into electrical signals, have gained much attention from many research teams. This study describes a low-cost photodetector based on CuO nanoparticles and ZnO nanorods operating in a wide range of light wavelengths (395, 464, 532, and 640 nm). Particularly, under 395 nm excitation, the heterostructure device exhibits high responsivity, photoconductive gain, detectivity, and sensitivity with maximum values of 1.38 A·W-1, 4.33, 2.58 × 1011 Jones, and 1934.5% at a bias of 2 V, respectively. The sensing mechanism of the p-n heterojunction of CuO/ZnO is also explored. Overall, this study indicates that the heterostructure of CuO nanoparticles and ZnO nanorods obtained via a simple and cost-effective synthesis process has great potential for optoelectronic applications.

Developing low-cost nanohybrids of ZnO nanorods and multi-shaped silver nanoparticles for broadband photodetectors.

Photodetectors are essential elements for various applications like fiber optic communication systems, biomedical imaging, and so on. Thus, improving the performance and reducing the material costs of photodetectors would act as a motivation toward the future advancement of those applications. This study introduces the development of a nanohybrid of zinc oxide nanorods (ZnONRs) and multi-shaped silver nanoparticles MAgNPs through a simple solution process; in which ZnONRs are hybridized with MAgNPs to enable visible absorption through the surface plasmon resonance (SPR) effect. The photodetector based on ZnONRs/MAgNPs is responsive to visible light with representative wavelengths of 395, 464, 532 and 640 nm, and it exhibits high responsivity (R), photoconductive gain (G) and detectivity (D). The maximum R is calculated from the fitting curve of the responsivity-power relation with the value of 5.35 × 103 (mA W-1) at 395 nm excitation. The highest G and D reach 8.984 and 3.71 × 1010 Jones at that wavelength. This reveals the promise of our innovative broadband photodetector for practical usage.

Ag/SiO2 nanoparticles stabilization with lignin derived from rice husk for antifungal and antibacterial activities.

Antibacterial materials have been developed for a long time but bacteria adapt very quickly and become resistant to these materials. This study focuses on the synthesis of a hybrid material system from lignin and silver/silica nanoparticles (Lig@Ag/SiO2 NPs) which were used against bacteria including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) and inhibited the growth of the fungal Aspergillus flavus (A. flavus). The results showed that the spherical diameter of Lig@Ag/SiO2 NPs has narrow Gaussian distribution with a range from 15 nm to 40 nm in diameter. Moreover, there was no growth of E. coli in samples containing Lig@Ag/SiO2 NPs during 72-h incubation while colonies of S. aureus were only observed at high concentrations (106 CFU/mL) although both species of bacteria were able to thrive even at low bacterial concentration when they were exposed to Ag/SiO2 or lignin. For fungal resistance results, Lig@Ag/SiO2 NPs not only reduced mycelial growth but also inhibited sporulation in A. flavus, leading to decreasing the spreading of spores into the environment. This result represents a highly effective fungal growth inhibition of Lig@Ag/SiO2 NPs compared to lignin or Ag/SiO2, which could not inhibit the growth of sporulation.

Highly Functional Materials Based on Nano-Lignin, Lignin, and Lignin/Silica Hybrid Capped Silver Nanoparticles with Antibacterial Activities.

Rice husk is one of the most abundant biomass resources in the world, yet it is not effectively used. This study focuses on the sustainably rice-husk-extracted lignin, nano-lignin (n-Lignin), lignin-capped silver nanoparticles (LCSN), n-Lignin-capped silver nanoparticles (n-LCSN), and lignin-capped silica-silver nanoparticles (LCSSN), and using them for antibacterial activities. The final n-Lignin-based products had a sphere-like structure, of which the size varied between 50 and 80 nm. We found that while n-Lignin and lignin were less effective against Escherichia coli than against Staphylococcus aureus, n-Lignin/lignin-based hybrid materials, i.e., n-LCSN, LCSN, and LCSSN, were better against E. coli than against S. aureus. Interestingly, the antimicrobial behaviors of n-LCSNs could be further improved by decreasing the size of n-Lignin. Considering the facile, sustainable, and eco-friendly method that we have developed here, it is promising to use n-Lignin/lignin-based materials as highly efficient antimicrobials without environmental concerns.

Improved Synthesis of Ag/SiO2 Colloidal Nanocomposites and Their Antibacterial Activity Against Ralstonia solanacearum 15.

Ag/SiO2 colloidal nanocomposites (NCs) were prepared through the semi-continuous chemical reduction of silver ions on a silica surface; NaBH4 was used as a primary reducing agent, while carboxymethyl cellulose (CMC) served as a secondary reductant and a stabilizer at low temperature. Silver nanoparticles (AgNPs) of an average diameter of 3.89±0.18 nm were uniformly and densely dispersed on the SiO2 surface, forming 218.6-nm-sized Ag/SiO2 NCs. The zeta potential of the Ag/SiO2 NCs (-92.6 mV) was more negative than that of silica (-24 mV), indicating their high long-term stability. Furthermore, their proposed formation mechanism was confirmed via Fourier transform infrared spectroscopy. Then, the bactericidal effect of the Ag/SiO2 was evaluated based on their minimal inhibitory concentration (MIC) against Ralstonia solanacearum 15 (R. solanacearum 15); it was 62.5 ppm, much lower than that of conventional AgNPs (500 ppm). Therefore, these highly stable Ag/SiO2 colloidal NCs with more effective antibacterial activity than conventional AgNPs are a promising nanopesticide in agriculture.